In‐Situ Polymerization at the Interface of Micelles: A Novel Method to Control Functionality and Morphology

A new method to control the morphology and functionality of micelles is reported. Triblock copolymer micelles with atom transfer radical polymerization initiators at the interface are prepared in aqueous solution. After in‐situ polymerization at the interface, the structures of the interface and corona change, and micelles with PDMAEMA‐PEG comb–coil coronal chains are obtained. In aqueous solution, the pH exerts an influence on the morphology of the micelles. The coronal chains adopt different conformations at different pH values. Upon drying, the two coronal chains phase separate and form nanometer‐sized domains.

     

Encapsulation of Bovine Serum Albumin in Temperature‐Programmed “Shell‐in‐Shell” Structures

A novel approach to load a hydrophilic bovine serum albumin into drug carriers was proposed in terms of temperature‐programmed “shell‐in‐shell” structures, which were fabricated with poly(N‐isopropylacrylamide), poly(lactide), poly(ethylene glycol), and Au nanoparticles. Spherically well‐defined “shell‐in‐shell” structures were constructed by a modified‐double‐emulsion method (MDEM). The lower critical solubility temperature of the structures was manipulated to 36.4 °C which was confirmed by UV/Vis spectroscopy and DSC (Differential Scanning Calorimetry).

TEM image of the Au@PLLA‐PEG@PNIPAAm‐PDLA structure.     

Copolymerization of Ethylene and 10‐Undecen‐1‐ol using a Montmorillonite‐Intercalated Metallocene Catalyst: Synthesis of Polyethylene/Montmorillonite Nanocomposites with Enhanced Structural Stability

Summary: Ethylene and 10‐undecen‐1‐ol have been successfully copolymerized by an organically modified montmorillonite (OMMT)‐intercalated metallocene catalyst, Et[Ind]₂ZrCl₂, activated by methylaluminoxane (MAO). The obtained hydroxy‐functionalized polyethylene (PE‐OH)/OMMT nanocomposites exhibit enhanced structural stability as compared with the neat PE‐based ones, with no significant collapse of the nanocomposite structure being detected by WAXD examination after high‐temperature processing. The simultaneous polyolefin functionalization provides an effective and convenient solution to stabilize the PE/MMT nanocomposite structure formed by in‐situ polymerization.

     

One‐Component Bimolecular Photoinitiating Systems, 2

The compounds 2‐thioxanthone‐thioacetic acid and 2‐(carboxymethoxy)thioxanthone, bimolecular photoinitiators for free radical polymerization, are synthesized and characterized. Their capability to act as initiators for the polymerization of methyl methacrylate was examined. The postulated mechanism is based on the intermolecular electron‐transfer reaction of the excited photoinitiator with the sulfur or oxygen atom of the ground state of the respective photoinitiator followed by decarboxylation. The resulting alkyl radicals initiate the polymerization.

Structures of the photoinitiators.     

Facile Synthesis of Double‐Shelled Polypyrrole Hollow Particles with a Structure Similar to That of a Thermal Bottle

Polystyrene (PS) hollow spheres containing a hole on the surface were used as templates to fabricate double‐shelled polypyrrole (PPy) hollow particles with a unique structure similar to that of a thermal bottle. Thanks to the hole on the surface, the monomer and initiator could easily and quickly diffuse into the interior of the PS hollow sphere to generate uniform PPy coatings on both the inner and outer surfaces of the hollow template. When the PS template was selectively removed with tetrahydrofuran, we obtained a double‐shelled hollow particle with a structure resembling that of a thermal bottle. We also demonstrated that the morphology and porosity of the resultant PPy coatings could be manipulated and fine‐tuned by adjusting at least three parameters: the concentration of monomer, the polymerization time, and the addition of poly(vinyl pyrrolidone).

     

Precision Polyolefin Nanoalloy Polypropylene/Poly(ε‐caprolactone)

This communication reports the first example of precision polyolefin nanoalloys where an exotic immiscible polymer is nanometrically dispersed with stability in a polyolefin matrix in a highly controlled mode. Following the preparation of polypropylene/multiwalled carbon nanotubes nanocomposites (PP/MWCNTs) by in situ Ziegler‐Natta polymerization, the hydroxyl groups on the surfaces of individual MWCNTs are used to initiate ring‐opening polymerization of ε‐caprolactone, resulting in PP/poly(ε‐caprolactone) (PCL) alloy with PCL grafted on MWCNTs. Upon phase formation, the PP/MWCNTs‐g‐PCL alloys exhibit a unique PCL dispersion morphology, which is stable and solely governed by PCL molecular weight.

