Temperature‐Responsive Glycopolymer Brushes Synthesized via RAFT Polymerization Using the Z‐group Approach

Summary: Stimuli‐responsive glycopolymer brushes composed of N‐acryloyl glucosamine (AGA) and N‐isopropylacrylamide (NIPAAm) were prepared using RAFT polymerization. The RAFT agent was immobilized on the surface of a treated silicon waver via covalent attachment using the Z‐group. PAGA and PNIPAAm brushes showed a linear increase in brush thickness with the consumption of monomer in solution. The polymers generated in solution confirm the living behavior with the molecular weight increasing linearly with monomer conversion while the molecular weight distribution remains narrow. Additionally, the ability of PAGA brushes to grow further in the presence of NIPAAm reveals the presence of an active RAFT end group indicative of a living system. PAGA and PNIPAAm homopolymer brushes up to 30 nm were grown using this technique. PAGA brushes were utilized for further chain extension to generate stimuli‐responsive brushes with block structures of PAGA and PNIPAAm. The PAGA‐block‐PNIPAAm brushes were found to grow in size with the consumption of NIPAAm. Contact angle measurements confirm the suggested mechanism showing that the second monomer is incorporated between the first layer and the silicon surface as expected using the Z‐group approach.

Structure of the stimuli‐responsive glycopolymer brushes.     

A Novel Temperature‐Responsive Polymer as a Gene Vector

A temperature‐responsive polymer poly{2‐(dimethylamino)ethyl methacrylate‐co‐[cis‐butenedioic anhydride‐poly[(N‐isopropylacrylamide)‐co‐(butyl methacrylate)]]} (PDMNIB) was synthesized by free radical polymerization. The polymer had a significant temperature‐responsive behavior with a lower critical solution temperature (LCST) at 20 °C. Gel retardation assay showed that PDMNIB could efficiently interact with DNA. Dynamic light scattering (DLS) and zeta potential measurement indicated that the average sizes and the surface electric charges of the PDMNIB/DNA complexes could be changed by temperature. Due to the thermosensitive interaction between PDMNIB and DNA, the gene transfection efficiency of PDMNIB could be improved by temperature.

     

Stimuli‐Responsive Semi‐Fluorinated Polymer Brushes on Porous Silica Substrates

Summary: A diblock copolymer brush consisting of poly(methyl acrylate)‐block‐poly(pentafluoropropyl acrylate) (Si/SiO₂//PMA‐b‐PPFA) was synthesized on a porous silica substrate. The brush was exposed to selective solvents, as well as thermal treatments, to induce a surface rearrangement. The rearrangement resulted in the selective loss or creation of an ultrahydrophobic layer by location of the fluoropolymer segment. This work demonstrates that surface rearrangements observed on flat surfaces can be transferred to porous substrates.

Image of a water droplet in contact with an Si/SiO₂//PMA‐b‐PPFA ultrahydrophobic polymer brush, synthesized from a porous silica substrate.     

Dual Thermo‐ and pH‐Responsive Zwitterionic Sulfobataine Copolymers for Oral Delivery System

A novel oral delivery system consisting of thermoresponsive zwitterionic poly(sulfobetaine methacrylate) (PSBMA) and pH‐responsive poly(2‐(diisopropylamino)ethyl methacrylate) (PDPA) is synthesized via free radical polymerization. This copolymer can self‐aggregate into nanoparticles via electrostatic attraction between ammonium cation and sulfo‐anion of PSBMA and successfully encapsulate anticancer drug, curcumin (CUR), with highest loading content of 2.6% in the P(SBMA‐co‐DPA) nanoparticles. The stimuli‐responsive phase transition behaviors of P(SBMA‐co‐DPA) copolymers at different pH buffer solution show pH‐dependent upper critical solution temperature (UCST) attributed to the influence of protonation/deprotonation of the pH‐responsive DPA segments. Through the delicate adjustment of the PSBMA/PDPA molar ratios, the stimuli‐responsive phase transition could be suitable for physiological environment. The kinetic drug release profiles demonstrate that P(SBMA‐co‐DPA) nanoparticles have the potential as oral delivery carriers due to their effective release of entrapped drugs in the stimulated intestinal fluid and preventing the deterioration of drug in stimulated gastric fluid.

