Rapid enrichment of phosphopeptides by BaTiO3 nanoparticles after microwave-assisted tryptic digest of phosphoproteins, and their identification by MALDI-MS

We show that BaTiO₃ nanoparticles (NPs) can be used as a novel substrate for the rapid enrichment of phosphopeptides from microwave tryptic digests of α-casein and non-fat milk prior to their identification by MALDI-MS. Protein digestion is achieved by microwave tryptic digest for 50?s, and the resulting phosphopeptides can be effectively adsorbed on the surfaces of the NPs. The phosphopeptides were selectively detected via MALDI-MS. Digestion, enrichment and detection are accomplished within ～60?min. The method was applied to the indentification of 24 phosphopeptides from α-casein and of 21 phosphopeptides (of the α-casein type) from nonfat milk.

Coating sulfonated polystyrene microspheres with highly dense gold nanoparticle shell for SERS application

The fabrication of highly dense gold nanoparticles (NPs)-coated sulfonated polystyrene (PS) microspheres and their application in surface-enhanced Raman spectroscopy (SERS) were reported. After the preparation of PS microsphere using dispersion polymerization and subsequent sulfonation, [Ag(NH₃)₂]⁺ ions were adsorbed on the surfaces of the sulfonated PS microspheres and then reduced to silver nanoseeds for further growth of gold NPs shell by seeded growth approach. Reaction conditions such as the concentration of the growth solution and growth time were adjusted to achieve nonspherical gold NPs-coated PS microspheres with different coverage degree. The application of the as-prepared spiky gold NPs-coated PS microsphere hybrid composite in SERS was finally investigated by using 4-aminothiophenol as probe molecules. The results showed that as-prepared gold NPs-coated PS microspheres could be used as functional hybrid materials to exhibit excellent enhancement ability in SERS.

Temperature-assisted ionic liquid dispersive liquid-liquid microextraction combined with high performance liquid chromatography for the determination of PCBs and PBDEs in water and urine samples

We report on silver–gold core-shell nanostructures that contain Methylene Blue (MB) at the gold–silver interface. They can be used as reporter molecules in surface-enhanced Raman scattering (SERS) labels. The labels are stable and have strong SERS activity. TEM imaging revealed that these nanoparticles display bright and dark stripe structures. In addition, these labels can act as probes that can be detected and imaged through the specific Raman signatures of the reporters. We show that such SERS probes can identify cellular structures due to enhanced Raman spectra of intrinsic cellular molecules measured in the local optical fields of the core-shell nanostructures. They also provide structural information on the cellular environment as demonstrated for these nanoparticles as new SERS-active and biocompatible substrates for imaging of live cells.

Novel nanomaterials used for sample preparation for protein analysis

Sample preparation is of vital importance for proteomic analysis because of the high complexity of biological samples. The rapid development of novel nanomaterials with various compositions, morphologies, and proper surface modifications provides a category of powerful tools for the sample preparation for protein analysis. In this paper, we have summarized recent progresses for the applications of novel nanomaterials in sample preparation for the analysis of proteomes, especially for phosphoproteomes, glycoproteomes, and peptidoms. Several kinds of novel nanomaterials were also discussed for their use in other kinds of proteomics analysis.

Tuning of Ti-doped mesoporous silica for highly efficient enrichment of phosphopeptides in human placenta mitochondria

