封闭型硼烷B15H15^2—（D3h）的结构及稳定性的从头算分析

利用量子化学从头算方法在ＨＦ／６－３１Ｇ水平上，优化计算了带２个负电荷的封闭型硼烷Ｂ１５Ｈ１５＾２－（Ｄ３ｈ）的结构、能量和正则振动频率。该硼烷的简正振动频率计算表明，它是ＨＦ／６－３１Ｇ势能超曲面上的真实稳定点。理论预测它在化学上和动力学上都是稳定的。     

硼烷分子中化学键性质的研究III. 锥型分子B3H6X的结构与成键特征

用MP2/6-31G方法, 对三角锥型分子B3H6X(X=B^2^-, C^-,N, O^+, BH^-, CH和NH^+)及其碎片B3H6和X的结构进行了abinitio研究。结果表明, 当X=NH^+, O^+和N时, B3H6基环上的端氢(Ht)朝着帽基X方向, 而当X=CH, BH^-, B^2^-和C^-时, Ht却转向帽基X的方向。这种特征可用配位原子的电负性和配位原子轨道的弥散性给以说明。我们还进一步研究了B3H6X系列化合物的结合能和稳定性。     

硼烷分子中化学键性质的研究 Ⅱ. B3H7中四中心键及B3H9中三个隔离的氢桥三中心键

用Dunning基进行从头计算的结果表明:在B_3H_7(1103)中氢桥三中心键与BBB三中心键间已用σ-共轭效应”融合”为一个四中心键,其特征为f_(B(1)-B(2))=0.1653,f_(B(2)-B(3))=0.1429,f_(B-H_b-B)=0.3416,f_(4center)=0.7193hartree/bohr.但在B_3H_9中三个氢桥三中心键间不相互作用,保持相互独立,其特性为f_(B-B)=0.0558,f_(B-H_b-B)=0.3922,f_(H_b3cen)=0.5115hartree/bohr.     

硼烷分子中化学键性质的研究III. 锥型分子B3H6X的结构与成键特征

用MP2/6-31G方法, 对三角锥型分子B3H6X(X=B^2^-, C^-,N, O^+, BH^-, CH和NH^+)及其碎片B3H6和X的结构进行了abinitio研究。结果表明, 当X=NH^+, O^+和N时, B3H6基环上的端氢(Ht)朝着帽基X方向, 而当X=CH, BH^-, B^2^-和C^-时, Ht却转向帽基X的方向。这种特征可用配位原子的电负性和配位原子轨道的弥散性给以说明。我们还进一步研究了B3H6X系列化合物的结合能和稳定性。     

金属硼烷arachmo—P4M2B8和closo—MB10X2分子结构的键合研究

利用ＤＶ－Ｘα法计算了ａｒａｃｈｎｏ－（ＰＨ３）４Ｍ２Ｂ８Ｈ８（ｕ－Ｈ）２（Ｍ：Ｎｉ,Ｐｄ,Ｐｔ）和ｃｌｏｓｏ－（ＰＨ３）２ＭＢ１０Ｈ８Ｘ２（Ｍ：Ｆｅ,Ｒｕ,Ｏｓ;Ｘ：Ｃｌ,Ｂｒ,Ｉ,ＯＨ,Ｌｉ）系列分子的电子结构。结果表明在２类ａｒａｃｈｎｏ－Ｐ４Ｍ２Ｂ８和ｃｌｏｓｏ－ＭＢ１０Ｘ２主干结构中均有类似的２种Ｍ－－Ｂ键合：一是金属原子ｄ轨道相对配体原子轨道形成了全对称匹配分子轨道（ＭＯｓ）;二是部分     

硼烷分子中化学键性质的研究 Ⅱ. B3H7中四中心键及B3H9中三个隔离的氢桥三中心键

用Dunning基进行从头计算的结果表明: 在B3H7(1103)中氢桥三中心键与BBB三中心键间已用σ-共轭效应"融合"为一个四中心键, 其特征为fB(1)-B(2)=0.1653, fB(2)-B(3)=0.1429, fB-Hb-B=0.3416, f4center=0.7193hartree/bohr。但在H3H9中三个氢桥三中心键间不相互作用, 保持相互独立, 其特性为fB-B=0.0558, fB-Hb-B=0.3922, fHb3cen.=0.5115hartree/bohr。     

B2Be2簇的结构与成键性质的研究

用HF／6-31Gabinitio法对B2Be2簇9种异构体27个电子态的结构进行了全构型优化,再用大基组二次组态相互作用QCISD（T）／6-311G方法进行单点计算，9种异构体的稳定性顺序是：h＞i＞g＞e＞f＞c＞a＞d＞b.通过结构转变中的Walsh图、能量间隙、键数参数（BNP）和键电荷的研究，揭示了B2Be2的成键特征.     

