Effect of phosphate doping on electric properties and chemical stability of Ba<Subscript>4</Subscript>Ca<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>11</Subscript> protonic conductor

Conductivity of perovskite phosphate–substituted solid solutions of Ba₄Ca₂Nb_{2 –x} P _x O₁₁ (0.0 ≤ x ≤ 0.5) was studied as a function of temperature, partial pressure of oxygen and water vapors. It is proved that the studied systems are protonic conductors at the temperatures below 600°C in the atmosphere with elevated content of water vapors (pH₂O = 1.92 × 10^–2 atm). Introduction of the tetrahedral [PO₄] group in the complex oxide matrix of Ba₄Ca₂Nb₂O₁₁ results in an increase in the oxygen–ionic (dry air, pH₂O = 1.91 × 10^–4 atm) and protonic conductivities (wet air, pH₂O = 1.92 × 10^–2 atm). Is it found that the doping causes a considerable increase in chemical stability of phases with respect to carbon dioxide.     

Hydration and proton transport in solid solutions based on Ba<Subscript>2</Subscript>CaWO<Subscript>6</Subscript>

Hydrated alkaline-earth metal tungstates Ba₄Ca_{2 + x} W_{2 ? x} O_{12 ? 2x} with perovskite structure were studied by the thermogravimetry, ¹H NMR, IR, and Raman spectroscopy methods. Electrical conductivity and transfer numbers were measured with varying T, \(p_{O_2 } \) and \(p_{H_2 O} \). The solid solutions are capable of reversibly intercalating water and can exhibit high-temperature proton transport. The localization of protons on oxygen results in the appearance of energetically nonequivalent OH groups; a small fraction of protons are present in the form of H₂O and H₃O⁺.     

Thermodynamic properties and functions of condensed Bi<Subscript>8</Subscript>O<Subscript>11</Subscript>

The values of ΔH°₂₉₈, S°₂₉₈, H°₂₉₈–H°₀, T, ΔH _fus, and C _p(T), as well as the temperature dependences of the Gibbs energy function, are calculated for Bi₈O₁₁ oxide by proven computational methods.     

The thermodynamic properties of the [(Me<Subscript>3</Subscript>Si)<Subscript>7</Subscript>C<Subscript>60</Subscript>]<Subscript>2</Subscript> fullerene complex

The temperature dependence of the heat capacity C _p ^o of the [(Me₃Si)₇C₆₀]₂ fullerene complex was measured for the first time using precision adiabatic vacuum calorimetry over the temperature range 6.7–340 K and high-accuracy differential scanning calorimetry at 320–635 K. For the most part, the error in the C _p ^o values was about ±0.5%. An irreversible endothermic effect caused by the splitting of the dimeric bond between fullerene fragments and the thermal decomposition of the complex was observed at 448–570 K. The thermodynamic characteristics of this transformation were calculated and analyzed. Multifractal analysis of the low-temperature (T < 50 K) heat capacity was performed, and conclusions were drawn concerning the character of the heterodynamicity of the structure. The experimental data obtained were used to calculate the standard thermodynamic functions C _p ^o (T), H ^o (T) ? H ^o (0), S ^o (T) ? S ^o (0), and G ^o (T) ? H ^o (0) over the temperature range from T → 0 to 445 K and estimate the standard entropy of formation of the compound from simple substances at 298.15 K. The standard thermodynamic properties of [(Me₃Si)₇C₆₀]₂ are compared with those of the (C₆₀)₂ dimer, the [(η⁶-Ph₂)₂Cr]⁺[C₆₀]^?? fulleride, and the initial C₆₀ fullerene.     

Synthesis,hydration, and electric properties of chlorine-substituted brownmillerite Ba<Subscript>1.95</Subscript>In<Subscript>2</Subscript>O<Subscript>4.9</Subscript>Cl<Subscript>0.1</Subscript>

Chlorine-substituted brownmillerite Ba_1.95In₂O_4.9C_l0.1 was obtained from barium indate Ba₂In₂O₅ by solid-phase synthesis. The ability to absorb water from the gas phase was confirmed by thermogravimetric studies. The transport properties were studied while varying the thermodynamic parameters of the external environment (T, pO₂, pH₂O). The chloride ions in the oxygen sublattice of barium indate Ba₂In₂O₅ were found to affect the ion conductivity. In a humid atmosphere, the sample exhibited proton conductivity (E _a = 0.54 eV), whose contribution became dominant below 300°C.     

