Hierarchically Structured Porous Poly(2‐oxazoline) Hydrogels

A new method for fabricating hydrogels with intricate control over hierarchical 3D porosity using microfiber porogens is presented. Melt electrospinning writing of poly(ε‐caprolactone) is used to create the sacrificial template leading to hierarchical structuring consisting of pores inside the denser poly(2‐oxazoline) hydrogel mesh. This versatile approach provides new opportunities to create well‐defined multilevel control over interconnected pores with diameters in the lower micrometer range inside hydrogels with potential applications as cell scaffolds with tunable diffusion and transport of, e.g., nutrients, growth factors or therapeutics.

     

Poly(2‐oxazoline) Hydrogels: State‐of‐the‐Art and Emerging Applications

The synthesis of poly(2‐oxazoline)s has been known since the 1960s. In the last two decades, they have risen in popularity thanks to improvements in their synthesis and the realization of their potential in the biomedical field due to their “stealth” properties, stimuli responsiveness, and tailorable properties. Even though the bulk of the research to date has been on linear forms of the polymer, they are also of interest for creating network structures due to the relatively easy introduction of reactive functional groups during synthesis that can be cross‐linked under a variety of conditions. This opinion article briefly reviews the history of poly(2‐oxazoline)s and examines the in vivo data on soluble poly(2‐oxazoline)s to date in an effort to predict how hydrogels may perform as implantable materials. This is followed by an overview of the most recent hydrogel synthesis methods and emerging applications, and is concluded with a section on the future directions predicted for these fascinating yet underutilized polymers.     

Thermoresponsive Poly(2‐oxazine)s

The monomers 2‐methyl‐2‐oxazine (MeOZI), 2‐ethyl‐2‐oxazine (EtOZI), and 2‐n‐propyl‐2‐oxazine (nPropOZI) were synthesized and polymerized via the living cationic ring‐opening polymerization (CROP) under microwave‐assisted conditions. pEtOZI and pnPropOZI were found to be thermoresponsive, exhibiting LCST behavior in water and their cloud point temperatures (T_CP) are lower than for poly(2‐oxazoline)s with similar side chains. However, comparison of poly(2‐oxazine) and poly(2‐oxazoline)s isomers reveals that poly(2‐oxazine)s are more water soluble, indicating that the side chain has a stronger impact on polymer solubility than the main chain. In conclusion, variations of both the side chains and the main chains of the poly(cyclic imino ether)s resulted in a series of distinct homopolymers with tunable T_CP.     

Microwave Accelerated Polymerization of 2‐Phenyl‐2‐oxazoline

Summary: We studied the cationic ring‐opening polymerization of 2‐phenyl‐2‐oxazoline under microwave irradiation. A comparison with thermal heating shows a great enhancement in the reaction rates while the living character of the polymerization is conserved. The polymerizations were performed at the temperature of boiling butyronitrile (123 °C). The polymerization of 2‐phenyl‐2‐oxazoline under microwave conditions, described herein for the first time, is shown to be a rapid and environmentally friendly alternative to the classical methods.

Schematic of the activation of the reactive site by microwave irradiation.     

Tuning the LCST of poly(2‐cyclopropyl‐2‐oxazoline) via gradient copolymerization with 2‐ethyl‐2‐oxazoline

Poly(2‐propyl‐oxazoline)s can be prepared by living cationic ring‐opening polymerization of 2‐oxazolines and represent an emerging class of biocompatible polymers exhibiting a lower critical solution temperature in aqueous solution close to body temperature. However, their usability is limited by the irreversibility of the transition due to isothermal crystallization in case of poly(2‐isopropyl‐2‐oxazoline) and the rather low glass transition temperatures (T_g < 45 °C) of poly(2‐n‐propyl‐2‐oxazoline)‐based polymers. The copolymerization of 2‐cyclopropyl‐2‐oxazoline and 2‐ethyl‐2‐oxazoline presented herein yields gradient copolymers whose cloud point temperatures can be accurately tuned over a broad temperature range by simple variation of the composition. Surprisingly, all copolymers reveal lower T_gs than the corresponding homopolymers ascribed to suppression of interchain interactions. However, it is noteworthy that the copolymers still have T_gs > 45 °C, enabling convenient storage in the fridge for future biomedical formulations. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3118–3122     

Poly(2‐ethyl‐2‐oxazoline) as Alternative for the Stealth Polymer Poly(ethylene glycol): Comparison of in vitro Cytotoxicity and Hemocompatibility

Limitations of PEG in drug delivery have been reported from clinical trials. PEtOx (0.4–40 kDa) as alternative is synthesized by a living, microwave‐assisted polymerization, and is directly compared to PEG of similar molar mass regarding cytotoxicity and hemocompatibility. In short‐term treatments, both types of polymers are well tolerated even at high concentrations. Moderate concentration and molar mass dependent cytotoxic effects occurred only after long‐term incubation at concentrations higher than therapeutic doses. PEtOx possesses not only an easy route of synthesis and beneficial physicochemical characteristics such as low viscosity and high stability, which are advantageous over PEG, but additionally in vitro toxicology comparable to PEG.

