Glucose biosensor enhanced by nanoparticles

Glucose biosensors have been formed with glucose oxidase (GOD) immobilized in composite immobilization membrane matrix, which is composed of hydrophobic gold, or hydro-philic gold, or hydrophobic silica nanoparticles, or the combination of gold and silica nanoparticles, and polyvinyl butyral (PVB) by a sol-gel method. The experiments show that nanoparticles can significantly enhance the catalytic activity of the immobilization enzyme. The current response can be increased from tens of nanoamperometer (nA) to thousands of nanoamperometer to the same glucose concentration, and the electrodes respond very quickly, to about 1 min. The function of nanoparticles effect on immobilization enzyme has been discussed.     

Dual‐Amplification of Antigen–Antibody Interactions via Backfilling Gold Nanoparticles on (3‐Mercaptopropyl) Trimethoxysilane Sol‐Gel Functionalized Interface

A new dual‐amplification strategy of electrochemical signaling from antigen–antibody interactions was proposed via backfilling gold nanoparticles on (3‐mercaptopropyl) trimethoxysilane sol‐gel (MPTS) functionalized interface. The MPTS was employed not only as a building block for the electrode surface modification but also as a matrix for ligand functionalization with first amplification. The second signal amplification strategy introduced in this study was based on the backfilling immobilization of nanogold particles to the immunosensor surface. Several coupling techniques, such as with nanogold but not MPTS or with MPTS but not nanogold, were investigated for the determination of carcinoembryonic antigen (CEA) as a model, and a very good result was obtained with nanogold and MPTS coupling immunosensor. With the noncompetitive format, the formation of the antigen–antibody complex by a simple one‐step immunoreaction between the immobilized anti‐CEA and CEA in sample solution introduced membrane potential change before and after the antigen–antibody interaction. Under optimal conditions, the proposed immunosensor exhibited a good electrochemical behavior to CEA in a dynamic concentration range of 4.4 to 85.7 ng/mL with a detection limit of 1.2 ng/mL (at 3 δ). Moreover, the precision, reproducibility and stability of the as‐prepared immunosensor were acceptable. Importantly, the proposed methodology would be valuable for diagnosis and monitoring of carcinoma and its metastasis.     

Guanine/Ionic Liquid Derived Ordered Mesoporous Carbon Decorated with AuNPs as Efficient NADH Biosensor and Suitable Platform for Enzymes Immobilization and Biofuel Cell Design

Guanine‐ionic liquid derived ordered mesoporous carbon (GIOMC) decorated with gold nanoparticles was used as electrocatalyste for NADH oxidation and electrochemical platform for immobilization of glucose dehydrogenase (GDH) enzyme. The resulting GIOMC/AuNPs on the glassy carbon electrode can be used as novel redox‐mediator free for NADH sensing and this integrated system (GIOMC/AuNPs/GDH) shows excellent electrocatalytic activity toward glucose oxidation. Furthermore, the ionic liquid derived ordered mesoporous carbon derivate with Ph‐SO₃H (IOMC‐PhSO₃H) decorated with AuNPs has been developed to bilirubin oxidase enzyme (BOD) immobilization and the GC/IOMC‐PhSO₃H/BOD integrated system shows excellent bioelectrocatalytic activity toward oxygen reduction reaction. The proposed mesostructured platforms decorated by AuNPs have been developed to enhance mass transfer and charge transfer from biocatalyst to electrode, leading these bioanode and biocathode used for biofuel cell assembly. Integration designed bioanode and biocathode yielding a membrane‐less glucose/O₂ biofuel cell with power density of 33 (mW.cm⁻²) at 257 mV. The open circuit voltage of this biofuel cell and maximum produced current density were 508 mV and 0.252 (mA.cm⁻²) respectively.     