Molecular mechanism of propane oxidative dehydrogenation on surface oxygen radical sites of VO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/TiO<Subscript>2</Subscript> catalysts

Minimum energy pathways of propane oxidative dehydrogenation to propene and propanol on supported vanadium oxide catalyst VO _x /TiO₂ were studied by periodic discrete Fourier transform (DFT) using a surface oxygen radical as the active site. The propene formation pathway was shown to consist of two consecutive hydrogen abstraction steps. The first step includes C_β–H bond activation of propane followed by the formation of a surface hydroxyl group V–O _t H and a propyl radical n-C₃H₇. This step with the activation energy E* = 0.56 eV (54.1 kJ/mol) appears to be rate-determining. The second step involves the reaction of the bridging O _b oxygen atom with the methylene C–H bond of propyl radical n-C₃H₇ followed by the formation of a hydroxylated surface site HO _t –V⁴⁺–O _b H and propene. The initial steps of the C–H bond activation during propane conversion to propanol and propene by ODH on V⁵⁺–(O _t O _b )^? active sites are identical. The obtained results demonstrate that participation of surface oxygen radicals as the active sites of propane ODH makes it possible to explain relatively low activation energies observed for this reaction on the most active catalysts. The presence of very active radical species in low concentration seems to be the key factor for obtaining high selectivity.     

Synthesis and crystal structure of the new complex cobalt and nickel oxide Sr<Subscript>2.25</Subscript>Y<Subscript>0.75</Subscript>Co<Subscript>1.25</Subscript>Ni<Subscript>0.75</Subscript>O<Subscript>6.84</Subscript>

The complex cobalt and nickel oxide Sr_2.25Y_0.75Co_1.25Ni_0.75O_6.84 has been synthesized by the citrate method. The oxygen content of the oxide has been determined by iodometric titration. The crystal structure of the compound has been refined using X-ray powder diffraction data (a = 3.7951(2) Å, c = 19.700(1) Å, χ₂ = 1.15, R _F ² = 0.0586, R _p = 0.0365, R _wp = 0.0462). Sr_2.25Y_0.75Co_1.25Ni_0.75O_6.84 has the structure of the second member of the Ruddlesden-Popper series A _{n + 1}B_nO_{3n + 1}.     

High-temperature heat capacity and thermodynamic properties of pyrovanadate Pb<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript> and orthovanadate Pb<Subscript>3</Subscript>(VO<Subscript>4</Subscript>)<Subscript>2</Subscript>

The heat capacities of Pb₂V₂O₇ and Pb₃(VO₄)₂ as a function of temperature in the range 350–965 K have been studied by the differential scanning calorimetry method. The C_P = f(T) curve for Pb₂V₂O₇ is described by the equation C_p = (230.76 ± 0.51) + (73.60 ± 0.50)×10^-3T ? (18.38 ± 0.54)×10⁵T^-2 in the entire temperature range. For Pb₃(VO₄)₂, there is a well-pronounced extreme point in the C_P = f(T) curve at T = 371.5 K, which is caused by the existence of a structural phase transition. The thermodynamic properties of the oxide compounds have been calculated.     

Crystal structure of Iron(III) hydrogen diphosphate FeHP<Subscript>2</Subscript>O<Subscript>7</Subscript>

The crystal structure of the β modification of iron(III) hydrogen diphosphate FeHP₂O₇ has been refined by the Rietveld method using powder X-ray diffraction data. The compound crystallizes in the monoclinic system, space group P2₁/n, Z = 4, a = 7.9756(1) Å, b = 12.8260(2) Å, c = 4.8664(6) Å, β = 98.6404(8)°, V = 492.16(1) ų. The structure was refined in the isotropic approximation (pseudo-Voigt function), R _p = 0.024, R _wp = 0.033, R _Bragg = 0.091, R _F = 0.067, and compared with the structures of other compounds M^IIIHP₂O₇ (M^III is a trivalent metal).     

