Poly(2‐vinylpyridine)‐block ‐Poly(ϵ‐caprolactone) Single Crystals in Micellar Solution

Self‐assembly of poly(2‐vinylpyridine)‐block‐poly(ϵ‐caprolactone) (P2VP‐b‐PCL) diblock copolymer in the presence of a selective solvent is investigated by transmission electron microscopy and atomic force microscopy. Addition of water into a P2VP‐b‐PCL solution in N,N‐dimethylformamide at 20 °C produces elongated truncated lozenge shaped single crystals of uniform size and shape in large quantities. The single crystals are composed of PCL single‐crystal layer sandwiched between two P2VP layers tethered on the top and bottom basal surfaces. The formation of the single crystals is found to depend on the temperature. These findings provide a facile approach to the preparation of uniform single crystals in large quantities.

     

Novel Amphiphilic Degradable Poly(ε‐caprolactone)‐graft‐poly(4‐vinyl pyridine), Poly(ε‐caprolactone)‐graft‐poly(dimethylaminoethyl methacrylate) and Water‐Soluble Derivatives

New amphiphilic graft copolymers that have a poly(ε‐caprolactone) (PCL) biodegradable hydrophobic backbone and poly(4‐vinylpyridine) (P4VP) or poly(2‐(N,N‐dimethylamino)ethyl methacrylate) (PDMAEMA) hydrophilic side chains have been prepared by anionic polymerization of the corresponding 4VP and DMAEMA monomers using a PCL‐based macropolycarbanion as initiator. The water solubility of these amphiphilic copolymers is improved by quaternization, which leads to fully water‐soluble cationic copolymers that give micellar aggregates in deionized water with diameters ranging from 65 to 125 nm. In addition, to improve the hydrophilicity of PCL‐g‐P4VP, grafting of poly(ethylene glycol) (PEG) segments has been carried out to give a water‐soluble double grafted PCL‐g‐(P4VP;PEG) terpolymer.

     

New Stimuli Responsive Poly(1‐vinylpyrrolidin‐2‐one) Bearing Pendant Activated Disulfide Groups

Summary: A novel functionalised poly(1‐vinylpyrrolidin‐2‐one) (PVP) derivative, carrying a pre‐determined amount of 2‐(2‐pyridinyldithio)ethylamine moieties as side substituents, P(VP‐co‐VP‐SS‐Py), has been prepared from carboxylated VP copolymers, in turn obtained by copolymerising 1‐vinylpyrrolidin‐2‐one with 3,3‐di‐(ethoxycarbonyl)‐1‐vinylpyrrolidin‐2‐one in the presence of radical initiators. Using reaction solvents acting in the mean time as chain transfer agents could control its molecular weight. P(VP‐co‐VP‐SS‐Py) proved to be extremely reactive towards exchange reactions with molecules containing mercapto functions, including bioactive peptides. The exchange derivative with reduced glutathione, chosen as a model compound, was easily prepared.

     

Poly(4‐vinylpyridine) Nanocrosslinked by Polyhedral Oligomeric Silsesquioxane

Summary: Octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane (OpePOSS) was used as the crosslinking agent to prepare the nanocrosslinked poly(4‐vinylpyridine) (P4VP) with POSS content up to 55.2 wt.‐%. The formation of the crosslinked structure is ascribed to the macromolecular reaction between pyridine rings of P4VP and epoxide groups of OpePOSS. The POSS‐crosslinked P4VP displayed enhanced glass transition temperatures (T_gs) and an improved thermal stability in terms of the results of thermal analysis.

Crosslinking of poly(4‐vinylpyridine) with octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane.     

