可聚合囊泡体系(烯丙基-二甲基-十二烷基溴化胺和十二烷基硫酸钠)在溶液中的盐效应

高稳定的囊泡广泛用于制作生物模型、药物输送以及合成纳米材料的模板。获得高稳定囊泡结构的重要方法之一是用聚合反应固定囊泡结构。作为可聚合囊泡制备的前期基础工作,研究了一种可聚合的囊泡体系：1-丙烯基－2,2,二甲基－十二烷基溴化胺（ADDB）和ADDB与十二烷基磺酸钠（SDS）的等摩尔比混合体系。该囊泡体系即使在高浓度盐水中也能够自发地形成均相的囊泡溶液。在聚合之前,采用动态激光光散射（DLS）、冷冻蚀刻透射电镜（FF-TEM）技术研究了可聚合囊泡的盐效应。DLS测试发现没有盐存在时,囊泡大小为83 nm,盐的浓度增加到250 mmol/L时,囊泡尺寸增大到250 nm。然而继续增大盐浓度到1000 mmol/L, 囊泡尺寸减小到180nm. FF-TEM结果发现盐浓度小于150 mM时, 单个囊泡为70 nm左右,然而明显存在囊泡的絮凝与融合;当盐浓度增加到400 mM时,单个囊泡尺寸减小到20 nm. 因此DLS 观测到囊泡尺寸增大的原因是由于囊泡的絮凝与融合;而尺寸减小的原因是由于在高盐浓度下,盐屏蔽了带电颗粒之间的静电相互作用,在熵增的驱使下,大囊泡变成小囊泡。     

Synthesis of Poly(3,4-ethylenedioxythiophene) Hollow Spheres in CTAB/DBS — Mixed Surfactant Solutions

Summary: Hollow microspheres of PEDOT (poly(3,4-ethylenedioxythiophene) ranging from 0.5 to 10 µm have been synthesized by chemically oxidative polymerization of EDOT(3,4-ethylenedioxythiophene) using ammonium persulfate in a catanionic surfactant solution obtained by mixing cetyltrimethylammonium bromide (CTAB) and sodium dodecylbenzenesulfonate (SDBS). The effect of the molar ratio of CTAB to SDBS on the morphology of the PEDOT oxidation products has been investigated using SEM and TEM and by an analysis of the structural properties using UV-visible, FTIR and Raman spectroscopies, elemental analysis and conductivity measurements. The electro-catalytic activity of PEDOT hollow microspheres for the oxidation of ascorbic acid was investigated by cyclic voltammetry in a pH 6 citrate/phosphate buffer solution and compared to the activity of granular PEDOT particles formed in the absence of the catanionic surfactant.     

正负离子表面活性剂混合体系中正离子与芳环π电子的相互作用

通过UV-vis, ~1H NMR和TEM等方法研究了[溴化十烷基三甲铵（DTAB）与N-（ 4-癸氧基-2-羟基苄基）甘氨酸（C_(10)HG）]正负离子表面活性剂混合体系中的正 离子-π相互作用。实验结果表明在聚集体中DTAB分子处于C_(10)HG的芳环平面上 方,二者之间存在着阳离子-π相互作用,该相互作用有利于囊泡的形成。     

Vesicles Formation Induced by Layered Double Hydroxides in Mixture of Lauryl Sulfonate Betaine and Sodium Dodecyl Benzenesulfonate

This paper reports that structurally positively charged layered double hydroxides (LDHs) nanoparticles induce the vesicle formation in a mixture of a zwitterionic surfactant, lauryl sulfonate betaine (LSB), and an anionic surfactant, sodium dodecyl benzenesulfonate (SDBS). The existence of vesicles was demonstrated by negative‐staining (NS‐TEM) and freeze‐fracture (FF‐TEM) transmission electron microscopy and confocal laser scanning microscopy (CLSM). The size of vesicles increased with the increase of volume ratio (Q) of Mg₃Al‐LDHs sol to the SDBS/LSB solution. A new composite of LDHs nanoparticles encapsulated in vesicles was formed. A possible mechanism of LDHs‐induced vesicle formation was suggested. The positive charged LDHs surface attracted negatively charged micelles or free amphiphilic molecules, which facilitated their aggregation into a bilayer membrane. The bilayer membranes could be closed to form vesicles that have LDHs particles encapsulated. It was also found that an adsorbed compound layer of LSB and SDBS micelles or molecules on the LDHs surface played a key role in the vesicle formation.     