Extraction of phosphopeptides from rather complex biological samples has been a tough issue for deep and comprehensive investigation into phosphoproteomes. In this paper, we present a series of Ti-doped mesoporous silica (Ti-MPS) materials with tunable composition and controllable morphology for highly efficient enrichment of phosphopeptides. By altering the molar ratio of silicon to titanium (Si/Ti) in the precursor, the external morphology, Ti content, internal long-rang order, and surface area of Ti-MPS were all modulated accordingly with certain regularity. Tryptic digests of standard phosphoprotein α- and β-casein were employed to assess the phosphopeptide enrichment capability of Ti-MPS series. At the Si/Ti molar ratio of 8:1, the optimum enrichment performance with admirable sensitivity and capacity was achieved. The detection limit for β-casein could reach 10 fmol, and 15 phosphopeptides from the digest of α-casein were resolved in the spectrum after enrichment, both superior to the behavior of commercial TiO₂ materials. More significantly, for the digest of human placenta mitochondria, 396 phosphopeptides and 298 phosphoproteins were definitely detected and identified after enrichment with optimized Ti-MPS material, demonstrating its remarkable applicability for untouched phosphoproteomes. In addition, this research also opened up a universal pathway to construct a composition-tunable functional material in pursuit of the maximum performance in applications.

Rapid and sensitive detection of bacteria via platinum-labeled antibodies and on-particle ionization and enrichment prior to MALDI-TOF mass spectrometry

We introduce a rapid and sensitive approach to study the interactions of an affinity probe with the bacterial wall. Immunoglobulin was immobilized on platinum nanoparticles, and the resulting probe nanoparticles bind to bacterial walls as confirmed by transmission electron microscopy. A MALDI-MS assay was developed that can detect ~10⁵ cfu mL^?1 of S. marcescens and E. coli. This approach enables simple, rapid and straightforward detection of bacterial proteins, with high resolution and sensitivity, and without the requirement for tedious washing/separation steps.

Synthesis of p-aminothiophenol-embedded gold/silver core-shell nanostructures as novel SERS tags for biosensing applications

We describe a novel surface-enhanced Raman scattering (SERS) tag that is based on Au/Ag core-shell nanostructures embedded with p-aminothiophenol. The Au/Ag core-shell sandwich nanostructures demonstrate bright and dark stripe structure and possess very strong SERS activity. Under optimum conditions, the maximum SERS signal was obtained with a 10?nm thick Ag nanoshell, and the enhancement factor is 3.4?×?10⁴ at 1077?cm^?1. After conjugation to the antibody of muramidase releasing protein (MRP), the Au/Ag core-shell nanostructures were successfully applied to an SERS-based detection scheme for MRP based on a sandwich type of immunoassay.

Multifunctional ZrO2 nanoparticles and ZrO2-SiO2 nanorods for improved MALDI-MS analysis of cyclodextrins, peptides, and phosphoproteins

Multifunctional ZrO₂ nanoparticles (NPs) and ZrO₂-SiO₂ nanorods (NRs) have been successfully applied as the matrices for cyclodextrins and as affinity probes for enrichment of peptides (leucine-enkephalin, methionine-enkephalin and thiopeptide), phosphopeptides (from tryptic digestion products of β-casein) and phosphoproteins from complex samples (urine and milk) in atmospheric pressure matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) and MALDI time-of-flight (TOF) MS. The results show that the ZrO₂ NPs and ZrO₂-SiO₂ NRs can interact with target molecules (cyclodextrins, peptides, and proteins), and the signal intensities of the analytes were significantly improved in MALDI-MS. The maximum signal intensities of the peptides were obtained at pH 4.5 using ZrO₂ NPs and ZrO₂-SiO₂ NRs as affinity probes. The limits of detection of the peptides were found to be 75-105 fmol for atmospheric pressure MALDI-MS and those of the cyclodextrins and β-casein were found to be 7.5-20 and 115-125 fmol, respectively, for MALDI-TOF-MS. In addition, these nanomaterials can be applied as the matrices for the analysis of cyclodextrins in urine samples by MALDI-TOF-MS. ZrO₂ NPs and ZrO₂-SiO₂ NRs efficiently served as electrostatic probes for peptide mixtures and milk proteins because 2–11 times signal enhancement can be achieved compared with use of conventional organic matrices. Moreover, we have successfully demonstrated that the ZrO₂ NPs can be effectively applied for enrichment of phosphopeptides from tryptic digestion of β-casein. Comparing ZrO₂ NPs with ZrO₂-SiO₂ NRs, we found that ZrO₂ NPs exhibited better affinity towards phosphopeptides than ZrO₂-SiO₂ NRs. Furthermore, the ZrO₂ and ZrO₂-SiO₂ nanomaterials could be used to concentrate trace amounts of peptides/proteins from aqueous solutions without tedious washing procedures. This approach is a simple, straightforward, separation-and washing-free approach for MALDI-MS analysis of cyclodextrins, peptides, proteins, and tryptic digestion products of phosphoproteins.      

