One‐Pot Synthesis of an Alternating Copolyimide Based on Regioselective Reaction of a Non‐Symmetrical Alicyclic Dianhydride

Summary: Four constitutionally isomeric copoly(amide acid)s (coPAAs), two alternating and two random, have been successfully obtained from the same combination of one non‐symmetrical alicyclic tetracarboxylic dianhydride (1.0 molar equivalents) and two symmetric aromatic diamines (0.5 molar equivalents each) by only slightly changing the reaction procedures. When the reaction mixture is subjected to chemical imidization conditions without isolation of coPAAs, the corresponding copolyimides (coPIs) are obtained in one pot. All of the coPIs are slightly yellow amorphous powders and the solubility of them is similar to each other. The glass transition temperatures of the alternating coPIs are lower in comparison to those of the random coPIs.

Schematic of the possible arrangement of monomers in the copoly(amide acid)s/copolyimides synthesized here.     

Organometallic‐Mediated Alternating Radical Copolymerization of tert‐Butyl‐2‐Trifluoromethacrylate with Vinyl Acetate and Synthesis of Block Copolymers Thereof

Organometallic‐mediated radical polymerization (OMRP) has given access to well‐defined poly(vinyl acetate‐alt‐tert‐butyl‐2‐trifluoromethacrylate)‐b‐poly(vinyl acetate) and poly(VAc‐alt‐MAF‐TBE) copolymers composed of two electronically distinct monomers: vinyl acetate (VAc, donor, D) and tert‐butyl‐2‐trifluoromethacrylate (MAF‐TBE, acceptor, A), with low dispersity (≤1.24) and molar masses up to 57 000 g mol⁻¹. These copolymers have a precise 1:1 alternating structure over a wide range of comonomer feed compositions. The reactivity ratios are determined as r _VAc = 0.01 ± 0.01 and r _MAF‐TBE = 0 at 40 °C. Remarkably, from a feed containing >50% molar VAc content, poly(VAc‐alt‐MAF‐TBE)‐b‐PVAc block copolymers are produced via a one‐pot synthesis. Such diblock copolymers exhibit two glass transition temperatures attributed to the alternating and homopolymer sequences. The OMRP of this fluorine‐containing alternating monomer system may provide access to a wide range of new polymer materials.

     

Calculations of Monomer Conversion and Radical Concentration in Reversible Addition‐Fragmentation Chain Transfer Radical Polymerization

Simple expressions are derived for the development of monomer conversion, as well as propagating radical, adduct radical, dormant chain, and dead chain concentrations in reverse addition‐fragmentation transfer polymerization (RAFT). The relations for the profiles of propagating radical concentration and conversion versus time are derived and depend on group parameters of rate constants and chemical recipe. The analytical equations are verified against numerical solutions of the mass‐balance differential equations. This derivation involves the steady‐state hypothesis for radical and RAFT agent concentrations. The errors introduced by these assumptions are negligible when the fragmentation rate constant, k_f, is higher than 10 s⁻¹ or when the cross‐termination rate constant, k_ct, is higher than 10⁵ L · mol⁻¹ s⁻¹.

Calculated concentration profiles (points: numerical, lines: analytical) of propagating radical R, adduct radical A, dormant T, and dead D (= P + P′) chains.     

用稳定自由基聚合及光引发聚合制备嵌段共聚物

介绍了稳定自由基聚合的反应原理、引发剂设计，以及用稳定自由基聚合制备嵌段共聚物的几种方法：连续加料法、双官能团引发剂法和一步法。对于光引发聚合的原理及硫自由基的稳定性对聚合反应的影响也进行了讨论。     

Isoprene‐Assisted Radical Coupling of (Co)polymers Prepared by Cobalt‐Mediated Radical Polymerization

Tackling blocks : The isoprene‐assisted radical coupling (I‐ARC) of polymers prepared by cobalt‐mediated radical polymerization (see picture) is the first efficient radical coupling method that is not restricted to short chains. When applied to AB diblock copolymers, I‐ARC constitutes a straightforward approach to the preparation of novel symmetrical ABA triblock copolymers.