     

New Quenching Procedure for Preservation of Initial Polymer/Catalyst Particle Morphology in Ziegler–Natta Olefin Polymerization

Preservation of initial polymer/catalyst particle morphology under air, was examined using stopped‐flow Ziegler–Natta polymerization with various quenching conditions and post‐chemical treatments. The exposure of the initial particles to air caused the fast formation of cracks on the surface, finally leading to significant reformation of the particle shape, when polymerizing particles were washed with heptane at ?65 °C under N₂ or under CO₂. On the other hand, when the particles were washed with heptane containing an appropriate amount of tetrahydrofuran under CO₂, the particle morphology under air was almost completely maintained even after 1 h exposure. The present results are useful for various ex situ characterizations of unstable initial polymer/catalyst particles.

     

A Rapid Quenched‐Flow Device for the Characterisation of the Nascent Polymerisation of Ethylene under Industrial Conditions

Summary: A quenched‐flow reactor is introduced as an effective means for the production of polyolefin particles with precisely controlled reaction times as low as 40 ms. The use of off‐line scanning electron microscopy and induced‐coupled plasma yields experimental data on the development of the kinetics and morphology of nascent structures during the polymerisation of ethylene on a heterogeneous TiCl₄ MgCl₂ Ziegler–Natta catalyst. Initial ex situ observations revealed the development of specific morphologies very early during the reaction (e.g., cracks in platelike surfaces, fines, extrudates, etc.) that can potentially lead to fines, and the kinetic analysis showed extremely high reaction rates at very short times.

Scanning electron micrograph of a network of fibrils formed by the deformation of the surface of a particle due to the generation of internal forces.     

A Strategy for Synthesis of Ion‐Bonded Supramolecular Star Polymers by Reversible Addition‐Fragmentation Chain Transfer (RAFT) Polymerization

We have developed a novel strategy for the preparation of ion‐bonded supramolecular star polymers by RAFT polymerization. An ion‐bonded star supramolecule with six functional groups was prepared from a triphenylene derivative containing tertiary amino groups and trithiocarbonate carboxylic acid, and used as the RAFT agent in polymerizations of tert‐butyl acrylate (tBA) and styrene (St). Molecular weights and structures of the polymers were characterized by ¹H NMR and GPC. The results show that the polymerization possesses the character of living free‐radical polymerization and the ion‐bonded supramolecular star polymers PSt, PtBA, and PSt‐b‐PtBA, with six well‐defined arms, were successfully synthesized.

     

Synthesis of Silver Nanoparticles Using a Novel Graft Copolymer and Enhanced Particle Stability via a “Polymer Brush Effect”

Polymer‐encapsulated silver nanoparticles were synthesized and sterically stabilized by a new core‐shell type system consisting of poly(S‐alt‐MA)‐graft‐PMMA copolymer that acts as a scaffold for the synthesis of size confined nanoparticles. The graft copolymer is synthesized via ambient temperature ATRP using the CuBr/PMDETA catalytic system at ambient temperature. The graft copolymer is hypothesized to function as a scaffold with the anhydride part interacting strongly with the silver ions, while the PMMA graft functions as a polymer brush that stabilizes the dispersion and prevents the particle aggregation due to a ‘polymer brush effect’. UV absorption and TEM studies confirm that the synthesized silver composite particles have a core‐shell structure.

     

Synthesis of Polyaniline‐Vanadium Oxide Nanocomposite Nanosheets

Summary: Polyaniline‐vanadium oxide nanocomposite nanosheets with thickness between 10 and 20 nm, and lateral dimensions in the range of hundreds of nanometers to several microns have been synthesized by in situ intercalation polymerization of aniline with layered V₂O₅ under hydrothermal conditions. The product was characterized by field‐emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT‐IR) spectroscopy, and X‐ray diffractometer (XRD). The effects of the concentration of aniline and reaction temperature on the morphologies of polyaniline‐vanadium oxide nanocomposites have also been investigated.

SEM image of tremella‐like polyaniline‐vanadium oxide nanocomposite nanosheets.     

Collapse of Cylindrical Brushes with 2‐Isopropyloxazoline Side Chains Close to the Phase Boundary

A high‐molar‐mass cylindrical brush polymer with a main chain degree of polymerization of P_w = 1047 is synthesized by free‐radical polymerization of a poly‐2‐isopropyloxazoline macromonomer with P_n = 28. The polymerization is conducted above the lower phase transition temperature of the macromonomer, i.e., in the phase‐separated regime, which provides a sufficiently concentrated macromonomer phase mandatory to obtain high‐molar‐mass cylindrical brushes. Upon heating to the phase transition temperature, the hydrodynamic radius is observed to shrink from 34 to 27 nm. Further increase in temperature resulted in aggregated chains which were observed to coexist with single chains until eventually only aggregates of μm size were detectable.