Photochemical control of molecular assembly formation in a catanionic surfactant system

Photochemical control of vesicle disintegration and reformation in aqueous solution was examined using a mixture of 4-butylazobenzene-4'-(oxyethyl)trimethylammonium bromide (AZTMA) as the photoresponsive cationic surfactant and sodium dodecylbenzenesulfonate (SDBS) as the anionic surfactant. Spontaneous vesicle formation was found in a wide-ranging composition of the trans-AZTMA/SDBS system. AZTMA molecules constituting vesicles underwent reversible trans-cis photoisomerization when irradiated with ultraviolet and visible light. Transmission electron microscopy observations using the freeze-fracture technique (FF-TEM) showed that UV light irradiation caused the vesicles to disintegrate into coarse aggregates and visible light irradiation stimulated the reformation of vesicles (normal control). A detailed investigation of the phase state and the effects of UV and visible light irradiation on the AZTMA/SDBS system with the use of electroconductivity, dynamic/static light scattering, and surface tension measurements and FF-TEM observations revealed that in the AZTMA-rich composition (AZTMA/SDBS 9:1) a micellar solution before light irradiation became a vesicular solution after UV light irradiation and visible light irradiation allowed the return to a micellar solution (reverse control). Thus, we could photochemically control the disintegration (normal control) and reformation (reverse control) of vesicles in the same system.     

Blastulae aggregates: new intermediate structures in the micelle-to-vesicle transition of catanionic systems

A new type of intermediate structure was found in the salt-induced micelle-to-vesicle transition in a catanionic system composed of sodium dodecyl sulfate (SDS) and dodecyltrimethylammonium bromide (DTAB) in aqueous solution with an excess of anionic surfactant. The appearance of symmetrically shaped hollow structures, which we named blastulae vesicles, is presented.     

Encapsulation of emulsion droplets by organo-silica shells

Surfactant-stabilized emulsion droplets were used as templates for the synthesis of hollow colloidal particles. Monodisperse silicone oil droplets were prepared by hydrolysis and polymerization of dimethyldiethoxysiloxane monomer, in the presence of surfactant: sodium dodecyl sulphate (SDS, anionic) or Triton X-100 (non-ionic). A sharp decrease in the average droplet radius with increasing surfactant concentration was found, with a linear dependence of the droplet radius on the logarithm of the surfactant concentration. The surfactant-stabilized oil droplets were then encapsulated with a solid shell using tetraethoxysilane, and hollow particles were obtained by exchange of the liquid core. The size and polydispersity of the oil droplets and the thickness of the shell were determined using static light scattering, and hollow particles were characterized by electron microscopy. Details on the composition of the shell material were obtained from energy-dispersive X-ray analysis. In the case of sodium dodecyl sulphate, the resulting shells were relatively thin and rough, while when Triton X-100 was used, smooth shells were obtained which could be varied in thickness from very thick ( approximately 150 nm) to very thin shells ( approximately 17 nm). Finally, hexane droplets were encapsulated using the same procedure, showing that our method can in principle be extended to a wide range of emulsions.     