     

Radical addition‐coupling polymerization with various nitroso compounds

Four nitroso esters were prepared by oxidation of 4,4‐dimethyl dihydro‐1,3‐oxazine or 4,4‐dimethyl‐2‐oxazoline with two equiv of m‐chloroperoxybenzoic acid. All of them can be applied in radical addition‐coupling polymerization to produce periodic polymer together with introduction of ester group at side chain. Compared with 2‐methyl‐2‐nitrosopropane, 2‐nitroso‐2‐methyl‐4‐acetoxypentane and 2‐methyl‐2‐nitrosopropyl hexanoate present good stability at high temperature up to 70 °C and can result polymer with high molecular weight. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 810–815     

Synthesis of Novel μ‐Star Copolymers with Poly(N‐Octyl Benzamide) and Poly(ε‐Caprolactone) Miktoarms through Chain‐Growth Condensation Polymerization,Styrenics‐Assisted Atom Transfer Radical Coupling,and Ring‐Opening Polymerization

Star copolymers are known to phase separate on the nanoscale, providing useful self‐assembled morphologies. In this study, the authors investigate synthesis and assembly behavior of miktoarm star (μ‐star) copolymers. The authors employ a new strategy for the synthesis of unprecedented μ‐star copolymers presenting poly(N‐octyl benzamide) (PBA) and poly(ε‐caprolactone) (PCL) arms: a combination of chain‐growth condensation polymerization, styrenics‐assisted atom transfer radical coupling, and ring‐opening polymerization. Gel permeation chromatography, mass‐analyzed laser desorption/ionization mass spectrometry, and ¹H NMR spectroscopy reveal the successful synthesis of a well‐defined (PBA₁₁)₂‐(PCL₁₅)₄ μ‐star copolymer (M _n,NMR ≈ 12 620; Đ = 1.22). Preliminary examination of the PBA₂PCL₄ μ‐star copolymer reveals assembled nanofibers having a uniform diameter of ≈20 nm.

     

Development of Glassy Step‐Growth Thiol‐Vinyl Sulfone Polymer Networks

Thermomechanical properties of neat phosphine‐catalyzed thiol‐Michael networks fabricated in a controlled manner are reported, and a comparison between thiol‐acrylate and thiol‐vinyl sulfone step‐growth networks is performed. When highly reactive vinyl sulfone monomers are used as Michael acceptors, glassy polymer networks are obtained with glass transition temperatures ranging from 30 to 80 °C. Also, the effect of side‐chain functionality on the mechanical properties of thiol‐vinyl sulfone networks is investigated. It is found that the inclusion of thiourethane functionalities, aryl structures, and most importantly the elimination of interchain ester linkages in the networks significantly elevate the network's glass transition temperature as compared with neat ester‐based thiol‐Michael networks.

     

Controlled Alternating Copolymerization of (Meth)acrylates and Vinyl Ethers by Using Organoheteroatom‐Mediated Living Radical Polymerization

Alternating copolymers comprised of (meth)acrylates and vinyl ethers with controlled molecular weights and polydispersities were synthesized for the first time by living radical polymerization using organotellurium, stibine, and bismuthine chain transfer agents. Combining living alternating copolymerization and living radical or living cationic polymerization afforded hitherto unavailable block copolymers with controlled macromolecular structures.

     

基于ATRP技术的多嵌段共聚物研究进展

原子转移自由基聚合(ATRP)技术是合成结构规整性聚合物的有效途径。综述了近十年来采用ATRP技术合成多嵌段共聚物的研究进展。从引发剂、共聚单体和反应条件等方面讨论了ABA型、ABC型和ABCBA型等类型多嵌段共聚物的合成、性质与潜在应用。对原子转移自由基聚合技术在合成功能性多嵌段共聚物中的应用前景进行了展望。     

Synthesis of Dendritic-Linear Block Copolymers by Atom Transfer Radical Polymerization

Polymers and copolymers with complex, yet well-defined architectures are drawing significant attentions in the search for materials with excellent properties. Of these macromolecular structures, dendritic-linear block copolymers consisting of covalently bound linear and dendritic segments have shown interesting solution, solid-state, and interfacial properties. As a novel polymerization approach, atom transfer radical polymerization (ATRP) has been attracting increasing interest recently, sin…     

Modeling of Superacid Catalyzed Step‐Growth Polymerization of Isatin and Biphenyl or Terphenyl Monomers