Sm<Subscript>2</Subscript>S<Subscript>3</Subscript>-Sm<Subscript>2</Subscript>O<Subscript>3</Subscript> phase diagram

The Sm₂S₃-Sm₂O₃ phase diagram was studied by physicochemical methods of analysis from 800 K up to melting. Two oxysulfides are formed in the system: Sm₁₀S₁₄O with tetragonal crystal structure (space group I41/acd; unit cell parameters: a = 1.4860 nm, c = 1.9740 nm; microhardness: H = 4700 MPa; solid decomposition temperature: 1500 K) and Sm₂O₂S with hexagonal structure (space group P-3m1; a = 0.3893 nm, c = 0.6717 nm; H = 4500 MPa; congruent melting temperature: 2370 K). Within the extent of the Sm₂O₂S-based solid solution (61–70 mol % Sm₂O₃) at 1070 K, a singular point appears at the compound composition on property-composition curves. The eutectic coordinates: 23 mol % Sm₂O₃ and 1850 K; 80 mol % Sm₂O₃ and 2290 K.     

Molecular structure of NiO<Subscript>2</Subscript>N<Subscript>2</Subscript>C<Subscript>16</Subscript>H<Subscript>14</Subscript> from gas-phase electron diffraction and quantum chemical data

Gas-phase electron diffractometry was used to study the molecular structure of N,N′-ethylenebis(salicylaldiminato)nickel(II), NiO₂N₂C₁₆H₁₄, [hereinafter Ni(salen)] at 583(5) K. The molecule has C ₂ symmetry with a practically planar structure of the NiN₂O₂ coordination unit and with internuclear distances r _α (Ni-O) = 1.882(21) Å and r _α (Ni-N) = 1.889(22) Å. The results of B3LYP/CEP-31G molecular structure calculations are in good agreement with experimental data, whereas the RHF/CEP-31G method significantly overestimates the Ni-N internuclear distance and gives worse results for other structural parameters. According to 3LYP/CEP-31G calculations, the ¹ A low-spin state is 28 kJ/mole lower in energy than the ³ B high-spin state.     

Atropisomeric <Emphasis Type="Italic">N</Emphasis>-acyl-<Emphasis Type="Italic">N</Emphasis>-(cyclopentenylphenyl)glycines in the synthesis of oxazolo[3,4-<Emphasis Type="Italic">a</Emphasis>]benzoxazocinones

Intramolecular [3+2]-cycloaddition was studied of munchnones generated at heating syn- and anti-atropisomers of N-acyl-N-[6-methyl-2-(cyclopent-2-en-1-yl)phenyl]glycines with acetic anhydride. By spectral and X-ray diffraction analysis syn-isomers of acids and tetrahydro-1,4,7-methanetriyl[1,3]oxazolo[3,4-a][1]- bensazocin-3(3aH)-ones were identified.     

Synthesis and crystal structure of (<Emphasis Type="Italic">o</Emphasis>-Diaminobenzene)<Subscript>2</Subscript> Zn(OAc)<Subscript>2</Subscript>

The treatment of o-diaminobenzene with Zn ( OAc )₂ · 2H₂O in alcohol results in the formation of mononuclear bis(o-diaminobenzene)diacetate Zinc, Zn[C₈H₁₁N₂O₂]₂. Its structure was determined by X-ray diffraction analysis. The complex is also characterized by elemental analysis, ¹H NMR and IR. The crystal is monoclinic space group C2, parameters: a = 16.297(5), b = 4.775(3), c = 11.664(5) Å, β = 97.646(5)°, λ = 1.54184 Å, V = 899.6(7) ų, Z = 2, ρ _c = 1.476 g/cm³, M _r = 399.75, F(000) = 416.0, R ₁ = 0.0594, wR ₂ = 0.1439 for 995 observed reflections with I > 2σ(I).     

