Macroporous temperature‐sensitive poly(N‐isopropylacrylamide) (PNIPA) hydrogels were prepared by a novel phase‐separation technique to improve the response properties. In comparison with a conventional PNIPA hydrogel prepared in water, these macroporous hydrogels, prepared by polymerization in aqueous sucrose solutions, have higher swelling ratios at temperatures below the lower critical solution temperature and exhibit much faster response rates to temperature changes.
Scanning electron microscopy image of the surface of a PNIPA hydrogel, prepared in 1.50 M aqueous sucrose solution. 相似文献
Summary: Monodisperse thermosensitive PS‐NIPA core‐shell particles composed of a PS core and a cross‐linked PNIPA shell can be successfully synthesized by a novel method: photoemulsion polymerization. Cryo‐TEM images indicate clearly the core‐shell morphology of the PS‐NIPA particles: A homogeneous regular PNIPA shell has been affixed on the spherical PS core. DLS measurements indicate that the obtained PS‐NIPA latex particles are thermosensitive. The shell of PNIPA networks with different cross‐linking densities can shrink and re‐swell with temperature and the volume transition temperature is around 32 °C in all cases.
Cryo‐TEM image of PS‐NIPA core‐shell particles. 相似文献
Spherical single‐chain‐particles of poly(N‐isopropylacrylamide) were prepared in aqueous solution above the lower critical solution temperature upon the addition of sodium dodecyl sulfate. The size of the single‐chain‐particles was investigated by means of transmission electron microscopy and viscosity measurements of the corresponding solutions, indicating the absence of inter‐chain entanglements among the single‐chain‐particles.
Schematic of the preparation of PNIPAM single‐chain‐globules in solution. 相似文献
Low‐cost, responsive poly(N‐isopropylacrylamide)/polystyrene composite films were prepared by a facile electrospinning technique. The surface structures and wettabilities of the composite films are tunable by simply controlling the concentration of polymer. With a proper proportion of each polymer, the wettability of the surface can be switched between superhydrophilicity and superhydrophobicity when the temperature is changed from 20 °C to 50 °C. The combination of a stimuli‐responsive polymer with micro/nanostructures on the surface of the composite film contributes to this unique surface property.
The extraordinary mechanical and swelling/deswelling properties of nanocomposite (NC) gels are attributed to their unique organic (polymer)/inorganic (clay) network structure. In this study, poly(N‐isopropylacrylamide) (PNIPA) was successfully separated from an NC gel network by decomposing the clay (hectorite) using hydrofluoric acid (HF). A very low HF concentration (0.2 wt.‐%) was adequate for the decomposition of the clay without causing any damage to PNIPA. The separated PNIPA had a high (=5.5 × 106 g · mol−1). Also, was almost constant regardless of the clay concentration (Cclay = 1–25 × 10−2 mol · l−1), even though the properties of the NC gel varied widely over this Cclay range. Comparisons of NC gels, PNIPA, and SiO2‐NC gels indicated that the clay platelets specifically play an important role in NC gels.
A novel semi‐interpenetrating polymer network based on alginate and poly(N‐isopropylacrylamide) (PNiPAAm) has been synthesized that shows response to temperature and magnetic fields. Highly homogeneous porous hydrogels are obtained by copolymerizing N‐isopropylacrylamide and bis‐acrylamide in the presence of an aqueous alginate solution. The synthesis of magnetic iron oxides by in‐situ oxidation of iron cations coordinated to the alginate network results in a hydrogel with an enhanced deswelling rate with respect to pure PNiPAAm.
In this paper, self‐assembled polymeric toroids formed by a temperature‐driven process are reported. Rhodamine B (RhB) end‐capped poly(N‐isopropylacrylamide) (PNIPAAm) demonstrating a lower critical solution temperature (LCST) is prepared. In a two‐phase system, the polymer in the aqueous phase could move to the chloroform phase on raising the temperature above its LCST. This temperature‐driven process results in the formation of polymeric toroids in the chloroform phase, and the strategy affords a new pathway to toroidal self‐assembly of polymers. Moreover, the photoluminescent behavior of the RhB end‐capped PNIPAAm species formed by the process is also studied and discussed.
