Gold Carbene or Carbenoid: Is There a Difference?

By reviewing the recent progress on the elucidation of the structure of gold carbenes and the definitions of metal carbenes and carbenoids, we recommend to use the term gold carbene to describe gold carbene‐like intermediates, regardless of whether the carbene or carbocation extreme resonance dominates. Gold carbenes, because of the weak metal‐to‐carbene π‐back‐donation and their strongly electrophilic reactivity, could be classified into the broader family of Fischer carbenes, although their behavior and properties are very specific.     

Is There a Minimum Electrophilicity Principle in Chemical Reactions？

For 25 simple reactions, the changes of the hardness （△η）, polarizability （△α） and electrophilicity index （△ω） and their cube-roots （△η^1/3, △α^1/3, △ω^1/3） were calculated. It is shown that although the Maximum Hardness and Minimum Polarizability Principles are not valid for all reactions, but in most cases △ω^1/3〈0, whereas we always find △ω〈0. Our observation implies to this fact that for those chemical reactions in which the number of moles decreases or at least remains constant, the most stable species （reactants or products） have the lowest sum of electrophilicities. In other words ＂the natural direction of a chemical reaction is toward a state of minimum electrophilicity＂. This fact may be called Minimum Electrophilicity Principle （MEP）.     

Ultra-Weak Metal−Metal Bonding: Is There a Beryllium-Beryllium Triple Bond?

Metal-metal triple bonds featuring s-block element have not been reported until now. Only Be−Be double bonds between have been predicted theoretically based on the intuitive electron donation from four s¹ type electron-donating ligands. Herein, we theoretically predicted a novel species featuring a Be−Be triple bond in the Li₆Be₂ molecule. The molecule was found to be thermodynamically stable. The presence of the triple bond was confirmed by adaptive natural density partitioning (AdNDP), electron localization function (ELF), and atoms in molecules (AIM) analyses. Moreover, the mechanical strength of the Be−Be triple bond was analyzed by using compliance matrix, pointing towards its ultra-weak nature.     

Characterization of Supercomplex Crude Oil Mixtures: What Is Really in There?

Through different windows : One major obstacle in energy research is the complexity and variety of compounds present in crude oil. A study of different ionization methods for mass spectrometry shows that the mass spectrum very strongly depends on which method is used.

     

Does Chemistry Have a Future in Therapeutic Innovations?

A bright future for small molecules: Drugs based on molecules made by chemists are far from old-fashioned. Although biopharmaceuticals developed during the last two decades may have caught the public's imagination, traditional drugs remain a strong force in the pharmaceutical industry. Effective, inexpensive small-molecule drugs are crucial in fighting diseases and maintaining cost-effective health care.     

Is There a Single Ideal Parameter for Halogen-Bonding-Based Lewis Acidity?

Halogen-bond donors (halogen-based Lewis acids) have now found various applications in diverse fields of chemistry. The goal of this study was to identify a parameter obtainable from a single DFT calculation that reliably describes halogen-bonding strength (Lewis acidity). First, several DFT methods were benchmarked against the CCSD(T) CBS binding data of complexes of 17 carbon-based halogen-bond donors with chloride and ammonia as representative Lewis bases, which revealed M05-2X with a partially augmented def2-TZVP(D) basis set as the best model chemistry. The best single parameter to predict halogen-bonding strengths was the static σ-hole depth, but it still provided inaccurate predictions for a series of compounds. Thus, a more reliable parameter, Ω_σ*, has been developed through the linear combination of the σ-hole depth and the σ*(C−I) energy, which was further validated against neutral, cationic, halogen- and nitrogen-based halogen-bond donors with very good performance.     

Concentrated Ionic Fluids: Is There a Difference Between Chloride-Based Brines and Deep Eutectic Solvents?

Deep Eutectic Solvents (DESs) have been lauded as novel solvents, but is there really a difference between them and concentrated aqueous brines? They provide a method of adjusting the activity of water and chloride ions which can affect mass transport, speciation and reactivity. This study proposes a continuum of properties across concentrated ionic fluids and uses metal processing as an example. Charge transport is shown to be governed by fluidity and there is no discontinuity between molar conductivity and fluidity irrespective of cation, charge density or ionic radius. Diffusion coefficients of iron(III) and copper(II) chloride in numerous concentrated ionic fluids show the same linear correlation between diffusion coefficient and fluidity. These oxidising agents were used to etch copper, silver and nickel and while the etching rate increased with fluidity for copper, etching of silver and nickel only occurred at high chloride and low water activity as passivation occurred when water activity increased. Overall, brines provide a high chloride content at a lower viscosity than DESs, but unlike DESs, brines are unable to prevent passivation due to their high water content. The results show how selective etching of mixed metal waste streams can be achieved by tuning chloride and water activity.     

Charged versus Neutral Hydrogen‐Bonded Complexes: Is There a Difference in the Nature of the Hydrogen Bonds?

A theoretical study on some carboxylic acid dimers formed by positively or negatively charged molecules has been carried out by using DFT methods. The resulting dimers possess either a charge of +2 or ?2. In addition, the corresponding neutral complexes have also been considered. The electron density distribution described by the atoms in molecules and the natural bond orbital methods, as well as the electric field maps of the systems, have been analyzed and compared without finding significant differences between the neutral and ionic complexes. The interaction energy along the dissociation path of the charged dimers shows both a local minimum and a local maximum, defining a stability region between them. When this energetic profile is recalculated by removing the repulsion between the charged groups, it resembles to those of the neutral molecules. Hence, the characteristics of the charged dimers are similar to those of the neutral ones: the addition of a repulsion term for the charged groups permits to retrieve the energetic profiles dependence with the distance in the charged system. The interacting quantum atom (IQA) method has been used to calculate the interaction energy terms, including the classic Coulombic term between the whole molecules and the corresponding of the carboxylic acid groups. The IQA results show repulsive electrostatic interactions when the whole molecules are considered in the ionic complexes, but attractive ones between the carboxylic groups in both neutral and ionic complexes.     

