Natural Preparations Based on Orange,Bergamot and Clove Essential Oils and Their Chemical Compounds as Antimicrobial Agents

Since ancient times complementary therapies have been based on the use of medicinal plants, natural preparations and essential oils in the treatment of various diseases. Their use in medical practice is recommended in view of their low toxicity, pharmacological properties and economic impact. This paper aims to test the antimicrobial effect of natural preparation based on clove, orange and bergamot essential oils on a wide range of microorganisms that cause infections in humans including: Streptococcus pyogenes, Staphylococcus aureus, Shigella flexneri, Candida parapsilosis, Candida albicans, Pseudomonas aeruginosa, Escherichia coli, Salmonella typhimurium and Haemophilus influenza. Three natural preparations such as one-component emulsions: clove (ECEO), bergamote (EBEO), and orange (EOEO), three binary: E(BEO/CEO), E(BEO/OEO), E(CEO/OEO) and a tertiary emulsion E(OEO/BEO/CEO) were obtained, characterized and tested for antimicrobial effects. Also, the synergistic/antagonistic effects, generated by the presence of the main chemical compounds, were studied in order to recommend a preparation with optimal antimicrobial activity. The obtained results underline the fact that the monocomponent emulsion ECEO shows antimicrobial activity, while EOEO and EBEO do not inhibit the development of the analyzed strains. In binary or tertiary emulsions E(BEO/CEO), E(CEO/OEO) and E(OEO/ BEO/CEO) the antimicrobial effect of clove oil is potentiated due to the synergism exerted by the chemical compounds of essential oils.     

Multilayer emulsions stabilized by vegetable proteins and polysaccharides

There is great interest in the food, cosmetic and pharmaceutical industry in the use of proteins and polysaccharides as natural hydrocolloids to create novel emulsion systems with improved stability and functionality. For example, the electrostatic interaction between proteins and polysaccharides may be used to form oil-in-water (O/W) emulsions with multilayered interfacial membranes around oil droplets or multilayer emulsions. This type of emulsions have been developed using the layer-by-layer (LbL) technique, which consists of direct adsorption of an oppositely charged polyelectrolyte layer (e.g. polysaccharides) on a primary layer of ionic emulsifiers (e.g. proteins). The polymeric structure and electrical charge of proteins make them a special class of compounds very suitable for its utilization in the LbL technique. In recent years, the utilization of proteins as emulsifiers in food and pharmaceutical industry has been turning towards plants as a preferred alternative to animal-based sources. This article reviews the current understanding of the utilization of different vegetable proteins as emulsifier in order to stabilize O/W multilayer emulsion systems. Additionally, it highlights some potential applications of the multilayer emulsion technology in the industry, for improving the stability of emulsions to environmental stresses and for developing controlled or triggered release systems.     

Simple, reversible emulsion system switched by pH on the basis of chitosan without any hydrophobic modification

Chitosan without hydrophobic modification is not a good emulsifier itself. However, it has a pH-tunable sol-gel transition due to free amino groups along its backbone. In the present work, a simple reversible Pickering emulsion system based on the pH-tunable sol-gel transition of chitosan was developed. At pH > 6.0, as adjusted by NaOH, chitosan was insoluble in water. Chitosan nanoparticles or micrometer-sized floccular precipitates were formed in situ. These chitosan aggregates could adsorb at the interface of oil and water to stabilize the o/w emulsions, so-called Pickering emulsions. At pH < 6.0, as adjusted by HCl, chitosan was soluble in water. Demulsification happened. Four organic solvents (liquid paraffin, n-hexane, toluene, and dichloromethane) were chosen as the oil phase. Reversible emulsions were formed for all four oils. Chitosan-based Pickering emulsions could undergo five cycles of emulsification-demulsification with only a slight increase in the emulsion droplet size. They also had good long-term stability for more than 2 months. Herein, we give an example of chitosan without any hydrophobic modification to act as an effective emulsifier for various oil-water systems. From the results, we have determined that natural polymers with a stimulus-responsive sol-gel transition should be a good particulate emulsifier. The method for in situ formation of pH-responsive Pickering emulsions based on chitosan will open up a new route to the preparation of a wide range of reversible emulsions.     

