A new hybrid double divisor ratio spectra method for the analysis of ternary mixtures

A new spectrophotometric method was developed for the simultaneous determination of ternary mixtures, without prior separation steps. This method is based on convolution of the double divisor ratio spectra, obtained by dividing the absorption spectrum of the ternary mixture by a standard spectrum of two of the three compounds in the mixture, using combined trigonometric Fourier functions. The magnitude of the Fourier function coefficients, at either maximum or minimum points, is related to the concentration of each drug in the mixture. The mathematical explanation of the procedure is illustrated. The method was applied for the assay of a model mixture consisting of isoniazid (ISN), rifampicin (RIF) and pyrazinamide (PYZ) in synthetic mixtures, commercial tablets and human urine samples. The developed method was compared with the double divisor ratio spectra derivative method (DDRD) and derivative ratio spectra-zero-crossing method (DRSZ). Linearity, validation, accuracy, precision, limits of detection, limits of quantitation, and other aspects of analytical validation are included in the text.     

Derivative-ratio spectrophotometric method for the determination of ternary mixture of aspirin, paracetamol and salicylic acid

A derivative spectrophotometric method was developed for the assay of a ternary mixture of aspirin (ASP), paracetamol (PAR) and salicylic acid (SAL). The method is based on the use of the first and second derivatives of the ratio spectra and measurement at zero-crossing wavelengths. The ratio spectra were obtained by dividing the absorption spectrum of the mixture by that of one of the components. The concentration of the other components are then determined from their respective calibration curves treated similarly. The described method was applied for the determination of these combinations in synthetic mixtures and dosage forms. The results obtained were accurate and precise.     

Chemometric methods for the simultaneous determination of some water-soluble vitamins

Two spectrophotometric methods, derivative and multivariate methods, were applied for the determination of binary, ternary, and quaternary mixtures of the water-soluble vitamins thiamine HCI (I), pyridoxine HCI (II), riboflavin (III), and cyanocobalamin (IV). The first method is divided into first derivative and first derivative of ratio spectra methods, and the second into classical least squares and principal components regression methods. Both methods are based on spectrophotometric measurements of the studied vitamins in 0.1 M HCl solution in the range of 200-500 nm for all components. The linear calibration curves were obtained from 2.5-90 microg/mL, and the correlation coefficients ranged from 0.9991 to 0.9999. These methods were applied for the analysis of the following mixtures: (I) and (II); (I), (II), and (III); (I), (II), and (IV); and (I), (II), (III), and (IV). The described methods were successfully applied for the determination of vitamin combinations in synthetic mixtures and dosage forms from different manufacturers. The recovery ranged from 96.1 +/- 1.2 to 101.2 +/- 1.0% for derivative methods and 97.0 +/- 0.5 to 101.9 +/- 1.3% for multivariate methods. The results of the developed methods were compared with those of reported methods, and gave good accuracy and precision.     

A spectroscopic study on applicability of spectral analysis for simultaneous quantification of l-dopa, benserazide and ascorbic acid in batch and flow systems

The usefulness of derivative spectrophotometry for simultaneous assay of l-dopa, benserazide and ascorbic acid in pharmaceuticals was studied. The parameters of derivatisation depends on composition of solution in which particular compound was determined. For quantification of l-dopa in mixtures with benserazide or ascorbic acid the first derivative was used. Its determination in ternary mixture (l-dopa+benserazide+ascorbic acid) is possible by third derivative spectra. Benserazide was assayed in presence of l-dopa using first derivative while in ternary mixture by third derivative. Direct determination of ascorbic acid is possible applying first derivative only in presence of l-dopa. The elaborated derivative spectrophotometric methods were used for assaying of l-dopa and benserazide in their commercial form "Madopar". The proposed spectrophotometric derivative method of simultaneous determination of l-dopa and benserazide was combined with FIA technique.     

A novel spectrophotometric method for the simultaneous kinetic analysis of ternary mixtures by mean centering of ratio kinetic profiles

In this paper, a novel and very simple method was developed for the simultaneous spectrophotometric determination of ternary mixtures, without prior separation steps. The method is based on the mean centering of ratio kinetic profiles. The mathematical explanation of the procedure is illustrated. In order to investigate the applicability of the proposed method, it was applied to the simultaneous spectrophotometric determination of hydrazine, phenylhydrazine and acetylhydrazine based on their condensation reactions with p-(dimethylamino)benzaldehyde (DAB) and p-nitrobenzaldehyde (NB) in micellar sodium dodecyl sulfate (SDS) media as a typical ternary mixture. The analytical characteristics of the method such as accuracy, precision, relative standard deviation (R.S.D.) and relative standard error (R.S.E.) were calculated.     

