While network‐like assemblies are formed by amphiphilic polyphosphazenes with poly(N‐isopropylacrylamide) and ethyl tryptophan as side groups in aqueous solution, a significant morphology transformation is observed when small molecules that exhibit hydrogen‐bonding interactions with amphiphilic copolymers are introduced during the preparation of polymeric assemblies through a dialysis procedure. Depending on copolymer composition and the content of small molecules introduced, aggregates ranging from general vesicles, high‐genus vesicles, to well‐defined nanospheres can be prepared successfully as clearly evidenced by TEM observation, which suggests this procedure should be a novel approach to prepare composite vesicles.
Two novel monovinyl β‐cyclodextrin (β‐CD) monomers are synthesized. Their chemical compositions are characterized by means of element analysis, NMR and FT‐IR spectroscopy. The results show that the synthesis techniques used are convenient and efficient. Using N‐isopropylacrylamide as a comonomer, two novel linear copolymers can also be synthesized.
A new kind of chiral‐dendronized binaphthyl‐containing polyfluorene derivatives has been synthesized through “click chemistry” efficiently. The resulting copolymers exhibited desirable properties, such as excellent solubility, good thermal stability, and considerably high molecular weights. The photophysical properties of the copolymers were investigated in details, and the results indicated that the combination of chiral binaphthyl unit and bulky dendron could effectively suppress intermolecular packing and aggregation. In addition, the investigation of circular dichroism behavior of these chiral‐dendronized copolymers showed a strong Cotton effect at long wavelength (373–379 nm), indicating that the chirality of the binaphthyl units was transferred to the whole polyfluorene backbone.
A new versatile synthesis strategy for macromonomers has been developed that uses the living ring‐opening metathesis polymerization (ROMP) with commercial Grubbs first generation ruthenium initiators. Homopolymers as well as diblock copolymers were end‐functionalized with norbornene derivatives to serve as macromonomers. The graft copolymerization of the macromonomers was also carried out employing ROMP. Well‐defined and highly functional graft copolymers are accessible by this new synthetic route.
α‐Methoxy‐ω‐alkyne poly(ethylene glycol) (PEG) was tagged with pendent N‐hydroxy‐succinimidyl activated esters by photografting of a molecular clip. This easily synthesized heterofunctional PEG was found to be a versatile building block for (i) conjugation with an amino derivative and (ii) grafting to azido functional aliphatic polyesters backbone by Huisgen's 1,3‐dipolar cycloaddition. This original combination of “clip” and “click” reactions provides a versatile and straightforward pathway for the synthesis of functional amphiphilic and degradable copolymers valuable for biomedical applications such as in drug‐delivery.
The polydomain–monodomain (PM) transformation takes place when a polydomain of a smectic‐C main‐chain liquid‐crystalline elastomer (SmC MCLCE) is uniaxially stretched. We present results based on a combination of mechanical and X‐ray experiments which show how the domains initially rearrange to finally form a perfect conical layer distribution (monodomain) when the sample is fully stretched. The rearrangement and orientational process of the domains is quantified and compared to the parallel and perpendicular uniaxial stress–strain deformations of a monodomain sample. The stress–strain behaviour of the polydomain lays between the uniaxial deformations, parallel and perpendicular to the director, of the monodomain sample.
It is the general consensus that in Gilch polymerizations the 1,4‐bis(chloromethylene)benzene starting material first changes into p‐quinodimethane intermediates which then act as the real monomers. However, direct observation of these intermediates has not been possible so far. This is because usually the p‐quinodimethane auto‐initiates its rapid radical polymerization instantaneously, keeping its concentration extremely low throughout the whole process. Here it is shown that, when the reaction is carried out at very low temperatures, the formation of p‐quinodimethane still proceeds but chain growth is suppressed. Hence, the concentration of the active monomer reaches a level sufficient for NMR analysis.
