A comparative study on the ionic liquid [bmim][BF4] and its solution with transient absorption spectroscopy

A detailed study was explored to compare the transient absorption spectra of the neat 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) with its solution in water or acetonitrile. It was concluded that the excited triplet state ³[bmim]^+* was produced after 266 nm laser irradiation, and then the neutral radical [bmim] and the cation radical [bmim] ²⁺ were formed through two possible paths. The transient absorption spectra of the neat [bmim][BF₄] and its solution were similar but the reaction kinetics were different due to their different local structures such as dimeric or cluster. The energy transfer between excited [bmim][BF₄] and β-carotene further affirmed the existence of ³[bmim]^+*. And the reaction that the hydrated electron captured by [bmim]⁺ to produce [bmim] in solution was observed.     

Intramolecular electron transfer within a covalent, fixed-distance donor-acceptor molecule in an ionic liquid

Intramolecular photoinduced charge separation and recombination within the donor-acceptor molecule 4-(N-pyrrolidino)naphthalene-1,8-imide-pyromellitimide, 5ANI-PI, are studied using ultrafast transient absorption spectroscopy in the room-temperature ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide [EMIM][Tf2N]. The rate constants of both photoinduced charge separation and charge recombination for 5ANI-PI in [EMIM][Tf2N] are comparable to those observed in pyridine, which has a static dielectric constant similar to that of [EMIM][Tf2N] but a viscosity that is nearly 2 orders of magnitude lower than that of [EMIM][Tf2N]. The electron-transfer dynamics of 5ANI-PI in [EMIM][Tf2N] are compared to those in pyridine as a function of temperature and are discussed in the context of recently reported ionic liquid solvation studies.     

Ab initio and NMR studies on the effect of hydration on the chemical shift of hydroxy protons in carbohydrates using disaccharides and water/methanol/ethers as model systems

Density functional theory (DFT) and Hartree-Fock (HF) quantum mechanical calculations have been performed on the disaccharides, [small beta]-l-Fucp-(1[rightward arrow]4)-[small alpha]-d-Galp-OMe, [small beta]-l-Fucp-(1[rightward arrow]4)-[small alpha]-d-Glcp-OMe, and [small beta]-l-Fucp-(1[rightward arrow]3)-[small alpha]-d-Glcp-OMe. The [capital Delta][small delta]-values (difference between the chemical shift in the disaccharide and the corresponding monosaccharide methyl glycoside) for the exchangeable hydroxy protons have been calculated and compared to experimental values previously measured by NMR spectroscopy for samples in aqueous solutions. The calculations performed on molecules in vacuum showed that hydroxy protons hydrogen bonded to the neighboring ring oxygens have large positive [capital Delta][small delta]-values, indicating that they are deshielded relative to those in the corresponding methyl glycoside. The NMR experiments showed instead that these hydroxy protons close to the neighboring ring oxygens were shielded. This discrepancy between calculated and experimental data was attributed to solvent effects, and this hypothesis has been confirmed in this work by monitoring the chemical shift of the hydroxy proton of methanol in water, ethers and water/ether solutions. Shielding of the hydroxy proton of methanol is observed for increased ether concentrations, whereas deshielding is observed for increased concentration of water. The shielding observed for hydroxy protons in disaccharides is a consequence of reduced hydration due to intermolecular hydrogen bonding or steric effects. In strongly hydrated systems such as carbohydrates, the hydration state of a hydroxy proton is the key factor determining the value of the chemical shift of its NMR signal, and the [capital Delta][small delta] will be a direct measure of the change in hydration state.     

Hydrogen bonding mediated ion pairs of some aprotic ionic liquids and their structural transition in aqueous solution