Spontaneous vesicle formation and phase behavior in mixtures of an anionic surfactant with imidazoline compounds

Unexpected colloidal assemblies form in aqueous mixtures of sodium dodecylbenzenesulfonate (SDBS) with the following imidazoline compounds: 2,2'-azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (V-44, which is a commonly used free-radical initiator), 2,2'-tetramethylenedi-2-imidazoline (TMI), and the main recombination product (RP) from the decomposition of V-44. All of these imidazoline compounds act as hydrotropes. As the molar ratio of imidazoline to SDBS increases, a gradual transition from micelles to vesicles to bilayers to precipitate is observed. V-44 decomposes slowly at 25 degrees C, and the phase diagrams of V-44/SDBS and RP/SDBS are similar. The vesicular region observed in mixtures of TMI/SDBS is larger in composition than that of V-44/SDBS and RP/SDBS mixtures. At equimolar compositions of SDBS and RP, a novel colloidal structure with multiple closely packed bilayers is observed. In these mixtures, small unilamellar vesicles (<80 nm in diameter) form spontaneously, although with time they coexist with a small amount of precipitate and their size increases steadily. The self-assembly of vesicles occurs over a wide range of compositions when the solution pH is lower than the pK(a) of the imidazoline moiety. Quasi-elastic light scattering, cryogenic transmission electron microscopy, nuclear magnetic resonance, and small-angle neutron scattering were used to determine the characteristic length scales and properties of the assemblies.     

Core/Shell Structured PCM Nanocapsules Obtained by Resin Fortified Emulsion Process

Phase change material (PCM, octadecane) nanocapsules were successfully prepared by resin fortified emulsion (RFE) polymerization using the alkali soluble resin (ASR) of poly(ethylene‐co‐acrylic acid) (EAA) and poly(styrene‐co‐acrylic acid) (SAA). Stable PCM nanocapsules were obtained by resin fortified emulsion polymerization, which could be attributed to the prevention of Ostwald ripening due to PCM being hydrophobic. Analysis of online FTIR measurements throughout the reaction confirmed that the nanocapsules contained octadecane as a PCM. TEM imaging of the PCM nanocapsules showed spherical and core/shell morphology. The characteristics of PCM nanocapsules can be controlled by process parameters. As a result, the particle size and particle size distribution (i.e., polydispersity index (Dw/Dn)) of the PCM nanocapsules were created by adjusting manufacturing conditions. The PCM nanocapsules exhibited thermal energy storage (～49.8 J/g) and release (～47.9 J/g) behavior.     

Robust core-shell supramolecular assemblies based on cationic vesicles and ring-shaped [Mo154] polyoxomolybdate nanoclusters: template-directed synthesis and characterizations

Substantial progress has been made recently in extending the supramolecular assembly of biomimetic structures to vesicle-based sophisticated nanocomposites and mesostructures. We report herein the successful preparation of unilamellar surfactant vesicles coated with a monolayer of ring-shaped [Mo(154)] polyoxometalate (POM) nanoclusters, (NH(4))(28)[Mo(154)(NO)(14)O(448)H(14)(H(2)O)(70)]. approximately 350 H(2)O, by coulomb attractions using preformed didodecyldimethylammonium bromide (DDAB) surfactant vesicles as templates. The resultant vesicle-templated supramolecular assemblies are robust (they do not disintegrate upon dehydration) both at room-temperature ambient and vacuum conditions, as characterized by conventional transmission electron microscopy (TEM) and atomic force microscopy (AFM). The flexibility of the complex soft assemblies was also revealed by AFM measurements. The effect of POM-vesicle coulomb attractions on the dimensions of the templating vesicles was also investigated by using dynamic light scattering (DLS). Although origins of the structure stability of the as-prepared supramolecular assemblies are not clear yet, the nanometer scale cavities and the related properties of macroions of the POM clusters may play an important role in it.     

Interactions of Hemoglobin with Vesicles and Tubes Formed from Mixtures of Histidine-Derived Bolaamphiphile and Conventional Surfactants

The interactions between protein and surfactant aggregates have been the subject of intensive studies due to their potential applications in biological systems. Here we report the interactions of hemoglobin (Hb) with vesicles and tube-like aggregates formed from mixtures of a histidine-derived bolaamphiphile and a cconventional surfactant dodecyltrimethylammonium bromide (DTAB). This study was performed using a combination of UV–vis spectroscopy, steady and synchronous fluorescence spectroscopy, circular dichroism, and microcalorimetry measurements. The secondary structure of the protein is disturbed, and then the partially unfolded protein is capable of penetrating the vesicles and tube-like aggregates, this is mainly the result of hydrogen bonding and hydrophobic interactions between Hb and the H₂D/DTAB aggregates. The polar portion of the unfolded protein chains is near to the polar head of the amphiphile in the aggregate’s membrane. Hb is converted to hemichrome in the vesicles, and the heme monomer is solubilized in tube-like aggregates after escaping from the hydrophobic cavity of Hb.     