Is There a Novel Biosynthetic Pathway in Mice That Converts Alcohol to Dopamine,Norepinephrine and Epinephrine?

Previous studies in animals and humans have shown multiple types of interaction between alcohol (ethanol) intake and the catecholamine signaling molecules: dopamine, norepinephrine and epinephrine. This literature suggests that the administration of alcohol to rodents affects the central and peripheral (blood plasma) levels of these catecholamines. Two prior publications (Fitzgerald 2012, 2020) put forth the hypothesis that there may be a currently unidentified biosynthetic pathway, in a range of organisms, that actually converts alcohol to dopamine, norepinephrine and epinephrine. This publication describes the details for how to test this hypothesis in mice. Mice can be systemically injected with an intoxicating dose of commercially available stable isotope-labeled ethanol (ethanol-1-¹³C), and blood plasma samples and brains can be collected approximately two to 24 h post-injection. Liquid chromatography-mass spectrometry analysis can then be used to test whether some of the labeled ethanol molecules have been incorporated into new dopamine, norepinephrine, and epinephrine molecules, in plasma and brain samples. If confirmed, this hypothesis may have broadly reaching implications both for basic neuroscience and our understanding of alcohol abuse and alcoholism.     

Is There a “Most Chiral Tetrahedron”?

A degree of chirality is a function that purports to measure the amount of chirality of an object: it is equal for enantiomers, vanishes only for achiral or degenerate objects and is similarity invariant, dimensionless and normalisable to the interval [0,1]. For a tetrahedron of non-zero three-dimensional volume, achirality is synonymous with the presence of a mirror plane containing one edge and bisecting its opposite, and hence it is easy to design degree-of-chirality functions based on edge length that incorporate all constraints. It is shown that such functions can have largest maxima at widely different points in the tetrahedral shape space, and by incorporation of appropriate factors, the maxima can be pushed to any point in the space. Thus the phrase "most chiral tetrahedron" has no general meaning: any chiral tetrahedron is the most chiral for some legitimate choice of degree of chirality.     

Is Curcumin the Answer to Future Chemotherapy Cocktail?

The rise in cancer cases in recent years is an alarming situation worldwide. Despite the tremendous research and invention of new cancer therapies, the clinical outcomes are not always reassuring. Cancer cells could develop several evasive mechanisms for their survivability and render therapeutic failure. The continuous use of conventional cancer therapies leads to chemoresistance, and a higher dose of treatment results in even greater toxicities among cancer patients. Therefore, the search for an alternative treatment modality is crucial to break this viscous cycle. This paper explores the suitability of curcumin combination treatment with other cancer therapies to curb cancer growth. We provide a critical insight to the mechanisms of action of curcumin, its role in combination therapy in various cancers, along with the molecular targets involved. Curcumin combination treatments were found to enhance anticancer effects, mediated by the multitargeting of several signalling pathways by curcumin and the co-administered cancer therapies. The preclinical and clinical evidence in curcumin combination therapy is critically analysed, and the future research direction of curcumin combination therapy is discussed.     

Bacteria encapsulation in colloidal inorganic matrices: Is it a general method?

Zirconium oxyhydroxide nanoparticles prepared by an aqueous route were evaluated for Escherichia coli bacteria encapsulation. A low viability rate was measured 24 hours after immobilization that could be attributed to nanoparticle cytotoxicity. Moreover, the presence of glycerol, a long-term cell-preserving molecule, hindered gel formation, probably due to its adsorption on the nanoparticle surface. A comparison with boehmite and ferrihydrite gels previously synthesized following a similar aqueous colloidal route suggests that the generalization of this method will rely on a careful control of the nanoparticle surface reactivity and may require surface chemical modification.     

Can Polyethylene be a Photo(bio)Degradable Synthetic Polymer?

Abstract

A polymeric system based on LDPE would be qualified as a “photo(bio)degradable synthetic polymer” for use as films or thin systems in plasticulture and later in packaging where severe specific criteria should be respected. The evolution of such a system in environmental conditions should present three phases. In Phase I, corresponding to storage and use, in the presence of physicochemical and biological aggression, chemical evolution should be very limited and resistance to any microorganism should be observed. In Phase II a rapid abiotic degradation should occur until the complete destruction of physical (mechanical) properties and spontaneous fragmentation of the thin systems into more and more divided parts. Phase III corresponds to bioassimilation of heavily transformed (oxidized) solid particles. Phase I should be predicted and controlled on the basis of artificial photoaging or thermoaging experiments. Depending on the desired lifetime of the system, nonaccelerated, accelerated, or ultra-accelerated photoaging techniques could be used. The earliest fragmentation, which should be observed in Phase II, should be predicted within the same experiment. The prediction of the long-term fate of the polymeric materials should be based not only on the variations of physical properties but on a full analysis of the chemical evolution, i.e., determination of the major final transformed groups of the macromolecular chains (and especially the acidic end groups) and the molar mass distribution. In a recent BRITE-EURAM European contract, we developed an experimental protocol for the control of Phase III based on the use of pure cultures of strains from collections or selected adapted wild strains (from industrial polyethylene site dumpings) which had been examined. Abiotically oxidized LDPE was the only carbon source in a starving mineral medium. Bioerodibility caused by the carboxylic acid formed throughout abiotic degradation has been observed.