Colorimetric detection of cadmium in water using L-cysteine Functionalized gold–silver nanoparticles

Abstract

A new simple colorimetric assay was developed for the selective and sensitive detection of cadmium (II) in water samples using L-cysteine functionalized gold–silver nanoparticles. The gold–silver nanoparticles were synthesized by reducing HAuCl₄ and AgNO₃ in aqueous medium and were further functionalized with L-cysteine. The formation of homogeneous gold–silver nanoparticles was characterized by transmission electron microscopy, energy-dispersive X-ray spectroscopy, particle size distribution, and ultraviolet–visible absorption methods. In the presence of cadmium (II), the aggregation of functionalized gold–silver nanoparticles caused by the interaction between cadmium (II) and L-cysteine resulted in a naked-eye visible color change of L-cysteine functionalized gold–silver nanoparticles from orange–yellow to green, which can be monitored by a simple ultraviolet–visible spectrophotometer. Under the optimal conditions, the absorbance ratio at 600–435?nm (A₆₀₀/A₄₃₅) was linear to the concentration of cadmium (II) from 0.4 to 38.6?μM, and the limit of detection of cadmium (II) was 44?nM. Interference measurements showed that the method exhibited good selectivity. The proposed method was successfully applied to the determination of cadmium (II) in environmental water samples. The results indicated that this simple, selective, and sensitive sensing system has good potential for practical applications.     

Catalytic oxidation and determination of β-NADH using self-assembly hybrid of gold nanoparticles and graphene

A self-assembly hybrid of gold nanoparticles on graphene modified electrodes for low-potential NADH detection has been achieved. We used the natural polymer chitosan (Chit) to assist the stabilization of graphene in aqueous solution, and immobilize the electronegative Au nanoparticles (NPs) through electrostatic attraction. The synergy of Au NPs with graphene for catalytic oxidation of NADH made the overpotential ca. 220 mV less positive than that on the bare electrode, and remarkably increased the oxidation current. The amperometric sensors based on such modified electrodes for detection of NADH exhibited a good linearity from 1.5 to 320 μM, and showed high sensitivity with a low detection limit of 1.2 μM (S/N = 3). It could also exclude common interfering electroactive compounds like ascorbic acid and possessed good reproducibility and operational stability. Such eminent performance of the Au-RGO/Chit film together with the ability of graphene to significantly enhance the electron transfer between enzymes and the electrode suggested its promise for constructing novel graphene based dehydrogenase biosensors.     

Voltammetric determination of tumor necrosis factor-α based on the use of an aptamer and magnetic nanoparticles loaded with gold nanoparticles

Microchimica Acta - The authors are presenting an electrochemical aptasensor for tumor necrosis factor-alpha (TNF-α) detection that is aided by the use of magnetic nanoparticles (NPs) and two...     

Improving the fluorometric determination of the cancer biomarker 8-hydroxy-2′-deoxyguanosine by using a 3D DNA nanomachine

The authors describe a fluorometric method for improving the determination of the cancer biomarker 8-hydroxy-2′-deoxyguanosine (8-OHdG). A nicking endonuclease (NEase)-powered 3-D DNA nanomachine was constructed by assembling hundreds of carboxyfluorescein-labeled single strand oligonucleotides (acting as signal reporter) and tens of swing arms (acting as single-foot DNA walkers) on a gold nanoparticle (AuNP). The activity of this DNA nanomachine was controlled by introducing the protecting oligonucleotides. In the presence of aptamer against 8-OHdG, the protecting oligonucleotides are removed from the swing arms by toehold-mediated strand displacement reaction. In the next step, detached DNA walker hybridizes to the labelled DNA so that the DNA nanomachine becomes activated. Special sequences of signal reporter in the formed duplex can be recognized and cleaved by NEase. As a result, the DNA walker autonomously and progressively moves along the surface of the AuNP, thereby releasing hundreds of signal reporters and causing a rapid increase in green fluorescence. This 3-D nanomachine is highly efficient because one aptamer can release hundreds of signal reporters. These unique properties allowed for the construction of a DNA nanomachine-based method for sensitively detecting 8-OHdG in concentrations as low as 4 pM. This is three orders of magnitude lower compared to previously reported methods.

Open image in new window

Graphical abstract Schematic of a fluorometric method for determination of the cancer biomarker 8-hydroxy-2′-deoxyguanosine. A nicking endonuclease powered 3D-DNA nanomachine was used to improve the sensitivity. Limit of detection is three orders of magnitude lower than reported methods.