     

Water‐Developable Poly(2‐oxazoline)‐Based Negative Photoresists

Copoly(2‐oxazoline)‐based photoresists are prepared from pEtOx₈₀Bu⁼Ox₂₀ and pPhOx₈₀Dc⁼Ox₂₀ , respectively, a tetrathiol, and a photosensitive initiator. It is possible to prepare copoly(2‐oxazoline)s bearing unsaturated side chains in a microwave reactor on a decagram scale in reaction times of 100 min or shorter. UV irradiation of dried polymer films through a quartz mask induces the thiol‐ene reaction in the illuminated areas. Subsequent development of the polymer films in halogen‐free solvents reproduces the negative pattern of the mask with a resolution of 2 μm. The pEtOx₈₀Bu⁼Ox₂₀ ‐derived photoresists can also be developed in water.     

Synthesis of pH‐ and thermoresponsive poly(2‐n‐propyl‐2‐oxazoline) based copolymers

Polymers that possess lower critical solution temperature behavior such as poly(2‐alkyl‐2‐oxazoline)s (PAOx) are interesting for their application as stimulus‐responsive materials, for example in the biomedical field. In this work, we discuss the scalable and controlled synthesis of a library of pH‐ and temperature‐sensitive 2‐n‐propyl‐2‐oxazoline P(nPropOx) based copolymers containing amine and carboxylic acid functionalized side chains by cationic ring opening polymerization and postpolymerization functionalization strategies. Using turbidimetry, we found that the cloud point temperature (CP) is strongly dependent on both the polymer concentration and the polymer charge (as a function of pH). Furthermore, we observed that the CP decreased with increasing salt concentration, whereas the CP increased linearly with increasing amount of carboxylic acid groups. Finally, turbidimetry studies in PBS‐buffer indicate that CPs of these polymers are close to body temperature at biologically relevant polymer concentrations, which demonstrates the potential of P(nPropOx) as stimulus‐responsive polymeric systems in, for example, drug delivery applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1573–1582     

One‐pot synthesis of 2‐phenyl‐2‐oxazoline‐containing quasi‐diblock copoly(2‐oxazoline)s under microwave irradiation

The microwave‐assisted statistical copolymerization of 2‐phenyl‐2‐oxazoline with 2‐methyl‐2‐oxazoline or 2‐ethyl‐2‐oxazoline is discussed in this contribution. Kinetic studies of these statistical copolymerizations as well as reactivity ratio determinations were performed to investigate the monomer distribution in these copoly(2‐oxazoline)s, demonstrating the formation of quasi‐diblock copolymers. In addition, the synthesis of copolymer series with monomer concentrations ranging from 0 to 100 mol % is described. These copolymer series were characterized with ¹H NMR spectroscopy, gas chromatography, and gel permeation chromatography. Moreover, the glass‐transition temperatures and solubility of these copolymers were studied, and this revealing better mixing of poly(2‐methyl‐2‐oxazoline) (pMeOx) with poly(2‐phenyl‐2‐oxazoline) (pPhOx) than poly(2‐ethyl‐2‐oxazoline) (pEtOx) with poly(2‐phenyl‐2‐oxazoline) (pPhOx). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 416–422, 2007.     

Synthesis and properties of gradient copolymers based on 2‐phenyl‐2‐oxazoline and 2‐nonyl‐2‐oxazoline

In this study, the structure–property relationships for a series of statistical 2‐nonyl‐2‐oxazoline (NonOx) and 2‐phenyl‐2‐oxazoline (PhOx) copolymers were investigated for the first time. The copolymerization kinetics were studied and the reactivity ratios were calculated to be r_NonOx = 7.1 ± 1.4 and r_PhOx = 0.02 ± 0.1 revealing the formation of gradient copolymers. The synthesis of a systematical series of NonOx–PhOx copolymers is described, whereby the amount of NonOx was increased in steps of 10 mol %. The thermal and surface properties were investigated for this series of well‐defined copolymers. The thermal properties revealed a linear decrease in glass transition temperature for copolymers containing up to 39 wt % NonOx. Furthermore, the melting temperature of the copolymers containing 0 to 55 wt % PhOx linearly decreased most likely due to disturbance of the NonOx crystalline domains by incorporation of PhOx in the NonOx part of the copolymer. The surface energies of spincoated polymer films revealed a strong decrease in surface energy upon incorporation of NonOx in the copolymers due to strong phase separation between NonOx and PhOx allowing the NonOx chains to orient to the surface. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6433–6440, 2009     