A macroporous material composed of closely aggregated particles was prepared by cryo‐structuration of N‐isopropylacrylamide‐co‐N‐hydroxymethylacrylamide (NIPA‐co‐HMAm) particle suspensions. The formed structure was maintained by the formation of covalent bonds through self‐crosslinking between the particles while the system was in a semi‐frozen state thus avoiding the need to freeze‐dry the sample. This resulted in macroporous structure composed of closely aggregated thermoresponsive particles which exhibit an ultrafast temperature response. The response rate can be attributed both to the macroporous structure as well as the fast responsive properties of the individual particles.
We report a novel multifunctional material, poly(N‐isopropylacrylamide) (PNIPAAm) containing 2‐(2‐hydroxyphenyl)benzoxazole (HPBO), for sensing pH, zinc ion concentration, or temperature. By titration with zinc ions, a clear blue‐shifted emission with a high quantum efficiency was detected since the zinc complex prevented the nonradiative decay pathways of the HPBO moiety. The fluorescence characteristics of the copolymer were similar at various acidic or neutral conditions. However, a large blue shift on the emission maximum was exhibited under the basic condition, due to the disruption of the ESIPT process by the phenolate anion. The LCST affected the fluorescence properties significantly at the basic condition because the incompatibility between the PNIPAAm chain and phenolated HPBO moieties resulted in aggregation formation. The present study demonstrates that the new benzoxazole‐containing PINPAAm copolymer could be potentially used as multifunctional sensing material.
In this study, the hydrophobic liquid template method was firstly used to prepare temperature sensitive, porous poly(N‐isopropylacrylamide) (PNIPAAm) hydrogel. During the radical polymerization, hydrophobic polydimethylsiloxane (PDMS) and surfactant sodium dodecyl sulfate (SDS) were used as liquid templates and stabilizer, respectively. After removal of the liquid templates, porous PNIPAAm hydrogel was obtained. This gel exhibited superfast shrinking properties when being transferred from below to above the lower critical solution temperature (LCST), which was ascribed to the interconnected porous structures.
Poly(N‐ispropylacrylamide) [PNIPAM] is a widely studied polymer for use in biological applications due to its lower critical solution temperature (LCST) being so close to the human body temperature. Unfortunately, attempts to combine carbon nanotubes (CNTs) with PNIPAM have been unsuccessful due to poor interactions between these two materials. In this work, a PNIPAM copolymer with 1 mol‐% pyrene side group [p‐PNIPAM] was used to produce a thermoresponsive polymer capable of stabilizing both single and multi‐walled carbon nanotubes (MWNTs) in water. The presence of pyrene in the polymer chain lowers the LCST less than 4 °C and the interaction with nanotubes does not show any influence on LCST. Moreover, p‐PNIPAM stabilized nanotubes show a temperature‐dependent dispersion in water that allows the level of nanotube exfoliation/bundling to be controlled. Cryo‐TEM images, turbidity, and viscosity of these suspensions were used to characterize these thermoresponsive changes. This ability to manipulate the dispersion state of CNTs in water with p‐PNIPAM will likely benefit many biological applications, such as drug delivery, optical sensors, and hydrogels.
Stimuli‐sensitive polymer materials have limited device functionality, design and manufacturing flexibility although they are pushed to enable smart device applications. Here we demonstrate the capability of integrating thermoresponsive poly(N‐isopropylacrylamide) (PNIPAAm) hydrogels with silicon nanoribbons, and enable the stiff silicon ribbons to become adaptive and drivable by the soft environmentally sensitive substrate, such as becoming mechanically stretched and compressed on temperature change. These and related soft/hard smart devices and systems may open new opportunities in biomedical applications.
Metallo‐supramolecular polymers offer attractive possibilities to combine the properties of polymers with the characteristics offered by the metal–ligand coordination. Here we present for the first time the combination of metal‐bis(terpyridine) complexes and lower critical solution temperature (LCST) polymers that can be switched by addressing either the thermosensitive polymer or the metal complex. We describe a new strategy for the synthesis of poly(N‐isopropylacrylamide) (PNIPAM) end functionalized with a terpyridine moiety, which is further used for the preparation of FeII and ZnII‐bis(terpyridine PNIPAM). The comparison of the LCST behavior of the uncomplexed ligands and their metal complexes that bear different counter ions is included. Furthermore, the switchability of the synthesized FeII system is demonstrated by a decomplexation reaction followed by the characterization of the uncomplexed ligand.
