Chain mechanism of the reactions of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′-diphenyl-1,4-benzoquinone diimine with thiophenol and 1-decanethiol

The kinetics of the reactions of N,N′-diphenyl-1,4-benzoquinone diimine with thiophenol and 1-decanethiol in chlorobenzene at 343 K has been investigated spectrophotometrically in an argon atmosphere with monitoring of the disappearance of quinone diimine as its absorbance in the visible range. The acceleration of the reactions in the presence of initiators—tetraphenylhydrazine and azobisisobutyronitrile—indicates that the reactions proceed via a chain mechanism under the chosen experimental conditions. The chain length of the reactions in the absence of an initiator is estimated: ν ≈ 10 units in the reaction of quinone diimine with thiophenol and ν ≈ 100 units in the reaction with 1-decanethiol at a quinone diimine concentration of about 10⁻⁴ mol/L and thiol concentrations of about 10⁻³ mol/L. The dependence of the kinetic parameters of the initiated reaction on the thiophenol concentration suggests that the reaction of the thiyl radical with quinone diimine is the rate-determining step of chain propagation. The rate constant of this reaction is estimated at k _pr = 3.2 × 10⁵ L mol⁻¹ s⁻¹. The rates of chain initiation due to the direct interaction of the initial reactants are estimated. In these reactions, the homolytic cleavage of the S-H bond occurs in the thiol, due to which, other conditions being equal, the radical formation rate in the quinone diiminethiophenol system is at least two orders of magnitude higher than that in the quinone diimine-1-decanethiol, in which the strength of S-H bond is higher. A radical chain mechanism is proposed for the reaction of quinone diimine with the thiols on the basis of the data obtained.     

Highly Selective Addition of a Broad Spectrum of Trimethylsilane Pro‐nucleophiles to N‐tert‐Butanesulfinyl Imines

Addition of organotrimethylsilane reagents to chiral N‐tert‐butanesulfinyl imines can be achieved in good yields and with excellent diastereoselectivities by employing TMSO^?/Bu₄N⁺ as a Lewis base activator in THF. A variety of aliphatic, aromatic, heteroaromatic and organometallic chiral imines were utilised as electrophiles for the synthesis of enantioenriched N‐tert‐butanesulfinyl amides. Remarkably, the same sets of reaction conditions could be used with a highly diverse range of bench‐stable organotrimethylsilane reagents, which highlights the generality and robustness of this methodology.     

Synthesis of chiral iridium complexes immobilized on amphiphilic polymers and their application to asymmetric catalysis

This article details the enantioselective catalytic performance of crosslinked, polymer immobilized, Ir‐based, chiral complexes for transfer hydrogenation of cyclic imines to chiral amines. Polymerization of the achiral vinyl monomer, divinylbenzene, and a polymerizable chiral 1,2‐diamine monosulfonamide ligand followed by complexation with [IrCl₂Cp*]₂ affords the crosslinked polymeric chiral complex, which can be successfully applied to asymmetric transfer hydrogenation of cyclic imines. Polymeric catalysts prepared from amphiphilic achiral monomers have high catalytic activity in the reaction and can be used both in organic solvents and water to give chiral cyclic amines with a high level of enantioselectivity (up to 98% ee). The asymmetric reaction allows for reuse of the heterogeneous catalyst without any loss in activity or enantioselectivity over several runs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3037–3044     

Acid–base complexes of polymers

The physical interactions of polymers with neighboring molecules are determined by only two kinds of interactions: London dispersion forces and Lewis acid–base interactions. These two kinds of attractive energies (together with certain steric restrictions) determine solubility, solvent retention, plasticizer action, wettability, adsorption, adhesion, reinforcement, crystallinity, and mechanical properties. The London dispersion force interaction energies of polymers have been quantified by the dispersion force contribution to cohesive energy density (δ²_d) and the dispersion force contribution to surface energy (δ^d). The Lewis acid–base interactions, often referred to as “polar” interactions, can be best quantified by Drago's C_A and E_A constants for acid sites and C_B and E_B constants for basic sites. In this article infrared spectral shifts are featured as a method of determining enthalpies of acid–base interaction, and the C and E constants for polymers, plasticizers, and solvents. Examples are given where acid–base complexation of polymers with solvents dominate solubility and swelling phenomena. Enthalpies of acid–base complexation in polymer blends are determined from spectral shifts.     

Catalytic effect of hydroxyl-containing compounds at the propagation step of the chain reaction of thiophenol with quinone imines

Russian Chemical Bulletin - Hydroxyl-containing compounds (water, methanol, and phenol) act as efficient catalysts of the chain reactions of thiophenol with quinone imines at their propagation...     