基于微机电系统技术和纳米金自组装膜的安培型免疫传感器研究

基于微机电系统(MEMS)技术制备安培型免疫传感器,并利用基于硫醇单层膜的纳米金单层膜自组装技术设计传感器界面,用于固定人免疫球蛋白(IgG)抗体,研制了一种新型的安培型免疫传感器。采用MEMS技术,在硅片上制备微型的三电极系统以及SU-8反应池。基于自组装技术,先在金电极上自组装巯基乙胺单层膜,利用膜上氨基与纳米金共价结合组装纳米金单层膜,得到可用于固定抗体的界面。实验探讨了影响抗体固定的主要实验参数和条件;考察了采用此固定化方法传感器的响应性能,与金电极直接吸附固定法和戊二醛共价交联固定法进行了比较。对IgG检测的实验结果表明,采用纳米金自组装膜固定抗体,具有活性高、非特异性吸附小、检测线性范围宽等优点。并且,基于MEMS技术的安培型免疫传感器具有微型化、与集成电路工艺相兼容、易于实现传感器的阵列化和实时多参数检测等优点。     

Glucose oxidase as a blocking agent-based signal amplification strategy for the fabrication of label-free amperometric immunosensors

An effective electrochemical signal amplification strategy based on enzyme membrane modification and redox probe immobilization was proposed to construct an amperometric immunosensor.L-cysteine@ferrocene functionalized chitosan,which possessed not only efficient redox-activity but also excellent film-forming ability,was coated on the bare glass carbon electrode. Moreover,the thiol groups(SH)in the ferrocenyl compound were used for gold nanoparticles immobilization via the strong bonding interaction,which co...     

Hydrogen Peroxide Sensor Based on Horseradish Peroxidase Combined with CaCO3 Microspheres and Gold Nanoparticles

Direct electrochemistry and electrocatalysis of horseradish peroxidase(HRP) were achieved by entrapping the enzyme between CaCO3 microspheres and gold nanoparticles through forming sandwich configuration (CaCO3-HRP-AuNPs). Polyanion, poly(styrene sulfonate)(PSS), was hybrid with CaCO3 microspheres to increase the surface negative charges for binding with HRP through electrostatic interaction. After the bioconjugate CaCO3 PSS-HRP was entrapped in chitosan based sol-gel(CS-GPTMS) film, HRP was encapsulated by in situ formation of an outer layer of AuNPs through electrochemical reduction of HAuCl4. The composite film containing AuNPs, CaCO3-PSS-HRP bioconjugates and CS-GPTMS can provide favorable microenvironment for HRP to perform direct electron transfer at glassy carbon electrode(GCE). HRP retained its bioelectrocatalytic activity and lead to sensitive and fast amperometric response for the determination of H2O2. H2O2 could be detected in a very wide linear range from 5.0×10–6 mol/L to 7.1×10–2 mol/L. The sandwich configuration of CaCO3-biomolecules-AuNPs could serve as a versatile platform for enzyme immobilization and biosensing.     

Rational nanoconjugation improves biocatalytic performance of enzymes: aldol addition catalyzed by immobilized rhamnulose-1-phosphate aldolase

Gold nanoparticles (AuNPs) are attractive materials for the immobilization of enzymes due to several advantages such as high enzyme loading, absence of internal diffusion limitations, and Brownian motion in solution, compared to the conventional immobilization onto porous macroscopic supports. The affinity of AuNPs to different groups present at the protein surface enables direct enzyme binding to the nanoparticle without the need of any coupling agent. Enzyme activity and stability appear to be improved when the biocatalyst is immobilized onto AuNPs. Rhamnulose-1-phosphate aldolase (RhuA) was selected as model enzyme for the immobilization onto AuNPs. The enzyme loading was characterized by four different techniques: surface plasmon resonance (SPR) shift and intensity, dynamic light scattering (DLS), and transmission electron microscopy (TEM). AuNPs-RhuA complexes were further applied as biocatalyst of the aldol addition reaction between dihydroxyacetone phosphate (DHAP) and (S)-Cbz-alaninal during two reaction cycles. In these conditions, an improved reaction yield and selectivity, together with a fourfold activity enhancement were observed, as compared to soluble RhuA.     

