Photoresponsive Gels Prepared by Ring‐Opening Metathesis Polymerization

This communication describes photoresponsive gels, prepared using ring‐opening metathesis polymerization (ROMP), that dissolve upon irradiation with ultraviolet light. Exposure of mixtures of norbornene‐type ROMP monomers and new photoreactive cross‐linkers comprising two norbornene units bound through a chain containing o‐nitrobenzyl esters (NBEs) to well‐known ruthenium carbene catalysts gave cross‐linked polymer networks that swelled in organic solvents or water depending on the structure of the monomer. These gels became homogeneous upon irradiation with UV light, consistent with breaking of the cross‐links through photolysis of the NBE groups. The irradiation time required for homogenization of the gels depended on the cross‐link density and the structure of the photoresponsive cross‐linker.

     

Ring‐Opening Metathesis Polymerization Based Post‐Synthesis Functionalization of Electron Beam Curing Derived Monolithic Media

Monolithic materials were prepared via electron‐beam curing from ethyl methacrylate, trimethylolpropane triacrylate, and norborn‐5‐ene‐2‐ylmethyl acrylate. Reaction of the norborn‐2‐ene groups with either RuCl₂(PCy₃)₂(CHPh) ( 1 ) or RuCl₂(PCy₃)(1,3‐dimesityl‐4,5‐dihydroimidazol‐2‐inylidene)(CHPh) ( 2 ) resulted in the surface attachment of the initiators. The extent of initiator immobilization was found to be substantially higher for 1 than for 2 . Reaction of the surface immobilized initiators with various monomers resulted in the desired surface modification of EB‐derived monoliths. The amounts of grafted monomer were determined by elemental analysis and ICP‐OES.

     

Novel Highly Active Niobium Catalysts for Ring Opening Metathesis Polymerization of Norbornene

Ring‐opening metathesis polymerization (ROMP) of norbornene catalyzed by niobium(V) N,N‐dialkylcarbamates Nb(O₂CNR₂)₅, R = Et ( 1 ), Me ( 2 ) was studied in the presence of methylaluminoxane (MAO) as a cocatalyst. These novel catalytic systems resulted very active in chlorobenzene: 1 in the presence of methylaluminoxane catalyzes the ROMP of norbornene with the highest activity (29 000 kg of polymer/mol of catalyst × hour) never reported up to now for niobium catalysts. The high productivity appears particularly attractive considering that these precursors are rather cheap and easy to synthesize and to handle. Polynorbornenes were characterized by FT‐IR and NMR spectroscopies and by DSC calorimetry. A new FT‐IR method for the swift determination of the cis/trans content of the polymer is presented.

     

A Precision Ethylene‐Styrene Copolymer with High Styrene Content from Ring‐Opening Metathesis Polymerization of 4‐Phenylcyclopentene

Ring‐opening metathesis polymerization of 4‐phenylcyclopentene is investigated for the first time under various conditions. Thermodynamic analysis reveals a polymerization enthalpy and entropy sufficient for high molar mass and conversions at lower temperatures. In one example, neat polymerization using Hoveyda–Grubbs second generation catalyst at −15 °C yields 81% conversion to poly(4‐phenylcyclopentene) (P4PCP) with a number average molar mass of 151 kg mol⁻¹ and dispersity of 1.77. Quantitative homogeneous hydrogenation of P4PCP results in a precision ethylene‐styrene copolymer (H₂‐P4PCP) with a phenyl branch at every fifth carbon along the backbone. This equates to a perfectly alternating trimethylene‐styrene sequence with 71.2% w/w styrene content that is inaccessible through molecular catalyst copolymerization strategies. Differential scanning calorimetry confirms P4PCP and H₂‐P4PCP are amorphous materials with similar glass transition temperatures (T_g) of 17 ± 2 °C. Both materials present well‐defined styrenic analogs for application in specialty materials or composites where lower softening temperatures may be desired.