Ion pair speciation of ionic liquids(ILs) has an important effect on the physical and chemical properties of ILs and recognition of the structure of ion pairs in solution is essential. It has been reported that ion pairs of some ILs can be formed by hydrogen bonding interactions between cations and anions of them. Considering the fact that far-IR(FIR) spectroscopy is a powerful tool in indicating the intermolecular and intramolecular hydrogen bonding, in this work, this spectroscopic technique has been combined with molecular dynamic(MD) simulation and nuclear magnetic resonance hydrogen spectroscopy(~1H NMR) to investigate ion pairs of aprotic ILs [Bmim][NO_3], [BuPy][NO_3], [Pyr_(14)][NO_3], [PP_(14)][NO_3] and [Bu-choline][NO_3] in aqueous IL mixtures. The FIR spectra have been assigned with the aid of density functional theory(DFT) calculations, and the results are used to understand the effect of cationic nature on the structure of ion pairs. It is found that contact ion pairs formed in the neat aprotic ILs by hydrogen bonding interactions between cation and anion, were still maintained in aqueous solutions up to high water mole fraction(say 0.80 for [BuPy][NO3]). When water content was increased to a critical mole fraction of water(say 0.83 for [BuPy][NO3]), the contact ion pairs could be transformed into solvent-separated ion pairs due to the formation of the hydrogen bonding between ions and water. With the further dilution of the aqueous ILs solution, the solvent-separated ion pairs was finally turned into free cations and free anions(fully hydrated cations or anions). The concentrations of the ILs at which the contact ion pairs were transformed into solvent-separated ion pairs and solvent-separated ion pairs were transformed into free ions(fully hydrated ion) were dependent on the cationic structures. These information provides direct spectral evidence for ion pair structures of the aprotic ILs in aqueous solution. MD simulation and ~1H NMR results support the conclusion drawn from FIR spectra investigations.     

γ-Radiation effect on ionic liquid [bmim][BF4]

The effect of γ radiation on 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) was investigated in detail. It was found that radiation induced an increase of UV absorption of the ionic liquid but no change in its glass transition point. Raman spectroscopy analysis indicates that the radiolysis of [bmim][BF₄] induces detectable destruction of alkyl-chain and scission of H-atoms of ring of imidizolium cation, and the relatively small changes of BF₄⁻ anion. Viscosities of irradiated [bmim][BF₄] samples were measured at different shear rates and temperatures, and compared with irradiated [bmim][PF₆] samples. The plots of shear stress against shear rate indicates that [bmim][BF₄] is a Newtonian fluid, no matter with irradiation. The viscosity of irradiated [bmim][BF₄] decreased with increasing of temperature and followed an Arrhenius equation. However, radiation caused no change in the viscosity of [bmim][BF₄], but a decrease in the viscosity of [bmim][PF₆] by up to 10%. We conclude that the radiation stability of [bmim][BF₄] is higher than [bmim][PF₆].     

双功能离子液体的合成及二氧化碳捕集性能

采用两步法合成了新型功能化离子液体1-甲氧基乙基-3-甲基咪唑甘氨酸([C_3O_1mim][Gly]),并研究了其对CO_2的吸收性能.利用核磁共振、红外光谱及热重分析等手段进行表征,验证了该离子液体的结构,且发现其具有较高的热稳定性.对比单乙醇胺(MEA),考察了[C_3O_1mim][Gly]在不同温度下对CO_2的捕集能力,结果表明,[C_3O_1mim][Gly]在40℃下的吸收容量可达1.26 mol CO_2/mol IL,远高于MEA,这表明[C_3O_1mim][Gly]对CO_2具有良好的吸收能力,吸收容量随着温度升高而降低.该离子液体同时具有良好的循环稳定性,进行5次吸收解吸操作后仍可保持较高的CO_2吸收量.对该离子液体吸收CO_2进行了动力学研究,结果表明,Pseudo-second-order模型能够较好地描述该吸收过程.     

吡啶离子液体[BPy][BF4]与乙腈混合体系中杜醌的光化学反应动力学

用激光闪光光解方法研究了杜醌(DQ)在吡啶型离子液体N-丁基吡啶四氟硼酸盐([BPy][BF₄])与乙腈(MeCN)组成的共混溶剂中的光化学反应机理与动力学. 实验结果表明, 离子液体[BPy][BF₄]对混合体系中杜醌激发三线态(³DQ^*)的瞬态吸收峰位置和吸光度大小都没有产生明显影响. 在N₂饱和条件下, 无论是在乙腈溶液中还是在[BPy][BF₄]/MeCN混合溶液中³DQ^*的衰减都遵循一级反应动力学规律. 而[BPy][BF₄]的存在对³DQ^*与三乙胺(TEA)之间的电子转移影响显著. 随着[BPy][BF₄]/MeCN 体系中离子液体比例的增加, 杜醌三线态³DQ^*与TEA间的瞬态反应机理没有改变, 但它们之间的光诱导电子转移反应速率和生成自由基的量子产额逐渐降低, 通过改变离子液体的比例可以调节该体系中光诱导电子转移反应的速率和效率.     