Nylon membrane formation in biocatalyst microencapsulation: physicochemical modelling

A simple model of nylon membrane formation was developed for enzyme or biological cell microencapsulation. The model which involves physicochemical effects was shown to be useful for optimizing membrane formation and maintaining high activity of the encapsulated biocatalyst. Simulations were conducted to define the effect of the determinant parameters (pH, solvent, temperature, diamine) on membrane characteristics and formation rate. The membrane thickness was shown to be independent of the microcapsule diameter (25-400 μm) when the pH is controlled during formulation (pH 9.5). At pH levels less than 9.5 and hexanediamine concentrations less than 200 mM, thin membranes resulted and pH values dropped considerably during formulation. The use of an acidic buffer and a diamine with lower dissociation constant and higher solubility in the organic solvent, permitted nylon membrane formation at lower pH levels, potentially resulting in less inactivation of the biocatalyst during immobilization. The membrane thickness was seen to be strongly dependent on the solvent polarity, however the solvent selection is limited by the toxicity to the biocatalyst. Control of temperature was needed for reproducibility of the membrane thickness.     

Synthesis of hydroxyapatite crystals using amino acid-capped gold nanoparticles as a scaffold

Inorganic composites are of special interest for biomedical applications such as in dental and bone implants wherein the ability to modulate the morphology and size of the inorganic crystals is important. One interesting possibility to control the size of inorganic crystals is to grow them on nanoparticles. We report here the use of surface-modified gold nanoparticles as templates for the growth of hydroxyapatite crystals. Crystal growth is promoted by a monolayer of aspartic acid bound to the surface of the gold nanoparticles; the carboxylate ions in aspartic acid are excellent binging sites for Ca(2+) ions. Isothermal titration calorimetry studies of Ca(2+) ion binding with aspartic acid-capped gold nanoparticles indicates that the process is entropically driven and that screening of the negative charge by the metal ions leads to their aggregation. The aggregates of gold nanoparticles are believed to be responsible for assembly of the platelike hydroxyapatite crystals into quasi-spherical superstructures. Control experiments using uncapped gold nanoparticles and pure aspartic acid indicate that the amino acid bound to the nanogold surface plays a key role in inducing and directing hydroxyapatite crystal growth.     

漆酶在纳米金溶胶/多重壁碳纳米管复合载体上固定方法的比较及粒子尺寸效应

以纳米金溶胶（NGS）和多重壁碳纳米管（MWCNTs）的共混物(NGS/MWCNTs)作为固定漆酶的载体,研究了3种固定漆酶方法在酶固定量、比活力上的差异。 研究了不同的固定方法对固定酶热稳定性和重复使用性及纳米金溶胶颗粒粒径对酶固定量和固定酶动力学参数的影响。 实验结果表明,NGS/MWCNTs具有良好的固定漆酶能力和高固酶比活力,NGS/MWCNTs（NGS粒径37 nm）通过简单物理吸附法固定漆酶的量和固酶的比活力最高,分别可达33.80 mg/g和9.433 U/mg。 在NGS-MWCNTs上采用化学键合方法固定的漆酶在70 ℃放置2 h后仍然保持初始活力的75％,重复使用20次后仍保持初始活力的70％。 纳米金溶胶粒子越小（24 nm）,底物和固定漆酶间亲和力越好（KM=0.027 mmol/L）,表观速率常数越大。     

In-situ synthesis of poly(dimethylsiloxane)-gold nanoparticles composite films and its application in microfluidic systems