硼烷及杂硼烷簇合物的结构规则

硼烷及杂硼烷簇合物的结构规则张晓辉，陈利平，由业诚，王国栋（大连大学师范学院化学系大连１１６０３５）关键词原子簇化合物，稠合硼烷，杂硼烷，结构规则本文在研究前人工作的基础上［１－１２］，利用徐光宪提出的超额电子数概念，将硼烷分成多个分子片，以讨论它们...     

质子化硼烷正离子体系电子结构的理论研究

本文用a b initio计算法和近似a b initio计算法(PRDDO)研究了质子化硼烷正离子体系的电子结构,给出了一些正离子体系的优化几何构型并讨论了它们的成键情况。计算的硼烷分子质子亲和势与实验值相当吻合。     

确定硼烷的杂硼烷价成键轨道对称性的拓扑方法

本文通过对硼烷的分子轨道的定域化分析, 建立了由硼烷或杂硼烷的骨架多面体的几何性质, 确定其价成键轨道对称性的拓扑方法。从以多面体骨架的三角面和缺顶点周围的边为基约化出的不同约表示中, 按建议的能量与节面数的对应规则,选定出分子的价成键轨道所属的不可约表示。     

硫化钼微晶成键特性的ab initio研究

应用从头计算分子轨道方法,在HF／MINI／ECP和UHF／MINI／ECP水平上对Mo7S24^n-(n=0、1、2、3、4、6）六个硫化钼微昌体和加氢产物Mo7S24H12的几何构型进行了优化,通过对带电体系的能量分析选出三种有代表性的微晶：Mo7S24^2-、Mo7S24^-和Mo7S24,优化后的Mo7S24结构参数与实验值符合较好。在所研究的硫化钼微晶体中存在着三种不等价硫原子和两种不等价钼原子,计算结果表明,同种不等价原子的成键特征有明显差异,当体系带电及加氢时键级总能量有较大的变化,但形成键的杂化轨道类型却变化很小。     

Ab Initio Study on The Influence of Spin State upon Bonding and Interaction in Fe-COBondCovalenciesinR2BaCuO5(R=Sm,Gd,Dy,Ho,Y,Er,Tm,Yb,Lu)

ＩｎｔｒｏｄｕｃｔｉｏｎＴｒａｎｓｉｔｉｏｎｍｅｔａｌ－ｃａｒｂｏｎｙｌｓｙｓｔｅｍｓＭ－ＣＯｈａｖｅｂｅｅｎｔｈｅｆｏｃｕｓｏｆｃｏｎｔｉｎｕｏｕｓｓｔｕｄｉｅｓｂｏｔｈｔｈｅｏｒｅｔｉｃａｌｙａｎｄｅｘｐｅｒｉｍｅｎｔａｌｙ［１，２］．Ｔｈｅｉｍ...     

Ab Initio Study on The Influence of Spin State upon Bonding,Interaction in Fe—CO

Four Fe—CO states with 3d_σ-4s, 3d_δ-3d_δ electrons spin-paired or spinunpaired were examined to investigate the influences of pairing versus unpairing mechanisms upon the bonding, interaction in Fe—CO. The calculation results show that the Fe—CO bonding, interaction are determined by a balance between the bonding stabilization, the exchange stabilization with 3d_σ-4s electron spinpairing or without it. The 3d_δ-3d_δ electron spinpairing versus unpairing has a surprised effect on the Fe—CO bonding properties even though the 3d_δ orbitals are usually considered as non bonding ones.     

The Parent Hexacarbaborane arachno-C6B6H12 and a Methylated Pentacarbaborane arachno-CH3C5B7H12: Domains of Incipient Hydrocarbon Behavior within Borane Clusters

Increasingly pronounced hydrocarbon character is exhibited by C₆H₆B₁₂, the first unsubstituted hexacarbaborane, and CH₃C₅B₇H₁₂, the first cluster pentacarbaborane. These compounds shed light on the structural dichotomy between open hydrocarbon skeletons and polyhedral borane frameworks for high-carbon carboranes.     

The Atomic Structure and Mechanical Properties of ZIF-4 under High Pressure: Ab Initio Calculations

The effects of pressure on the structural and electronic properties and the ionic configuration of ZIF-4 were investigated through the first-principles method based on the density functional theory. The elastic properties, including the isotropic bulk modulus K, shear modulus G, Young’s modulus E, and Poisson’s ratio ν of the orthorhombic-type structure ZIF-4 were determined using the Voigt–Reuss–Hill averaging scheme. The results show that the ZIF-4 phase is ductile according to the analysis of K/G and Cauchy pressure. The Debye temperatures obtained from the elastic stiffness constants increase with increasing pressure. Finally, the pressure-dependent behaviors of the density of states and ionic configuration are successfully calculated and discussed.     