[H<Subscript>2</Subscript>OT][PdCl<Subscript>4</Subscript>], a salt of the protonated oxythiamine cation with the tetrachloropalladate(II) tetrachloride anion synthesis and crystal structure

The interaction of oxythiamine chloride hydrochloride with a solution of palladium chloride in hydrochloric acid affords a salt of protonated oxythiamine [H₂OT][PdCl₄] (I) (HOT is 4-methyl-3-[(2′-methyl-4′-oxo-3′,4′-dihydropyrimidinyl-5′)methyl]-5-(2-hydroxyethyl)thiazolium, C₁₂H₁₆N₃O₂S⁺). The crystal structure of salt I is determined by X-ray diffraction analysis. The crystals are monoclinic: a = 9.474(3) Å, b = 13.822(2) Å, c = 13.626(4) Å, β = 93.42(2)°, V = 1781.2(3) ų, Z = 4, space group P2₁/n. The structural units of salt I are doubly-charged cations [H₂OT]²⁺ and anions [PdCl₄]^2? joined by hydrogen bonds and electrostatic interaction into dimeric supermolecules. The thiazolium and pyrimidine rings in the cation are planar (the dihedral angle between the planes is 89.6°) and oriented relative to the linking methylene center to form torsion angles Φ _t = 64.9° and Φ _p = 49.9° characteristic of the V′ conformation.     

Conformations and properties of <Emphasis Type="Italic">O</Emphasis>-Alkyl-<Emphasis Type="Italic">S</Emphasis>-(2-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dialkylamino)-ethylmethylthiophosphonates

Conformers of the biologically active compounds CH₃P(O)(OR)(SCH₂CH₂NR ₂ ^′ ), where (I) R = i-C₄H₉, R′ = C₂H₅ and (II) R = C₂H₅, R′ = i-C₃H₇, are calculated within the AM1 level of theory. The elongated and twisted forms with maximum and minimum distances between a nitrogen atom and those of a phosphorus tetrahedron, respectively, and bearing a syn and anti oriented alkoxy group relative to a phosphoryl oxygen, are studied. It is found that the differences between the energy, electronic, and geometric parameters of these forms are apparent in differences between their properties, e.g., the ability to participate in complexation and protonation, reactions that to some extent simulate the interaction between a substance and a biological object.     

Synthesis,structure, physicochemical properties,and solid-phase thermolysis of Co<Subscript>2</Subscript>Sm(Piv)<Subscript>7</Subscript>(2,4-Lut)<Subscript>2</Subscript>

Heterometallic pivalate Co₂Sm(Piv)₇(2,4-Lut)₂ (1) was prepared for the first time and structurally characterized at 293 and 160 K. Antiferromagnetic exchange interactions are dominant in complex 1. This compound experiences a first-order phase transition within 210–260 K. A set of thermodynamic functions was obtained for this complex (C _p , H _T ⁰ - H ₁₈₀ ⁰ , and S _T ⁰ ), and parameters were determined for solid-phase thermolysis where samarium cobaltate SmCoO₃ is the only product.     

Crystal structures of Ti(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>P<Subscript>4</Subscript>O<Subscript>13</Subscript> and Sn(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>P<Subscript>4</Subscript>O<Subscript>13</Subscript>

The characteristics of crystal structures of the titanium(IV) diammonium (Ti(NH₄)₂P₄O₁₃) and tin(IV) diammonium (Sn(NH₄)₂P₄O₁₃) tetraphosphates, which are isostructural with similar silicon(IV) and germanium(IV) salts, have been obtained by the Rietveld method using X-ray powder diffraction data. The compounds crystallize in the triclinic system, space group P \(\overline 1 \), Z = 2, a = 15.0291(7) Å, b = 7.9236(4) Å, c = 5.0754(3) Å, α = 99.168(3)°, β = 97.059(3)°, γ = 83.459(3)° for Ti(NH₄)₂P₄O₁₃ and a = 15.1454(7) Å, b = 8.0103(5) Å, c = 5.1053(3) Å, α = 99.898(6)°, β = 96.806(3)°, γ = 83.881(4)° for Sn(NH₄)₂P₄O₁₃. The structure is refined in the isotropic approximation using the pseudo-Voigt function: R _p = 0.077, R _Bragg = 0.045, R _F = 0.057 for Ti(NH₄)₂P₄O₁₃; R _p = 0.082, R _Bragg = 0.044, R _F = 0.046 for Sn(NH₄)₂P₄O₁₃. The hydrogen atoms of the ammonium cations are placed in the calculated positions. A comparative analysis of the structures of the compounds of the M^IV(NH₄)₂P₄O₁₃ (M^IV = Si, Ge, Ti, Sn) series has been carried out.     

