Controlled/Living Radical Polymerization of Methacrylic Monomers in the Presence of Lewis Acids: Influence on Tacticity

Summary: Atom transfer radical polymerization (ATRP) and reversible addition‐fragmentation transfer (RAFT) polymerization of N‐methyl methacrylamide and methyl methacrylate were investigated in the presence of rare‐earth triflates known to enhance polymer isotacticity. Poly(N‐methyl methacrylamide) with controlled molecular weight, low polydispersity, and enhanced isotacticity was prepared by ATRP and RAFT in the presence of catalytic amounts of yttrium trifluoromethanesulfonate or ytterbium trifluoromethanesulfonate. The tacticity of poly(N‐methyl methacrylamide) depends on the Lewis acid concentration: well‐defined polymers with predominantly either syndiotactic, atactic, or isotactic triads were prepared by adjusting the concentration of the Lewis acid. Simultaneous control of molecular weights, polydispersities, and tacticities in the polymerization of methyl methacrylate was less successful.

Free radical propagation in the presence of a Lewis acid (LA) giving rise to chelate control.     

Plasma‐Initiated Controlled/Living Radical Polymerization of Methyl Methacrylate in the Presence of 2‐Cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN)

Summary: Plasma‐initiated controlled/living radical polymerization of methyl methacrylate (MMA) was carried out in the presence of 2‐cyanoprop‐2‐yl 1‐dithionaphthalate. Well‐defined poly(methyl methacrylate) (PMMA), with a narrow polydispersity, could be synthesized. The polymerization is proposed to occur via a RAFT mechanism. Chain‐extension reactions were also successfully carried out to obtain higher molecular weight PMMA and PMMA‐block‐PSt copolymer.

Dependence of ln([M]₀/[M]) on post‐polymerization time (above), and \overline M _{\rm n} and PDI against conversion (below) for plasma initiated RAFT polymerization of MMA at 25 °C.     

Nitroxide‐Mediated Radical Dispersion Polymerization of Styrene in Supercritical Carbon Dioxide Using a Poly(dimethylsiloxane‐block‐styrene) Alkoxyamine as Initiator and Stabilizer

Summary: Nitroxide‐mediated dispersion polymerization of styrene in supercritical carbon dioxide has been performed successfully at 110 °C using a new polymeric so‐called inistab species, which fulfils the dual functions of an initiator and a colloidal stabilizer. The inistab species comprised a poly(dimethylsiloxane) block and a polystyrene block end‐capped with the nitroxide N‐tert‐N‐butyl‐N‐[1‐diethylphosphono‐(2,2‐dimethylpropyl)] nitroxide (SG1). The dispersion polymerization resulted in sub‐micron sized polymer particles and polymers of narrow polydispersity.

TEM micrograph of PS particles prepared in the dispersion polymerization of S in scCO₂ in the presence of PDMS(\overline M _{\rm n} = 6 500)‐b‐PS(\overline M _{\rm n} = 4 500)‐SG1 at 110 °C.     

Facile Access to Hydroxy‐Functional Core–Shell Microspheres via Grafting of Ethylene Oxide by Anionic Ring‐Opening Polymerization

We present a facile access route to hydroxy‐functional narrow disperse microspheres of well‐defined grafting density (GD). Ethylene oxide has been grafted from highly crosslinked poly(divinyl benzene) microspheres by anionic ring‐opening polymerization using sec‐butyllithium as activator together with the phosphazene base t‐BuP₄. Initially, core microspheres have been prepared by precipitation polymerization utilizing divinyl benzene (DVB, 80 wt.‐%). The grafting of poly(ethylene oxide) (PEO) from the surface resulted in the formation of functional core–shell microspheres with hydroxy‐terminal end groups. The number average particle diameter of the grafted microspheres was 3.6 µm and the particle weight increased by 5.7%. The microspheres were characterized by SEM, FT‐IR spectroscopy, elemental analysis, and fluorescence microscopy. The surface GD (determined via two methods) was 1.65 ± 0.06 and 2.09 ± 0.08 chains · nm⁻², respectively.