     

Multi‐Stimuli‐Responsive Polymer Materials: Particles,Films, and Bulk Gels

Stimuli‐responsive polymers have received tremendous attention from scientists and engineers for several decades due to the wide applications of these smart materials in biotechnology and nanotechnology. Driven by the complex functions of living systems, multi‐stimuli‐responsive polymer materials have been designed and developed in recent years. Compared with conventional single‐ or dual‐stimuli‐based polymer materials, multi‐stimuli‐responsive polymer materials would be more intriguing since more functions and finer modulations can be achieved through more parameters. This critical review highlights the recent advances in this area and focuses on three types of multi‐stimuli‐responsive polymer materials, namely, multi‐stimuli‐responsive particles (micelles, micro/nanogels, vesicles, and hybrid particles), multi‐stimuli‐responsive films (polymer brushes, layer‐by‐layer polymer films, and porous membranes), and multi‐stimuli‐responsive bulk gels (hydrogels, organogels, and metallogels) from recent publications. Various stimuli, such as light, temperature, pH, reduction/oxidation, enzymes, ions, glucose, ultrasound, magnetic fields, mechanical stress, solvent, voltage, and electrochemistry, have been combined to switch the functions of polymers. The polymer design, preparation, and function of multi‐stimuli‐responsive particles, films, and bulk gels are comprehensively discussed here.     

In situ Synthesis of Magnetic Iron Oxide Nanoparticles in Thermally Responsive Alginate‐Poly(N‐isopropylacrylamide) Semi‐Interpenetrating Polymer Networks

A novel semi‐interpenetrating polymer network based on alginate and poly(N‐isopropylacrylamide) (PNiPAAm) has been synthesized that shows response to temperature and magnetic fields. Highly homogeneous porous hydrogels are obtained by copolymerizing N‐isopropylacrylamide and bis‐acrylamide in the presence of an aqueous alginate solution. The synthesis of magnetic iron oxides by in‐situ oxidation of iron cations coordinated to the alginate network results in a hydrogel with an enhanced deswelling rate with respect to pure PNiPAAm.

     

Novel pH‐ and Temperature‐Responsive Block Copolymers with Tunable pH‐Responsive Range

A series of novel pH‐ and temperature‐responsive diblock copolymers composed of poly(N‐isopropylacrylamide) (PNIPAM) and poly[(L ‐glutamic acid)‐co‐(γ‐benzyl L ‐glutamate)] [P(GA‐co‐BLG)] were prepared. The influence of hydrophobic benzyl groups on the phase transition of the copolymers was studied for the first time. With increasing BLG content in P(GA‐co‐BLG) block, the thermal phase transition of the diblock copolymer became sharper at a designated pH and the critical curve of phase diagram of the diblock copolymer shifted to a higher pH region. Notably, when the BLG content in P(GA‐co‐BLG) block was more than 30 mol.‐%, the diblock copolymer responded sharply to a narrow pH change in the region of pH 7.4–5.5.

     

Stimuli‐Responsive Hybrid Coatings of Polyelectrolyte Multilayers and Nano‐Patterned Polymer Brushes

A new type of polymeric hybrid coating is created by layer‐by‐layer deposition of polyelectrolyte multilayers (PEM) onto nano‐patterned polymer brushes (NPB). The PEM is a hydrogen‐bonded multilayer consisting of poly(acrylic acid) and poly(acrylamide) and the NPB is derived from a surface reactive rod‐coil block copolymer, polystyrene‐block‐poly[3‐(triethoxysilyl)propylisocyanate]. The thickness of the PEM coating is optimized with respect to the height of the NPB mounds, to yield PEM/NPB hybrid coatings with unique nano‐embossed or nano‐porous structures that can be interchangeable by heating and moisture annealing. The hybrid coating is patternable by the micro‐contact printing method. The results demonstrate that the combination of surface‐bound, hydrophobic NPB layer with hydrophilic PEM films at the nanoscopic level offers a new organic hybrid coating with novel surface properties.

     

Facile Fabrication of Thermo‐Responsive and Reduction‐Sensitive Polymeric Micelles for Anticancer Drug Delivery

The development of thermo‐responsive and reduction‐sensitive polymeric micelles based on an amphiphilic block copolymer poly[(PEG‐MEMA)‐co‐(Boc‐Cyst‐MMAm)]‐block‐PEG (denoted PEG‐P‐SS‐HP) for the intracellular delivery of anticancer drugs is reported. PTX, as model drug, was loaded into the PEG‐P‐SS‐HP micelles with an encapsulation efficiency >90%, resulting in a high drug loading content (up to 35 wt%). The PTX‐loaded PEG‐P‐SS‐HP micelles show slow drug release in PBS and rapid release after incubation with DTT. The PTX‐loaded micelles display a better cytotoxic effect than the free drug, whereas empty micelles are found to be non‐toxic. The thermo‐responsive and reduction‐sensitive polymeric micelles described may serve as promising carriers for cytostatic drugs.

     

Gold Nanoparticles Functionalized by a Dextran‐Based pH‐ and Temperature‐Sensitive Polymer

A dextran‐based dual‐sensitive polymer is employed to endow gold nanoparticles with stability and pH‐ and temperature‐sensitivity. The dual‐sensitive polymer is prepared by RAFT polymerization of N‐isopropylacrylamide from trithiocarbonate groups linked to dextran and succinoylation of dextran after polymerization. The functionalized nanoparticles show excellent stability under various conditions and can be stored in powder‐form. UV and DLS measurements confirm that the temperature‐induced optical changes and aggregation behaviors of the particles are strongly dependent on pH.