     

Oxidation‐Triggered Ring‐Opening Metathesis Polymerization

Eight new N‐Hoveyda‐type complexes were synthesized in yields of 67–92 % through reaction of [RuCl₂(NHC)(Ind)(py)] (NHC=1,3‐bis(2,4,6‐trimethylphenylimidazolin)‐2‐ylidene (SIMes) or 1,3‐bis(2,6‐diisopropylphenylimidazolin)‐2‐ylidene (SIPr), Ind=3‐phenylindenylid‐1‐ene, py=pyridine) with various 1‐ or 1,2‐substituted ferrocene compounds with vinyl and amine or imine substituents. The redox potentials of the respective complexes were determined; in all complexes an iron‐centered oxidation reaction occurs at potentials close to E=+0.5 V. The crystal structures of the reduced and of the respective oxidized Hoveyda‐type complexes were determined and show that the oxidation of the ferrocene unit has little effect on the ruthenium environment. Two of the eight new complexes were found to be switchable catalysts, in that the reduced form is inactive in the ring‐opening metathesis polymerization of cis‐cyclooctene (COE), whereas the oxidized complexes produce polyCOE. The other complexes are not switchable catalysts and are either inactive or active in both reduced and oxidized states.     

Phenylenevinylene Block Copolymers via Ring‐Opening Metathesis Polymerization

Fully conjugated block copolymers containing 1,4‐ and 1,3‐phenylenevinylene repeating units can be prepared by the sequential ring opening metathesis polymerization of strained cyclophanedienes, initiated by ruthenium carbene complexes (Grubbs metathesis catalysts). The molecular weight of the constituent blocks can be tightly controlled by changing the catalyst to monomer ratio and the volume fraction of the block copolymers independently tailored by the ratio of the monomers employed. Extensive phase separation between the constituent blocks is observed in thin films of these polymers by atomic force microscopy and efficient energy transfer between blocks containing 1,4‐ and 1,3‐phenylenevinylene units can be seen in the photoluminescence of these materials.

     

Tandem Ring‐Opening Metathesis – Vinyl Insertion Polymerization: Fundamentals and Application to Functional Polyolefins

The accomplishments in the copolymerization of ethylene with cyclic olefins such as norborn‐2‐ene or cis‐cyclooctene via tandem ring‐opening metathesis polymerization (ROMP) – vinyl insertion polymerization (VIP) are outlined. This approach provides polyolefins with high molecular weight (600,000 < M_n < 4,500,000 g mol⁻¹) and substantial amounts of double bonds along the polymer main chain. Olefinic moieties in ROMP‐derived polymers can be converted into hydroxyl, amino, silyl, ester, or carboxylate groups by different means including controlled radical polymerization‐based grafting. The underlying concept for the switch in polymerization mechanism, the resulting pre‐catalyst requirements, limitations and challenges and the chemistry developed for functionalizing unsaturated polymers are outlined in detail.

     

Cysteine‐Functional Polymers via Thiol‐ene Conjugation

A thiofunctional thiazolidine is introduced as a new low‐molar‐mass building block for the introduction of cysteine residues via a thiol‐ene reaction. Allyl‐functional polyglycidol (PG) is used as a model polymer to demonstrate polymer‐analogue functionalization through reaction with the unsaturated side‐chains. A modified trinitrobenzenesulfonic acid (TNBSA) assay is used for the redox‐insensitive quantification and a precise final cysteine content can be predetermined at the polymerization stage. Native chemical ligation at cysteine‐functional PG is performed as a model reaction for a chemoselective peptide modification of this polymer. The three‐step synthesis of the thiofunctional thiazolidine reactant, together with the standard thiol‐ene coupling and the robust quantification assay, broadens the toolbox for thiol‐ene chemistry and offers a generic and straightforward approach to cysteine‐functional materials.

     

Effect of Cocatalysts on the Catalytic Activities of Tantalum‐ and Niobium‐Based Catalysts for Ring‐Opening Metathesis Polymerization of Norbornene

A series of pentavalent tantalum and niobium complexes with aryloxy ligands was prepared, and their catalytic behavior for the ROMP of norbornene was studied in the presence of an alkylaluminum cocatalyst. Tantalum complexes 1 – 4 showed very high activity for the ROMP of NBE in combination with ⁱBu₃Al to give high‐molecular‐weight polymers. In contrast, the niobium complexes 5 and 6 , as well as NbCl₅, exhibited very high activity upon activation with Me₃Al to give high‐molecular‐weight polymers.