The catalytic reduction of nitrobenzene at the [MoVIO2(O2CC(S)(C6H5)2)2]2− complex intercalated in a Zn(II)–Al(III) layered double hydroxide host: A kinetic model for the molybdenum–pterin binding site in nitrate reductase

The heterogeneous reduction of nitrobenzene by thiophenol catalyzed by the dianionic bis(2‐sulfanyl‐2,2‐diphenylethanoxycarbonyl) dioxomolybdate(VI) complex, [Mo^VIO₂(O₂CC(S)(C₆H₅)₂)₂]²⁻, intercalated into a Zn(II)–Al(III) layered double hydroxide host [Zn_3−xAl_x(OH)₆]^x+, has been investigated under anaerobic conditions. Aniline was found to be the only product formed through a reaction consuming six moles of thiophenol for each mol of aniline produced. The kinetics of the system have been analyzed in detail. In excess of thiophenol, all reactions follow first‐order kinetics (ln([PhNO₂]/[PhNO₂]₀) = −k_appt) with the apparent rate constant k_app being a complex function of both initial nitrobenzene and thiophenol concentrations, as well as linearly dependent on the amount of solid catalyst used. A mechanism for this catalytic reaction consistent with the kinetic experiments as well as the observed properties of the intercalated molybdenum complex has thiophenol inducing the initial coupled proton–electron transfer steps to form an intercalated Mo^IV species, which is oxidized back to the parent Mo^VI complex by nitrobenzene via a two‐electron oxygen atom transfer reaction that yields nitrosobenzene. This mechanism is widespread in enzymatic catalysis and in model chemical reactions. The intermediate nitrosobenzene thus formed is reduced directly by excess thiophenol to aniline. The values of rate coefficients indicate that reduction of nitrobenzene proceeds much faster than proton‐assisted oxidation of thiophenol. This may account for the observation that the presence of protonic amberlite IR‐120(H) increases considerably the rate of the overall reaction catalyzed. Activation parameters in excess of the protonic resin and PhSH were ΔH^≠ = 80 kJ mol⁻¹ and ΔS^≠ = −70 J mol⁻¹ K⁻¹. The large negative activation entropy is consistent with an associative transition state. The present system is characterized by a well‐defined catalytic cycle with multiple‐turnovers reductions of nitrobenzene to aniline without appreciable deactivation. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 212–224, 2001     

Solvophobically Driven Complexation of Adamantyl Mannoside with β-Cyclodextrin in Water and Structured Organic Solvents

The effects of solvent and temperature on the complexation of adamantyl mannoside with β-cyclodextrin and 6-O-monotosyl-6-deoxy-β-cyclodextrin were explored experimentally and by means of molecular dynamics simulations. Efficient binding was observed only in hydrogen-bonded solvents, which indicated solvophobically driven complexation. The stability of the inclusion complex was considerably higher in aqueous media. A pronounced temperature dependence of Δ_rH^○ and Δ_rS^○, resulting in perfect enthalpy–entropy compensation, was observed in water. The complexation thermodynamics was in line with classical rationale for the hydrophobic effect at lower temperatures and the nonclassical explanation at higher temperatures. This finding linked cyclodextrin complexation thermodynamics with insights regarding the effect of temperature on the hydration water structure. The complexation enthalpies and entropies were weakly dependent on temperature in organic media. The signs of Δ_rH^○ and Δ_rS^○ were in accordance with the nonclassical hydrophobic (solvophobic) effect. The structures of the optimized product corresponded to those deduced spectroscopically, and the calculated and experimentally obtained values of Δ_rG^○ were in very good agreement. This investigation clearly demonstrated that solvophobically driven formation of cyclodextrin complexes could be anticipated in structured solvents in general. However, unlike in water, adamantane and the host cavity behaved solely as structure breakers in the organic media explored so far.     

Dependence of the enthalpies of formation of Ag<Superscript>+</Superscript> complexes with glycinate ion and the protonation of glycinate ion on the content of aqueous ethanol solvent

Enthalpy changes are determined by calorimetry for the reactions of glycinate ion (Gly⁻) proto- nation and its complexation with Ag⁺ ion at a temperature of 298 K and ionic strength 0.1 (NaClO₄) in an aqueous ethanol solvent containing 0.0–0.4 and 0.0–0.3 mole fraction of alcohol, respectively. An abnormal relationship of enthalpy changes is found for the processes of stepwise formation of mono- and bis-glycinates of silver(I) in water. It is shown that varying the ethanol content has virtually no effect on the exothermicity of Ag⁺ complexation reactions with glycinate ions at either coordination step and does not change the relationship of the step enthalpies. An analogy is observed in the relationship of solvation contributions from the reagents to the value of Δ_tr H° for the reactions of glycinate ion protonation and its complexation with silver(I) in aqueous ethanol solvents.     