     

Chain Transfer and Efficiency of End‐Group Introduction in Free Radical Polymerization of Methyl Methacrylate in the Presence of Poly(methyl methacrylate) Macromonomer

Summary: Experimental and modeling studies of addition–fragmentation chain transfer (AFCT) during radical polymerization of methyl methacrylate in the presence of poly(methyl methacrylate) macromonomer with 2‐carbomethoxy‐2‐propenyl ω‐ends (PMMA‐CO₂Me) at 60 °C are reported. The results revealed that AFCT involving PMMA‐CO₂Me formed in situ during methyl methacrylate polymerization has a negligible effect on the molecular weight distribution.

     

Charge/Discharge Properties of Organometallic Batteries Fabricated with Ferrocene–Containing Polymers

A group of ferrocene‐containing polymers were synthesized from vinylferrocene, ethynylferrocene and 1,1′‐dibromoferrocene, and properties of the formed polymers were examined to clarify their potential as a new class of cathode‐active, charge‐storage materials for rechargeable batteries. Vinylferrocene polymerized with 2,2′‐azoisobutyronitrile (AIBN) to give a polymer with number‐average molecular weights of 2 200–5 100 g · mol⁻¹ in 12–41% yields, while ethynylferrocene and 1,1′‐dibromoferrocene polymerized with Rh catalysts and by step‐growth mechanism, respectively, to provide insoluble polymers in 71–96% yields. The capacities of organometallic rechargeable cells fabricated with poly(vinylferrocene), poly(ethynylferrocene), and poly(ferrocene) reached 105, 105, and 95 Ah · kg⁻¹, respectively. In particular, poly(vinylferrocene) displayed completely reversible charge/discharge processes featuring a constant voltage of around 3.5 V.

     

Particle Size Effects in TEMPO‐Mediated Radical Polymerization of Styrene in Aqueous Miniemulsion

Summary: 2,2,6,6‐Tetramethylpiperidinyl‐1‐oxy (TEMPO)‐mediated radical polymerization of styrene in aqueous miniemulsion at 125 °C using sodium dodecylbenzenesulfonate and poly(vinyl alcohol), respectively, as colloidal stabilizers has been investigated. The particle size had a dramatic effect on the polymerization process. Decreasing particle size led to a markedly higher polymerization rate, but less control and a lower degree of livingness. For particles with diameters greater than approximately 170 nm, the polymerization behavior was essentially the same as in the corresponding bulk system. By varying the particle size within an appropriate range, it is possible to tune the polymerization such that the polymerization rate is increased while still maintaining reasonable control and livingness.

     

Combining Steric and Electrostatic Stabilization Using Hydrophilic MacroRAFT Agents in an Ab Initio Emulsion Polymerization of Styrene

Hydrophilic (co)polymers carrying a thiocarbonyl thio end group such as poly(dimethylaminoethyl methacrylate), poly(ethylene oxide), and poly(ethylene oxide)‐block‐poly(dimethylaminoethyl methacrylate) have been evaluated as precursors of stabilizers in batch ab initio emulsion polymerization of styrene under acidic conditions to form electrosterically stabilized polystyrene latex particles. As a mixture of P(DMAEMA/H⁺Cl⁻)‐RAFT and PEO‐RAFT failed to give satisfactory results, PEO‐RAFT was used as a control agent for the RAFT polymerization of DMAEMA, and the resulting block copolymer was successfully used in ab initio styrene emulsion polymerization.

     

Cationic Salt‐Responsive Bottle‐Brush Polymers

A class of cationic bottle‐brush polymers that show ionic strength‐dependent stimuli responsiveness is prepared. Brush polymers with norbornene as backbone and quaternary ammonium (QA)‐containing polycaprolactone copolymers as side chains are synthesized by a combination of ring‐opening metathesis polymerization, ring‐opening polymerization, and click reaction. In water with low ionic strength, brush polymers are soluble due to the strong electrostatic repulsion between cationic QA groups. As the addition of salt to increase ionic strength, single brush polymers undergo a transition from extended conformation to collapsed state and finally become insoluble in solution due to the screening effect of salts that yield the once‐dominant electrostatic interactions among QA species to hydrophobic–hydrophobic interactions.