     

Synthesis of a Multi Alternating‐Arm‐Containing Dendritic Star Copolymer by RAFT and Cationic Ring‐Opening Polymerization

A new dendritic heteroarm star copolymer that contains multi‐alternating arms of poly(ethylene oxide‐tetrahydrofuran) (P(EO‐THF)) and poly(methyl methacrylate) (PMMA) on a dendritic polyester core has been synthesized by a ‘core‐first’ approach by combination of sequential cationic ring‐opening polymerization (CROP) and reversible addition–fragmentation transfer (RAFT) polymerization initiated by a dendritic macroinitiator ( 3 ) capped with multi‐alternating terminal carboxylic acid groups (used directly to initiate the ROP of THF in the presence of EO as a polymerization promoter to attain P(EO‐THF) arms) and dithiobenzoate groups (used to initiate RAFT polymerization of MMA to attain PMMA arms). The structures of the products were confirmed by NMR spectroscopy, GPC‐MALLS, and DSC measurements.

     

Two Methods to Generate Multiple Compositions in Combinatorial Ink‐Jet Printing of Ceramics

Summary: Combinatorial exploration of material compositions and associated informatics having influenced medicinal chemistry are now transforming the material sciences. In ceramic science, both thin and thick film combinatorial techniques are available. Ink‐jet printing provides a pathway to the latter. Mixing behind the nozzle and in front of the nozzle in well plates is described here. Such instruments are described and compared, and compositional calibration details for both are given.

Calibration library printed from a ceramic ternary system.     

Existence of Two Different Isotropic Phases as a Reason for Bistable Phase Behavior of an LC Side‐Chain Polymethacrylate

An isotropic melt of a chiral side‐chain polymethacrylate was studied by electric birefringence technique. A phase transition between two different isotropic phases was detected by Kerr effect and confirmed by WAXS measurements. The obtained experimental data can explain the previously reported bistable phase behavior of the polymer, as conventional Sm A phase is formed in slow cooling whereas a TGB‐like, optically isotropic mesophase in fast cooling.

     

A Mechanochemical Approach to Nanocomposites Using Single‐Wall Carbon Nanotubes and Poly(L‐lysine)

A simple method to fabricate polymer nanocomposites with single‐walled carbon nanotubes is reported, in which the nanotubes were reacted with poly(L ‐lysine) by using high‐speed vibration milling. The nanocomposites obtained were characterized by Fourier transform infrared (FT‐IR), UV–Vis spectroscopy, and thermogravimetric methods. The morphology as well as the dispersion of the carbon nanotubes were determined by scanning and transmission electron microscopy.

     

Addition‐Fragmentation Chain Transfer Involving Dimers of α‐Methylvinyl Monomers Studied by ESR Spectroscopy: Competition between Fragmentation and Bimolecular Termination

Detection of the adduct radical by ESR spectroscopy and after‐effect ESR measurements of the adduct radical concentrations in the photosensitized polymerization of styrene (St) in the presence of dimers of α‐methylstyrene (MSD) and methyl methacrylate have revealed that the dominant mechanism of adduct radical loss changes from bimolecular termination to fragmentation as the temperature is increased beyond 90 °C for St/MSD.

     

High‐Performance Exfoliated Poly(propylene)/Clay Nanocomposites by In Situ Polymerization with a Novel Z–N/Clay Compound Catalyst

Highly exfoliated poly(propylene) (PP)/clay nanocomposites with obvious improvements in both the tensile strength and toughness have been prepared by a novel TiCl₄/MgCl₂/imidazolium‐modified montmorillonite (IOHMMT) compound catalysts. Through this approach, in situ propylene polymerization can actually take place between the silicate layers and lead not only to PP with a high isotacticity and molecular weight, but also to a highly exfoliated structure even at high clay content levels (as high as 19 wt.‐%).

     

Synthesis and Dispersion Characteristics of Multi‐Walled Carbon Nanotube Composites with Poly(methyl methacrylate) Prepared by In‐Situ Bulk Polymerization

Multi‐walled carbon nanotubes (MWNT) purified by acidic solution were processed with PMMA via an in‐situ polymerization. Experimental evidences indicate the role of radical initiator (AIBN) and MWNT, showing increases of polymerization rate and MWNT diameter. Induced radicals on the MWNT by AIBN were found to trigger the grafting of PMMA. Moreover, the solvent cast film showed a better nanoscopic dispersion of MWNT and possibilities of CNT composites in engineering applications.

Fractured surface of multi‐walled carbon nanotube composite with PMMA prepared by in‐situ bulk polymerization.