1H and 13C NMR studies of binuclear lanthanide(III):—silver(I) shift or relaxation reagents: Competition between several bonding sites in olefinic,aromatic and heteroaromatic compounds

The relative abilities of weak Lewis bases to complex binuclear lanthanide(III)—silver(I) reagents were checked by inter- or intra- molecular competitions. Preferential complexation at one particular site was shown to be determined mainly by the occurrence of well localized π electrons, by the relief of strain effects or by the lack of steric hindrance. In benzofuran and methoxybenzene derivatives oxygen never interacts directly with the silver reagent and plays a role mainly through electronic effects. Unlike oxygen, sulphur in benzo[b]thiophene is the preferred site of complexation with the silver reagent. On complexation with binuclear shift reagents (lanthanide = Eu, Pr, Yb) the ¹H NMR shifts were shown to result from several mechanisms. Better insight into the precise location of the reagent is obtained in ¹³C NMR by the use of the binuclear relaxation reagent Ag(tfa)-Gd(fod)₃.     

Enantioselective addition of organolithium reagents to imines mediated by C2-symmetric bis(aziridine) ligands

The C₂-symmetric bis(aziridine) ligands 1–5 have been screened in the enantioselective addition of organolithium reagents to imines. Ligand 1 (used in stoichiometric amounts) was found to be superior in terms of chemical yield and enantioselectivity, the best result being 90% yield and 89% e.e. in the addition of vinyllithium to imine 6a. Use of ligand 1 in substoichiometric amounts gave poorer yield and lower enantioselectivity. The enantioselectivity of the reaction was investigated as a function of substrate, reagent, stoichiometry and temperature, but no firm mechanistic conclusions could be drawn. Preliminary results with deuterium-labelled methyllithium indicate complexation/exchange processes involving ligand, reagent and substrate.     

Solvent influence upon complexation of N-phenylaza-15-crown-5 with UO2 2+ cation in binary mixed non-aqueous solvents

The complexation reaction of N-phenylaza-15-crown-5 (PhA15C5) with UO₂ ²⁺ cation was studied in acetonitrile–methanol (AN–MeOH), acetonitrile–butanol (AN–BuOH), acetonitrile–dimethylformamide (AN–DMF) and methanol–propylencarbonate (MeOH–PC) binary solutions, at different temperatures by conductometry method. The conductance data show that the stoichiometry of the complex formed between PhA15C5 with UO₂ ²⁺ cation in most cases is 1:1 [M:L], but in some solvent systems a 1:2 [M:L₂] complex is formed in solutions. The results revealed that, the stability constant of (PhA15C5·UO₂)²⁺ complex in the binary mixed solvents varies in the order: AN–BuOH>AN–MeOH>AN–DMF. In the case of the pure organic solvents, the sequence of the stability of the complex changes as: AN>PC>BuOH>DMF. A non-linear relationship was observed for changes of logK_f of (PhA15C5·UO₂)²⁺ complex versus the composition of the binary mixed solvents. The corresponding standard thermodynamic parameters (ΔH_c°, ΔS_c°) were obtained from temperature dependence of the stability constant. The results show that the values and also the sign of these parameters are influenced by the nature and composition of the mixed solvents.     

Thermodynamic study of complex formation between dibenzo-18-crown-6 and UO2 2+ cation in different non-aqueous binary solutions

In the present work the complexation process between UO₂ ²⁺ cation and the macrocyclic ligand, dibenzo-18-crown-6 (DB18C6) was studied in ethylacetate–dimethylformamide (EtOAc/DMF), ethylacetate–acetonitrile (EtOAc/AN), and ethylacetate–tetrahydrofuran (EtOAc/THF) and ethylacetate–propylencarbonate (EtOAc/PC) binary solutions at different temperatures using the conductometric method. The results show that the stoichiometry of the (DB18C6 . UO₂)²⁺ complex in all binary mixed solvents is 1:1. A non-linear behavior was observed for changes of log K_f of this complex versus the composition of the binary mixed solvents. The stability constant of (DB18C6 . UO₂)²⁺ complex in various neat solvents at 25 °C decreases in order: THF > EtOAc > PC > AN > DMF, and in the binary solvents at 25 °C is: THF–EtOAc > PC–EtOAc > DMF–EtOAc ≈ AN–EtOAc. The values of thermodynamic quantities (?H°_c, ?S°_c) for formation of this complex in the different binary solutions were obtained from temperature dependence of its stability constant and the results show that the thermodynamics of complexation reaction between UO₂ ²⁺ cation and DB18C6 is affected strongly by the nature and composition of the mixed solvents.     

