Phase Transition in Cs2KMnF6: Crystal Structures of Low- and High-Temperature Modifications

Crystalline Cs₂KMnF₆, when prepared below 500°C, adopts a tetragonal elpasolite structure type. Differential scanning calorimetric investigations indicated that Cs₂KMnF₆ undergoes a phase transition from the low-temperature tetragonal phase (LT) to a high-temperature phase (HT) at about 530°C. Single crystals of the new HT phase could be obtained by annealing a crystalline LT specimen at 600°C followed by rapid quenching to room temperature. In the present study the structures of both phases have been studied by single-crystal X-ray diffraction techniques. The LT phase has the tetragonal space group symmetry I4/mmm, with unit-cell parameters a=6.319(1) (a· =8.936) and c=9.257(2) Å, and Z=2. The HT phase has the cubic symmetry Fm3m, with the cell parameter a=9.067 Å and Z=4. Structural models of the LT and HT phases have been refined vs collected single-crystal X-ray reflection data to R values of 0.034 and 0.022, respectively. The uneven Mn–F bond distance distribution in the LT form, four bonds of 1.860(6) two of 2.034(9) Å, are typical for an octahedrally coordinated high-spin Mn³⁺ ion affected by Jahn–Teller effects. Due to symmetry constraints, all six octahedral Mn–F bonds in the HT form are equal to 1.931(5) Å. However, the mean square atomic displacement parameters of the fluorine atoms increases significantly from about 0.022 Ų for the LT phase to 0.042 Ų for the HT phase. The increased displacement parameters indicate that the phase transition from the LT to the HT form is associated with a directional disorder of the Jahn–Teller distortions around the Mn³⁺ ions.     

Two Mn6 single-molecule magnets with sulfur-contained capping ligand

The reactions of Mn(ClO₄)₂·6H₂O, 1-(2-hydroxyphenyl)ethanone oxime (abbr. as MeSao), NEt₃ and thiophene-2-carboxylic acid/thiophene-3-carboxylic acid (2-TCA/3-TCA) lead to [Mn₆O₂(MeSao)₆(2-TCA)₂(EtOH)₄(H₂O)₂](EtOH)₂ (1) and [Mn₆O₂(MeSao)₆(3-TCA)₂(EtOH)₄(H₂O)₂](EtOH)₂ (2), respectively. Their structures can be described as a core of the [Mn^III₆O₂(Mesao)₆(O₂C-thiophene)₂(EtOH)₄] consisting two off-set, stacked [Mn^III₃(μ³-O²⁻)]⁷⁺ triangular subunits linked by two central oximato O-atoms and two O-atoms from phenoxide group. Magnetic investigation revealed that 1 and 2 all have a spin ground state S = 4, and both complexes show single-molecule magnet behaviors with similar energy barriers U_eff ∼45 K.     

Low temperature synthesis and characterization of Mn3O4 nanoparticles

Heating hydrous manganese (II) hydroxide gel at 85 °C for 12 hours produces Mn₃O₄ nanoparticles. They were characterized by X-ray powder diffraction (XRD) and infrared spectroscopy (FTIR). The particle size estimated from the SEM and X-ray peak broadening is approximately 32 nm, showing them to be nanocrystalline. EPR measurements confirm a typical Mn²⁺signal with a highly resolved hyperfine structure.      

18O-isotope exchange behavior and oxidation activity of La1-xSrxMnO3+δ

Different preparation routes derived both from the usual high-temperature solid state synthesis and the sol-gel process were applied for the synthesis of crystalline La_1-xSr_xMnO₃₊ phases with 0x 0.2. They were investigated by means of temperature programmed isotope exchange (TPIE) under various conditions. The ¹⁸O isotope exchange experiments yielded information on the dependence of the oxygen mobility on temperature and the Mn⁴⁺/Mn³⁺ratio. Both are related to the defect structure of the solid. TPIE was applied for studying the interaction between ¹⁸O₂ and CH₄ under static conditions and was compared with results obtained from catalytic investigations, i.e. the behavior of La_1-xSr_xMnO₃₊ (0x0.2) in both CO and CH₄ oxidation with normal oxygen ¹⁶O₂ under steady flow conditions.This revised version was published online in November 2005 with corrections to the Cover Date.     