Two-step on-particle ionization/enrichment via a washing- and separation-free approach: multifunctional TiO2 nanoparticles as desalting, accelerating, and affinity probes for microwave-assisted tryptic digestion of phosphoproteins in ESI-MS and MALDI-MS: comparison with microscale TiO2

We introduce a simplified sample preparation method using bare TiO₂ nanoparticles (NPs) to serve as multifunctional nanoprobes (desalting, accelerating, and affinity probes) for effective enrichment of phosphopeptides from microwave-assisted tryptic digestion of phosphoproteins (α-casein, β-casein and milk) in Electrospray Ionization Mass Spectrometry (ESI-MS) and Matrix Assisted Laser Desorption Ionization Mass Spectrometry (MALDI-MS). The results demonstrate that TiO₂ NPs can effectively enrich and accelerate the digestion reactions of phosphoproteins in aqueous solutions and also from complex real samples. After the microwave experiments, we directly injected the resulting solutions into the ESI-MS and MALDI-MS systems for analysis, and excellent sensitivity was achieved without the need for any washing procedure or separation process. The reasons are attributed to the high binding affinity and selectivity of TiO₂ NPs toward phosphopeptides. Thus, phosphopeptides can be adsorbed onto the TiO₂ NP surface. The digested or partially digested phosphoproteins can be concentrated onto the TiO₂ NP surface. This results in the effective or complete digestion of phosphoproteins in a short period of time (45 s). In addition, high sensitivity and sequence coverage of phosphopeptide can be obtained using TiO₂ NPs as microwave absorbers and affinity probes in MALDI-MS and ESI-MS. This is due to the photocatalytic nature of the TiO₂ NPs because the absorption of microwave radiation that can accelerate the activation of trypsin for efficient digestion of phosphoproteins and enhances the ionization of phosphopeptides. The lowest concentrations detected for ESI-MS and MALDI-MS were 0.1 μM and 10 fmol, respectively, for α-casein. Comparing the two-step approach of TiO₂ NPs with microscale TiO₂ particles, the microscale TiO₂ particles shows no effect on the microwave-assisted tryptic digestion of phosphoproteins. The current approach offers multiple advantages, such as great simplicity, high sensitivity and selectivity, straightforward and separation/washing-free technique for phosphorpeptide enrichment analysis.     

Fluorometric Beam Profiling of UV MALDI Lasers

The photon distribution (beam profile) of the laser as projected onto the sample is an important variable in matrix assisted laser desorption ionization mass spectrometry (MALDI-MS). Measurement of the beam profile is, therefore, an important factor within MALDI-MS. In this study a simple, low-cost fluorometric laser beam profiling technique is presented and applied in conjunction with MALDI-MS experiments. A comparison of the beam profile information afforded by a commercial system and the fluorometric method is carried out to determine the variation of beam profile for an Nd:YVO₄ laser operated between 1 and 25 kHz. The beam profile information can be used, in conjunction with corresponding ion yields, to inform MALDI-MS experiments. The fluorometric beam profiling technique is used to obtain information about the beam dimensions as incident upon the MALDI-MS sample plate in-source. These values are compared with equivalent information obtained from ablation of thin film α-cyano-4-hydroxycinnamic acid (CHCA). In this study, area estimation by ablation provided a value 1.6 times smaller than that obtained by the fluorometric method, demonstrating the need for caution when measuring beam profile and, therefore, fluence, in MALDI-MS.