N-异丙基丙烯酰胺对细乳液聚合制备纳米胶囊形态的影响

将N-异丙基丙烯酰胺(NIPAAm)引入小分子烃为模板的苯乙烯细乳液聚合法制备纳米胶囊的体系.水相引发形成的聚异丙基丙烯酰胺(PNIPAAm)低聚物自由基在聚合温度下(大于其最低临界溶解温度)析出并被苯乙烯细乳液液滴吸附,在热力学推动力和静电斥力的共同作用下,PNIPAAm低聚物倾向于分布在液滴和水的界面上,使液滴界面成为主要的聚合场所,单体从液滴内部向界面扩散补充消耗的单体,生成的聚合物在液滴界面上析出,包覆小分子烃液滴,最终得到纳米胶囊.通过透射电镜观察粒子形态和大小;利用接触角测定仪测定了细乳液液滴的表面张力.考察了NIPAAm用量、油溶性单体/小分子烃比例、交联剂用量及乳化剂和引发剂对的种类对胶囊形态的影响.     

Influence of Surfactant-polymer Complexes on Crystallization and Aggregation of CaCO3

Hollow calcium carbonate(CaCO₃) microspheres with different morphologies were synthesized via the precipitation reaction of calcium chloride with sodium carbonate in the presence of different surfactant-polymer complexes. The selected anionic surfactants were sodium dodecyl sulfonate(SDS) and sodium dodecyl benzenesulfonate(SDBS), respectively. The selected water-soluble polymers were polyacrylic acid(PAA) and polyvinyl pyrrolidone(PVP). In this work, SDS-PVP “pearl-necklace model” micellar complex was formed via hydrophobic effectiveness between SDS and PVP and it served as the spherical template to generate spherical CaCO₃ aggregates with hollow microspheres composed of about 500 nm irregular shaped particles. SDS-PAA complexes and SDBS-PAA complexes formed “core-shell model” aggregates with calcium ions serving as the medium to link the anionic surfactant and the polymer. SDS-PAA “core-shell model” aggregates would act as templates for hollow CaCO₃ microspheres consisting of 30-50 nm irregular shaped crystallites. SDBS-PAA “core-shell model” aggregates served as the spherical aggregate templates to generate spherical CaCO₃ aggregates consisted of many small spherical particles which had grown together. All the obtained CaCO₃ hollow microspheres are calcite particles. This research may provide new insight into the control of morphologies of hollow CaCO₃ microspheres in the presence of surfactant- polymer complexes.     

Glucose encapsulation in catanionic vesicles and kinetic study of the entrapment/release processes in the sodium dodecyl benzene sulfonate/cetyltrimethylammonium tosylate/water system

The sodium dodecyl benzene sulfonate (SDBS)/cetyltrimethyl-ammonium tosylate (CTAT)/water ternary system has previously been shown to give rise to the formation of vesicles for well-defined compositions requiring an excess of one of the surfactants over the other. Two types of vesicular systems can thus be obtained (named V(+) and V(-), depending on the nature of the excess surfactant, i.e., CTAT or SDBS, respectively). In addition, the pure ion-pair amphiphile (IPA) can be obtained after removing the counterions. These different systems (V(+), V(-), and IPA) were investigated in regards to their ability to susbtantially retain a hydrophilic probe such as glucose. The influence of the initial glucose and surfactant concentrations was studied, and dialysis experiments were conducted with a view to determine the kinetics of glucose entrapment and release by the vesicles and, thus, to assess the possibility of a long-term encapsulation. The results indicate that all the vesicular systems studied here are characterized by quite a high permeability of the amphiphilic bilayer. However, SDBS-rich (V(-)) and IPA vesicles proved to be less permeable than CTAT-rich (V(+)) vesicles.     