     

Surface‐Functionalized,Ring‐Opening Metathesis Polymerization‐Derived Monoliths for Anion‐Exchange Chromatography

Ring‐opening metathesis polymerization (ROMP) was used for the synthesis of monolithic capillary columns with inner diameters of 200 µm. The resulting polymeric monoliths were characterized by inverse size‐exclusion chromatography (ISEC). Surface functionalization was carried out in situ using 2‐(N,N‐dimethylaminoethyl)norborn‐5‐ene‐2‐ylcarboxylic amide ( 1 ). The resulting functionalized monoliths were successfully used in anion‐exchange chromatography of oligodeoxynucleotides.

     

Latent Olefin Metathesis Catalysts for Polymerization of DCPD

Summary: Advances in design of latent ruthenium phenylindenylidene catalysts bearing salicylaldimine ligands for ring-opening metathesis polymerization are described. The presence of the substituents in ortho position in N-aryl ring of salicylaldimine ligand has been found to be the main factor determining the catalyst stability. The best of the studied catalysts after acid activation offers activity comparable to that of the dichloride systems in ring-opening metathesis polymerization of DCPD, while maintaining very high stability in the monomer solution.     

Antimicrobial Polymers Prepared by Ring‐Opening Metathesis Polymerization: Manipulating Antimicrobial Properties by Organic Counterion and Charge Density Variation

The synthesis and characterization of a series of poly(oxanorbornene)‐based synthetic mimics of antimicrobial peptides (SMAMPs) is presented. In the first part, the effect of different organic counterions on the antimicrobial properties of the SMAMPs was investigated. Unexpectedly, adding hydrophobicity by complete anion exchange did not increase the SMAMPs’ antimicrobial activity. It was found by dye‐leakage studies that this was due to the loss of membrane activity of these polymers caused by the formation of tight ion pairs between the organic counterions and the polymer backbone. In the second part, the effect of molecular charge density on the biological properties of a SMAMP was investigated. The results suggest that, above a certain charge threshold, neither minimum inhibitory concentration (MIC₉₀) nor hemolytic activity (HC₅₀) is greatly affected by adding more cationic groups to the molecule. A SMAMP with an MIC₉₀ of 4 μg mL^?1 against Staphylococcus aureus and a selectivity (=HC₅₀/MIC₉₀) of 650 was discovered, the most selective SMAMP to date.     

Preparation of Reactive Three‐Dimensional Microstructures via Direct Laser Writing and Thiol‐ene Chemistry

Three‐dimensional microstructures are fabricated employing the direct laser writing process and radical thiol‐ene polymerization. The resin system consists of a two‐photon photoinitiator and multifunctional thiols and olefins. Woodpile photonic crystals with 22 layers and a rod distance of 2 μm are fabricated. The structures are characterized via scanning electron microscopy and focused ion beam milling. The thiol‐ene polymerization during fabrication is verified via infrared spectroscopy. The structures are grafted in a subsequent thiol‐Michael addition reaction with different functional maleimides. The success of the grafting reaction is evaluated via laser scanning microscopy and X‐ray photoelectron spectroscopy. The grafting density is calculated to be close to 200 molecules μm⁻².     

One‐Step Ring Opening Metathesis Block‐Like Copolymers and their Compositional Analysis by a Novel Retardation Technique