Plasticizing effects of epoxidized sun flower oil on biodegradable polylactide films: A comparative study

Polylactide (PLA) is one of the most promising materials among the renewable source-based biodegradable plastics. However, high inherent stiffness and brittleness of the pure PLA is often insufficient for wide range of engineering applications. One of the best ways to improve the processability, toughness and flexibility of PLA is to plasticize with epoxidized plant oils. In this work, epoxidized sun flower oil (ESFO) was incorporated into PLA matrix. The thermal, mechanical, biodegradation, optical transmission properties and fracture morphology of ESFO plasticized PLA were investigated to make a comparison with that of PLA plasticized by commercial epoxidized soya bean oil (ESO). Results show that a remarkable improvement of elongation at break was observed in the case of ESFO incorporated PLA. Although a slightly decrease the T _g of PLA was resulted from the plasticizing effects of ESFO, the thermal stability of the plasticized PLA was improved. On the other hand, the ESFO plasticized PLA showed a higher level of UV adsorption but a lower level of biodegradation ratio. After all, ESFO exhibited similar effects on the biodegradable PLA films to ESO, which is anticipated to be a good candidate for plasticizing biodegradable polymer materials.     

In Vitro Assessment of the Cytotoxic and Antiproliferative Profile of Natural Preparations Containing Bergamot,Orange and Clove Essential Oils

Medicinal plants and essential oils (EOs), in particular, were intensively studied in recent years as viable alternatives for antiproliferative chemical synthetic agents. In the same lines, the present study focuses on investigating the effects of natural preparations (emulsions) based on EOs obtained from Citrus bergamia Risso (bergamot-BEO), Citrus sinensis Osbeck (orange-OEO), and Syzygium aromaticum Merill et L. M. Perry (clove-CEO) on different healthy (human immortalized keratinocytes—HaCaT and primary human gingival fibroblasts—HGF) and human tumor cell lines (human melanoma—A375 and oral squamous carcinoma—SCC-4) in terms of the cells’ viability and cellular morphology. The obtained results indicate that the CEO emulsion (ECEO) induced a dose-dependent cytotoxic in both healthy (HaCaT and HGF) and tumor (A375 and SCC-4) cells. OEO emulsion (EOEO) increased cell viability percentage both for HaCaT and A375 cells and had an antiproliferative effect at the highest concentration in HGF and SCC-4 cells. BEO emulsion (EBEO) decreased the viability percentage of SCC-4 tumor cells. By associating OEO with CEO as a binary mixture in an emulsified formulation, the inhibition of tumor cell viability increases. The E(BEO/OEO) binary emulsion induced an antiproliferative effect on oral health and tumor cells, with a minimal effect on skin cells. The non-invasive tests performed to verify the safety of the test compound’s emulsions at skin level indicated that these compounds do not significantly modify the physiological skin parameters and can be considered safe for human skin.     

High‐Internal‐Phase Pickering Emulsions Stabilized Solely by Peanut‐Protein‐Isolate Microgel Particles with Multiple Potential Applications

High‐internal‐phase Pickering emulsions have various applications in materials science. However, the biocompatibility and biodegradability of inorganic or synthetic stabilizers limit their applications. Herein, we describe high‐internal‐phase Pickering emulsions with 87 % edible oil or 88 % n‐hexane in water stabilized by peanut‐protein‐isolate microgel particles. These dispersed phase fractions are the highest in all known food‐grade Pickering emulsions. The protein‐based microgel particles are in different aggregate states depending on the pH value. The emulsions can be utilized for multiple potential applications simply by changing the internal‐phase composition. A substitute for partially hydrogenated vegetable oils is obtained when the internal phase is an edible oil. If the internal phase is n‐hexane, the emulsion can be used as a template to produce porous materials, which are advantageous for tissue engineering.     