A Quantum Chemical Study of C<Subscript>60</Subscript>Cl<Subscript>30</Subscript>, C<Subscript>60</Subscript>(OH)<Subscript>30</Subscript> Molecules and Fe@C<Subscript>60</Subscript>(OH)<Subscript>30</Subscript> Endocomplex

(U)PBE0/cc-pVDZ method is used to study the structure of C₆₀Cl₃₀, C₆₀(OH)₃₀ molecules and Fe@C₆₀(OH)₃₀ endocomplex. The triplet state of the endocomplex is shown to be the lowest in energy among its four states corresponding to different spin multiplicities and positions of Fe nucleus within the fullerene cavity. This state is characterized by bonding between the iron atom and one of two benzenoid cycles of the carbon cage, six internuclear Fe–C distances (208 pm), and 1s²2s²2p⁶3s²3p⁶3d^7.24s^0.14p^0.3 electron configuration of iron with spin population of 2.36.     

Synthesis and structure of [UO<Subscript>2</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>){CONH<Subscript>2</Subscript>N(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>}<Subscript>2</Subscript>]

The single crystals of [UO₂(C₂O₄){CONH₂N(CH₃)₂}₂] were synthesized and studied by X-ray diffraction. The crystals are monoclinic, a = 7.461(2) Å, b = 8.828(2) Å, c = 11.756(2) Å, β = 107.21(3)°, space group Pc, Z = 2, R = 2.94%. The structure comprises infinite chains [UO₂(C₂O₄){CONH₂N(CH₃)₂}₂] extended along [001] and corresponding to the AT¹¹M ₂ ¹ crystallochemical group (A = UO ₂ ²⁺ , T¹¹ = C₂O ₄ ^2? , M¹ = N,N-CONH₂N(CH₃)₂) of uranyl complexes. The chains are connected into a three-dimensional framework by hydrogen bonds involving the oxygen atoms of oxalate and uranyl ions and the N,N-dimethylcarbamide methyl groups.     

Synthesis,structural, spectral,thermal and comparative biological activity studies of [V<Subscript>2</Subscript>O<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>]

The hydrothermal reaction of a mixture of V₂O₅, VCl₃, 2,5-pyridinedicarboxylic acid and diluted H₂SO₄ for 68 h at 180°C gives a blue colored solution which yields prismatic blue crystals of IV ₂ ^IV O₂(SO₄)₂(H₂O)₆] (1) in 32% yield (based on V). Complex 1 was investigated by means of elemental analysis (C, H and S), TGA, FT-IR, manganometric titration, Single Crystal X-ray Diffraction Methods and also comparative antimicrobial activities. Crystal data for the compound: monoclinic space group P2₁/c and unit cell parameters are a = 7.3850(12) Å, b = 7.3990(7) Å, c = 12.229(2) Å, β = 108.976(12)° and Z = 2. Although structure of 1 as a natural mineral has been previously determined, this work covers new preparation method and full characterization of 1 along with comparison of antibacterial activity between 1 and the commercial vanadium(IV) oxide sulfate hydrate compounds, VOSO₄ · xH₂O (Riedel-de Haën and Alfa Aesar brand names). 1 was evaluated for the antimicrobial activity against gram-positive, gram-negative bacteria, yeasts and mould compared with the commercial VOSO₄ · xH₂O compounds. 1 showed weak activity against bacteria Bacillus cereus, Nocardia asteroides and yeast Candida albicans. A good antimicrobial activity was recorded against Cirtobacter freundii (15 mm). There are only a few reproducible well-defined vanadium(IV) starting materials to use for exploring the synthesis of new materials. VCl₄, VO(acac)₂, VOSO₄ · xH₂O and [V(IV)OSO₄(H₂O)₄] · SO₄ · [H₂N(C₂H₄)₂NH₂] are common starting materials for such applications. In addition to these compounds, 1 can be used as an oxovanadium precursor.