Ultrasensitive detection of mercury(II) ion using CdTe quantum dots in sol-gel-derived silica spheres coated with calix[6]arene as fluorescent probes

We have developed a simple method for the preparation of highly fluorescent and stable, water-soluble CdTe quantum dots in sol-gel-derived composite silica spheres that were coated with calix[6]arene. The resulting nanoparticles (NP) were characterized in terms of UV, fluorescence and FT-IR spectroscopy and by TEM. The results show that the new NPs display more intense fluorescence intensity and are more stable than its precursors of the type SiO₂/CdTe. In addition, the new NPs exhibit a higher selectivity for the determination of Hg²⁺ than for other metal ions. Under the optimum conditions, the relative fluorescence intensity decreases with the concentration of Hg²⁺ in the range from 2.0 to 14.0?nmol?L^?1 and the detection limit is 1.55?nmol?L^?1. The method is based on the quenching of fluorescence by Hg²⁺ and expected to serve as a practical fluorescence test for rapid detection of Hg²⁺. A mechanism is suggested to explain the inclusion process by a Langmuir binding isotherm, and fluorescence quenching is best described by the Stern-Volmer equation.

Carbon nanomaterial based electrochemical sensors for biogenic amines

This review describes recent advances in the use of carbon nanomaterials for electroanalytical detection of biogenic amines (BAs). It starts with a short introduction into carbon nanomaterials such as carbon nanotubes, graphene, nanodiamonds, carbon nanofibers, fullerenes, and their composites. Next, electrochemical sensing schemes are discussed for various BAs including dopamine, serotonin, epinephrine, norepinephrine, tyramine, histamine and putrescine. Examples are then given for methods for simultaneous detection of various BAs. Finally, we discuss the current and future challenges of carbon nanomaterial-based electrochemical sensors for BAs. The review contains 175 references.

Core-shell fluorescent silica nanoparticles for sensing near-neutral pH values

pH-responsive fluorescent core-shell silica nanoparticles (SiNPs) were prepared by encapsulating the pH-sensitive fluorophore 8-hydroxypyrene-1,3, 6-trisulfonate into their silica shell via a facile reverse microemulsion method. The resulting SiNPs were characterized by SEM, TEM, fluorescence lifetime spectroscopy, photobleaching experiments, and photoluminescence. The core-shell structure endows the SiNPs with reduced photobleaching, excellent photostability, minimized solvatachromic shift, and increased fluorescence efficiency compared to the free fluorophore in aqueous solution. The dynamic range for sensing pH ranges from 5.5 to 9.0. The nanosensors show excellent stability, are highly reproducible, and enable rapid detection of pH. The results obtained with the SiNPs are in good agreement with data obtained with a glass electrode.

Preparation of ionic liquid/silica nanocomposites possessing no weight loss characteristic after calcination at 800 °C

Tetraethoxysilane reacted with silica nanoparticles in the presence of a variety of ionic liquids such as phosphonium-, ammonium-, and imidazolium-type ionic liquids under alkaline conditions to afford the corresponding ionic liquid/silica nanocomposites with a good dispersibility and stability in numerous solvents. It was demonstrated that these ionic liquid nanocomposites can be classified into the nanocomposites possessing no weight loss and weight loss characteristics after calcination at 800 °C, respectively, according to the ionic liquid structures in the composites. The ionic liquids except for 1-ethyl-3-methylimidazolium hydrogen sulfate were found to afford the corresponding ionic liquid/silica nanocomposites possessing no weight loss characteristic even after calcination at 800 °C.

Recent methodological advances in MALDI mass spectrometry

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) is widely used for characterization of large, thermally labile biomolecules. Advantages of this analytical technique are high sensitivity, robustness, high-throughput capacity, and applicability to a wide range of compound classes. For some years, MALDI-MS has also been increasingly used for mass spectrometric imaging as well as in other areas of clinical research. Recently, several new concepts have been presented that have the potential to further advance the performance characteristics of MALDI. Among these innovations are novel matrices with low proton affinities for particularly efficient protonation of analyte molecules, use of wavelength-tunable lasers to achieve optimum excitation conditions, and use of liquid matrices for improved quantification. Instrumental modifications have also made possible MALDI-MS imaging with cellular resolution as well as an efficient generation of multiply charged MALDI ions by use of heated vacuum interfaces. This article reviews these recent innovations and gives the author’s personal outlook of possible future developments.