Immobilization of manganese peroxidase fromLentinula edodes on azlactone-functional polymers and generation of Mn3+ by the enzyme-polymer complex

Manganese peroxidase (MnP) purified fromLentinula edodes was covalently immobilized on 3M’s azlactone-functional copolymer, 3M EmphazeTM AB1 Biosupport Medium. Tethered MnP is capable of generating Mn³⁺ from Mn²⁺ and H₂O₂. Mn₃₊, properly chelated, can be used as a nonspecific oxidant of organopollutants. A variety of conditions designed to maximize coupling efficiency while maintaining Mn³⁺ -generating catalytic activity were tested. Biochemical characteristics of the MnP enzyme, including amino acid composition, pH and temperature stability, and concentration of its Mn²⁺ substrate, influenced chemical conditions necessary for the coupling reaction. The physical parameters of immobilization reaction time, protein concentration, ionic conditions, pH, and temperature were examined. Results of these experiments indicated maximum coupling efficiency and enzyme activity were achieved by immobilizing at MnP concentrations < 2 mg/mL for at least 2 h using pH 7.0 buffer containing 1.0M sodium sulfate and 1.0 mM Mn²⁺. Increasing coupling reaction temperature also improved coupling efficiency. A synthesis of these optimized immobilizations yielded MnP coupling efficiencies of 40–50% with 35% of the coupled protein retaining enzymatic activity. Results of MnP immobilizations on nonporous azlactone-functional dispersion polymers more hydrophobic than Emphaze are also reported, and coupling efficiencies > 65% with 100% of the coupled enzyme active have been measured.     

Polynuclear 3d complexes based on potentially tetra-anionic heptadentate ligands including amido,amino and phenoxo donors: Synthesis,crystal structure and magnetic properties

The synthesis and characterization of new dinuclear Mn^III and tetranuclear Cu^II complexes, [HL¹Mn(DMSO)]₂ (1) and [H₂L²Cu₂(MeO)₂]₂ (2), are reported (H₄L¹ = 2-hydroxy-N-[2-({2-[(2-hydroxybenzoyl)amino]ethyl}amino)ethyl]benzamide and H₄L² = 2-hydroxy-N-[3-({3-[(2-hydroxybenzoyl)amino]propyl}(methyl)amino)propyl]benzamide). Single crystal X-ray structures have been determined for 1 and 2. In 1 only one of the two amide functions of H₄L¹ is deprotonated in addition to the phenol ones, while in 2 all the amide functions of H₄L² are protonated and none of the potential nitrogen donors (amide and amine) is involved in the coordination to copper. HL¹ and H₂L² do not play the role of compartmental ligands and do not wrap around one Mn and one Cu ion, respectively, but embrace two metal centers yielding, with the respective assistance of auxiliary DMSO and methoxo ligands, dinuclear manganese and tetranuclear copper complexes, respectively. 1 includes two well isolated Mn^III ions (Mn?Mn′ = 7.33 Å) that do not interact magnetically. The intermolecular Mn?Mn″ distance along the 1D chains (10.17 Å) is also too large to allow extended magnetic interactions. The pairwise magnetic interactions between the copper(II) ions in the tetranuclear complex 2 are so large that the χ_MT product is already equal to zero at room temperature, implying that the antiferromagnetic interaction is around −1000 cm⁻¹, as observed previously for di-μ-hydroxo–dicopper complexes.     