A mathematical model for the kinetics and molecular weight development of superacid catalyzed step‐growth polymerization of isatin and biphenyl or terphenyl monomers is developed. By considering different reactivities among the several types of polymer molecules present in an otherwise conventional A₂ + B₂ step‐growth polymerization system, ultrahigh molecular weights are predicted by the model for superacid catalyzed polyhydroxyalkylation reactions, a result that remains unclear in the literature since it seems to be in disagreement with the classical A₂ + B₂ theory. Three polymerization systems are addressed in this study: (a) polymerization of isatin and biphenyl, (b) modified isatin and biphenyl, and (c) modified isatin and terphenyl. Overall good agreement between calculated and experimental results of polymerization rate, and evolution of number‐ and weight‐average molecular weights (M _n and M _w, respectively) is observed. However, some discrepancies for molar mass dispersity (Ð ) are observed.     

A Critical Survey of Dithiocarbamate Reversible Addition‐Fragmentation Chain Transfer (RAFT) Agents in Radical Polymerization

This article provides a critical review of the properties, synthesis, and applications of dithiocarbamates Z′Z″NC(=S)SR as mediators in reversible addition‐fragmentation chain transfer (RAFT) polymerization. These are among the most versatile RAFT agents. Through choice of substituents on nitrogen (Z′, Z″), the polymerization of most monomer types can be controlled to provide living characteristics (i.e., low dispersities, high end‐group fidelity, and access to complex architectures). These include the more activated monomers (MAMs; e.g., styrenes and acrylates) and the less activated monomers (LAMs; e.g., vinyl esters and vinylamides). Dithiocarbamates with balanced activity (e.g., 1H‐pyrazole‐1‐carbodithioates) or switchable RAFT agents [e.g., a N‐methyl‐N‐(4‐pyridinyl)dithiocarbamate] allow control MAMs and LAMs with a single RAFT agent and provide a pathway to low‐dispersity poly(MAM)‐block‐poly(LAM). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 216–227     

A Versatile Strategy to Synthesize Perfluoropolyether‐Based Thermoplastic Fluoropolymers by Alkyne‐Azide Step‐Growth Polymerization

Perfluoropolyether (PFPE)‐based thermoplastic fluoropolymers are synthesized by A₂ + B₂ step‐growth polymerization between PFPE‐diyne and fluorinated diazides. This versatile method allows synthesizing PFPE‐based materials with tunable physicochemical properties depending on the exact nature of the fluorinated segment of the diazide precursor. Semicrystalline or amorphous materials endowed with high thermostability (≈300 °C under air) and low glass transition temperature (≈−100 °C) are obtained, as confirmed by differential scanning calorimetry, thermogravimetry, and rheometry. Step‐growth polymerizations can be copper‐catalyzed but also thermally activated in some cases, thus avoiding the presence of copper residues in the final materials. This strategy opens up new opportunities to easily access PFPE‐based materials on an industrial scale. Furthermore, a plethora of developments can be envisioned (e.g., by adding a third trifunctional component to the formulations for the synthesis of PFPE‐based elastomers).

     

Fast and effective copper(0)‐mediated simultaneous chain‐ and step‐growth radical polymerization at ambient temperature

Vinyl‐conjugated monomer (methyl acrylate, MA) and allyl 2‐bromopropanoate (ABP)‐possessing unconjugated C?C and active C? Br bonds were polymerized via the Cu(0)‐mediated simultaneous chain‐ and step‐growth radical polymerization at ambient temperature using Cu(0) as catalyst, N,N,N′,N″,N″‐pentamethyldiethylenetriamine as ligand and dimethyl sulfoxide as solvent. The conversion was reached higher than 98% within 20 h. The obtained polymers showed block structure consisting of polyester and vinyl polymer moieties. The Cu(0)‐catalyzed simultaneous chain‐ and step‐growth radical polymerization mechanism was demonstrated by NMR, matrix‐assisted laser desorption ionization time‐of‐flight, and GPC analyses. Furthermore, the obtained copolymers of MA and ABP were further modified with poly(N‐isopropylamide) through radical thiol‐ene “click” chemistry from the terminal double bond. The thermoresponsive behavior of this block copolymer was investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3907–3916     