Spectrophotometric multicomponent determination of sunset yellow, tartrazine and allura red in soft drink powder by double divisor-ratio spectra derivative, inverse least-squares and principal component regression methods

Double divisor-ratio spectra derivative (graphical method), classical least-squares and principal component regression (two numerical methods) methods were developed for the spectrophotometric multicomponent analysis of soft drink powders and synthetic mixtures containing three colorants without any chemical separation. The graphical method is based on the use of derivative signals of the ratio spectra using double divisor. In this method, the linear determination ranges were 2-8 mug ml(-1) sunset yellow, 4-18 mug ml(-1) tartrazine and 2-8 mug ml(-1) allura red in 0.1 M HCl. In the numerical methods, a training set was randomly prepared by using 18 samples containing between 0 and 8 mug ml(-1) of sunset yellow, 0-18 mug ml(-1) of tartrazine and 0-8 mug ml(-1) of allura red. The chemometric calibrations were calculated by using the prepared training set and its absorbances at seven points (from 375.0 to 550.0 nm) in the spectral region 325-584 nm. The proposed methods were validated by using synthetic ternary mixtures and applied to the simultaneous determination of three colorants in soft drink powders. The obtained results were statistically compared with each other.     

Spectrophotometric resolution of ternary mixtures of salicylaldehyde, 3-hydroxybenzaldehyde and 4-hydroxybenzaldehyde by the derivative ratio spectrum-zero crossing method

A new spectrophotometric method for resolving ternary mixtures is proposed. The method is based on the simultaneous use of the first derivative of ratio spectra and measurements of zero-crossing wavelengths. The ratio spectrum is obtained by dividing the amplitudes of the absorption spectrum of the mixture by a standard spectrum of one of the components giving the first derivative of the ratio spectrum. The concentrations of the other components is then determined from their respective calibration graphs established by measuring the ratio derivative analytical signal at the selected zero-crossing points. The method has been applied to resolving ternary mixtures of the isomers salicylaldehyde, 3-hydroxybenzaldehyde and 4-hydroxybenzaldehyde. Previously, we also resolved the binary mixture of salicylaldehyde and 3-hydroxybenzaldehyde. The method compares favourably with other spectrophotometric methods.     

Simultaneous determination and validation of some binary mixtures of antihypertensive drugs using ratio derivative spectrophotometric method

Ratio derivative spectrophotometric technique is presented for the rapid, accurate and precise simultaneous determination of olmesartan medoxomil (OLM), hydrochlorothiazide (HCT), and zofenopril (ZOF) as well as HCT binary mixtures in their dosage forms. First derivative of the ratio spectra (DD1) by measurements using different amplitudes was used and calibration graphs were established for 0.5–12 mg/mL HCT and 0.5–20 mg/mL OLM and ZOF. This method depends on first derivative of the ratio spectra by division of the absorption spectrum of the binary mixture by a standard spectrum of one of the components and then calculating the first derivative of the ratio spectrum. The first derivative of the ratio amplitudes at 250.4 and 291.5 nm for OLM, 250.4 and 298.1 nm for ZOF and 231.8, 332.2, 232.3 and 280.4 nm for HCT were selected for the determination. The proposed methods were successfully applied for determining of both drug combinations (ZOF-HCT and OLM-HCT) in their synthetic mixtures and in pharmaceutical dosage forms. The described procedures are extensively validated, non-destructive and do not require any separation steps.     

Determination of strontium and simultaneous determination of strontium oxide, magnesium oxide and calcium oxide content of Portland cement by derivative ratio spectrophotometry

A derivative spectrophotometric method has been developed for the determination of strontium in Portland cement. The method is applied successfully for the simultaneous determination of SrO, MgO and CaO. It is based on the use of Alizarin Complexone (AC) as a complexing agent and measurement of the derivative ratio spectra of the analytes. Interferences of manganese(II) and zinc(II) were eliminated by precipitation. The validity of the method was examined by analyzing several Standard Reference Material (SRM) Portland cement samples. The strontium complex formed at pH 9.5 allows precise and accurate determination of strontium over the concentration range of 1.5-18 mg L⁻¹ of strontium. The MDL (at 95% confidence level) was found to be 25 ng mL⁻¹ for strontium in National Institute of Standards and Technology (NIST) cement samples using the proposed method.     

