Novel fullerene‐grafted poly(3‐hexylthiophene) (P3HT)‐based rod‐coil block copolymers have been synthesized. The regioregular P3HT rod block has been synthesized by a modified Grignard metathesis reaction (GRIM). An original in situ end‐capping reaction has been developed in order to convert the P3HT block into an efficient macro‐initiator for the nitroxide‐mediated radical polymerization (NMRP) of the coil block. Controlled radical polymerization of the second poly(butylacrylate‐stat‐chloromethylstyrene) [P(BA‐stat‐CMS)] block has been done through various conditions leading to different coil block lengths. The final electron donor‐acceptor block copolymer has been obtained after C60 grafting in soft conditions. Copolymers have been characterized by 1H NMR and size exclusion chromatography. Optical characterizations, before and after C60 grafting, are reported.
In this communication, β‐cyclodextrin modified quantum dots were used as a water‐soluble “supramolecular” cross‐linker (SCL) because of its surface's supramolecular activity. The guest monomer‐loaded SCL (mSCL) can be used to copolymerize with water‐soluble monomers leading to transparent hybrid supramolecular hydrogels. This simple and versatile method opens new venues for the preparation of hybrid supramolecular hydrogels and the host–guest chemistry of cyclodextrins.
A high molecular weight ladder polymer based on 5,5′,6,6′‐tetrahydroxy‐3,3,3′,3′‐tetramethylspirobisindane and 1,4‐dicyanotetraflurobenzene has been synthesized by polycondensation under high‐intensity mixing conditions at about 155 °C and cyclic‐free products were obtained in high yield with low molecular weight distribution (1.7–2.3). The reaction could be completed within a few minutes. The polymer properties were characterized by GPC, 1H NMR, 13C NMR, F NMR, FT‐IR, and MALDI‐TOF MS. In addition, the mechanical properties, apparent surface areas and gas permeability are also reported. This procedure can also be used for the synthesis of other ladder polymers by irreversible polycondensations of tetraphenols with activated tetrafluoro aromatics.
A compositional graded film of poly(ε‐caprolactone) (PCL) with 4,4′‐thiodiphenol (TDP), in the film thickness direction, was fabricated by self‐diffusing of TDP in the PCL melt. We found out the self‐bending deformation of the gradient film, which bent into a rolled‐up shape by itself. The initial shape of the film was flat when the sample was quenched from the melt. Upon the fast crystallization of PCL, the gradient film bent to the side with low TDP content. Then, after PCL crystallized the film bent to the opposite direction, that is, to the side with high TDP content. This bending to the TDP rich region was induced by not only the crystallization of PCL but also mass transfer due to the diffusion of TDP from TDP rich region to poor region.
Chemical modification reactions of alkyne containing polyHEMA‐based macroporous network structures (cryogels) by Cu(I) catalyzed azide‐alkyne ‘click’ cycloaddition reactions and their monitoring and quantification with high‐resolution magic angle spinning (hr‐MAS) NMR spectroscopy are reported. Complete conversion is obtained when benzylazide is reacted with the grafted alkyne function, but only partial conversion is observed when using azide‐modified poly(ethylene glycol) (PEG‐N3). Subsequent addition of benzylazide consumes all remaining alkyne groups. All chemical modifications are easily monitored at each stage using hr‐MAS NMR spectroscopy. The alkyne functionality and the resulting triazole ring provide well resolved 1H resonances to monitor and quantify the progress of such ‘click’ reactions in general.
Sixteen parallel polymerization reactions of 2‐ethyl‐2‐oxazoline have been performed at different temperatures in an automated synthesizer that allowed individual heating of each reactor. During the reactions samples were taken automatically, which were characterized by means of both online GPC and offline GC, in order to optimize the reaction temperature and to determine the activation energy of the polymerization.
Summary: We describe an interesting approach to the fabrication of wettability gradients from hydrophobicity to superhydrophobicity in low‐density polyethylene (LDPE) films by first forming high porosity surfaces and placing the specimens onto linear temperature gradients. While the polymer chosen for the study is non‐polar, its microporous layer provides sufficient superhydrophobicity. Lateral gradient heating of the layer results in partial melting of the polymer and correspondingly decreases porosity thus decreasing hydrophobicity.