Summary: The synthesis of magnetic magnetite nanoparticles coated with amphiphilic block copolymers of poly(ethyl methacrylate)‐block‐poly(2‐hydroxyethyl methacrylate) for use as new potential carriers for hydrophobic drug delivery is reported. The results show that a new core‐shell‐corona structural material is obtained with a very narrow molecular weight distribution of the hydrophobic segment (PDI = 1.10). UV‐Vis results show that 37% of progesterone is released from the nanoparticles after 22 h, much slower than free release (99% after 14 h), which demonstrates that the presence of the hydrophobic segment can effectively control the release of hydrophobic drugs.
Synthesis of an amphiphilic block polymer poly(ethyl methacrylate)‐block‐poly(2‐hydroxyethyl methacrylate) on magnetite nanoparticles and their use as potential drug carriers 相似文献
In this Communication, the copolymerization of ethylene with a sterically hindered α‐olefin comonomer, γ‐trisubstituted 3,3‐dimethyl‐1‐butene (DMB), using a chain‐walking Pd‐diimine catalyst, [(ArNC(Me) (Me)CNAr)Pd(CH3)(NCMe)]SbF6 (Ar2,6‐(iPr)2C6H3) ( 1 ) is reported. In spite of its high steric bulkiness in the close proximity of the double bond, appreciable DMB incorporations (up to 3 mol‐%) are successfully achieved in the copolymers. The chain microstructure of the copolymers is elucidated, and the effect of DMB incorporation on polymer topology and thermal properties are examined. This work thus demonstrates the high capability of the Pd‐diimine catalyst in incorporating sterically encumbered α‐olefins.
A series of novel temperature and pH responsive block copolymers composed of poly(N‐isopropylacrylamide) (PNIPAM) and poly(L ‐lysine) (PLL) were synthesized. The effect of pH and the length of PLL on the lower critical solution temperature (LCST) of PNIPAM, and the self‐assembly of these PLL‐based copolymers induced by temperature and pH changes were investigated by the cloud point method, dynamic light scattering (DLS) and environmental scanning electron microscopy (ESEM). These PNIPAM‐b‐PLL copolymers can self‐assemble into micelle‐like aggregates with PNIPAM as the hydrophobic block at acidic pH and high temperatures; and at alkaline pH and low temperatures, they can self‐assemble into particles with PLL as the hydrophobic block. The copolymers may have potential applications in biotechnological and biomedical areas as drug release carriers.
Commercially available 1,2‐PB was transformed into a well‐defined reactive intermediate by quantitative bromination. The brominated polymer was used as a polyfunctional macroinitiator for the cationic ring‐opening polymerization of 2‐ethyl‐2‐oxazoline to yield a water‐soluble brush polymer. Nucleophilic substitution of bromide by 1‐methyl imidazole resulted in the formation of polyelectrolyte copolymers consisting of mixed units of imidazolium, bromo, and double bond. These copolymers, which were soluble in water without forming aggregates, were used as stabilizers in the heterophase polymerization of styrene and were also studied for their ionic conducting properties.
A series of random copolymers and block copolymers containing water‐soluble 4AM and fluorescent VAK are synthesized by NMP. The homopolymerizations of 4AM and VAK and 4AM/VAK random copolymerization are performed in 50 wt% DMF using 10 mol% SG1, resulting in a linear increase in versus conversion, and final polymers with narrow molecular weight distributions ( < 1.4). Reactivity ratios rVAK = 0.64 ± 0.52 and r4AM = 0.86 ± 0.66 are obtained for the 4AM/VAK random copolymerization. In addition, a poly(4AM) macroinitiator is used to initiate a surfactant‐free suspension polymerization of VAK. After 2.5 h, the resulting amphiphilic block copolymer has = 12.6 kg · mol?1, = 1.48, molar composition FVAK = 0.38 with latex particle sizes between 270 and 475 nm.