     

New Strategy to Access Dual‐Stimuli‐Responsive Triple‐Shape‐Memory Effect in a Non‐overlapping Pattern

Multistimuli‐responsive shape‐memory polymers are highly desirable in various applications, and numerous modes have been developed in recent years. However, most of them need to reprogram before they are ready to respond to another stimulus while one is triggered. Here, a new strategy is developed to achieve dual‐stimuli‐responsive triple‐shape memory with non‐overlapping effect in one programming cycle. Here, a series of poly(l ‐lactide)‐poly(tetramethylene oxide) glycol copolymers (PLA‐PTMEG‐A) is prepared by selected dangling photoresponsive anthracene moieties on the crystalline PTMEG backbone. The architectures of the copolymers are well‐controlled in order to keep a good balance between the crystallinity of the soft segment and the mobility of the anthracene moieties. Thus, PLA‐PTMEG‐A's can respond to heat and light with non‐overlapping effect. The thermally‐induced shape‐memory effect (TSME) is realized by the crystallization–melting transition of PTMEG soft segments, while the light‐induced shape‐memory effect (LSME) is achieved by the reversible photodimerization of anthracene groups. In view of the non‐overlapping effect of TSME and LSME in the copolymers, a triple‐shape‐memory effect triggered by dual‐stimuli is realized in one programming and recovery cycle.

     

Polymer Micro‐ and Nanocapsules as Biological Carriers with Multifunctional Properties

The design and development of multifunctional polymer capsules with controlled chemical composition and physical properties has been the focus of academic and industrial research in recent years. Especially in the biomedical field, the formulation of novel polymer‐based encapsulation systems for the early‐stage disease diagnostic and effective delivery of bioactive agents represent one of the most rapidly advancing areas of science. The stimuli‐responsive release of cargo molecules from the carrier gains remarkable attention for in vitro and in vivo delivery of contrast agents, genes, and pharmaceutics. In this Review, the current status and the challenges of different polymer‐based micro‐ and nanocapsule formulations are considered, emphasizing on their potential biological application as carriers for specific drug targeting and controlled release upon applying of external stimulus.     

Synthesis and Characterization of PEG‐Based Drug‐Responsive Biohybrid Hydrogels

Interactive materials being responsive to a biocompatible stimulus represent a promising approach for future therapeutic applications. In this study, we present a novel biohybrid material synthesized from biocompatible components being stimulus‐responsive to the pharmaceutically approved small‐molecule novobiocin. The hydrogel design is based on the gyrase B (GyrB) protein, which is covalently grafted to multi‐arm polyethylene glycol (PEG) using a Michael‐type addition reaction. Upon addition of the GyrB‐dimerizing substance coumermycin, stable hydrogels form which can be dissolved in a dose‐adjustable manner by the antibiotic novobiocin. The switchable properties of this PEG‐based hydrogel are favorable for future applications in tissue engineering and as externally controlled drug depot.     

Terminal Modification with 1‐Adamantylamine to Endow Hyperbranched Polyamidoamine with Thermo‐/pH‐Responsive Properties

A novel terminal modification agent to endow hyperbranched polyamidoamine (HPAMAM) with thermo‐/pH‐responsive properties is reported. HPAMAM with terminal vinyl groups is first synthesized and then end‐capped by 1‐adamantylamine (ADA). The resulting hyperbranched polymer (HPAMAM‐ADA) shows interesting thermo‐responsive properties in aqueous solution, which have been investigated by UV‐vis spectroscopy, optical microscopy, and ¹H NMR spectroscopy. The lower critical solution temperature can be controlled by adjusting the end‐capping ratio of ADA. In addition, HPAMAM‐ADA exhibits a pH‐dependent water solubility. This pH‐responsive behavior is also studied.

     

Dextran Hydrogels Containing Poly(N‐isopropylacrylamide) as Grafts and Cross‐Linkers Exhibiting Enzymatic Regulation in a Specific Temperature Range

Summary: Specific temperature‐responsive biodegradable hydrogels were synthesized and characterized in terms of their regulation of enzymatic accessibility based on the physical properties of the temperature‐responsive polymers. The hydrogels consist of glycidyl methacrylate‐modified dextran grafted with the poly(N‐isopropylacrylamide) (PNIPAAm) homopolymer, and cross‐linked by co‐polymerization with NIPAAm and N,N‐dimethylacrylamide (DMAAm). The coil‐globule change in the grafted poly(NIPAAm) chains and only a slight dehydration of the poly(NIPAAm‐co‐DMAAm) cross‐linkers are effective in controlling the enzymatic degradation over a specific temperature range.