We presented a simple approach for in-situ synthesis of poly(dimethylsiloxane) (PDMS)-gold nanoparticles composite film based on the special characteristics of PDMS itself. It is an environmentally safe synthesis method without the requirement of additional reducing/stabilizing agents. The region where the resulting gold nanoparticles distribute (in the matrix or on the surface of the polymer) and the size of the nanoparticles, as well as the colour of the free-standing films, can be simply controlled by adjusting the ratio of curing agent and the PDMS monomer. The chemical and optical properties of these composite films were studied. Using such a method, gold nanoparticle micropatterns on PDMS surfaces can be performed. And based on the gold nanoparticles micropattern, further modification with antibodies, antigens, enzymes and other biomolecules can be achieved. To verify this ability, an immobilized glucose oxidase (GOx) reactor in microchannels was built and its performance was studied. The experiments have shown that the resulting composite film may have a lot of potential merits in protein immobilization, immunoassays and other biochemical analysis on PDMS microchips.     

Supramolecular-mediated Immobilization of Trypsin on Cyclodextrin-modified Gold Nanospheres

Bovine pancreatic trypsin was immobilized on β- and γ-cyclodextrin coated gold nanospheres via supramolecular associations. The enzyme retained 100%–120% of its catalytic activity and its thermal stability at 50°C was 2–2.5 fold increased in the presence of the β- and γ-cyclodextrin modified metal nanoparticles, respectively. The influence of these immobilization processes on the conformational properties of the enzyme was studied by fluorescence spectroscopy. These results open a new perspective to the possible application of cyclodextrin-modified gold nanospheres as water-soluble carriers for enzyme immobilization.     

Fabrication and kinetic studies of a novel silver nanoparticles-glucose oxidase bioconjugate

In this study, a new effective, pH and thermally stable glucose oxidase (GOX)-silver nanoparticles (AgNPs) bioconjugate was designed. AgNPs were synthesized based on the reduction of silver nitrate (AgNO₃) by sodium borohydride (NaBH₄) using two simple procedures. Periodic acid was used for oxidation of the GOX and emission of Lucifer yellow (LyCH) was monitored by spectrofluorometer for evaluation of the oxidation properties of the GOX. The oxidized GOX (Ox-GOX) was immobilized on AgNPs by its sugar moieties via 6-aminohexanoic acid (6AHA) as linker. A sample of the synthesized bioconjugate was loaded on 7.5% non-denaturing polyacrylamide gel electrophoresis (PAGE) to confirm its structural and physical stability. The results from enzymatic activity assay showed that the bioconjugate, GOX and Ox-GOX were similar in stability and activity in acidic and basic pH (optimum pH = 7.0-8.0). Based on the results from thermal stability assay, it was found that the activity of the bioconjugate was found to be higher at lower temperatures. The V_max of the bioconjugate, GOX, and Ox-GOX was estimated as 28.6, 6.2, and 6 IU μg⁻¹ enzyme and the K_m was calculated as 2.7, 9, and 9.5 mM, respectively. It was found that the immobilization method improves the activity and stability of the GOX in different pH and temperatures. As a conclusion, the proposed method opens up the way to the development of a new bioconjugate with potential use in sensing, and many find potential applications in clinical diagnostics, medicine, and industries.     

Visualization of red-ox proteins on the gold surface using enzymatic polypyrrole formation

We describe a new method for the visualization of the activity of red-ox proteins on a gold interface. Glucose oxidase was selected as a model system. Surfaces were modified by adhesion of glucose oxidase on (a) electrochemically cleaned gold; (b) gold films modified with gold nanoparticles, (c) a gold surface modified with self-assembled monolayer, and (d) covalent immobilization of protein on the gold surface modified with a self-assembled monolayer. The simple optical method for the visualization of enzyme on the surfaces is based on the enzymatic formation of polypyrrole. The activity of the enzyme was quantified via enzymatic formation of polypyrrole, which was detected and investigated by quartz microbalance and amperometric techniques. The experimental data suggest that the enzymatic formation of the polymer may serve as a method to indicate the adhesion of active redox enzyme on such surfaces.