Using a one‐step synthetic route for block copolymers avoids the repeated addition of monomers to the polymerization mixture, which can easily lead to contamination and, therefore, to the unwanted termination of chain growth. For this purpose, monomers ( M1 – M5 ) with different steric hindrances and different propagation rates are explored. Copolymerization of M1 (propagating rapidly) with M2 (propagating slowly), M1 with M3 (propagating extremely slowly) and M4 (propagating rapidly) with M5 (propagating slowly) yielded diblock‐like copolymers using Grubbs’ first ( G1 ) or third generation catalyst ( G3 ). The monomer consumption was followed by ¹H NMR spectroscopy, which revealed vastly different reactivity ratios for M1 and M2 . In the case of M1 and M3 , we observed the highest difference in reactivity ratios (r₁=324 and r₂=0.003) ever reported for a copolymerization method. A triblock‐like copolymer was also synthesized using G3 by first allowing the consumption of the mixture of M1 and M2 and then adding M1 again. In addition, in order to measure the fast reaction rates of the G3 catalyst with M1 , we report a novel retardation technique based on an unusual reversible G3 Fischer‐carbene to G3 benzylidene/alkylidene transformation.     

Synthesis of polybenzoxazine precursors using thiols: Simultaneous thiol–ene and ring‐opening reactions

A new class of polybenzoxazine precursors of combined molecular structure of benzoxazine in the open and ring form has been developed. Thermally curable benzoxazine networks were obtained by simultaneous photoinduced thiol‐ene and Catalytic Opening of the Lateral Benzoxazine Rings by Thiols (COLBERT). The thiol‐ene reactions were initiated by photolysis of a free radical photoinitiator, 2, 2‐dimethoxy‐2‐phenyl acetophenone (DMPA), and the competing COLBERT reaction was triggered by thiol compound, 1,2‐ethanedithiol, present in the reaction mixture. The extent of reactions was evaluated by conducting experiments both under UV irradiation and in dark using model benzoxazines. The precursor soft films (pre‐P(B‐ala‐DTE)) were prepared by irradiating solutions of diallyl functional benzoxazine (B‐ala), 1,2‐ethanedithiol and DMPA. The obtained pre‐P(B‐ala‐DTE) films were then cured through thermally activated ring opening reaction of remaining benzoxazine groups yielding a more rigid and tough film. Thermal and mechanical properties of the films were investigated by DSC, DMA and TGA and compared with a typical polybenzoxazine, P(B‐ala). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Reactive Polymer Coatings: A General Route to Thiol‐ene and Thiol‐yne Click Reactions

Reactive polymer coatings were synthesized via chemical vapor deposition (CVD) polymerization process. These coatings decouple surface design from bulk properties of underlying materials and provide a facile and general route to support thiol‐ene and thiol‐yne reactions on a variety of substrate materials. Through the reported technique, surface functions can be activated through a simple design of thiol‐terminated molecules such as polyethylene glycols (PEGs) or peptides (GRGDYC), and the according biological functions were demonstrated in controlled and low‐fouling protein adsorptions as well as accurately manipulated cell attachments.     

Fatty Acid Derived Monomers and Related Polymers Via Thiol‐ene (Click) Additions

Thiol‐ene additions of methyl 10‐undecenoate, a castor oil derived renewable platform chemical, were studied with the goal of preparing a set of renewable monomers. Good to excellent yields were obtained for these solvent and initiator free thiol‐ene additions. The resulting monomers were then polymerized using TBD as a catalyst, to linear as well as hyperbranched polyesters that also contain thio‐ether linkages. All thus prepared polymers were fully characterized (NMR, GPC, DSC, and TGA) and the results of these investigations will be discussed within this contribution. The thermal analysis of these polymers revealed melting points in the range from 50 to 71 °C. Moreover, no significant weight loss was observed below 300 °C.

     

Sequential Electrografting and Ring‐Opening Metathesis Polymerization: a Strategy for the Tailoring of Conductive Surfaces

Summary: An electrografting technique has been combined with ring‐opening metathesis polymerization (ROMP). Poly(allyl methacrylate) chains have been chemisorbed onto steel and carbon plates under an appropriate cathodic potential in N,N‐dimethylformamide. The allyl moieties have been converted into Ru catalysts active in ROMP of norbornene and its derivatives. Initiation of ROMP from the surface is an efficient strategy to prepare strongly adhering coatings of tunable thickness and hydrophilic/hydrophobic balance, depending on the norbornene derivative polymerized at the surface.

The hydrophobicity of the polymer coating may be controlled by hydrolysis of the polynorbornene derivative.