Poly(2‐oxazoline) hydrogels crosslinked with aliphatic bis(2‐oxazoline)s: Properties,cytotoxicity, and cell cultivation

A series of hydrogels from 2‐ethyl‐2‐oxazoline and three bis(2‐oxazoline) crosslinkers—1,4‐butylene‐2,2′‐bis(2‐oxazoline), 1,6‐hexamethylene‐2,2′‐bis(2‐oxazoline), and 1,8‐octamethylene‐2,2′‐bis(2‐oxazoline)—are prepared. The hydrogels differ by the length of aliphatic chain of crosslinker and by the percentage of crosslinker (2–10%). The influence of the type and the percentage of the crosslinker on swelling properties, mechanical properties, and state of water is studied. The equilibrium swelling degree in water ranges from 2 to 20. With a proper selection of the crosslinker, Young's modulus can be varied from 10 kPa to almost 100 kPa. To evaluate the potential for medical applications, the cytotoxicity of extracts and the contact toxicity toward murine fibroblasts are measured. The hydrogels with the crosslinker containing a shorter aliphatic exhibit low toxicity toward fibroblast cells. Moreover, the viability and the proliferation of pancreatic β‐cells incubated inside hydrogels for 12 days are analyzed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1548–1559     

Multifunctional Poly(2‐oxazoline) Nanoparticles for Biological Applications

New multifunctional copoly(2‐oxazoline) nanoparticles were prepared for cell studies. The polymer contains double‐bond side chains as potential reaction sites for “thio”‐click reactions as well as a fluorescein label covalently bound to the polymer backbone. Using the nanoprecipitation technique, spherical nanoparticles of 200–800 nm were obtained. Confocal laser scanning microscopy measurements revealed the cellular uptake of the nanoparticles.

     

Microphase segregation and selective chain scission of poly(2‐methyl‐2‐oxazoline)‐block‐polystyrene

Herein, we report the design and synthesis of a block copolymer (BCP) with a high Flory–Huggins interaction parameter to access 10 nm feature sizes for potential lithographic applications. The investigated BCP is poly[(2‐methyl‐2‐oxazoline)‐block‐styrene] (PMeOx‐b‐PS), where the PMeOx segment functions as a hydrophilic segment. Two BCPs with different molecular weights were prepared using PMeOx as macroinitiator for copper(0) mediated controlled radical polymerization. The thin film self‐assembly of the obtained PMeOx‐b‐PS was performed by solvent annealing and investigated by atomic force microscopy. Both polymers formed PMeOx cylinders in a PS matrix with an average cylinder diameter of 10.5 nm. Additionally, the ability of the PMeOx domains to selectively degrade under ultraviolet irradiation was explored. It was shown that scission of the PMeOx block does occur selectively, and furthermore that the degraded domains can be removed while leaving the PS matrix intact. By combining synthetic accessibility, small feature sizes, and a selectively cleavable domain, this new BCP system holds significant promise as a lithographic mask for patterning surfaces with high precision. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1349–1357     

Temperature‐Sensitive Poly(N‐isopropylacrylamide) Hydrogels with Macroporous Structure and Fast Response Rate

Macroporous temperature‐sensitive poly(N‐isopropylacrylamide) (PNIPA) hydrogels were prepared by a novel phase‐separation technique to improve the response properties. In comparison with a conventional PNIPA hydrogel prepared in water, these macroporous hydrogels, prepared by polymerization in aqueous sucrose solutions, have higher swelling ratios at temperatures below the lower critical solution temperature and exhibit much faster response rates to temperature changes.

Scanning electron microscopy image of the surface of a PNIPA hydrogel, prepared in 1.50 M aqueous sucrose solution.     