Experimental Requirements for an Efficient Control of Free‐Radical Polymerizations via the Reversible Addition‐Fragmentation Chain Transfer (RAFT) Process

Summary: Reversible addition‐fragmentation chain transfer (RAFT) polymerization is a recent and very versatile controlled radical polymerization technique that has enabled the synthesis of a wide range of macromolecules with well‐defined structures, compositions, and functionalities. The RAFT process is based on a reversible addition‐fragmentation reaction mediated by thiocarbonylthio compounds used as chain transfer agents (CTAs). A great variety of CTAs have been designed and synthesized so far with different kinds of substituents. In this review, all of the CTAs encountered in the literature from 1998 to date are reported and classified according to several criteria : i) the structure of their substituents, ii) the various monomers that they have been polymerized with, and iii) the type of polymerization that has been performed (solution, dispersed media, surface initiated, and copolymerization). Moreover, the influence of various parameters is discussed, especially the CTA structure relative to the monomer and the experimental conditions (temperature, pressure, initiation, CTA/initiator ratio, concentration), in order to optimise the kinetics and the efficiency of the molecular‐weight‐distribution control.

Schematic of the RAFT polymerization.     

Synthesis of Well-Defined Dendritic-Linear Diblock and Triblock Copolymers by Controlled Free Radical Polymerization

Recently, significant progress has been made in the field of living free radical polymerization such as nitroxide-mediated stable free radical polymerization, atom transfer radical polymerization (ATRP), reverse ATRP and reversible addition-fragmentation chain transfer1. Among them, ATRP has been successfully applied to the synthesis of well-defined comb, gradient, star and dendritic macromolecules. Recent advances have been carried toward new initiators, metals and ligands. As a new cl…     

Cyclic Multiblock Copolymers via Combination of Iterative Cu(0)‐Mediated Radical Polymerization and Cu(I)‐Catalyzed Azide‐Alkyne Cycloaddition Reaction

Cyclic multiblock polymers with high‐order blocks are synthesized via the combination of single‐electron transfer living radical polymerization (SET‐LRP) and copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). The linear α,ω‐telechelic multiblock copolymer is prepared via SET‐LRP by sequential addition of different monomers. The SET‐LRP approach allows well control of the block length and sequence as A‐B‐C‐D‐E, etc. The CuAAC is then performed to intramolecularly couple the azide and alkyne end groups of the linear copolymer and produce the corresponding cyclic copolymer. The block sequence and the cyclic topology of the resultant cyclic copolymer are confirmed by the characterization of ¹H nuclear magnetic resonance spectroscopy, gel permeation chromatography, Fourier transform infrared spectroscopy, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry.

     

Synthesis of Well‐Defined Rod‐Coil Diblock Copolymer of Aromatic Polyether and Polyacrylonitrile by Chain‐Growth Condensation Polymerization and Atom Transfer Radical Polymerization

The synthesis of diblock copolymers of aromatic polyether and polyacrylonitrile (PAN) was conducted by chain‐growth condensation polymerization (CGCP) and atom transfer radical polymerization (ATRP) from an orthogonal initiator. When CGCP for aromatic polyether was carried out from a PAN macroinitiator obtained by ATRP with an orthogonal initiator, decomposition of the PAN backbone occurred. However, when ATRP of acrylonitrile was conducted from an aromatic polyether macroinitiator obtained by CGCP followed by introduction of an ATRP initiator unit, the polymerization proceeded in a well‐controlled manner to yield aromatic polyether‐block‐polyacrylonitrile (polyether‐b‐PAN) with low polydispersity. This block copolymer self‐assembled in N,N‐dimethylformamide to form bundle‐like or spherical aggregates, depending on the length of the PAN units in the block copolymer.

     

利用反向原子转移自由基聚合反应合成聚甲基丙烯酸缩水甘油酯

以偶氮二异丁腈为引发剂,CuBr2/bpy为催化体系,甲基丙烯酸缩水甘油酯(GMA)通过反向原子转移自由基聚合反应合成了聚甲基丙烯酸缩水甘油酯(PGMA),其结构经1H NMR,IR和GPC确证。聚合反应符合活性自由基聚合特征,在聚合过程中GMA转化率和PGMA分子量随反应时间的延长而增大,分子量分布较窄。