A New Poly(2,7‐Dibenzosilole) Derivative in Polymer Solar Cells

A new soluble conjugated copolymer based on 2,7‐dibenzosilole and 4,7‐dithien‐2‐yl‐2,1,3‐benzothiadiazole units has been synthesized (PBSDTBT). Bulk heterojunction solar cell devices are fabricated using this material as the donor and [6,6]‐phenyl‐C₆₁ butyric acid methyl ester (PCBM) as the acceptor. The power conversion efficiency is 1.6% under AM1.5 illumination. This material also shows a good V_OC (0.97 V). The results are quite promising considering the relatively large bandgap (1.9 eV) of this polymer.

     

Aggregation Behavior of Homo‐PS/PS‐b‐P2VP Blends at the Air/Water Interface

The mixed Langmuir monolayers and Langmuir–Blodgett (LB) films of homo‐polystyrene (h‐PS) and the diblock copolymer polystyrene‐block‐poly(2‐vinylpyridine) (PS‐b‐P2VP) have been characterized by the Langmuir monolayer technique and tapping mode atomic force microscopy (AFM), respectively. When the content of h‐PS is below 80 wt.‐%, the mixed LB films of h‐PS/PS‐b‐P2VP mainly exhibit isolated circular nanoaggregates. With a further increase of the h‐PS content (80–95%), however, highly uniform and stable necklace‐network structures are observed in the mixed LB films.

     

Multiple Morphologies and Their Transformation of a Polystyrene‐block‐poly(4‐vinylpyridine) Block Copolymer

Summary: We report the multiple morphologies and their transformation of polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) in low‐alkanol solvents. In order to improve the solubility of polystyrene block in alcohol solvents, the solution of block copolymer sample was treated at a higher temperature, and then the influence of rate of decreasing temperature on multiple morphologies (including spheres, rods, vesicles, porous vesicles, large compound vesicles, and large compound micelles) was observed. The transformation of spheres to rods, to tyre‐shaped large compound micelles, and to sphere‐shaped large compound micelles was also realized. The formation mechanisms of the multiple morphologies and their transformation are discussed briefly.

Aggregates of PS‐P4VP formed in butanol by quenching from 110 °C to room temperature.     

Selective and Sequential Re‐Assembly of Patterned Block Copolymer Thin Film for Fabricating Polymeric,Inorganic, and Their Composite Nanostructured Arrays

We report that the nanostructures of poly(styrene‐block‐4‐vinylpyridine) block copolymer (PS‐b‐P4VP) thin film on a wafer substrate can be re‐assembled by sequential vapor treatment using selected solvents. Metal or other inorganic nanoparticles that were randomly pre‐loaded inside or on the surface of PS‐b‐P4VP thin film could be pulled to the rim of PS and P4VP along with the movements of PS and P4VP blocks during the treatment. As a result, the patterned polymeric or inorganic/polymer composite nanoisland and nanoring arrays were fabricated.

     

Effects of Thermal Annealing Upon the Nanomorphology of Poly(3‐hexylselenophene)‐PCBM Blends

Grazing incidence X‐ray diffraction (GI‐XRD) is used to characterize the crystallographic dynamics of low molecular weight (LMW) and high molecular weight (HMW) poly(3‐hexylselenophene) (P3HS) films and blend films of P3HS with [6‐6‐]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) as a function of ‘step‐by‐step’ thermal annealing, from room temperature to 250 °C. The temperature‐dependent GIXRD data show how the melting point of P3HS crystallites is decreased by the presence of PCBM. P3HS crystallite domain sizes dramatically increase upon annealing to the P3HS melting temperature. The formation of well‐oriented HMW P3HS crystallites with the (100) plane parallel to the substrate (edge‐on orientation), when cooled from melt, are observed. We compare the behaviour of P3HS pure and blend films with that of poly(3‐hexyl)thiophene (P3HT) pure and PCBM blended films and suggest that the similar temperature dependent behaviour we observe may be a common to polythiophene and related polymers and their blends.

     

Vapor‐Based Synthesis of Poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] and Its Use for Biomimetic Surface Modifications

Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.