Facilitated hydride binding in an Fe-Fe hydrogenase active-site biomimic revealed by X-ray absorption spectroscopy and DFT calculations

Iron-only hydrogenases are high-efficiency biocatalysts for the synthesis and cleavage of molecular hydrogen. Their active site is a diiron center, which carries CO and CN ligands. Remarkably, the two iron atoms likely are connected by a non-protein azadithiolate (adt = S-CH2-NH-CH2-S). To dwell on the role of the adt in H2 catalysis, a specific biomimetic diiron compound, 1 = [Fe2(mu-adt-CH2-Ph)(CO)4(PMe3)2], with unprecedented positive reduction potential, has been synthesized and crystallized previously. It comprises two protonation sites, the N-benzyl-adt nitrogen that can hold a proton (H) and the Fe-Fe bond that will formally carry a hydride (Hy). We investigated changes in the solution structure of 1 in its four different protonation states (1', [1H]+, [1HHy]2+, and [1Hy]+) by X-ray absorption spectroscopy at the iron K-edge. EXAFS reveals that already protonation at the adt nitrogen atom causes a change of the ligand geometry involving a significant lengthening of the Fe-Fe distance and CO and PMe3 repositioning, respectively, thereby facilitating the subsequent binding of a bridging hydride. Hydride binding clearly is discernible in the XANES spectra of [1HHy]2+ and [1Hy]+. DFT calculations are in excellent agreement with the experimentally derived structural parameters and provide complementary insights into the electronic structure of the four protonation states. In the iron-only hydrogenases, protonation of the putative adt ligand may cause the bridging CO to move to a terminal position, thereby preparing the active site for hydride binding en route to H2 formation.     

Solvation of UCl6(2-) anionic complex by MeBu3N(+), BuMe2Im(+), and BuMeIm(+) cations

The complexes [MeBu 3N] 2[UCl 6] and [BuMe 2Im] 2[UCl 6] were characterized in the solid state and in solution of [MeBu 3N][Tf 2N], [BuMe 2Im][Tf 2N], and [BuMeIm][Tf 2N] room-temperature ionic liquids using single-crystal XRD, EXAFS, electrochemistry, UV-visible absorption spectroscopy, and NMR. In the solid state and in solution, the existence of hydrogen bonding between the UCl 6 (2-) complex and the ionic liquid cations was revealed by these techniques. The MeBu 3N (+) cation interacts with UCl 6 (2-) via the protons on the alpha-carbon atoms of nitrogen. The protons of the imidazolium ring account for the interaction between the BuMe 2Im (+) cation and the UCl 6 (2-) anion. For the BuMeIm (+) cation the major interaction was confirmed between the most acidic proton on C(2) and the chlorides of UCl 6 (2-). The experimental results also show that the intensity of the interaction between the UCl 6 (2-) anion and the cation varies with the ionic liquid cation in the following order: MeBu 3N (+) approximately BuMe 2Im (+) < BuMeIm (+).     

Structures of ionic liquids with different anions studied by infrared vibration spectroscopy

We investigated the structures of ionic liquids (1-butyl-3-methylimidazolium iodide [BMIM][I] and 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF4]) and their aqueous mixtures using attenuated total reflection (ATR) infrared absorption and Raman spectroscopy. The ATR spectrum in the CHx (x = 1, 2, 3) vibration region from 2800 to 3200 cm-1 was very different between [BMIM][BF4] and [BMIM][I] even though all the spectral features in this region were from the butyl chain and the imidazolium ring of the same cation. The spectrum did not change appreciably irrespective of the water concentration for [BMIM][BF4], whereas the spectrum from [BMIM][I] showed significant changes as the water concentration was increased, especially in CH-vibration modes from the imidazolium ring. For very diluted solutions both aqueous mixtures of [BMIM][I] and [BMIM][BF4] showed very similar spectra. Mixing of [BMIM][I] with heavy water (D2O) facilitated the isotopic exchange of the proton attached to the most acidic carbon of the imidazolium ring into deuterium from D2O, whereas even prolonged exposure to D2O did not induce any isotopic exchange for [BMIM][BF4]. Raman spectra around 600 cm(-1) indicative of the butyl chain conformation also changed differently as the water concentration was increased between [BMIM][I] and [BMIM][BF4]. These differences are considered to come from the variation in the position of the anion, where I- is expected to be closer to the C(2) hydrogen of the imidazolium cation and interacting more specifically as compared to BF(4-).     