Microencapsulation of Flaxseed Oil by Lentil Protein Isolate-κ-Carrageenan and -ι-Carrageenan Based Wall Materials through Spray and Freeze Drying

Lentil protein isolate (LPI)-κ-carrageenan (κ-C) and -ι-carrageenan (ι-C) based microcapsules were prepared through spray-drying and freeze-drying to encapsulate flaxseed oil in order to reach final oil levels of 20% and 30%. Characteristics of the corresponding emulsions and their dried microcapsules were determined. For emulsion properties, all LPI-κ-C and LPI-ι-C emulsions remained 100% stable after 48 h, while the LPI emulsions destabilized quickly (p < 0.05) after homogenization mainly due to low emulsion viscosity. For spray-dried microcapsules, the highest yield was attributed to LPI-ι-C with 20% oil, followed by LPI-κ-C 20% and LPI-ι-C 30% (p < 0.05). Flaxseed oil was oxidized more significantly among the spray-dried capsules compared to untreated oil (p < 0.05) due to the effect of heat. Flaxseed oil was more stable in all the freeze-dried capsules and showed significantly lower oil oxidation than the untreated oil after 8 weeks of storage (p < 0.05). As for in vitro oil release profile, a higher amount of oil was released for LPI-κ-C powders under simulated gastric fluid (SGF), while more oil was released for LPI-ι-C powders under simulated gastric fluid and simulated intestinal fluid (SGF + SIF) regardless of drying method and oil content. This study enhanced the emulsion stability by applying carrageenan to LPI and showed the potential to make plant-based microcapsules to deliver omega-3 oils.     

Effect of Inorganic Solids,Wax to Asphaltene Ratio,and Water Cut on the Stability of Water-in-Crude Oil Emulsions

The formation of stable water-in-crude oil emulsions during petroleum production and refinery may create sever and costly separation problems. It is very important to understand the mechanism and factors contributing to the formation and stabilization of such emulsions for both great economic and environmental development. This article investigates some of the factors controlling the stability of water-in-crude oil emulsions formed in Burgan oil field in Kuwait. Water-in-crude oil emulsion samples collected from Burgan oil filed have been used to separate asphaltenes, resins, waxes, and crude oil fractions. These fractions were used to prepare emulsion samples to study the effect of solid particles (Fe₃O₄) on the stability of emulsions samples. Results indicate that high solid content lead to higher degree of emulsion stability. Stability of emulsion samples under various waxes to asphaltenes (W/A) ratios have also been tested. These tests showed that at low W/A content, the emulsions were very stable. While at a wax to asphaltene ratio above 1 to 1, the addition of wax reduced emulsion stability. Stability of emulsion samples with varying amount of water cut has also been investigated. Results indicated that stability and hence viscosity of emulsion increases as a function of increasing the water cut until it reaches the inversion point where a sharp decline in viscosity takes place. This inversion point was found to be approximately at 50% water cut for the crude oils considered in this study.     

Synthesis of star polymeric ionic liquids and use as the stabilizers for high internal phase emulsions

A series of well-defined core cross-linked star (CCS) polymeric ionic liquids (PILs) were synthesized via a three-step approach. First, the styrenic imidazole-based CCS polymer (S-PVBnIm) was prepared by the RAFT-mediated heterogeneous polymerization in a water/ethanol solution, followed by the quaternization of S-PVBnIm with bromoalkanes and anion exchange. The CCS polymers were characterized by gel permeation chromatography (GPC), nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC). The obtained CCS polymers were used as the effective emulsifiers for oil-in-water high internal phase emulsions (HIPEs). Multiple oils with different polarity including n-dodecane, undecanol, toluene and octanol were emulsified using 0.5 wt% S-PVBnIm aqueous solution under the acidic condition to form HIPEs with long-term stabilities. The excellent emulsification properties of CCS PILs were demonstrated by HIPE formation for a variety of oils. The properties of HIPEs in terms of emulsion type and oil droplet size were characterized by the confocal laser scanning microscopy (CLSM). The intriguing capability of CCS PILs to stabilize HIPEs of various oils holds great potentials for the practical applications.     