Polymer‐Bound Thiol Groups on Poly(2‐oxazoline)s

A new 2‐oxazoline monomer with a protected thiol group, 2‐[2‐(4‐methoxybenzylsulfanyl)ethyl]‐2‐oxazoline, MOB‐SOx , was synthesized from commercially available compounds. MOB‐SOx and 2‐ethyl‐2‐oxazoline (EtOx) were simultaneously polymerized yielding well defined copolymers with narrow molar mass distributions and target polymer chain length. The copolymerization was initiated by N‐methyl‐2‐methyl‐2‐oxazolinium triflate ( MeOxOTf ). After quantitative deprotection, poly(2‐oxazoline) with pendant thiol groups was obtained. The thiol groups were quantitatively added to the double bond of N‐phenyl‐acrylamide ( PhA ) and benzylmaleimide ( BzM ). Graft copolymers were obtained by reaction of those SH containing polymers with poly(2‐methyl‐2‐oxazoline)s bearing acrylamide ( PMeOx ₁₀ A ) and maleimide ( PMeOx ₁₀ M ) as terminal reactive groups.

     

A Green Approach for the Synthesis and Thiol‐ene Modification of Alkene Functio1489lized Poly(2‐oxazoline)s

The bulk polymerization of 2‐(dec‐9‐enyl)‐2‐oxazoline ( DecEnOx ), a fatty acid‐based monomer for the cationic ring‐opening polymerization, is reported. Furthermore, under optimal conditions, namely microwave heating at 100 °C, the bulk copolymerization with 2‐ethyl‐2‐oxazoline yielded well‐defined copolymers. Due to its pendant alkene groups DecEnOx ‐based polymers possess the potential to be modified in efficient thiol‐ene reactions. The functionalization with thiols, e.g., dodecanethiol and 2,3,4,6‐tetra‐O‐acetyl‐1‐thio‐β‐D ‐glycopyranose in “green” solvents is demonstrated.

     

Synthesis and Characterization of pH‐sensitive Poly(IA‐co‐AAc‐co‐AAm) Hydrogels via Frontal Polymerization

In this work, we report a series of poly(itaconic acid‐co‐acrylic acid‐co‐acrylamide) (poly(IA‐co‐AAc‐co‐AAm)) hydrogels via frontal polymerization (FP). FP starts on the top of the reaction mixture with aid of heating provided from soldering iron gun. Once polymerization initiated, no further energy is required to complete the process. The influences of IA/AAc weight ratios on frontal velocities, temperatures, and conversions on the reaction time are thoroughly investigated and discussed where the amount of AAm monomer remains constant. Fourier transform‐infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscope (SEM), dynamic mechanical analysis, and the swelling measurement are applied to characterize the as‐synthesized poly(IA‐co‐AAc‐co‐AAm) hydrogels. Interestingly, the swelling ratios of the hydrogels are changed with different IA/AAc contents, and the maximum swelling ratios are ~4439% in water. SEM images describe highly porous morphologies and explain good swelling capabilities. Moreover, the poly(IA‐co‐AAc‐co‐AAm) hydrogels exhibit superior pH‐responsive ability. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2214–2221     

Scale‐up of Microwave‐Assisted Polymerizations in Batch Mode: The Cationic Ring‐Opening Polymerization of 2‐Ethyl‐2‐oxazoline

Summary: The use of microwave heating in polymer science is a rapidly growing field of research leading to faster and cleaner polymerization procedures. However, the majority of the investigations are performed at small scales (≈1 mL), which is far away from potential commercial applications of microwave‐assisted polymerizations. In addition, it has been shown in organic chemistry that microwave‐assisted reaction protocols can be directly scaled without the need for process optimization. In this contribution, we have investigated the direct scaling of microwave‐assisted polymerization procedures under pressure conditions using the cationic ring‐opening polymerization of 2‐ethyl‐2‐oxazoline as the model system. This polymerization was performed at scales ranging from 4.0 mmol (1 mL) to 1.0 mol (250 mL) in different microwave synthesizers covering both monomode and multimode devices.

Scale‐up of microwave‐assisted polymerizations in batch mode: the cationic ring‐opening polymerization of 2 ethyl‐2‐oxazoline.     

Poly(N‐isopropylacrylamide) Nanoparticle‐Incorporated PNIPAAm Hydrogels with Fast Shrinking Kinetics

Summary: Novel temperature‐responsive poly(N‐isopropylacrylamide) (PNIPAAm) nanoparticle‐containing PNIPAAm hydrogels were prepared by radical polymerization. In comparison with conventional PNIPAAm hydrogels, the PNIPAAm gels thus prepared exhibit much faster response rates as the temperature is raised above the lower critical solution temperature. The improved properties are a result of the incorporation of PNIPAAm particles, which first shrink and then generate pores for water molecules to be quickly squeezed out of the bulky PNIPAAm gels.

Schematic illustration of the shrinking process: (I) First PNIPAAm particles shrink and generate pores; (II) the bulky gels then shrink further at a rapid rate.