Fourth Order Derivative Spectrophotometric Determination of Lead with 1,10-Phenanthroline and Rose Bengal

Abstract

Higher order derivative techniques are mainly used in deconvoluting the overlapping absorption spectra of various analytes in their determination. The procedure utilizing higher order derivatives in molecular absorption spectrophotometry essentially are based on the formation of either binary or ternary complex formation. This paper deals with fourth order derivative spectrophotometric procedure for the determination of traces of lead based on the liquid-liquid extraction of ternary ion association complex lead with 1,10-phenanthroline and rose bengal into chloroform. The ternary ion associate is stable for over 24 hours. The developed procedure is simple, rapid, reliable and allows the determination of as low as 20 ppb of lead in sea water samples.     

Validated stability-indicating methods for the determination of nizatidine in the presence of its sulfoxide derivative

Four new selective, precise, and accurate methods are described for the determination of nizatidine (NIZ) in the presence of its sulfoxide derivative in both the raw material and pharmaceutical preparations. Method A is based on zero-order (0D), first-derivative (1D), and second-derivative (2D) spectrophotometric measurement of NIZ in aqueous solution at the zero-crossing point of its sulfoxide derivative (at 314, 295-334, and 318-348 nm, respectively). Method B is a 1DD spectrophotometric method based on the simultaneous use of the first derivative of the ratio spectra and the measurement of peak amplitude at 297 nm. Method C uses a solvent-induced derivative-difference spectrophotometry with deltaD1 measurement from peak to peak at 315-345 nm. Method D involves quantitative densitometric evaluation of a mixture of the drug and its sulfoxide derivative after separation by high-performance thin-layer chromatography on silica gel plates with chloroform-methanol (9 + 1, v/v) as the mobile phase; Rf values for NIZ and its sulfoxide derivative were 0.4 and 0.2, respectively. The spot was scanned at 254 nm. The first-derivative spectrophotometric method was used to investigate the kinetics of the hydrogen peroxide degradation process at different temperatures. The apparent pseudo-first-order rate constant, half-life, and activation energy were calculated. The results obtained by the proposed methods were analyzed statistically and compared with those obtained by the official method. These methods are suitable as stability-indicating for the determination of NIZ in the presence of its oxidation-induced degradation product (sulfoxide derivative) either in the bulk powder or in pharmaceutical preparations.     

Spectrophotometric determination of molybdenum in the presence of tungsten using gallein and benzyldodecyldimethylammonium bromide

The chemical similarity between molybdenum and tungsten makes the direct spectrophotometric determination of these metals impossible. Usually the determination is preceded by a separation step. In order to find out a selective and quantitative isolation method, coprecipitation with thioacetamide and Cu(II) as a carrier; MnO₂; cupferron, tannin and crystal violet; quinolin-8-ol, tannin and thioacetamide, were examined. Molybdenum(VI) could be determined in the presence of 100-fold mass excess of tungsten after precipitation with thioacetamide and Cu(II). The remaining methods could only be applied if mass excess of W is equal to or lower with respect to Mo. For the resolution of this problem, the derivative spectrophotometry was used. The studies of different order spectra of gallein complexes of molybdenum, tungsten and their mixtures have shown that the fifth-derivative spectra allows one to eliminate the interfering effects of W on the determination of Mo. At 650 nm the spectral features of tungsten is zeroing while the value of the fifth-derivative spectrum of mixture of Mo and W corresponds only to the concentration of molybdenum in the examined solution. Beer’s law is obeyed in the range 0.32–0.80 μg/mL of Mo. The developed derivative spectrophotometric method and the most selective pre-separation method, based on the precipitation of molybdenum(VI) sulphide, were applied to the determination of Mo in Armco iron and steel. The accuracy of the elaborated methods was confirmed by comparison of the determined content of Mo with certified values as well as with the result obtained by the reference ICP-OES technique.     

Analysis of equilibrium in heme model systems, by a successive linear regression method

A method for determination of equilibrium constants in heme model systems is proposed, based on successive linear regression applied to spectrophotometric titrations. The method is illustrated for bis(dimethylglyoximate) iron(II) complexes with pyridine and 4-cyanopyridine ligands.     