Enhanced refolding of lysozyme with imidazolium-based room temperature ionic liquids: Effect of hydrophobicity and sulfur residue

The expression of recombinant proteins in microorganism frequently leads to the formation of insoluble aggregates, inclusion bodies (IBs). Thus, the additional in vitro protein refolding process is required to convert inactive IBs into water-soluble active proteins. This study investigated the effect of sulfur residue and hydrophobicity of imidazolium-based room temperature ionic liquids (RTILs) on the refolding of lysozyme as a model protein in the batch dilution method which is the most commonly used refolding method. When lysozyme was refolded in the refolding buffer containing [BF4]-based RTILs with a systematic variety of alkyl chain on cations varying from two to eight, less hydrophobic imidazolium cations having shorter alkyl chains were effective to facilitate lysozyme refolding. Compared to the conventional refolding buffer, 2 times higher lysozyme refolding yield was obtained in 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF4]) containing refolding buffer. The refolding yield of lysozyme was even more increased by 2.5 times when 1-butyl-3-methylimidazolium methylsulfate ([BMIM][MS]) containing sulfur residue on anion was used. The sulfur residue in [BMIM][MS] is supposed to improve the refolding yield of lysozyme which has 4 intramolecular disulfide bonds. For dilution-based refolding of lysozyme, the optimum concentrations of RTILs in refolding buffer were found to be 1.0 M [EMIM][BF4] and 0.5 M [BMIM][MS], respectively. The optimum temperate for dilution-based refolding of lysozyme with RTILs was 4 °C.     

Structural, photophysical, and catalytic properties of Au(I) complexes with 4-substituted pyridines

Ionic gold(I) complexes with general formula of [Au(Py)2][AuCl2] and [Au(Py)2][PF6] (Py = 4-substituted pyridines) have been synthesized. Structures of five Au(I) complexes and a Ag(I) complex were determined by single crystal X-ray diffraction. Evidence for cationic aggregation of [Au(py)2][PF6] complexes in solution was obtained by conductivity measurements and by the isosbestic point observed from variable temperature UV-visible absorption spectra. All compounds were luminous in the solid state. Calculations employing density functional theory were performed to shed light on the nature of the electronic transitions. While the [Au(4-dmapy)2][AuCl2] (4-dmapy = 4-dimethylaminopyridine) and [Au(4-pic)2][AuCl2] (4-pic = 4-picoline) emissions were found to be mainly ligand in nature, their [PF6](-) counterparts involved a Au...Au-interaction imbedded in the highest occupied molecular orbital. [Au(4-dmapy)2][AuCl2] was found to be an efficient catalyst for Suzuki cross-coupling of aryl bromide and phenylboronic acid.     

Effect of water on the interfacial structures of room-temperature ionic liquids

The interfacial structures of cyano-based room-temperature ionic liquids play a very important role in reducing friction. However, the presence of water impairs their tribological performance. The interfacial structures and friction forces of 1-ethyl-3-methylimidazolium dicyanamide, [EMIM][DCN], and the effect of water on these structures and forces were investigated using atomic force microscopy. In addition, the interaction of water and [EMIM][DCN] was evaluated using Fourier-transform infrared (FT-IR) spectroscopy. Multiple repulsive layers were observed in the [EMIM][DCN] solution. This solution showed low friction force because these repulsive layers worked as protective layers against friction. On the other hand, the specific repulsive layer characteristics of [EMIM][DCN] could not be observed in a [EMIM][DCN] + 2 wt% H₂O solution. FT-IR results indicated that the layer structure of [EMIM][DCN] was disturbed by the addition of H₂O. Therefore, the solution containing water exhibited a high friction force.     

Uranyl complexation by chloride ions. Formation of a tetrachlorouranium(VI) complex in room temperature ionic liquids [Bmim][Tf2N] and [MeBu3N][Tf2N

The tetrachlorouranium(VI) complex is formed in [Bmim][Tf2N] and [MeBu3N][Tf2N] from a uranium(VI) solution in the presence of a stoichiometric quantity of chloride ions. The [UVIO2Cl4]2- absorption and emission spectra show bands splitting in comparison with the [UVIO2]2+ spectra, as observed in the solid state, organic solvents, and chloroaluminate-based ionic liquids. The fluorescence lifetime of [UO2Cl4]2- in [MeBu3N][Tf2N] is 0.7 +/- 0.1 mus. The reduction potential of this complex is -1.44 and -1.8 V vs Ag/Ag+ respectively in [Bmim][Tf2N] and [MeBu3N][Tf2N] and does not depend on the chloride concentration. The mechanism proposed for the redox process is a monoelectronic reduction to form [UVO2Cl4]3-, followed by a chemical reaction. The tetrachlorouranium(V) complex seems more stable in [Bmim][Tf2N] than in [MeBu3N][Tf2N]. The electrochemical analysis put in evidence specific interactions of the ionic liquid cation with the uranium anionic species.     