Large scale of well‐ordered macroporous π‐conjugated polymer monoliths have been successfully prepared through a new approach using micrometer‐sized naphthalene crystals as templates. The macroporous monoliths of poly(p‐phenylenevinylene) (PPV) and poly(p‐phenyleneethynylene) (PPE) grew along the unidirectional freezing direction inside the template naphthalene crystals which lead to the formation of controlling morphologies and homogeneous diameters. The polymer monoliths show straight and lamella macroporous structures. The diameters of pores and the thickness of pore walls can be controlled by tuning the freezing temperature.
A single stage electrospinning process can give rise to preferentially oriented induced dipoles in poly(vinylidene fluoride‐trifluoroethylene) [P(VDF‐TrFE)] nanofibers. The piezoelectricity of as‐electrospun P(VDF‐TrFE) nanofiber webs opens up new possibilities for their use as a flexible nanogenerators and nano‐pressure sensors. In this work, the origin of the piezoelectricity has been spotlighted by randomization of the induced dipoles at the Curie temperature and analyzed by polarized FT‐IR spectroscopic techniques as well as by detecting the piezoelectric signal from a nano‐pressure sensor.
The mixed Langmuir monolayers and Langmuir–Blodgett (LB) films of homo‐polystyrene (h‐PS) and the diblock copolymer polystyrene‐block‐poly(2‐vinylpyridine) (PS‐b‐P2VP) have been characterized by the Langmuir monolayer technique and tapping mode atomic force microscopy (AFM), respectively. When the content of h‐PS is below 80 wt.‐%, the mixed LB films of h‐PS/PS‐b‐P2VP mainly exhibit isolated circular nanoaggregates. With a further increase of the h‐PS content (80–95%), however, highly uniform and stable necklace‐network structures are observed in the mixed LB films.
Summary: Fully linear polyethylene‐based latexes have been prepared by the hydrogenation of polybuta‐1,4‐diene dispersions. The latter were synthesized via dispersion ring‐opening metathesis polymerization of cycloocta‐1,5‐diene, and hydrogenated using RuCl2(PPh3)3 as catalyst, without any further treatment. A high hydrogenation efficiency was achieved as demonstrated by different techniques including DSC, and 1H NMR and FT‐IR spectroscopy. The hydrogenation process could be carried out without detrimental effect on particle size and colloidal stability as evidenced by optical microscopy and light scattering analysis.
Optical microscopy photograph of a polybutadiene‐based dispersion after hydrogenation. No change in size is observed. 相似文献
Summary: Fabrication of honeycomb‐patterned films from amphiphilic dendronized block copolymer (PEO113‐b‐PDMA82) by ‘on‐solid surface spreading’ and ‘on‐water spreading’ method is reported. Highly ordered honeycomb films with quasi‐horizontally paralleled double‐layered structure can be fabricated by the on‐solid surface spreading method. This work raises the possibility that such structures can be formed in amphiphilic dendronized block copolymers and extends the family of source materials.
Summary: Fluorescent images that illustrate acid‐catalyzed tert‐butoxycarbonyl (tBoc) deprotection patterns in polymer films were obtained using fluorescent sensors based on 7‐hydroxycoumarin dyes. Three commercial 7‐hydroxycoumarins, which are highly fluorescent, become practically nonemissive upon protection of the 7‐hydroxyl position with tBoc. In thin polymer films, the protected “prefluorescent” probes can return to their deprotected, fluorescent states by reaction with catalytic amounts of photogenerated acid and mild heating.
Protected probes become highly fluorescent after acid‐induced deprotection. 相似文献
Water‐soluble single‐ and multi‐walled carbon nanotubes (CNTs) were prepared by grafting polyacrylamide chains from the graphitic surface via ceric ion‐induced redox radical polymerization. The reducing functionalities were covalently attached to the tubes by peroxide‐assisted radical reaction. The results showed that polymer chains were grafted onto CNTs by the redox process. The redox radical polymerization initiated by carbon nanotube‐bearing functionalities not only provides a powerful strategy for modifying the carbon nanostructures but also gives us the knowledge of their sidewall chemistry.
Ring‐opening metathesis polymerization (ROMP) was used for the synthesis of monolithic capillary columns with inner diameters of 200 µm. The resulting polymeric monoliths were characterized by inverse size‐exclusion chromatography (ISEC). Surface functionalization was carried out in situ using 2‐(N,N‐dimethylaminoethyl)norborn‐5‐ene‐2‐ylcarboxylic amide ( 1 ). The resulting functionalized monoliths were successfully used in anion‐exchange chromatography of oligodeoxynucleotides.