Oriented immobilization of antibodies and their fragments on modified silicon for the production of nanosensors

Different methods for the covalent immobilization of specific antibodies and their fragments on a silicon surface with the subsequent formation of immune complexes that consist of an immobilized monoclonal antibody, an antigen molecule, and a molecule of a second monoclonal antibody labeled with gold nanoparticles have been studied. Prostate-specific antigen (PSA), which is a molecular biomarker for prostate cancer, was used as an antigen. A covalent conjugate of the fragments of PSA-specific antibodies with gold nanoparticles has been obtained using the thiol groups of the antibodies. Scanning electron microscopy (SEM) was used for the registration of immune complexes on the surface. The high resolution of the method made it possible to detect individual immune complexes by the presence of gold nanoparticles and to calculate their number. A new method for the chemical modification of silicon by 3-aminopropyltrimetoxysilane (APTMS) and a bifunctional reagent 1,4-phenylene diisothiocyanate (PDITC) has been developed. This method provides a uniform distribution of antigen-binding centers and their availability for the formation of immune complexes. The developed immobilization method is promising for the formation of a biospecific biosensor layer based on silicon nanowires.     

Double‐Layer Nanogold and Double‐Strand DNA‐Modified Electrode for Electrochemical Immunoassay of Cancer Antigen 15‐3

Various sensor‐based immunoassay methods have been extensively developed for the detection of cancer antigen 15‐3 (CA 15‐3), but most often exhibit low detection signals and low detection sensitivity, and are unsuitable for routine use. The aim of this work is to develop a simple and sensitive electrochemical immunoassay for CA 15‐3 in human serum by using nanogold and DNA‐modified immunosensors. Prussian blue (PB), as a good mediator, was initially electrodeposited on a gold electrode surface, then double‐layer nanogold particles and double‐strand DNA (dsDNA) with the sandwich‐type architecture were constructed on the PB‐modified surface in turn, and then anti‐CA 15‐3 antibodies were adsorbed onto the surface of nanogold particles. The double‐layer nanogold particles provided a good microenvironment for the immobilization of biomolecules. The presence of dsDNA enhanced the surface coverage of protein, and improved the sensitivity of the immunosensor. The performance and factors influencing the performance of the immunosensor were evaluated. Under optimal conditions, the proposed immunosensor exhibited a wide linear range from 1.0 to 240 ng/mL with a relatively low detection limit of 0.6 ng/mL (S/N=3) towards CA 15‐3. The stability, reproducibility and precision of the as‐prepared immunosensor were acceptable. 57 serum specimens were assayed by the developed immunosensor and standard enzyme‐linked immunosorbent assay (ELISA), respectively, and the results obtained were almost consistent. More importantly, the proposed methodology could be further developed for the immobilization of other proteins and biocompounds.     

Gold nanoparticles in an ionic liquid phase supported in a biopolymeric matrix applied in the development of a rosmarinic acid biosensor

Gold nanoparticles dispersed in 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid (Au-BMI·PF(6)) were supported in chitin (CTN) chemically crosslinked with glyoxal and epichlorohydrin to obtain a new supported ionic liquid phase (SILP) catalyst with high catalytic activity, and providing an excellent environment for enzyme immobilization. This modified biopolymer matrix (Au-BMI·PF(6)-CTN) was used as a support for the immobilization of the enzyme peroxidase (PER) from pea (Pisum sativum), and employed to develop a new biosensor for rosmarinic acid (RA) determination in pharmaceutical samples by square-wave voltammetry. In the presence of hydrogen peroxide, the PER catalyzes the oxidation of RA to the corresponding o-quinone, which is electrochemically reduced at a potential of +0.14 V vs. Ag/AgCl. Under optimized conditions, the resulting peak current increased linearly for the RA concentration range of 0.50 to 23.70 μM with a detection limit of 70.09 nM. The biosensor demonstrated high sensitivity, good repeatability and reproducibility, and long-term stability (15% decrease in response over 120 days). The method was successfully applied to the determination of RA content in pharmaceutical samples, with recovery values being in the range of 98.3 to 106.2%. The efficient analytical performance of the proposed biosensor can be attributed to the effective immobilization of the PER enzyme in the modified CTN matrix, the significant contribution of the high conductivity of the ionic liquid, the facilitation of electron transfer promoted by gold nanoparticles, and the inherent catalytic ability of these materials.     