     

Quantitative determination of 8-hydroxy-2′-deoxyguanosine as a biomarker of oxidative stress in thalassemic patients using HPLC with an electrochemical detector

A simple and robust HPLC method with electrochemical detection was developed for the quantitative determination of 8-hydroxy-2′-deoxyguanosine (8-OHdG), a DNA damage product excreted in urine. Sample cleanup was carried out using solid-phase extraction (SPE) prior to chromatographic separation. 8-OHdG was well separated on an Eclipse XDB®-C18 column (150 × 4.6 mm i.d., 5 μm) with an Eclipse XDB®-C18 guard column (12 × 4.6 mm i.d., 5 μm). Two mobile phases containing methanol and 10 mM sodium formate (pH 4.5) at a ratio of 10: 90 and 50: 50 v/v, respectively, were used. The retention time of 8-OHdG was 9.8 ± 0.5 min. The recovery of 8-OHdG was found to be 97.2 ± 3.3% (n = 6). Intraday and interday precisions of the method were 4.0 ± 2.9% (n = 6) and 6.6 ± 1.7% (n = 6), respectively. The detection limit was 5 ng/mL. Preliminary investigation showed that the mean value of 8-OHdG, normalized with the amount of creatinine in the sample, from the thalassemic group was significantly higher than that from healthy subjects (211 ± 214 ng/mg creatinine vs. 31.4 ± 32.2 ng/mg creatinine, respectively), indicating oxidative stress.     

Sensitive colorimetric assays for α-glucosidase activity and inhibitor screening based on unmodified gold nanoparticles

A colorimetric sensor has been developed in this work to sensitively detect α-glucosidase activity and screen α-glucosidase inhibitors (AGIs) utilizing unmodified gold nanoparticles (AuNPs). The sensing strategy is based on triple-catalytic reaction triggered by α-glucosidase. In the presence of α-glucosidase, aggregation of AuNPs is prohibited due to the oxidation of cysteine to cystine in the system. However, with addition of AGIs, cysteine induced aggregation of AuNPs occurs. Thus, a new method for α-glucosidase activity detection and AGIs screening is developed by measuring the UV–vis absorption or visually distinguishing. A well linear relation is presented in a range of 0.0025–0.05 U mL⁻¹. The detection limit is found to be 0.001 U mL⁻¹ for α-glucosidase assay, which is one order of magnitude lower than other reports. The IC₅₀ values of four kinds of inhibitors observed with this method are in accordance with other reports. The using of unmodified AuNPs in this work avoids the complicated and time-consuming modification procedure. This simple and efficient colorimetric method can also be extended to other enzymes assays.     

Voltammetric determination of uric acid by using gold nanotubule electrode

Gold nanotubule membranes were prepared by using electroless deposition of gold within the pores and surfaces of polycarbonate track-etched membranes.And the gold nanotubule membrane was used as an electrode for determination of uric acid in urine samples for the first time.In Britton-Robinson buffer of pH 4.56,uric acid exhibited well-defined differential pulse voltammograms.And the interference between coexistent ascorbic acid and uric acid was overcome owing to the attractive ability of the gold nanotubule electrode to yield a large anodic peak difference ca.0.404 V(vs.SCE).The proposed method was then applied to the determination of uric acid in urine without any pretreatment.     

In vitro metabolism of 2′-ribose unmodified and modified phosphorothioate oligonucleotide therapeutics using liquid chromatography mass spectrometry

Antisense oligonucleotides (ASOs) have been touted as an emerging therapeutic class to treat genetic disorders and infections. The evaluation of metabolic stability of ASOs during biotransformation is critical due to concerns regarding drug safety. Because the effects of the modifications in ASOs on their metabolic stabilities are different from unmodified ASOs, studies that afford an understanding of these effects as well as propose proper methods to determine modified and unmodified ASO metabolites are imperative. An LC–tandem mass spectrometry method offering good selectivity with a high-quality separation using 30 mm N,N-dimethylcyclohexylamine and 100 mm 1,1,1,3,3,3-hexafluoro-2-propanol was utilized to identify each oligonucleotide metabolite. Subsequently, the method was successfully applied to a variety of in vitro systems including endo/exonuclease digestion, mouse liver homogenates, and then liver microsomes, after which the metabolic stability of unmodified versus modified ASOs was compared. Typical patterns of chain-shortened metabolites generated by mainly 3′-exonucleases were observed in phosphodiester and phosphorothioate ASOs, and endonuclease activity was identically observed in gapmers that showed relatively more resistance to nuclease degradation. Overall, the degradation of each ASO occurred more slowly corresponding to the degree of chemical modifications, while 5′-exonuclease activities were only observed in gapmers incubated in mouse liver homogenates. Our findings provide further understanding of the impact of modifications on the metabolic stability of ASOs, which facilitates the development of future ASO therapeutics.     