Synthesis of ratiometric fluorescent nanoparticles for sensing oxygen

A facile reprecipitation-encapsulation method is used for the preparation of ratiometric fluorescent nanoparticles (NPs) for sensing intracellular oxygen. The surface of the NPs is modified in-situ with poly-L-lysine, which renders good biocompatibility and enables easy internalization into living cells. The sensor NPs contain a red fluorescent probe whose fluorescence is sensitive to oxygen with a quenching response of 77 % on going from nitrogen saturation to oxygen saturation, and a reference dye giving a green signal that acts as an oxygen-independent reference. The ratio of the two emissions serves as the analytical information and is sensitive to dissolved oxygen in the 0–43?ppm concentration range. When incorporated into cells, the ratio of the signals increases by 400?% on going from oxygen-saturated to oxygen-free environment.

Analysis of Biomolecules by Atmospheric Pressure Visible-Wavelength MALDI-Ion Trap-MS in Transmission Geometry

We report the development of a new AP visible-wavelength MALDI-ion trap-MS instrument with significantly improved performance over our previously reported system (Int. J. Mass Spectrom. 315, 66–73 (2012)). A Nd:YAG pulsed laser emitting light at 532 nm was used to desorb and ionize oligosaccharides and peptides in transmission geometry through a glass slide. Limits of detection (LODs) achieved in MS mode correspond to picomole quantities of oligosaccharides and femtomole quantities of peptides. Tandem MS (MS/MS) experiments enabled identification of enzymatically digested proteins and oligosaccharides by comparison of MS/MS spectra with data found in protein and glycan databases. Moreover, the softness of ionization, LODs, and fragmentation spectra of biomolecules by AP visible-wavelength MALDI-MS were compared to those obtained by AP UV MALDI-MS using a Nd:YAG laser emitting light at 355 nm. AP visible-wavelength MALDI appears to be a softer ionization technique then AP UV MALDI for the analysis of sulfated peptides, while visible-wavelength MALDI-MS, MS/MS, and MS/MS/MS spectra of other biomolecules analyzed were mostly similar to those obtained by AP UV MALDI-MS. Therefore, the methodology presented will be useful for MS and MSⁿ analyses of biomolecules at atmospheric pressure. Additionally, the AP visible-wavelength MALDI developed can be readily used for soft ionization of analytes on various mass spectrometers.

Fully automated isotopic dimethyl labeling and phosphopeptide enrichment using a microfluidic HPLC phosphochip

Quantitative detection of phosphorylation levels is challenging and requires an expertise in both stable isotope labeling as well as enrichment of phosphorylated peptides. Recently, a microfluidic device incorporating a nanoliter flow rate reversed phase column as well as a titania (TiO₂) enrichment column was released. This HPLC phosphochip allows excellent recovery and separation of phosphorylated peptides in a robust and reproducible manner with little user intervention. In this work, we have extended the abilities of this chip by defining the conditions required for on-chip stable isotope dimethyl labeling allowing for automated quantitation. The resulting approach will make quantitative phosphoproteomics more accessible.

Voltammetric sensor for caffeine based on a glassy carbon electrode modified with Nafion and graphene oxide

A facile, one-step and template-free method has been developed for the electrodeposition of well-dispersed platinum nanoparticles (Pt-NPs) on a glassy carbon electrode. The effects of various inorganic anions and overpotential on the morphologies and dimensions of the final products were investigated. The resulting Pt-NPs show high electrocatalytic activity towards methanol oxidation and are less easily poisoned by carbon monoxide.