Ca6.3Mn3Ga4.4Al1.3O18—A novel complex oxide with 3D tetrahedral framework

A new Ca_6.3Mn₃Ga_4.4Al_1.3O₁₈ compound has been prepared by solid state reaction in a dynamic vacuum of 5×10⁻⁶ mbar at 1200 °C. The crystal structure of Ca_6.3Mn₃Ga_4.4Al_1.3O₁₈ was studied using X-ray powder diffraction (, SG F432, Z=8, R_I=0.031, R_P=0.068), electron diffraction and high resolution electron microscopy. The Ca_6.3Mn₃Ga_4.4Al_1.3O₁₈ structure can be described as a tetrahedral [(Ga_0.59Mn_0.24Al_0.17)₁₅O₃₀]^18.24− framework stabilized with embedded [(Ca_0.9Mn_0.1)₁₄MnO₆]^18.24+ polycations, which consists of an isolated MnO₆ octahedron surrounded by a capped cube of (Ca_0.9Mn_0.1) atoms. The Ca_6.3Mn₃Ga_4.4Al_1.3O₁₈ structure is related to the structure of Ca₇Zn₃Al₅O_17.5, but appears to be significantly disordered due to the presence of two orientations of oxygen tetrahedra around the cationic 0,0,0 and x,x,x () positions in a random way according to the F432 space symmetry. The analogy between the Ca_6.3Mn₃Ga_4.4Al_1.3O₁₈ crystal structure and the structure of the “fullerenoid” Sr₃₃Bi_24+δAl₄₈O_141+3δ/2 oxide is discussed. Ca_6.3Mn₃Ga_4.4Al_1.3O₁₈ adopts a Curie-Weiss behavior of χ(T) above with a Weiss temperature and per formula unit. At lower temperatures, the χ(T) deviates from the Curie-Weiss law indicating a strengthening of the ferromagnetic component of the exchange interaction.     

Biomimetic sensor based on MnMn complex as manganese peroxidase mimetic for determination of rutin

A novel biomimetic sensor for rutin determination based on a dinuclear complex [Mn^IIIMn^II(Ldtb)(μ-OAc)₂]BPh₄ containing an unsymmetrical dinucleating ligand, 2-[N,N-bis(2-pyridylmethyl)-aminomethyl]-6-[N-(3,5-di-tert-butyl-2-oxidoben-zyl)-N-(2-pyridylamino)aminomethyl]-4-methylphenol (H₂Ldtb), as a manganese peroxidase mimetic was developed. Several parameters were investigated to evaluate the performance of the biomimetic sensor obtained after the incorporation of the dinuclear complex in a carbon paste. The best performance was obtained in 75:15:10% (w/w/w) of the graphite powder:Nujol:Mn^IIIMn^II complex, 0.1 mol L⁻¹ phosphate buffer solution (pH 6.0) and 4.0 × 10⁻⁵ mol L⁻¹ hydrogen peroxide. The response of the sensor towards rutin concentration was linear using square wave voltammetry in the range of 9.99 × 10⁻⁷ to 6.54 × 10⁻⁵ mol L⁻¹ (r = 0.9998) with a detection limit of 1.75 × 10⁻⁷ mol L⁻¹. The recovery study performed with pharmaceuticals ranged from 96.6% to 103.2% and the relative standard deviation was 1.85% for a solution containing 1.0 × 10⁻³ mol L⁻¹ rutin (n = 6). The lifetime of this biomimetic sensor was 200 days (at least 750 determinations). The results obtained for rutin in pharmaceuticals using the biomimetic sensor and those obtained with the official method are in agreement at the 95% confidence level.     

AN ALKOXO-BRIDGED BINUCLEAR MANGANESE COMPLEX BIS(μ-PROPIONATO-O: O′)-BIS(μ-3-SALICYLIDENE-AMINO-PROPANOLATO-O″,O‴,N:O″) BISMANGANESE(III)