Separation of water-soluble vitamins on silica modified with L-cysteine–stabilized gold nanoparticles using HPLC

Silica functionalized with 3-aminopropyltriethoxysilane and L-cysteine–stabilized gold nanoparticles has been obtained (SiO₂–NH₂–Au–L-cysteine). The influence of pH and the content of acetonitrile in the mobile phase on retention and separation selectivity of eight vitamins has been studied. The chromatographic conditions that enable the separation of C, B3, B12, B5 and B1, B2, B6, B10 mixtures of vitamins have been proposed. It has been found that it is possible to separate a mixture of vitamins C, B3, B12, and B5 in 8 min, and a mixture of vitamins B1, B2, B6, B10 in 12 min on the synthesized sorbent SiO₂–NH₂–Au–L-cysteine in isocratic elution mode.     

A multifunctional probe based on the use of labeled aptamer and magnetic nanoparticles for fluorometric determination of adenosine 5’-triphosphate

A multifunctional fluorescent probe is synthesized for the determination of adenosine 5′-triphosphate (ATP). The 6-carboxyfluorescein-labeled aptamer (FAM-aptamer) was bound to the surface of magnetite nanoparticles coated with polydopamine (Fe₃O₄@PDA) by π-π stacking interaction to form the multifunctional probe. The probe has three functions including recognition, magnetic separation, and yielding a fluorescent signal. In the presence of ATP, FAM-aptamer on the surface of the probe binds to ATP and returns to the solution. Thus, the fluorescence of the supernatant is enhanced and can be related to the concentration of ATP. Fluorescence intensities were measured at excitation/emission wavelengths of 494/526 nm. Response is linear in the 0.1–100 μM ATP concentration range, and the detection limit is 89 nM. The probe was applied to the quantitation of ATP in spiked human urine and serum samples, with recoveries ranging between 94.8 and 102%.

Open image in new window

Graphical abstract A multifunctional fluorescent probe based on the use of FAM-aptamer and Fe₃O₄@PDA is described for the determination of ATP in spiked human urine and serum samples. FAM-aptamer: 6-carboxyfluorescein-labeled aptamer; Fe₃O₄@PDA: magnetite nanoparticles coated with polydopamine. ATP: adenosine 5′-triphosphate.

     

Electrooxidation and determination of some non-steroidal anti-inflammatory drugs on nanoparticles of Ni–curcumin-complex-modified electrode

The electrooxidation of several non-steroidal anti-inflammatory drugs (indomethacin, mefenamic acid, and diclofenac) was investigated on nanoparticles of Ni–curcumin-complex-modified glassy carbon (n-GC) electrode in alkaline solution. Surfaces studies were performed by scanning electron micrographs and atomic force microscopy. The oxidation process and its kinetics were studied using cyclic voltammetry and chronoamperometry techniques and also pseudo-steady-state polarization measurements. Voltammetric studies indicated that, in the presence of drugs, the anodic peak current of low-valence nickel species increases, followed by a decrease in the corresponding cathodic current. This pattern indicates that drugs were oxidized on the redox mediator immobilized on the electrode surface via an electrocatalytic mechanism. A mechanism based on the electrochemical generation of Ni(III)-active sites and their subsequent consumption by drugs was proposed. The rate constants of the catalytic oxidation of drugs and the electron-transfer coefficient are reported. A sensitive, simple, and time-saving amperometric procedure was developed for the analysis of these drugs in bulk form and for the direct assay of tablets, using the n-GC electrode.     

Molecularly imprinted monolith in-tube solid-phase microextraction coupled with HPLC/UV detection for determination of 8-hydroxy-2′-deoxyguanosine in urine

Urinary 8-hydroxy-2′-deoxyguanosine (8-OHdG) has been widely used as a biomarker of oxidative DNA damage. Measurements of 8-OHdG in urinary samples are challenging owing to the low level of 8-OHdG and the complex matrix. In this study, a novel molecularly imprinted polymer (MIP) monolithic column was synthesized with guanosine as a dummy template which was used as the medium for in-tube solid-phase microextraction (SPME). In-tube SPME coupled with HPLC/UV detection for extraction and determination of urinary 8-OHdG was developed. The synthesized MIP monolithic column exhibited high extraction efficiency owing to its greater phase ratio with convective mass transfer and inherent selectivity. The enrichment factor for 8-OHdG was found to be 76 and the limits of detection and quantification of the method for urinary samples were 3.2 nmol/L (signal-to-noise ratio 3) and 11 nmol/L (signal-to-noise ratio 10), respectively. The MIP^’s selectivity also made the sample preparation procedure and chromatographic separation much easier. The linear range of the proposed method was from 0.010 to 5.30 μmol/L (r = 0.9997), with a relative standard deviation of 1.1–6.8%, and the recovery for spiked urine samples was 84 ± 3%. The newly developed method was successfully applied to determine urinary samples of healthy volunteers, coking plant workers, and cancer patients. The 8-OHdG level in cancer patients was significantly higher than that in healthy people.     