     

Living Polymerization of N,N‐Diphenylacrylamide with Triisobutylaluminum

Summary: N,N‐Diphenylacrylamide was polymerized in a living fashion with triisobutylaluminum in THF at 0 °C. The polymerization results showed an increase of molecular weight proportional to the amount of monomer consumed and a first‐order kinetics at −78 °C. The intermediates obtained with excess initiator at −78 °C revealed that the polymerization was initiated through 1,4‐addition of hydride from a triisobutyl group in the triisobutylaluminum and then proceeded through aluminum‐oxygen bond interchange.

N,N‐Diphenylacrylamide was polymerized in a living fashion with triisobutylaluminum in THF at 0 °C.     

Efficient Surface Modification of Divinylbenzene Microspheres via a Combination of RAFT and Hetero Diels‐Alder Chemistry

A combination of reversible addition fragmentation chain transfer (RAFT) polymerization and hetero Diels‐Alder (HDA) chemistry has been utilized to successfully generate functional core‐shell microspheres. Initially, precipitation polymerization in conjunction with the RAFT technique has been employed to synthesize divinylbenzene (DVB) microspheres with surface expressed RAFT groups. Subsequently, HDA cycloaddition has been performed under mild reaction conditions (50 °C, 24 h) with a diene‐functionalized poly(ε‐caprolactone) (PCL). While the successful grafting is immediately evident by optical inspection of the microspheres (color change from purple to white), X‐ray photoelectron spectroscopy (XPS), and attenuated total reflectance spectroscopy (ATR) were additionally employed to characterize the chemical composition and surface functionalization of the microspheres. Further, confocal microscopy was used to confirm the presence of grafted PCL chains after labeling them with rhodamine B.

     

RAFT Miniemulsion Polymerization Kinetics, 1 – Polymerization Rate

The polymerization kinetics of a RAFT‐mediated radical polymerization inside submicron particles (30 < D_p < 300 nm) is considered. When the time fraction of active radical period, ϕ_A, is larger than ca. 1%, the polymerization rate increases with reducing particle size, as for the cases of conventional emulsion polymerization. The rate retardation by the addition of RAFT agent occurs with or without intermediate termination in zero‐one systems. For the particles with D_p < 100 nm, the statistical variation of monomer concentration among particles may not be neglected. It was found that this monomer‐concentration‐variation (MCV) effect may slow down the polymerization rate. An analytical expression describing the MCV effect is proposed, which is valid for both RAFT and conventional miniemulsion polymerizations.

     

Fluorescently Labeled Branched Polymers and Thermal Responsive Nanoparticles for Live Cell Imaging

Branched poly(methoxy‐PEG acrylate) and thermally responsive poly(methoxy‐PEG acrylate)‐block‐poly(N‐isopropylacrylamide) are synthesized by RAFT polymerization. After reduction, these polymers are fluorescently labeled by reacting the free thiol groups with N‐(5‐fluoresceinyl)maleimide. As shown by DLS, the labeled copolymer poly(methoxy‐PEG acrylate)‐block‐poly(N‐isopropylacrylamide) forms nanoparticles at body temperature (37 °C) due to the presence of the thermosensitive poly(N‐isopropylacrylamide). These materials were used as bioprobes for imaging HUVECs in vitro and chick embryo CAM in vivo. Both labeled polymer and nanoparticles are biocompatible and can be used as efficient fluorescent bioprobes.