The thermo‐responses of the graft chains (steric hindrance) and the crosslinkers (slight deswelling of the hydrogel networks) control the enzymatic degradation of the hydrogel.     

Polymer Nanoparticles Based on Pyrene‐Functionalized Poly(acrylic acid) for Controlled Release under Photo and pH Stimulation

A novel photo and pH‐responsive amphiphilic pyrene‐functionalized polymer is synthesized by the esterification reaction between poly(acryloyl chloride) and pyrenemethanol and subsequent hydrolysis of the unreacted acylchloride groups. This random copolymer consists of hydrophobic pyrene‐containing acrylate units and hydrophilic acrylic acid units, which can self‐assemble into nanoparticles in water. Under UV irradiation, the nanoparticles can be disrupted with decreasing particle number resulted from the photolysis of pyrenylmethyl esters, where the hydrophobic segments are converted to hydrophilic acrylic acids; at low pH, the acrylic acid segments are protonated and collapsed, thus the nanoparticles will be shrunk and aggregated; at high pH, the nanoparticles change to fractal structures owing to the aggregation of partially dissociated nanoparticles and the subsequent structural reorganization of the clusters. The controlled release of Nile Red from the nanoparticles stimulated by photo and pH separately and synergistically is demonstrated. The nanoparticles self‐assembled from the dual‐stimuli‐sensitive polymer can be used as a new nanocarrier and find their applications in delivery system.

     

Synthesis of poly[N‐isopropylacrylamide‐g‐poly(ethylene glycol)] with a reactive group at the poly(ethylene glycol) end and its thermosensitive self‐assembling character

Poly[N‐isopropylacrylamide‐g‐poly(ethylene glycol)]s with a reactive group at the poly(ethylene glycol) (PEG) end were synthesized by the radical copolymerization of N‐isopropylacrylamide with a PEG macromonomer having an acetal group at one end and a methacryloyl group at the other chain end. The temperature dependence of the aqueous solutions of the obtained graft copolymers was estimated by light scattering measurements. The intensity of the light scattering from aqueous polymer solutions increased with increasing temperature. In particular, at temperatures above 40°C, the intensity abruptly increased, indicating a phase separation of the graft copolymer due to the lower critical solution temperature (LCST) of the poly(N‐isopropylacrylamide) segment. No turbidity was observed even above the LCST, and this suggested a nanoscale self‐assembling structure of the graft copolymer. The dynamic light scattering measurements confirmed that the size of the aggregate was in the range of several tens of nanometers. The acetal group at the end of the PEG graft chain was easily converted to the aldehyde group by an acid treatment, which was analyzed by ¹H NMR. Such a temperature‐induced nanosphere possessing reactive PEG tethered chains on the surface is promising for new nanobased biomedical materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1457–1469, 2006     

Redox‐ and pH‐Responsive Cysteamine‐Modified Poly(aspartic acid) Showing a Reversible Sol–Gel Transition

Synthesis and characterization of a pH‐ and redox‐sensitive hydrogel of poly(aspartic acid) are reported. Reversible gelation and dissolution are achieved both in dimethylformamide and in aqueous medium via a thiol‐disulphide interconversion in the side chain of the polymers. Structural changes are confirmed by Raman microscopy and rheological measurements. Injectable aqueous solutions of thiolated poly(aspartic acid) can be converted into mechanically stable gels by oxidation, which can be useful for drug encapsulation and targeted delivery. Reduction‐facilitated release of an entrapped drug from disulphide cross‐linked hydrogels is studied.

     

Co‐delivery of 10‐Hydroxycamptothecin with Doxorubicin Conjugated Prodrugs for Enhanced Anticancer Efficacy

Well‐defined amphiphilic linear‐dendritic prodrugs (MPEG‐b‐PAMAM‐DOX) are synthesized by conjugating doxorubicin (DOX), to MPEG‐b‐PAMAM through the acid‐labile hydrazone bond. The amphiphilic prodrugs form self‐assembled nanoparticles in deionized water and encapsulate the hydrophobic anticancer drug 10‐hydroxycamptothecin (HCPT) with a high drug loading efficiency. Studies on drug release and cellular uptake of the co‐delivery system reveal that both drugs are released in a pH‐dependent manner and effectively taken up by MCF‐7 cells. In vitro methyl thiazolyl tetrazolium (MTT) assays and drug‐induced apoptosis tests demonstrate the HCPT‐loaded nanoparticles suppress cancer cell growth more efficiently than the MPEG‐b‐PAMAM‐DOX prodrugs, free HCPT, and physical mixtures of MPEG‐b‐PAMAM‐DOX and HCPT at equivalent DOX or HCPT doses.