     

Synthesis of Well‐defined Amphiphilic Block Copolymers by Organotellurium‐Mediated Living Radical Polymerization (TERP)

Low‐molecular weight amphiphilic diblock copolymers, polystyrene‐block‐poly (2‐vinylpyridine) (PS‐b‐P2VP), and (P2VP‐b‐PS) with different block ratios were synthesized for the first time via organotellurium‐mediated living radical polymerization (TERP). For both the homo‐ and block copolymerizations, good agreement between the theoretical, and experimental molecular weights was found with nearly 100% yield in every case. The molecular weight distribution for all the samples ranged between 1.10 and 1.24, which is well below the theoretical lower limit of 1.50 for a conventional free radical polymerization. Furthermore, a very simple approach to producing highly dense arrays of titania nanoparticles (TiO₂) is presented using a site‐selective reaction of titanium tetraisopropoxide within the P2VP domains of micellar film of P2VP‐b‐PS in toluene through the sol–gel method.

     

Alternating Poly(Pt‐salphen)‐(p‐phenyleneethynylene) as Phosphorescent Conjugated Linear‐Rod and Coilable Sensory Materials

Phosphorescent conjugated polymers consisting of alternating p‐phenylene‐ethynylene and ‘para‐’ or ‘meta‐type’ Pt(II)‐salphen luminophore units have been synthesized. Side‐arms bearing different substituents (n‐alkoxy and acetylated‐sugar) have afforded contrasting emission properties that are attributed to the polymer conformation, extent of π‐stacking interactions and differences in chemical structure. Intriguing selectivity in luminescent sensing of metal ions has been observed.

     

Raspberry‐Like Aggregates Containing Secondary Nanospheres of Polystyrene‐block‐poly(4‐vinylpyridine) Micelles

Summary: Raspberry‐like aggregates containing secondary nanospheres were studied. The formation of raspberry‐like aggregates was due to complexation between core‐shell microspheres and core‐corona micelles. The core‐shell microspheres were synthesized with soap‐free polymerization of styrene and methyl acrylic acid, which included carboxyl groups in the periphery. The micelles were self‐assembled by polystyrene‐block‐poly(4‐vinylpyridine), which contained pyridine groups in the corona. The driven force to form raspberry‐like aggregates was due to the affinity between the carboxyl and pyridine groups. The morphology of the raspberry‐like aggregates could be tuned by changing the ratio of the microspheres to micelles. IR measurements suggested that the raspberry‐like aggregates were like zwitterions.

TEM image of the raspberry‐like aggregates formed at a molar ratio of MAA to 4VP at 1:4.     

Investigation of Cationic Polymerization of β‐Pinene Using Calorimetric Measurements

An experimental investigation of the kinetics of cationic polymerization of β‐pinene was performed using two different initiator systems under two different operating conditions (shot additions of initiator, and continuous feeding of monomer). The experiments were done using calorimetric measurements under isoperibolic conditions. The heat of polymerization of β‐pinene was found to be ?30.6 kcal · mol^?1. A simple kinetic model was tentatively proposed, and the model fit reasonably well to the different experimental runs. Different values of the fitting parameters were obtained for runs carried out under different conditions, which can probably be ascribed to the presence of adventitious impurities in the commercial‐grade monomer used.

     

Highly Asymmetric Phase Diagram of a Poly(1,2‐octylene oxide)–Poly(ethylene oxide) Diblock Copolymer System Comprising a Brush‐Like Poly(1,2‐octylene oxide) Block

The phase diagram of a series of poly(1,2‐octylene oxide)–poly(ethylene oxide) (POO–PEO) diblock copolymers is determined by small‐angle X‐ray scattering. The Flory–Huggins interaction parameter was measured by small‐angle neutron scattering. The phase diagram is highly asymmetric due to large conformational asymmetry that results from the hexyl side chains in the POO block. Non‐lamellar phases (hexagonal and gyroid) are observed near f_PEO = 0.5, and the lamellar phase is observed for f_PEO ≥ 0.5.