Influence of droplet characteristics on the formation of oil-in-water emulsions stabilized by surfactant-chitosan layers

The objective of this study was to establish the optimum conditions for preparing stable oil-in-water emulsions containing droplets surrounded by surfactant-chitosan layers. A primary emulsion containing small droplets (d32 approximately = 0.3 microm) was prepared by homogenizing 20 wt% corn oil with 80 wt% emulsifier solution (20 mM SDS, 100 mM acetate buffer, pH 3) using a high-pressure valve homogenizer. The primary emulsion was diluted with chitosan solutions to produce secondary emulsions with a range of oil and chitosan concentrations (0.5-10 wt% corn oil, 0-1 wt% chitosan, pH 3). The secondary emulsions were sonicated to help disrupt any droplet aggregates formed during the mixing process. The electrical charge, particle size, and amount of free chitosan in the emulsions were then measured. The droplet charge changed from negative to positive as the amount of chitosan in the emulsions was increased, reaching a relatively constant value (approximately +50 mV) above a critical chitosan concentration (C(Sat)), which indicated that saturation of the droplet surfaces with chitosan occurred. Extremely large droplet aggregates were formed at chitosan concentrations below C(Sat), but stable emulsions could be formed above C(Sat) provided the droplet concentration was not high enough for depletion flocculation to occur. Interestingly, we found that stable multilayer emulsions could also be formed by mixing chitosan with an emulsion stabilized by a nonionic surfactant (Tween 20) due to the fact the initial droplets had some negative charge. The information obtained from this study is useful for preparing emulsions stabilized by multilayer interfacial layers.     

FLOW PROPERTIES OF WEATHERED CRUDE OILS AND THEIR EMULSIONS

The present paper proposes the emulsification of weathered crude oils in water as a competitive and cost effective method for reducing their viscosities. Weathered crude oil samples were collected from major Kuwaiti oil lakes. Emulsion preparation involved using, either a nonionic surfactant or alkali, as well as both alkali and fatty acid. The obtained emulsions were characterized by measuring the droplet size distribution of the dispersed phase using optical microscopy. Emulsion stability was also examined in terms of the system breakdown. The rheological properties were measured using a concentric cylinder rotary rheometer. The emulsion rheological behavior has been studied as a function of composition, temperature, and shear rate. A constitutive model was developed to characterize the pseudoplastic behavior of the crude oil and the emulsion systems. The model fitted well the experimental results with a correlation coefficient higher than 95%. Associated with the pseudoplastic behavior, viscoelastic behavior has been observed with emulsions and some oils at high shear rates.

The results of this investigation indicated that the examined weathered crude oils can be transported through pipelines as emulsions of up to 80 vol.% oil concentrations. The proposed method of treatment with NaOH and oleic acid offers several advantages over the surfactant treatment. It exhibited comparable rheological behavior at lower cost and less mixing energy. It also provided higher emulsion stability, which favors oil transportation for longer distances.     

Microcapsule synthesis via RAFT photopolymerization in vegetable Oil as a green solvent

Polymeric capsules with an aqueous core have great potential for a wide range of applications, for example food/biomedical applications. However, synthesis of such capsules often involves the use of toxic organic solvents. Herein, an organic solvent‐free approach is developed for the synthesis of polymeric microcapsules with an aqueous core. The method is based on RAFT polymerization of divinyl monomer around the periphery of inverse emulsion water droplets acting as templates, with an amphiphilic macroRAFT species fulfilling the dual roles of RAFT agent and colloidal stabilizer. Vegetable oils, which are non‐toxic and renewable, are used as the continuous phase of these inverse emulsions, which are prepared using membrane emulsification to control the emulsion droplet size and size distribution. Relatively monodisperse emulsions with tunable droplet size in the range of approximately 10–30 µm are prepared, followed by the RAFT polymerization step to generate polymeric microcapsules having similar size as the initial droplets. This approach will be beneficial for various applications where toxic solvents need be minimized or removed completely to avoid adverse effects. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 831–839     

STABILITY OF HATER IN OIL EMULSIONS USING HIGH MOLECULAR WEIGHT EMULSIFIERS

Excellent stability of water-in-oil emulsions could be obtained by partial crosslinking of the fatty chain in several polyglycerol fatty esters. Such products were capable of emulsifying and stabilizing up to 50 wt% water in vegetable oils at a level of 3-5% emulsifier per total emulsion weight. The corresponding non-crosslinked products require at least 20-25% emulsifier to give the sane level of stability, with much higher viscosity.