Summary: A chitin‐xylan hybrid polysaccharide having β(1 → 4)‐linked alternating structure of N‐acetyl‐D ‐glucosamine and D ‐xylose was synthesized via chitinase‐catalyzed polymerization. An oxazoline derivative of D ‐xylosyl‐β(1 → 4)‐N‐acetyl‐D ‐glucosamine ( 1 ) was effectively polymerized by the catalysis of chitinase from Bacillus sp., giving rise to a water‐soluble chitin‐xylan hybrid polysaccharide ( 2 ) in good yields. Molecular weights ( ) of 2 reached 1 500, which corresponds to 8–10 saccharide units.
A chitin‐xylan hybrid polysaccharide ( 2 ) synthesized via chitinase‐catalyzed polymerization. 相似文献
A novel pH‐responsive polymer vesicle obtained by the aqueous self‐assembly of carboxy‐terminated hyperbranched polyesters is reported. The synthesis is very simple, just a one‐step esterification of the commercially available hydroxy‐terminated hyperbranched polyester of Boltorn Hx (x = 20, 30, 40) with succinic anhydride. The vesicle size can be controlled from 200 nm to 10 µm by simply adjusting the solution pH as well as the degrees of branching (or generation).
Two well‐defined diblock copolymers with quadruple hydrogen‐bonding groups on one block, denoted PSUEA‐1 and PSUEA‐2 , have been synthesized, and novel snowflake‐shaped nanometer‐scale aggregates, self‐assembled by such diblock copolymers in non‐polar solvents, have been observed. The micellar dimensions were investigated by DLLS and SLLS. Their morphologies were studied by TEM. Since the degrees of polymerization of the Upy‐containing blocks of PSUEA‐1 and PSUEA‐2 are quite similar and the polystyrene block of the PSUEA‐1 is longer than that of the PSUEA‐2 , a subtle but identifiable difference between the sizes and structures of the PSUEA‐1 and PSUEA‐2 aggregates was noticed and characterized.
Linear and crosslinked betaine‐type polyampholytes based on ethyl 3‐aminocrotonate and unsaturated carboxylic acids have been synthesized by very fast polymerization in bulk and solution. Bulk polymerization occurred exothermically even at room temperature and without adding an initiator. The polyampholytes showed stimuli‐responsive properties with respect to pH, ionic strength, water/organic solvent mixtures, and metal ion complexation.
Temperature profile of the polymerization reaction for an equimolar mixture of CRO and AA with time in the absence of initiator. 相似文献
Summary: The synthesis, morphology, and photophysical properties of PF‐b‐PAA with different coil lengths in dilute solutions of dichloromethane/methanol are reported. A tape‐like lamellar morphology is observed at a short coil length of PF‐b‐PAA. As the coil length increases, a large compound micelle, sphere, or vesicle is observed with different methanol contents because of the enhancement of the PAA swelling with methanol and the interfacial tension between the PF core and the PAA corona. Upon further increase of the coil length, an inverted morphology of a sphere or rod with a PF corona and PAA core is first observed but the core/corona is then reversed at a high methanol content as a result of the enhanced solubility of PAA. The morphological transformation leads to a significant variation in optical absorption or fluorescence characteristics because of the possible H‐aggregate formation.
Some of the various morphologies observed upon varying the coil length and the selective solvent content. 相似文献
π‐Conjugated microporous networks have been prepared from the tetraarylated diketopyrrolo[3,4‐c]pyrrole unit as a tetrafunctional building block. The reactions are carried out using microwave‐assisted Yamamoto or Sonogashira cross‐coupling. Red insoluble powders are obtained, showing intense fluorescence. The polymer networks exhibit a high gas storage capability, with BET surface areas up to about 500 m2 · g−1.
Based on their rigid‐rod structure all‐conjugated, rod‐rod block copolymers show a preferred tendency to self‐assemble into low‐curvature vesicular or lamellar nanostructures independent from their specific chemical structure and composition. This unique and attractive behaviour is clearly illustrated in a few examples of such all‐conjugated block copolymers. The resulting nanostructured heteromaterials may find applications in electronic devices or artificial membranes.