A comparative study on various spectrometries with thin layer chromatography for simultaneous analysis of drotaverine and nifuroxazide in capsules

Three spectrophotometric methods including Vierordt's method, derivative, ratio spectra derivative, and thin layer chromatography (TLC)-UV densitometric method were developed for simultaneous determination of drotaverine HCl (DRT) and nifuroxazide (NIF) in presence of its impurity, 4-hydroxybenzohydrazide (4-HBH). In Vierordt's method, (E(1 cm)(1%)) values were calculated at 227 and 368 nm in the zero-order spectra of DRT and NIF. By derivative spectrophotometry, the zero-crossing method, drotaverine HCl was determined using the second derivative at 245 nm and the third derivative at 238 nm, while nifuroxazide was determined using the first derivative at 399 nm and the second derivative at 411 nm. The ratio spectra derivative spectrophotometry is basedon the measure of the amplitude at 459 nm for DRT and at 416 nm for NIF in the first derivative of the ratio spectra. Calibration graphs of the three spectrophotometric methods were plotted in the range 1-10 mug/ml of DRT and 2-20 mug/ml of NIF. TLC-UV densitometric method was achieved on silica gel plates using ethyl acetate : methanol : ammonia 33% (10 : 1 : 0.1 v/v/v) as the mobile phase. The Rf values were 0.74, 0.50, 0.30+/-0.01 for DRT, NIF and 4-HBH, respectively. On the fluorescent plates, the spots were located by fluorescence quenching and the densitometrical area were measured at 308 and 287 nm with linear range 0.2-4 mug/spot and 0.6-12 mug/spot for DRT and NIF, respectively. The proposed methods have been successfully applied to the commercial pharmaceutical formulation without any interference of excipients. Mean recoveries, relative standard deviations and the results of the proposed methods were compared with those obtained by applying the alternate methods.     

Microdetermination of palladium based on formation of ternary complex of palladium with pyrogallol red and cetylpyridinium bromide

A new spectrophotometric method was employed for the determination of microamounts of palladium(II) based on the ternary complex formation with pyrogallol red and cetylpyridinium bromide. A blue green ternary complex, whose molar absorptivities is 22500 mol^?1 cm^?1 at 650 nm, is formed. Composition (PdPGRCP₃) of the ternary complex was established by continuous variation and mole ratio methods. Beer's law range (0.1–8.5 ppm of Pd) and Sandell's sensitivity (0.001 γ/cm²) were evaluated. The conditional stability constant value (logK = 24.35) was determined by Prakash et al. 's method. A detailed study was made for the determination of microamounts of palladium in the presence of platinum metals and several other cations and anions.     

Spectrophotometric determination of hydrocortisone, nystatin and oxytetracycline in synthetic and pharmaceutical preparations based on various univariate and multivariate methods

Two spectrophotometric methods are described and applied to resolve ternary mixtures of the corticosteroid hydrocortisone (HYD) and the antibiotics nystatin (NYS) and oxytetracycline (OXY). The simultaneous determination of these three compounds was firstly accomplished by a derivative method using the “ratio spectrum-zero crossing derivative” and then by multivariate methods partial least squares (PLS)-1, -2 and principal component regression (PCR). Multivariate calibration methods provide, specially PLS-2 in this case, a clear example of the high resolving powder of these techniques. The two described procedures do not require any separation step. Repeatability and reproducibility studies were achieved over two series of 10 standards for each compound showing no significant differences at 95% confidence level in the four spectrophotometric methods. A comparison of the derivative and multivariate calibration results obtained in pharmaceutical formulations was performed resulting in agreement of the values obtained and the results was confirm by a high-pressure liquid chromatography (HPLC) method.     

Liquid-Liquid Extraction and Higher Order Derivative Spectrophotometric Determination of Cobalt with 1,10-Phenanthroline and Rose BENGAL

Abstract

Higher order derivative techniques are mainly used in deconvoluting the overlapping absorption spectra of various analytes in their determination. The procedure utilizing higher order derivatives in molecular absorption spectrophotometry essentially are based on the formation of binary complex viz. metal reacting with a chromogenic reagent. This paper reports a fourth order derivative spectrophotometric procedure for the determination of traces of cobalt based on the liquid-liquid extraction of ternary ion - asociation complex -cobalt, 1, 10-phenanthroline, rose bengal into chloroform. The developed procedure is simple, rapid, reliable and allows the determination of as low as 6 ppb of cobalt in high purity rare earth oxides and salts.     