Degree of polymerization, molecular weight distribution, viscosity, dielectric constant and refractive index of the emulsifier were correlated to the emulsion stability. The most remarkable result is a clear correlation between the molecular weight of the emulsifier and emulsion stability; best emulsions were prepared with polymeric emulsifier with MW of Ca. 40000.     

Nanoparticle-based assay for the detection of virgin argan oil adulteration and its rapid quality evaluation

A new method, based on the formation of gold nanoparticles (AuNPs) and spectrophotometric analysis, is proposed to determine total phenolic acids in virgin argan oil samples. These compounds have reducibility due to the presence of the phenol group in their molecular structure, and a redox reaction occurs in the presence of HAuCl₄. The formation of AuNPs as a result of the redox reaction leading to colour changes can be visually observed, resulting in strong light signals that show absorption at 555 nm. As ferulic acid represents more than 95% of the total phenolic acid content of virgin argan oil, this compound was used as an adulteration marker to carry out the screening of samples for the evaluation of the authenticity of virgin argan oils. The analytical features of this screening method also allowed a low precision quantization of the quality of the product. Then, a reference HPLC-DAD/FD method was used to confirm the potential adulterated samples, as well as to provide a detailed quantitative analysis of the most representative phenolic compounds in the samples. The overall screening-confirmation strategy was validated by analysing pure virgin argan oil samples and argan oil samples adulterated with other commercial vegetable oils, demonstrating the reliability of the results. This approach is characterised by its simplicity, low cost, rapid information and responded to practical laboratories needs.     

Synthesis and Characterization of Chitosan-grafl-Poly（lactic acid） Copolymer

Chitosan-graft-poly(lactic acid)(CS-g-PLA) copolymer was synthesized through emulsion self-assembly in a water-in-oil(W/O) microemulsion. The water phase was composed of CS aqueous solution, while the oil phase was made up of PLA in chloroform. The W/O microemulsion was fabricated in the presence of surfactant span-80 and the self-assembly was performed between PLA and CS under the effect of N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide hydrochloride(EDC·HCl). FTIR and1H-NMR analysis indicated PLA was grafted onto the backbone of CS via the reaction between the carboxyl groups in PLA and the amino groups in CS.1H-NMR characterization further revealed the grafting content of PLA was 16%. The obtained CS-g-PLA could self-assemble to form micelles, their size distributed in the range of 125 375 nm with average diameter of 142 nm. The present design integrates the favorable biological properties of CS and the excellent mechanical properties of PLA, which makes CS-g-PLA copolymer a promising candidate as a carrier for targeted bioactive molecules delivery.     

Effect of molecular weight and degree of deacetylation of chitosan on the formation of oil-in-water emulsions stabilized by surfactant-chitosan membranes

The objective of this study was to establish the influence of polyelectrolyte characteristics (molecular weight and charge density) on the properties of oil-in-water emulsions containing oil droplets surrounded by surfactant-polyelectrolyte layers. A surfactant-stabilized emulsion containing small droplets (d32 approximately 0.3 microm) was prepared by homogenizing 20 wt% corn oil with 80 wt% emulsifier solution (20 mM SDS or 2.5 wt% Tween 20, 100 mM acetate buffer, pH 3) using a high-pressure valve homogenizer. This primary emulsion was then diluted with various chitosan solutions to produce secondary emulsions with a range of chitosan concentrations (3 wt% corn oil, 0-1 wt% chitosan). The influence of the molecular characteristics of chitosan on the properties of these emulsions was examined by using chitosan ingredients with different molecular weights (MW approximately 15, 145, and 200 kDa) and degree of deacetylation (DDA approximately 40, 77, and 92%). The electrical charge and particle size of the secondary emulsions were then measured. Extensive droplet aggregation occurred when the chitosan concentration was below the amount required to saturate the droplet surfaces, but stable emulsions could be formed at higher chitosan concentrations. The zeta-potential and mean diameter (d32) of the particles in the secondary emulsions was not strongly influenced by chitosan MW, however the chitosan with the lowest DDA (40%) produced droplets with smaller mean diameters and zeta-potentials than the other two DDA samples examined. Interestingly, we found that stable multilayer emulsions could be formed by mixing medium or high MW chitosan with an emulsion stabilized by a non-ionic surfactant (Tween 20) due to the fact the initial droplets had some negative charge. The information obtained from this study is useful for preparing emulsions stabilized by multilayer interfacial layers.     