Fast SPE and HPLC–DAD determination of brucine in human urine using multi-walled carbon nanotubes modified with magnetic nanoparticles

A nanomaterial comprising Fe₃O₄-modified hydroxylated multi-walled carbon nanotubes (Fe₃O₄–MWCNTs–OH) was prepared by a co-precipitation method. Combined with HPLC-photodiode array detector (DAD), Fe₃O₄–MWCNTs–OH was used to determine brucine in human urine. Some important parameters that could influence extraction efficiency of brucine were optimized, including the extraction time, amounts of Fe₃O₄–MWCNTs–OH, pH of sample solutions, desorption solvent and desorption time. Under the optimal conditions, the recoveries of brucine from spiked urine samples were between 93.1 and 104.1%, and the relative standard deviations (RSDs) ranged from 3.1 to 5.7%. The correlation coefficient was 0.9997. The limits of detection and quantification were 6 and 21 ng/mL at a signal-to-noise ratio of 3 and 10, respectively. The results indicated that Fe₃O₄–MWCNTs–OH combined with HPLC–DAD is a promising solid-phase extraction material for the sample pretreatment in the determination of brucine.     

Deposit of UV- or γ-synthesized gold nanoparticles on TiO2 powder using lipid-based multilamellar vesicles

This article describes a general method for the deposition of gold nanoparticles onto solid support based on the use of multilamellar vesicles (MLVs). Gold nanoparticles (nps) synthesized within lipid-based MLVs by UV- or γ-irradiation were deposited onto TiO₂ powder support. The organic phase from MLVs was removed by calcination leading to high dispersion of naked Au nanoparticles. The resulting particles were investigated using spectrometry, electron microscopy and XPS. The gold nanoparticles were stable and well-separated on the titania surface. It was found that the metal nanoparticles produced by radiolysis have smaller average size and narrower size distribution than those synthesized by photochemical route. After calcinations, the particles tended to enlarge to reach c.a. 18 nm. The gold loading on the titania support could be controlled by changing the gold salt concentration and the MLV-to-TiO₂ weight ratio; values of Au-to-Ti ratio up to 44 % could be obtained.     

Shape-controlled synthesis of highly monodisperse and small size gold nanoparticles

We describe here that fine control of nanoparticle shape and size can be achieved by systematic varia-tion of experimental parameters in the seeded growth procedure in aqueous solution. Cubic and spherical gold nanoparticles are obtained respectively. In particularly, the Au cubes are highly mono-disperse in 33±2 nm diameter. The experimental methods involve the preparation of Au seed particles and the subsequent addition of an appropriate quantity of Au seed solution to the aqueous growth solutions containing desired quantities of CTAB and ascorbic acid (AA). Here, AA is a weak reducing agent and CTAB is not only a stable agent for nanoparticles but also an inductive agent for leading increase in the face of nanoparticle. Ultraviolet visible spectroscopy (UV-vis), X-ray diffraction (XRD), transmission electron microscopy (TEM) are used to characterize the nanoparticles. The results show that the different size gold nanoparticles displayed high size homogenous distribution and formed mono-membrane at the air/solid interface.     

Determination of carcinoembryonic antigen using a novel amperometric enzyme-electrode based on layer-by-layer assembly of gold nanoparticles and thionine

Electrochemical sensing of carcinoembryonic antigen(CEA)on a gold electrode modified by the se- quential incorporation of the mediator,thionine(Thi),and gold nanoparticles(nano-Au),through co- valent linkage and electrostatic interactions onto a self-assembled monolayer configuration is de- scribed in this paper.The enzyme,horseradish peroxidase(HRP),was employed to block the possible remaining active sites of the nano-Au monolayer,avoid the non-specific adsorption,instead of bovine serum albumin(BSA),and amplify the response of the antigen-antibody reaction.Electrochemical ex- periments indicated highly efficient electron transfer by the imbedded Thi mediator and adsorbed nano-Au.The HRP kept its activity after immobilization,and the studied electrode showed sensitive response to CEA and high stability during a long period of storage.The working range for the system was 2.5 to 80.0 ng/mL with a detection limit of 0.90 ng/mL.The model membrane system in this work is a potential biosensor for mimicking the other immunosensor and enzyme sensor.