     

Synthesis and Characterization of a Block Copolymer Containing Regioregular Poly(3‐hexylthiophene) and Poly(γ‐benzyl‐L‐glutamate)

Poly(3‐hexylthiophene)‐b‐poly(γ‐benzyl‐L ‐glutamate) (P3HT‐b‐PBLG) rod–rod diblock copolymer was synthesized by a ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride using a benzylamine‐terminated regioregular P3HT macroinitiator. The opto‐electronic properties of the diblock copolymer have been investigated. The P3HT precursor and the P3HT‐b‐PBLG have similar UV–Vis spectra both in solution and solid state, indicating that the presence of PBLG block does not decrease the effective conjugation length of the semiconducting polythiophene segment. The copolymer displays solvatochromic behavior in THF/water mixtures. The morphology of the diblock copolymer depends upon the solvent used for film casting and annealing results in morphological changes for both films deposited from chloroform and trichlorobenzene.

     

New π‐Conjugated Polymers Containing 1,3,5‐Triazine Units in the Main Chain: Synthesis and Optical and Electrochemical Properties of the Polymers

Summary: Three new soluble π‐conjugated polymers containing 1,3,5‐triazine units in the main chain, Pa–Pc, were synthesized. The polymers showed optical properties in solution that were mainly dependant on the properties of the substituting R groups, on the triazine ring. Hence, Pa and Pb (R = H and  OCH₃, respectively) showed blue photoluminescent (PL) emission with high quantum yields (QY) even in polar solvents, whereas Pc (R = N,N‐dimethylamino) gave green‐blue PL emission with very low QY. The PL spectra of the polymers in solution were concentration and polarity dependent, which suggested the formation of an exciplex.

The three new soluble π‐conjugated polymers containing 1,3,5‐triazine units in the main chain synthesized here.     

On the Crystal Structure of Isotactic cis‐1,4‐Poly(1,3‐pentadiene)

Summary: A comparison between the crystal structure of isotactic cis‐1,4‐poly(1,3‐pentadiene) previously predicted by molecular mechanics calculations and that successively determined by other authors by experimental data is reported. The agreement between the two structures is very good as far as the space group, the unit cell parameters and the conformation of the polymer chain are concerned. The mode of packing of the chains proposed in the experimental crystal structure is very similar to that found as relative minimum in the previous energy calculations. The coexistence, in different amounts, of these two modes of packing is suggested by the analysis of the simulated X‐ray spectra and by the results of new energy calculations.

A mode of packing of chains of isotactic cis‐1,4‐poly(1,3‐pentadiene).     

Multi‐Morphological Complex Aggregates Formed from Amphiphilic Poly(ethylene oxide)‐block‐Polydimethylsiloxane‐block‐Poly(ethylene oxide) Triblock Copolymers

Summary: Amphiphilic triblock copolymers (PEO_x‐b‐PDMS_y‐b‐PEO_x) with different block lengths were synthesized and multi‐morphological complex crew‐cut, star‐like, and short‐chain aggregates were prepared by self‐assembly of the given copolymers. The morphologies and dimensions of the aggregates can be well controlled by variation of the preparation conditions. TEM, SEM, FFR‐TEM, and LLS studies show the resulting morphologies range from LCMs, unilamellar or multilayer vesicles, LCVs, porous spheres to nanorods.

TEM images of the vesicles formed from PEO‐b‐PDMS‐b‐PEO.     

Nanoporous Network Channels from Self‐Assembled Triblock Copolymer Supramolecules

Supramolecular complexes of a poly(tert‐butoxystyrene)‐block‐polystyrene‐block‐poly(4‐vinylpyridine) triblock copolymers and less than stoichiometric amounts of pentadecylphenol (PDP) are shown to self‐assemble into a core–shell gyroid morphology with the core channels formed by the hydrogen‐bonded P4VP(PDP)complexes. After structure formation, PDP was removed using a simple washing procedure, resulting in well‐ordered nanoporous films that were used as templates for nickel plating.