Herein, we report an effective and rapid method to purify glutathione S‐transferase (GST) using glutathione (GSH)‐modified poly(N‐isopropylacrylamide) (pNIPAAm) and mild, thermal conditions. A chain transfer agent modified with pyridyl disulfide was employed in the reversible addition–fragmentation chain transfer (RAFT) polymerization of NIPAAm. The resulting polymer had a narrow molecular weight distribution (polydispersity index = 1.21). Conjugation of GSH to the pyridyl disulfide–pNIPAAm reached 95% within 30 min as determined by UV–Vis monitoring of the release of pyridine‐2‐thione. GST was successfully thermoprecipitated upon heating the GSH–pNIPAAm above the lower critical solution temperature (LCST). The pull down assay was repeated with bovine serum albumin (BSA) and T4 lysozyme (T4L), which demonstrated the specificity of the polymer for GST. Due to its simplicity and high efficiency, this method holds great potential for large‐scale purification of GST‐tagged proteins.
Self‐assembly of poly(2‐vinylpyridine)‐block‐poly(ϵ‐caprolactone) (P2VP‐b‐PCL) diblock copolymer in the presence of a selective solvent is investigated by transmission electron microscopy and atomic force microscopy. Addition of water into a P2VP‐b‐PCL solution in N,N‐dimethylformamide at 20 °C produces elongated truncated lozenge shaped single crystals of uniform size and shape in large quantities. The single crystals are composed of PCL single‐crystal layer sandwiched between two P2VP layers tethered on the top and bottom basal surfaces. The formation of the single crystals is found to depend on the temperature. These findings provide a facile approach to the preparation of uniform single crystals in large quantities.
Poly(N‐isopropylacrylamide) (PNIPAM) oligomer containing one adamantyl (AD) and two β‐cyclodextrin (β‐CD) moieties at the chain terminals, AD‐PNIPAM‐(β‐CD)2, was synthesized by atom transfer radical polymerization (ATRP) and successive click reactions. In aqueous solution, AD‐PNIPAM‐(β‐CD)2 spontaneously forms supramolecular thermoresponsive hyperbranched polymers via molecular recognition between AD and β‐CD moieties. To the best of our knowledge, this work represents the first report of the construction of supramolecular thermoresponsive hyperbranched polymers from well‐defined polymeric AB2 building units.
The phase behavior of graft copolymers in aqueous solution was investigated. The graft copolymers consist of poly(propylene glycol) (PPG) side chains and N,N‐dimethylacrylamide (dMA), N‐vinylimidazole (VIm), and N‐isopropylacrylamide (iPA), respectively, as backbones. Phase transition temperatures of the PPG copolymers increased with increasing the content of dMA and iPA as relatively more hydrophilic comonomers and with an increase in the degree of ionization of the incorporated VIm units.
Summary: Nitroxide‐mediated dispersion polymerization of styrene in supercritical carbon dioxide has been performed successfully at 110 °C using a new polymeric so‐called inistab species, which fulfils the dual functions of an initiator and a colloidal stabilizer. The inistab species comprised a poly(dimethylsiloxane) block and a polystyrene block end‐capped with the nitroxide N‐tert‐N‐butyl‐N‐[1‐diethylphosphono‐(2,2‐dimethylpropyl)] nitroxide (SG1). The dispersion polymerization resulted in sub‐micron sized polymer particles and polymers of narrow polydispersity.
TEM micrograph of PS particles prepared in the dispersion polymerization of S in scCO2 in the presence of PDMS(\overline M _{\rm n} = 6 500)‐b‐PS(\overline M _{\rm n} = 4 500)‐SG1 at 110 °C. 相似文献
Rapidly shrinking poly(N‐isopropyl acrylamide) (PNIPAM) hydrogels are prepared by crosslinking with self‐assembled nanogels that consist of cholesteryl‐ and methacryloyl‐substituted pullulan (CHPMA). The CHPMA nanogel (Rh = 26.4 nm) was used as a crosslinker for a hydrophilic nanodomain. Transmission electron microscopy images of the nanogel‐crosslinked PNIPAM hydrogel reveal a well‐defined nanoporous structure. The nanogel‐crosslinked PNIPAM hydrogel shows rapid shrinking based on its structure. The shrinking half‐time was ≈2 min, which is about 3 400 times faster than that of a PNIPAM hydrogel crosslinked by methylene(bisacrylamide).