     

Polymer Brushes Showing Non‐Fouling in Blood Plasma Challenge the Currently Accepted Design of Protein Resistant Surfaces

Ultra‐low‐fouling poly[N‐(2‐hydroxypropyl) methacrylamide] (poly(HPMA)) brushes have been synthesized for the first time. Similar to the so far only ultra‐low‐fouling surface, poly(carboxybetaine acrylamide), the level of blood plasma fouling was below the detection limit of surface plasmon resonance (SPR, 0.03 ng · cm⁻²) despite being a hydrogen bond donor and displaying a moderate wettability, thus challenging the currently accepted views for the design of antifouling properties. The antifouling properties were preserved even after two years of storage. To demonstrate the potential of poly(HPMA) brushes for the preparation of bioactive ultra‐low fouling surfaces a label‐free SPR immunosensor for detection of G Streptococcus was prepared.

     

Preparation of Well‐Defined PVOH/C60 Nanohybrids by Cobalt‐Mediated Radical Polymerization of Vinyl Acetate

Summary: Poly(vinyl acetate) chains end‐capped by a Co(acac)₂ complex [PVAc‐Co(acac)₂] were prepared by bulk cobalt‐mediated radical polymerization (CMRP) of vinyl acetate and used for grafting fullerene (C60) with four PVAc arms at low temperature (30 °C). A photoactive water‐soluble poly(vinyl alcohol)/C60 nanohybrid was then prepared by hydrolysis of the PVAc arms of the nanohybrid. Because of photoactivity and very low cytotoxicity, this type of water‐soluble nanohybrid is very promising for the photodynamic cancer therapy.

Strategy for the preparation of PVAc/C60 nanohybrid and hydrolysis of PVAc/C60 nanohybrid into PVOH/C60 nanohybrid.     

High Conductivity PEDOT Using Humidity Facilitated Vacuum Vapour Phase Polymerisation

The synthesis of high conductivity poly(3,4‐ethylenedioxythiophene) (PEDOT) films using vacuum vapour phase polymerisation is reported. Water vapour is introduced into the chamber and results suggest that it acts as a proton scavenger during polymerisation. Process optimisation leads to PEDOT films that have high conductivity and a blue‐black appearance. Poor quality films have lower conductivity and a characteristic greenish colour. UV‐vis‐NIR spectra show that poor PEDOT films are characterised by higher absorption in the UV‐vis region and an absorption plateau in the NIR region, which suggests an increased level of disrupted conjugation along the polymer backbone or higher oligomer content. Conversely, high quality PEDOT is characterised by an extended NIR absorption tail and lower absorption in the UV‐vis region.

     

Synthesis,Microstructure, and Acidity of Poly(vinylphosphonic acid)

Summary: Vinylphosphonic acid is polymerized at 80 °C by free radical polymerization to give a high‐molecular‐weight polymer ( of 6.2 × 10⁴) as determined by static light scattering. High‐resolution NMR spectroscopy is used to gain microstructure information. Information based on tetrad probabilities is utilized to deduce an almost atactic configuration. In addition, ¹³C NMR spectroscopy gives evidence for the presence of head‐to‐head and tail‐to‐tail links. Refined analysis of the ¹H NMR spectra allows for the quantitative determination of the fraction of these links (23.5% of all links). Experimental evidence suggests that the polymerization proceeds via cyclopolymerization of the vinylphosphonic acid anhydride as an intermediate. Titration curves indicate that high‐molecular‐weight poly(vinylphosphonic acid) PVPA behaves as a monoprotic acid.

Radical polymerization of vinylphosphonic acid proceeds by cyclopolymerization of its anhydride.     

One‐Component Bimolecular Photoinitiating Systems, 2

The compounds 2‐thioxanthone‐thioacetic acid and 2‐(carboxymethoxy)thioxanthone, bimolecular photoinitiators for free radical polymerization, are synthesized and characterized. Their capability to act as initiators for the polymerization of methyl methacrylate was examined. The postulated mechanism is based on the intermolecular electron‐transfer reaction of the excited photoinitiator with the sulfur or oxygen atom of the ground state of the respective photoinitiator followed by decarboxylation. The resulting alkyl radicals initiate the polymerization.

Structures of the photoinitiators.