Abstract

The alkoxo-bridged binuclear complex of Mn^III, [Mn₂(salpa)₂(C₂H₅—COO)₂] (H₂salpa = 3-salicylidene-amino-1-propanol), has been prepared and its crystal structure has been determined by X-ray diffraction. The structure of the title complex consists of discrete binuclear manganese units in which the Mn^III atoms are bridged by two alkoxo ligands via oxygen atoms and supported by two carboxylato bridging ligands in the syn - syn fashion. The complex lies about a crystallographic inversion center. Each Mn^III atom is located in an elongated octahedral environment with one imino N, one phenolic O and two alkoxo O atoms coordinated in the equatorial plane and two O atoms from carboxylato groups at the apical positions. The remarkably longer coordination bond distances in the axial direction are attributed to Jahn-Teller distortion at the d ⁴ manganese center. The distance between the manganese atoms is 2.8662(9) Å. The asymmetrical and symmetric stretching vibrations for carboxylato groups found at 1550 and 1440 cm^?1, respectively, with a separation of less than 200 cm^?1 confirmed the bidentate mode of the carboxylato groups.     

High stable sandwich-type polyoxometallates based on . Synthesis, chemical properties and characterization of [(A-β-SiW9O34)2(MOH2)3CO3] (M = Y and Yb)

Highly hydrolytic and thermally stable sandwich-type polyoxometallates of [(A-β-SiW₉O₃₄)₂(MOH₂)₃CO₃]¹³⁻ (M = Y³⁺ and Yb³⁺) have been synthesized at room temperature by stoichiometric reactions of the trilacunary ligand with M³⁺ in 0.1 M carbonate solution. The new complexes were isolated as sodium and mixed sodium/potassium salts and were characterized by elemental analysis, IR, ¹³C and ²⁹Si NMR, UV–Vis spectroscopy, TGA, DSC and single crystal structure analysis. The crystal structure of the complexes consist of two lacunary Keggin moieties which are linked by a (H₂OMO)₃C belt into an assembly of virtual C₂ symmetry. Each M³⁺ ion adopts a mono-capped trigonal-prismatic coordination. The C₂ axis of the complexes and the local 3-fold axis of the MO₆ group lies in the (H₂OMO)₃C belt plane. The trigonal prismatic geometry is achieved by the two terminal oxygen atoms of an edge shared pair of WO₆ octahedra from each moiety and two oxygen from the belt, and the cap by one external water ligand. The hydrolytic and thermal stabilities of the complexes and the reasons that prove the retention of the isomeric form of the trilacunary ligand upon complexation are discussed.     

Flow-injection chemiluminescence simultaneous determination of cobalt(II) and copper(II) using partial least squares calibration

A flow-injection chemiluminescence (CL) system is proposed for simultaneous determination of Co²⁺ and Cu²⁺ using partial least squares (PLS) calibration. This method is based on the fact that both Co²⁺ and Cu²⁺ catalyse the CL reaction of luminol-H₂O₂, and that their kinetic characteristics of Co²⁺ and Cu²⁺ are significantly different in the luminol-H₂O₂ system. The CL intensity was measured and recorder at different reaction times of luminol-H₂O₂Co²⁺Cu²⁺, and the obtained data were processed by the chemometric approach of partial least squares. The experimental calibration set was composed of 16 sample solutions using an orthogonal calibration design for two component mixtures. The proposed method offers the potential advantages of high sensitivity, simplicity and rapidity for Co²⁺ and Cu²⁺ determination, and was successfully applied to the simultaneous determination of both analytes in real water sample. The present paper demonstrated that the simultaneous determination of two metal ions without any prior separation has been possible using flow-injection CL system.     

A combined diffraction and dielectric properties investigation of Ba3MnNb2O9 complex perovskites

A combined synthesis, diffraction and dielectric properties investigation of the dependence (and effect) of Mn²⁺/Nb⁵⁺ ordering in Ba₃MnNb₂O₉ (BMN) upon annealing atmosphere and processing conditions has been carried out. Annealing in different atmospheres was not found to significantly alter either nominal stoichiometry or structure type. The obtained structure type (disordered metrically cubic or ordered trigonal) as well as the measured electrical properties (in particular, the dielectric loss) were, however, found to be sensitive to the synthesis route. Samples obtained via solid-state reaction were found to be predominantly of 1:2 Mn²⁺/Nb⁵⁺ ordered, trigonal structure type whereas samples obtained via an aqueous solution route were found to be of a Mn²⁺/Nb⁵⁺ ‘disordered’, metrically cubic structure type. All solid-state synthesized samples showed reasonable dielectric properties. The microwave dielectric constant and dielectric quality factor, Q, at 8 GHz of an as-synthesized BMN sample were 38 and 100, respectively. By contrast, the dielectric loss of the metrically cubic, Mn²⁺/Nb⁵⁺ ‘disordered’ samples obtained via an aqueous solution synthesis process were significantly worse.     