Self-assembling molecular wires of halogen-bridged platinum complexes in organic media. Mesoscopic supramolecular assemblies consisting of a mixed valent Pt(II)/Pt(IV) complex and anionic amphiphiles

A novel class of supramolecular assemblies in organic media consisting of a molecular wire of a halogen-bridged platinum complex [Pt(en)2][PtCl2(en)2]4+ (en = 1,2-diaminoethane) and anionic amphiphiles is developed. When double-chained phosphates or sulfonates are employed, the resultant [Pt(en)2][PtCl2(en)2](4+)-lipid complexes displayed intervalence charge transfer (CT) absorption bands in the crystalline state. They are soluble in organic solvents because of the amphiphilic superstructure, in which the solvophobic one-dimensional platinum complex is surrounded by solvophilic alkyl chains. CT absorption bands of halogen-bridged linear complexes are maintained in organic media, with varied colors that depend on the chemical structure of constituent amphiphiles. Monoalkylated phosphates failed to form colored, halogen-bridged ternary complexes probably because of their coordination to the axial position of PtII(en)2. Formation of mesoscopic supramolecular assemblies in organic media was confirmed for the [Pt(en)2][PtCl2(en)2] complexes by electron microscopy. Interestingly, a supramolecular complex consisting of dihexadecyl sulfosuccinate and [Pt(en)2][PtCl2(en)2]4+ displayed clear, indigo solutions that are distinct from the yellow color observed for those of [Pt(en)2][PtCl2(en)2]/dialkyl phosphate complexes. The indigo color of the former complex disappeared upon heating the solution to 60 degrees C, whereas it reappeared reversibly by cooling the solution to room temperature. In electron microscopy, rodlike nanostructures with a minimum width of 18 nm and lengths of 700-1700 nm were observed after cooling, though not at elevated temperatures. Apparently, the lipid-[Pt(en)2][PtCl2(en)2]4+ complex undergoes reversible dissociation and reassembly processes in chloroform, and it becomes better dispersed after the reassembling process. The present finding opens a general route to solution chemistry of low-dimensional inorganic complexes and enables rational design and control of self-assembling inorganic molecular wires.     

Coordination behaviour of the multidentate Schiff base 2,6-bis(2-hydroxyphenyliminomethyl)pyridine towards the fac-[Re(CO)3] and [ReO] cores

The seven-coordinate rhenium(III) complex cation [Re^III(dhp)(PPh₃)₂]⁺ was isolated as the iodide salt from the reaction of cis-[Re^vO₂I(PPh₃)₂] with 2,6-bis(2-hydroxyphenyliminomethyl)pyridine (H₂dhp) in ethanol. In the complex fac-[Re(CO)₃(H₂dhp)Br], prepared from [Re(CO)₅Br] and H₂dhp in toluene, the H₂dhp ligand acts as a neutral bidentate N,N-donor chelate. The complexes were characterized by elemental analysis, infrared and ¹H NMR spectroscopy and X-ray crystallography.     

Headspace Single Drop Microextraction Using Micellar Ionic Liquid Extraction Solvents

A headspace single drop microextraction (SDME) method using extraction solvents comprised of micellar ionic liquids (ILs) was used to perform the extraction of 17 aromatic compounds from aqueous solution and coupled with liquid chromatography. The effects of various experimental parameters including type of micellar IL extraction solvent, stir rate, extraction time, volume of the microdroplet, and addition of organic solvent were investigated and optimized. Two different micellar solutions were formed by dissolving 1-decyl-3-methylimidazolium bromide ([DMIM][Br]) and sodium dodecyl sulfate (SDS) in 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]). It was observed that the enrichment factors of the 17 studied compounds were all enhanced with the micellar ionic liquid extraction solvent compared to the neat [BMIM][Cl] IL. The highest sensitivity was obtained with the [BMIM][Cl]–[DMIM][Br] micellar solution for polycyclic aromatic hydrocarbons (PAHs) with high molecular weight and fused rings while the [BMIM][Cl]–SDS micellar solution was proven to be more sensitive for smaller, more polar molecules. The detection limits were lower when utilizing the [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] extraction solvents compared to the neat [BMIM][Cl] extraction solvent. The reproducibility of the extraction method at 20 °C using extraction solvents composed of [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] ranged from 6.7 to 14.0 and 4.2 to 14.7%, respectively.     