功能化纳米金增强的谷胱苷肽电化学检测和巯基识别

以冠有大量二茂铁的纳米金微粒/抗生蛋白链菌素结合物为标记物,将其标记于生物素修饰的巯基识别试剂上,制成了具有电化学活性和纳米金放大作用的传感器.首先将双官能团的羟基琥珀酰亚胺酯自组装于电极表面上,借助两步交联反应固定含巯基的蛋白质,并且引入巯基识别试剂标记生物素的马来酰亚胺,随后利用生物素与链霉抗生物素之间的特异性吸附作用,引入功能化的纳米金.采用伏安法测定修饰在纳米金上的二茂铁,可识别和测定表面固定的蛋白质,还原型谷胱苷肽在5μmol/L～0.1mmol/L浓度范围内存在线性关系,检测限可达到1nmol/L.     

Nickel-Impregnated Silica Nanoparticle Synthesis and Their Evaluation for Biocatalyst Immobilization

In the present investigation, impact of nickel-impregnated silica paramagnetic particles (NSP) as biocatalyst immobilization matrices was investigated. These nanoparticles were synthesized by sol–gel route using a nonionic surfactant block co polymer [poly (ethylene glycol)-block-poly-(propylene glycol)-block-poly (ethylene glycol)]. Diastase enzyme was immobilized on these particles (enzyme-impregnated NSP) as model enzyme and characterized using Fourier-transform infrared spectroscopy and X-ray crystallography. Analysis of enzyme-binding nature with these nanoparticles at different physiological conditions revealed that binding pattern and activity profile varied with the pH of the reaction mixture. The immobilized enzyme was further characterized for its biocatalytic activity with respect to kinetic properties such as Km and Vmax and compared with free enzyme. Paramagnetic nanoparticle-immobilized enzyme showed more affinity for substrate compared to free one. The nature of silica and nickel varied from amorphous to crystalline nature and vice versa upon immobilization of enzyme. To the best of our knowledge, this is the first report of its kind for change of nature from one form to other under normal temperatures upon diastase interaction with NSP.     

Facile electrocatalytic redox of hemoglobin by flower-like gold nanoparticles on boron-doped diamond surface

The flower-like gold nanoparticles together with spherical and convex polyhedron gold nanoparticles were fabricated on boron-doped diamond (BDD) surface by one-step and simple electrochemical method through easily controlling the applied potential and the concentration of HAuCl(4). The recorded X-ray diffraction (XRD) patterns confirmed that these three shapes of gold nanoparticles were dominated by different crystal facets. The cyclic voltammetric results indicated that the morphology of gold nanoparticles plays big role in their electrochemical behaviors. The direct electrochemistry of hemoglobin (Hb) was realized on all the three different shapes of nanogold-attached BDD surface without the aid of any electron mediator. In pH 4.5 acetate buffer solutions (ABS), Hb showed a pair of well defined and quasi-reversible redox peaks. However, the results obtained demonstrated that the redox peak potential, the average surface concentration of electroactive heme, and the electron transfer rates of Hb are greatly dependent upon the surface morphology of gold nanoparticles. The electron transfer rate constant of hemoglobin over flower-like nanogold/BDD electrode was more than two times higher than that over spherical and convex polyhedron nanogold. The observed differences may be ascribed to the difference in gold particle characteristics including surface roughness, exposed surface area, and crystal structure.