ESR and fluorescence studies of Mn-doped Na2ZnP2O7 single crystal and glasses

X-band electron spin resonance (ESR) spectra and fluorescence measurements were performed on Mn-doped Na₂ZnP₂O₇ (NZPO) single crystal synthesized by the Czochralski pulling method and glasses synthesized by the quenching process. For the single crystal, ESR angular dependences were measured in both the zx and xy plans of the NZPO lattice. The fine and hyperfine structure parameters and g-factor values were determined by modelling the experimental spectra. Using the Newman superposition model, the resonating centres in the single crystal and powder (crushed from crystals) samples are assigned to Mn²⁺ ions substituting for both zinc and sodium. For the glass sample the analysis of the ESR data shows that Mn²⁺ ions substitute for the Na⁺ ions. These interpretations are confirmed by the fluorescence measurements with a unique broad red band for the glassy compound and the presence of two emission bands (green and red) in the case of the crystal sample.     

New complexes of fullerences C60 and C70 with CoII and MnII tetraphenylporphyrinates and their ESR study

Complexes of fullerenes C₆₀ and C₇₀ with cobalt(II) and manganese(II) tetraphenylporphyrinates of compositions Mn(TPP)·(C₆₀)₂(CS₂)_1.5 (1), Mn(TPP)·C₇₀(CS₂) _x , wherex<=1.25 (2), Co(TPP)·C₆₀(CS₂)_0.5 (3), and Co(TPP)·C₇₀(CS₂) _x , wherex<0.25 (4), were synthesized and studied by ESR spectroscopy. At 77 K, complexes1 and2 have singlet ESR spectra characteristic of the low-spin (S=1/2) state of Mn^II, withg=2.002 and linewidths of 250 G and 300 G, respectively, and differing significantly from that of the initial Mn^II(TPP) (g ₁=5.9 andg=2.0,S=5/2). The spectra of complexes1 and2 exposed to oxygen exhibit hyperfine structure due to interaction with⁵⁵Mn and¹⁴N nuclei. The ESR spectra of complexes3 and4 are asymmetric (<g>=2.4, ΔH _pp=(500–600) G), which is due to the overlap of parallel and perpendicular spectral components. The absence of ESR signals from C₆₀ ^.− and C₇₀ ^.− radical anions makes it possible to conclude that the formation of complexes1–4 is not accompanied by electron transfer from Co(TPP) and Mn(TPP) to fullerences C₆₀ and C₇₀. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 722–725, April, 1999.     

New unsymmetrical difluoroaromatic compounds and estimation of their reactivities in nucleophilic substitution

A series of previously unknown unsymmetrical difluoroaromatic compounds, viz., p-fluorobenzoylphenyl(p-fluorophenyl)-substituted imidazoles, pyrazines, and quinoxalines, were synthesized according to multistep procedures with the use of chloral as the key compound. The reactivities of the resulting difluoroaromatic compounds were estimated based on ¹⁹F and ¹³C NMR spectral data and the results of quantum-chemical calculations. The calculated charge densities on the C_ipso atoms correlate linearly with the experimental chemical shifts in the ¹⁹F and ¹³C NMR spectra. Difluoroaromatic compounds, which are characterized by _F > –110 and _C > 163 and by the charge density on the C_ipso atom higher than 0.08 e, are sufficiently activated to be used for the preparation of high-molecular-weight polyethers.     