Salt-induced vesicle formation from single anionic surfactant SDBS and its mixture with LSB in aqueous solution

Vesicles can be formed spontaneously in aqueous solution of a single anionic surfactant sodium dodecyl benzenesulfonate (SDBS) just under the inducement of salt, which makes the formation of vesicle much easier and simpler. The existence of vesicles was demonstrated by TEM image using the negative-staining method. The mechanism of the formation may be attributed to the compression of salt on the electric bilayer of the surfactant headgroups, which alters the packing parameter of the surfactant. The addition of the zwitterionic surfactant lauryl sulfonate betaine (LSB) makes the vesicles more stable, expands the range of formation and vesicle size, and reduces the polydispersity of the vesicles. The vesicle region was presented in a pseudoternary diagram of SDBS/LSB/brine. The variations of vesicle size with the salinity and mixing ratios, as well as the surfactant concentration, were determined using the dynamic light scattering method. It is found that the vesicle size is independent of the surfactant concentration but subject to the salinity and the mixing ratio of the two surfactants.     

Cyclodextrin-surfactant coassembly depends on the cyclodextrin ability to crystallize

Full equilibrium phase diagrams are presented for two ternary systems composed of the cationic surfactant dodecyltrimethylammonium bromide (DTAB), water (D(2)O), and a cyclodextrin, either β-cyclodextrin (β-CD) or (2-hydroypropyl)-β-cyclodextrin (2HPβCD). (2)H NMR, SAXS, WAXS, and visual examination were used to determine the phase boundaries and characterize the nature of the phases formed. Additionally, diffusion (1)H NMR was used to investigate parts of the diagrams. The water solubility of 2HPβCD is 80% (w/w), whereas it is only 1.85% (w/w) for β-CD. Solubility increases for both species upon complexation with DTAB; while the increase is minute for 2HPβCD, it is dramatic for β-CD. Both systems displayed an isotropic liquid solution (L(1)) one-phase region, the extension of which differs extensively between the two systems. Additionally, the DTAB:2HPβCD:water system also comprised a normal hexagonal (H(1)) area, which was not found for the DTAB:β-CD:water system. In the DTAB:β-CD:water system, on the other hand, we found cocrystallization of DTAB and β-CD. From this work we conclude that DTAB and CD molecules form 1:1 inclusion complexes with high affinities. Moreover, we observed indications of an association of 2HPβCD to DTAB micelles in the isotropic solution phase, which was not the case for β-CD and DTAB micelles. This is, to our knowledge, the first complete phase diagrams of surfactant-CD mixtures; as a novel feature it includes the observation of cocrystallization at high concentrations.     

Core-shell nanoparticles: characterization and study of their use for the encapsulation of hydrophobic fluorescent dyes

Core-shell nanocapsules intended to be used as drug scavengers were prepared using a surfactant mixture containing octadecyltrimethoxysilane (OTMS) as a reactive amphiphile, to form spherical templates. A siloxane shell was grown on the surface of the templates by reacting tetramethoxysilane (TMOS) with the silanol groups obtained after the hydrolysis and condensation of OTMS. Dynamic light scattering (DLS) showed that particles with diameters in the range of 100-200 nm were obtained, with core and shell sizes controlled by varying component compositions. Atomic force microscopy (AFM) was used to study the effect of the silica coating of the templates on their robustness after deposition on a substrate. Subsequently, we present studies on the encapsulation of two hydrophobic fluorescent dyes, which are sensors of polarity and rigidity. Steady-state fluorescence spectroscopy was used to examine the fluorescence response of the dyes before and after shell growth. Changes in the emission of the encapsulated dyes were related to changes in the polarity and rigidity of the microenvironment where the dyes were located and correlated to the AFM results. Finally, dye-free core-shell particles were used to sequester the dyes from aqueous suspensions. Fluorescence of the sequestered species was compared to the dye-loaded particles to determine the final fate of the fluorophores in the nanoparticles.     