Effect of Interfacially Active Fractions of Some Egyptian Crude Oils on Their Emulsion Stability

Four samples from different crude oils were used for this study: light and heavy crude oils from Iran and two crude oils from Egypt, namely, Ras Gharb and Suez mix. The asphaltenes were separated from these crude oils and then the maltene (non‐asphaltenic fraction) was fractionated into waxes, aromatics, and resins. All fractions were characterized using FTIR and UV spectroscopic analyses in addition to gel permeation chromatograph (GPC). These fractions were tested for their emulsion stability. For chemometric analysis different parameters (variables) have been used to study the effect of different fractions (objects) on the emulsion stability. Such variables included the integrated areas under the stretching absorption peaks of CH in the range of 3000–2800 cm^?1, C?O in the range of 1750–1650 cm^?1, and the aromatic C?C in the range of 1650–1550 cm^?1, as well as UV absorption value at 235 nm and average molecular weight (MW). Principal component analysis (PCA) and multiple linear regression (MLR) were conducted for examining the relationship between multiple variables and the stability of water‐in‐crude oil emulsions. The results of PCA explain the interrelationships between the observations and variables in multivariate data. The correlation coefficients between different parameters derived from PCA reveals that the UV absorption value and MW are strongly correlated with emulsion stability. It also reveals that the resins, asphaltenes, and maltene have better emulsion stability than waxes and lower molecular weight aromatics. The linear relationship between the parameters and the stability of water‐in‐crude oil emulsions using MLR was modeled according to the better statistical results. The obtained mathematical model can be used to predict the stability of water‐in‐crude oil emulsions from the chemical groups and functionalities in each crude oil fraction.     

Studies on N-methylene phosphonic chitosan

N-methylene phosphonic (NMPC) chitosan was studied by several techniques to determine their properties in aqueous solution and its capacity to emulsify edible oils. The phosphonic groups are all equivalent and their ionization constants were estimated (pK _a1=6.45 and pK _a2=11.75). The chitosan derivative in pure water starts to aggregate at 0.09% w/v, and the aggregates’ structure at 0.5% w/v. Unlike pure chitosan, NMPC chitosan is strongly surface active. Its hydrophile-lipophile balance (HLB) value was estimated in 37, very similar to that of chitosan. As a consequence, it favors the formation of oil in water (o/w) emulsions with scarce water/oil/water (w/o/w) droplets.     

Olive Oil with Ozone-Modified Properties and Its Application

Olive oil application in the cosmetic industry may be extended by its ozonation, bringing about new oil properties and increased stability. Olive oil treated with 0.04 mole O₃ or 0.10 mole O₃ per 100 g oil was subjected to chemical parameters evaluation and composition scrutinizing by gas chromatography–mass spectrometry (GC-MS) and headspace solid-phase microextraction (HS-SPME) GC-MS analysis. The biological activity of refined and ozonated oil included their antimicrobial properties by the agar diffusion method and cytotoxicity by the MTT assay towards two normal (LLC-PK1, HaCaT) and two cancerous (Caco-2, HeLa) cell lines. The oils served as the basis in cosmetic emulsions. The chosen organoleptic features, preservative efficacy in a challenge test, and persistency during six months of these formulations were assessed. However, the ozonation of the olive oil resulted in a decrease in unsaturated acids; several additional compounds were detected in the ozonated oil, which positively affect the physicochemical, sensory, and functional properties of cosmetic emulsions. Emulsions based on the ozonated olive oil retain their properties longer compared to emulsions based on the refined olive oil. Ozonated oil treated with 0.10 mole O₃/100 g oil allowed increasing the shelf life of the non-preserved formulation up to six months. A weak inhibitory effect against Candida albicans and Aspergillus brasiliensis was also demonstrated for this emulsion in the challenge test. Moreover, an interesting aroma, slightly enhanced antimicrobial activity against Escherichia coli, Staphylococcus aureus, C. albicans, A. brasiliensis, and a lack of cytotoxicity at concentrations 625 µg mL⁻¹ make the ozonated olive oil a promising raw material for the cosmetics and pharmaceutical industries.