Simultaneous Determination of Nickel(II) and Copper(II) by Second‐Derivative Spectrophotometric Method in Micellar Media

A second‐derivative spectrophotometric method based on zero‐crossing over technique is developed in simultaneous determination of copper(II) and nickel(II) ions. Methylthymol blue (MTB) as a chromogenic reagent and cetyltrimethylammonium bromide as a surfactant were used, and measurements were carried out in buffered solution at pH 6 and at a temperature of 25 °C. The amplitude of derivative spectra was measured at wavelengths of 631.9 and 587.7 nm for the simultaneous determination of Ni²⁺ and Cu²⁺, respectively. Linearity was obtained in the range of 0.5–5.0 μg mL^?1 for both ions in the presence of 0.0–5.0 μg mL^?1 of the other ion as an interfering ion. IUPAC detection limits for Cu²⁺ and Ni²⁺ ions were obtained at 0.48 and 0.43 μg mL^?1, respectively. The proposed procedure has been applied successfully for the simultaneous determination of copper and nickel in synthetic binary mixtures and real samples.     

Development of an reliable analytical method for synergistic extractive spectrophotometric determination of cobalt(II) from alloys and nano composite samples by using chromogenic chelating ligand

A synergistic simple and selective spectrophotometric method was developed for the determination of cobalt(II) with 1-(2',4'-dinitro aminophenyl)-4,4,6-trimethyl-1,4-dihydropyrimidine-2-thiol [2',4'-dinitro APTPT] as a chromogenic reagent. The proposed method has been described on the basis of synergistic effective extraction of cobalt(II) in presence of pyridine at pH range 9.5-10.2, showed orange-red coloured ternary complex having molar ratio 1:2:2 (M:L:Py). The equilibrium time is 10 min for extraction of cobalt(III) from organic phase. The absorbance of coloured organic layer in chloroform is measured spectrophotometrically at 490 nm against reagent blank. The Beer's law was obeyed in the concentration range 2.5-15 μg mL(-1) of cobalt(II) and optimum concentration range was 5-12.5 μg mL(-1) of cobalt(II) and it was evaluated from Ringbom's plot. The molar absorptivity and Sandell's sensitivity of cobalt(II)-2',4'-dinitro APTPT-pyridine complex in chloroform are 1.109×10(3) L mol(-1) cm(-1) and 0.053 μg cm(-2), respectively while molar absorptivity and Sandell's sensitivity of cobalt(II)-2',4'-dinitro APTPT complex in chloroform are 6.22×10(2) L mol(-1) cm(-1) and 0.096 μg cm(-2), respectively. The composition of cobalt(II)-2',4'-dinitro APTPT-pyridine complex (1:2:2) was established by slope ratio method, mole ratio method and Job's method of continuous variation. The ternary complex was stable for more than 48 h. The interfering effects of various cations and anions were also studied, and use of suitable masking agents enhances the selectivity of the method. The method is successfully applied for the determination of cobalt(II) in binary, synthetic mixtures and real samples. A repetition of the method was checked by finding relative standard deviation (R.S.D.) for n=5 which was 0.15%. The reliability of the method is confirmed by comparison of experimental results with atomic absorption spectrophotometer.     

Rank annihilation factor analysis for multicomponent kinetic‐spectrophotometric determination using difference spectra

In this work rank annihilation factor analysis (RAFA) is used to analyze difference spectra of kinetic‐spectrophotometric data. Annihilation of the contribution of one chemical component from the original data matrix is a general method in RAFA. However, sometimes RAFA is not suitable for studying rank deficient data such as kinetic‐spectrophotometric measurements. On the other hand, in order to apply RAFA for the determination of an analyte in an unknown sample, a standard two‐way matrix of the analyte with rank one should generally be available. This is not usually attainable for kinetic‐spectrophotometric monitoring of complexation reactions. Processes monitored by difference spectroscopy always have the spectrum of the initial stage subtracted from each spectrum in the data matrix. In this work we show that, for kinetic‐spectrophotometric data of complexation reactions, the spectrum of ligand (reactant) itself can be used as initial spectrum for subtraction. The obtained difference matrix of sample and that of analyte of interest will be full‐rank and rank 1, respectively. Therefore the system can be analyzed by RAFA. The proposed method was investigated with simulated data at the first stage. The method was then applied in the analysis of experimental kinetic‐spectrophotometric data of a complexation reactions of Co(II) and Ni(II) with chromogenic reagent 1‐(2‐pyridylazo) 2‐naphthol in order to do multi‐component determination of these ions in various real samples. Copyright © 2009 John Wiley & Sons, Ltd.