DSC Investigations of DDAB,DTAB and DHAB Vesicle Aqueous Solutions in Presence of SDS

Interactions of anionic surfactant sodium dodecyl sulphate (SDS) with vesicles formed by synthetic dialkyldimethylammonium bromides i.e. didodecyldimethylammonium bromide (DDAB), ditetradecyldimethylammonium bromide (DTAB), dihexadecyldimethylammonium bromide (DHAB) have been examined by using differential scanning microcalorimetry and electron transmission microscopy. The temperatures and standard enthalpies characterising gel to liquid-crystal transitions increase significantly with increase of SDS concentration for all investigated systems. It means that incorporation of SDS monomers in these vesicular bilayers significantly stabilises their gel states. Moreover, in case of DDAB and DTAB vesicle systems added SDS limits kinetic features of recorded isobaric heat capacity dependencies on temperature observed earlier for the pure vesicular solutions. This revised version was published online in July 2006 with corrections to the Cover Date.     

Giant vesicles of a single-tailed chiral cationic surfactant, (1R,2S)-(-)-N-dodecyl-N-methylephedrinium bromide, in water

Self-assembly properties of a single-tailed chiral cationic surfactant, (1R,2S)-(-)-N-dodecyl-N-methylephedrinium bromide (DMEB), have been studied in water. The molecular self-assemblies of the amphiphile have been characterized by surface tension, fluorescence probes, light scattering, and microscopic techniques. The results have been compared with those of dodecyltrimethylammonium bromide (DTAB) surfactant. The critical aggregation concentration of DMEB was found to be much less than that of DTAB. Surface tension and fluorescence probe studies have suggested formation of micellar structures at low temperature (<28 degrees C) and spontaneous formation of giant vesicles in water above 28 degrees C. The mean size of the aggregates has been measured by a dynamic light scattering method. The micropolarity and microviscosity of the self-assemblies were determined by fluorescence probe technique. The (1)H NMR and FTIR spectra were recorded to elucidate the role of the hydrophobic head group towards the formation of bilayer structures. The phase transition temperatures of the vesicular aggregates were determined by measurement of fluorescence anisotropy at various temperatures.     

Interaction of sodium N-lauroylsarcosinate with N-alkylpyridinium chloride surfactants: spontaneous formation of pH-responsive, stable vesicles in aqueous mixtures

The interaction of sodium N-lauroylsarcosinate (SLS) with N-cetylpyridinium chloride (CPC) and N-dodecylpyridinium chloride (DPC) was investigated in aqueous mixtures. A strong interaction between the anionic and cationic surfactants was observed. The interaction parameter, β was determined for a wide composition range and was found to be negative. The mixed systems were found to have much lower critical micelle concentration (cmc) and surface tension at cmc. The surfactant mixtures exhibit synergism in the range of molar fractions investigated. The self-assembly formation in the mixtures of different compositions and total concentrations were studied using a number of techniques, including surface tension, fluorescence spectroscopy, dynamic light scattering (DLS), transmission electron microscopy (TEM), confocal fluorescence microscopy (CFM). Thermodynamically stable unilamellar vesicles were observed to form upon mixing of the anionic and cationic surfactants in a wide range of composition and concentrations in buffered aqueous media. TEM as well as DLS measurements were performed to obtain shape and size of the vesicular structures, respectively. These unilamellar vesicles are stable for periods as long as 3 months and appear to be the equilibrium form of aggregation. Effect of pH, and temperature on the stability was investigated. The vesicular structures were observed to be stable at pH as low as 2.0 and at biological temperature (37°C). In presence of 10 mol% of cholesterol the mixed surfactant vesicles exhibited leakage of the encapsulated calcein dye, showing potential application in pH-triggered drug release.