The Binary Silicides Eu5Si3 and Yb3Si5 – Synthesis,Crystal Structure,and Chemical Bonding

The binary silicides Eu₅Si₃ and Yb₃Si₅ were prepared from the elements in sealed tantalum tubes and their crystal structures were determined from single crystal X-ray data: I4/mcm, a = 791.88(7) pm, c = 1532.2(2) pm, Z = 4, wR2 = 0.0545, 600 F² values, 16 variables for Eu₅Si₃ (Cr₅B₃-type) and P62m, a = 650.8(2) pm, c = 409.2(1) pm, Z = 1, wR2 = 0.0427, 375 F² values, 12 variables for Yb₃Si₅ (Th₃Pd₅ type). The new silicide Eu₅Si₃ contains isolated silicon atoms and silicon pairs with a Si–Si distance of 242.4 pm. This silicide may be described as a Zintl phase with the formula [5 Eu²⁺]¹⁰⁺[Si]^4–[Si₂]^6–. The silicon atoms in Yb₃Si₅ form a two-dimensional planar network with two-connected and three-connected silicon atoms. According to the Zintl-Klemm concept the formula of homogeneous mixed-valent Yb₃Si₅ may to a first approximation be written as [3 Yb]⁸⁺[2 Si^–]^2–[3 Si^2–]^6–. Magnetic susceptibility investigations of Eu₅Si₃ show Curie-Weiss behaviour above 100 K with a magnetic moment of 7.85(5) μ_B which is close to the free ion value of 7.94 μ_B for Eu²⁺. Chemical bonding in Eu₅Si₃ and Yb₃Si₅ was investigated by semi-empirical band structure calculations using an extended Hückel hamiltonian. The strongest bonding interactions are found for the Si–Si contacts followed by Eu–Si and Yb–Si, respectively. The main bonding characteristics in Eu₅Si₃ are antibonding Si1₂-π* and bonding Eu–Si1 states at the Fermi level. The same holds true for the silicon polyanion in Yb₃Si₅.     

Theoretical study on tetranuclear boron clusters: B4X4 (X = H, F, Cl, Br, I)

The molecular orbitals for B4H4, B4F4, B4Cl4, B4Br4 and B4I4 have been calculated by using all-electron or effective core potential ab initio method at the self-consistent field level using basis sets with diffuse and polarization functions. The boron-boron and boron-halide (-hydrogen) distances of these cage compounds are optimized with three kinds of basis sets constrained to a tetrahedral symmetry. According to the localization scheme of Boys, four three-centered two-electron (3c2e) B-B-B bonds localized on each of the faces of the B4 tetrahedron are derived for B4X4 clusters. The HOMO-LUMO energy gaps, atomization energies and Mulliken overlap populations of these compounds indicate that the stabilities of the clusters decrease in the sequence of B4F4 > B4Cl4, B4H4 > B4Br4 > B4I4.     

Ab initio and equilibrium bond angles. Structures of HNO and H2O2

The possibility of calculating accurate ab initio bond angles is examined using a sample of 29 molecules (35 independent angles) containing only first row atoms and whose equilibrium structures are known. Three different correlated methods are compared: MP2, CCSD(T), and DFT, using the hybrid functional B3LYP. The convergence of Dunning's correlation consistent polarized valence basis sets, cc-pVnZ is also studied. It is found that the CCSD(T) method is consistently the most accurate; the DFT/B3LYP being slightly less reliable than MP2. It is shown that when convergence of the basis set is achieved (which is dependent on the kind of bonding) and when the effect of diffuse functions on electronegative atoms is taken into account, a high accuracy may be obtained: 0.03° for the median of absolute deviations or 0.07° for the mean absolute deviation. It does not exclude the possibility that the ab initio method may fail in some particular case, for instance when a large amplitude motion is involved. The MP2/cc-pVQZ method gives a mean absolute deviation of 0.22° to be compared with the 0.07° of the CCSD(T) method. To obtain these results, it was necessary to reanalyze the structure of a few molecules, particularly, a new and more accurate structure is proposed for nitroxyl, HNO and hydrogen peroxide, H₂O₂.     

Theoretical Studies of Distyrylbenzene and its Optical Properties

The electronic and geometrical properties of distyrylbenzene (DSB) are investigated by using chemistry theoretical calculation methods. Specifically, the excited state properties are studied by performing ab initio correlation interaction singlet (CIS) and time‐dependent density functional theory; the ground state and Raman activities are computed by density functional theory with the B3LYP method. Eight conformers of distyrylbenzene are found and they are derived from three isomers which are cis, cis‐, cis, trans‐, and trans, trans‐, respectively. The relative energy shows that each isomer of three types is separated with a large energy barrier, but a small energy difference of each conformer is found if they are in the same type. The transition state also shows the barrier between conformers is lower than isomers. The computed excited transition energies using ZINDO/S based on the optimized geometries at a DFT/B3LYP level with 6–31+G show an excellent agreement with experimental absorption spectra.