Synthesis and characterization of some novel cadmium(II) complexes with 3-hydroxypicolinic acid (3-OHpicH): Crystal and molecular structures of [CdI(3-OHpic)(3-OHpicH)(H2O)]2, [Cd(3-OHpic)2(H2O)2] and [Cd(3-OHpic)2]n

Cadmium(II) complexes of 3-hydroxypicolinic acid, namely [CdI(3-OHpic)(3-OHpicH)(H₂O)]₂ (1), [Cd(3-OHpic)₂(H₂O)₂] (2) and [Cd(3-OHpic)₂]_n (3) were prepared and characterized by spectroscopic methods (IR, NMR) and their molecular and crystal structures were determined by X-ray crystal structure analysis. Complexes 1 and 2 were prepared in similar reaction conditions using different cadmium(II) salts: cadmium(II) iodide and cadmium(II) acetate dihydrate, respectively, while 3 was prepared by recrystallization of 2 from N,N-dimethylformamide solution. Various coordination modes of 3-OHpicH in 1–3 were established in the solid state: bidentate N,O-chelated mode in 1 and 2, monodentate mode through the carboxylate O atom from zwitterionic ligand in 1 and bidentate N,O-chelated and bridging mode in 3. In the DMF solution of all prepared complexes, only monodentate mode of 3-OHpicH binding to cadmium(II) through the carboxylate O atom was established by ¹H, ¹³C, ¹⁵N and ¹¹³Cd NMR spectroscopy.     

1:1 and 1:2 Complexes of Mercury(II) Halides with 1,3-Thiazolidine-2-thione. Spectral, Thermal, and Crystal Structure Studies

The series of compounds of the general formulae HgX₂(tzdtH) and HgX₂(tzdtH)₂ (X = Cl, Br, I; tzdtH = 1,3-thiazolidine-2-thione) have been prepared, as well as Hg(tzdt)₂. IR, ¹H, and ¹³C NMR spectral data of the complexes indicate thione donation, which is confirmed by the crystal structure analyses of [HgBr₂(tzdtH)]₂, [HgI₂(tzdtH)]₂, and HgI₂(tzdtH)₂. The structures of [HgBr₂(tzdtH)]₂ and [HgI₂(tzdtH)]₂ consist of centrosymmetric doubly bridged dimers, but they are not isostructural. The asymmetry in the HgX₂Hg bridge is more pronounced in the bromo than in the iodo derivative [S–Hg–X(terminal) is 138.19(9)° for X = Br and 123.49(10)° for X = I], which is accompanied by the stronger Hg–S covalent bond in the bromo than in the iodo complex [2.435(4) vs. 2.510(3) Å]. The Hg–X(bridging) (X = Br, I) bond distances are shorter than the sum of van der Waals radii for mercury and X. Dimeric centrosymmetric complex units are held together only by van der Waals forces in [HgI₂(tzdtH)]₂, while in [HgBr₂(tzdtH)]₂ there is an intramolecular hydrogen bond of N–H Br type (3.34(1) Å). HgI₂(tzdtH)₂ exists as a mononuclear tetrahedral complex with two long Hg–S [2.672(1) Å] and two short Hg–I bond distances [2.688(1) Å] related by a twofold axis. The molecules of HgI₂(tzdtH)₂ are linked into infinite chains along the c axis by intermolecular N–H S [3.38(1) Å] hydrogen bonds.     

Hydrolysis of Volatile Ammonium Oxofluorotitanate According to 19F, 17O, and 49Ti NMR Data

Hydrolysis of NH₄TiO_xF_5-2x (x0.4) (I) was investigated by ¹⁹F, ¹⁷O, and ⁴⁹Ti NMR. The interaction of complex I with water is accompanied by the formation of [TiF₆]^2- and multinuclear titanium forms. The composition of the main forms resulting from hydrolysis of I has been established. The bonding of titanium octahedra into dimers and other oligomers occurs by formation of hydroxyl bridges, considerably lowering the pH of the solution. Close analogy has been found between hydrolysis of the title complex and that of titanium tetrafluoride.