Synthesis and spectroscopic DNA binding studies of homoleptic and heteroleptic ruthenium(II) complexes with imidazo[4,5-f] [1,10]phenanthroline or its derivatives

Two series of new complexes, [Ru(phen)2L]2+ and [RuL3]2+, where phen = 1,10-phenanthroline, and L denotes imidazo[4,5-f][1,10]phenanthroline (IP) or 2-(4-R-phenyl)imidazo[4,5-f][1,10]phenanthroline(PIP, R = H; HOP, R = –OH; MOP, R = –OMe; DMNP, R = NMe2; CLP, R = Cl; NOP, R = NO2), were synthesized and characterized. Their binding to calf thymus DNA was investigated using electronic absorption and emission spectroscopy. [Ru(IP)3]2+ and each [Ru(phen)2 L]2+ showed dramatic absorption hypochromism and bathochromicity, as well as steady-state emission intensity and excited-state lifetime enhancements {except nonluminescent [Ru(phen)2NOP]2+} associated with the presence of DNA, inferring that they bind to DNA by intercalation. These phenomena were not observed for [RuL3]2+ type complexes (except L = IP), indicating that they bind to DNA at most through electrostatic interactions.     

离子液体[BMIM]Br与[BMIM][BF4]配比浓度对Br-离子电荷转移的调节

利用X射线吸收精细结构光谱(XAFS)及紫外吸收光谱两种方法, 分析了离子液体1-丁基-3-甲基咪唑溴盐([BMIM]Br)中逐渐掺入1-丁基-3-甲基咪唑四氟硼酸盐([BMIM][BF₄])时, Br^-阴离子与咪唑阳离子之间氢键作用及电荷偏移量的改变. 随着[BMIM][BF₄]加入量增多, Br 元素XAFS近边(XANES)显示吸收峰降低, 吸收边位置向低能端位移0.9 eV; 扩展边(EXAFS)算出径向结构显示Br 与近邻原子间平均配位数降低、平均键长增长; 紫外光谱也有明显蓝移减色效应. 这些结果都表明Br₄^-的掺入改变了Br^-与阳离子间的电荷偏移量, 负电荷更多地转移到Br^-上, 量化计算的数据同样支持该结论.     

Nonadiabatic molecular dynamics simulations of correlated electrons in solution. 2. A prediction for the observation of hydrated dielectrons with pump-probe spectroscopy

The hydrated dielectron is a highly correlated, two-electron, solvent-supported state consisting of two spin-paired electrons confined to a single cavity in liquid water. Although dielectrons have been predicted to exist theoretically and have been used to explain the lack of ionic strength effect in the bimolecular reaction kinetics of hydrated electrons, they have not yet been observed directly. In this paper, we use the extensive nonadiabatic mixed quantum/classical excited-state molecular dynamics simulations from the previous paper to calculate the transient spectroscopy of hydrated dielectrons. Because our simulations use full configuration interaction (CI) to determine the ground and excited state two-electron wave functions at every instant, our nonequilibrium simulations allow us to compute the absorption, stimulated emission (SE), and bleach spectroscopic signals of both singlet and triplet dielectrons following excitation by ultraviolet light. Excited singlet dielectrons are predicted to display strong SE in the mid infrared and a transient absorption in the near-infrared. The near-infrared transient absorption of the singlet dielectron, which occurs near the peak of the (single) hydrated electron's equilibrium absorption, arises because the two electrons tend to separate in the excited state. In contrast, excitation of the hydrated electron gives a bleach signal in this wavelength region. Thus, our calculations suggest a clear pump-probe spectroscopic signature that may be used in the laboratory to distinguish hydrated singlet dielectrons from hydrated electrons: By choosing an excitation energy that is to the blue of the peak of the hydrated electron's absorption spectrum and probing near the maximum of the single electron's absorption, the single electron's transient bleach signal should shrink or even turn into a net absorption as sample conditions are varied to produce more dielectrons.