Conductance and FTIR spectroscopic study of sodium tetraphenylborate in pure 1,3-dioxolane and isoamyl alcohol and their binary mixtures

Systems of 1,3-dioxolane and isoamyl alcohol complexed with sodium tetraphenylborate (NaBPh₄) are examined using electrical conductance measurements and FTIR spectroscopy at 298.15 K. The conductance data has been analysed by the Fuoss conductance–concentration equation in terms of the limiting molar conductance (Λ₀), the association constant (K _A) and the distance of closest approach of ions (R). The observed molar conductivities were explained by the formation of ion-pairs (M⁺ + X^? ? MX). Cation–anion interactions along with the hydrogen bonding interactions are investigated by evaluating the frequency shifts of the solvents in the pure state as well as their binary mixtures upon complexation with the salt.     

Transfer reactions in radical polymerization of styrene in acetone–chloroform mixture

The study of chain-transfer reactions in thermal and AIBN-initiated polymerization of styrene is aimed at the determination of transfer constants to the solvents at 60°C. For thermal polymerization the transfer constants C_s to acetone, chloroform, and chloroform mixed with acetone are 3.2 × 10^?5, 4.1 × 10^?5, and 4.4 × 10^?5, respectively. In the case of AIBN-initiated polymerization, the transfer constant of chloroform in the mixture acetone–chloroform is C_s = 3.3 × 10^?4. All these transfer constants are average values. It has been found that neither acetone nor chloroform satisfies the Mayo equation in the presence of transfer agent very well. These anomalies can be explained by assuming a complexation phenomenon. The changes in the polarity and resonance are taken into account. It is considered that in the chain-transfer reactions under investigation, the association or complex-forming ability of solvent and monomer or polymer play a role. In studying the chain-transfer reaction in the acetone–chloroform solvent mixture another phenomenon affecting the determination of the chain transfer constant is assumed. This phenomenon consists in formation of associates in which both solvents participate.     

Rates and mechanisms of oxidation of ZnTPP by CCI3O2 radicals in various solvents

Trichloromethylperoxyl radicals were produced by pulse radiolysis of air saturated solutions containing CCl₄. The rate constants for the reaction of CCl₃O₂ radicals with zinc tetraphenylporphyrin (ZnTPP) were determined in various solvents. They were found to vary between 3 × 10⁷ and 3 × 10⁹ M^?1 s^?1. The changes in rate constants result from complexation of ZnTPP with the different solvents, but did not correspond to changes in redox potential of ZnTPP. The rate constants were found to depend on the strength of the axial complexation, indicating an inner sphere mechanism whereby the radical binds to the metal prior to electron transfer.     

Study of complex formation between La+3, Ce+3 and Y3+ cations with some 18-membered crown ethers in methanol–water and methanol–acetonitrile binary mixtures

The complexation reactions between some rare earth metal cations (Ln; Y³⁺, La³⁺ and Ce³⁺) with 18-crown-6 (18C6), dicyclohexyl-18-crown-6 (DC18C6), benzo-18-crown-6 (B18C6) and decyl-18-crown-6 (Dec18C6), have been studied in methanol–acetonitrile (MeOH–AN) and methanol–water (MeOH–H₂O) binary mixtures using a competitive spectrophotometric method. 2-(2-thiazolylazo)-4-methyl phenol (TAC or L) was used as colorimetric complexant. It was found that the selectivity order of TAC for Ln cations is highly changed with changing the composition of the mixed solvents. Moreover, as the concentration of acetonitrile increases in MeOH–AN binary mixture, the stability of Ln–TAC complexes increases and passes through a maximum at a certain mole fraction of acetonitrile. In addition, the stability of Ln–crown ether complexes increases with increasing the concentration of methanol in MeOH–H₂O and acetonitrile in MeOH–AN binary solutions. A non linear behaviour was observed for variation of stability constants of all complexes versus the composition of the mixed solvents. The results show that 18C6 generally forms more stable complexes with La³⁺ and Ce³⁺ cations than DC18C6 in methanol and MeOH–H₂O binary mixtures, while this sequence is reversed in the methanol-acetonitrile binary mixtures which are rich with respect to acetonitrile.     

A Porphyrin-Based Covalent Organic Framework for Metal-Free Photocatalytic Aerobic Oxidative Coupling of Amines

Imines are important intermediates in drug synthesis. Photocatalytic aerobic oxidative coupling of amines has been considered as a clean and promising way to produce imines and has attracted great attention. Herein, we designed and synthesized a novel two-dimensional porphyrin-based covalent organic framework (Por-BC-COF) which adopts an AA stacking mode with excellent crystallinity, high Brunauer–Emmett–Teller surface areas (1200 m² g⁻¹), wide light absorption range (200–1300 nm) and good stability in a variety of organic solvents. Por-BC-COF can be used as a metal-free heterogeneous photocatalyst for the photocatalytic oxidation of amines to imines under visible light and red light with a high yield (97 %). This work presents a novel and efficient COF photocatalyst in the application of light-driven organic synthesis.     

[F]Fluoromethyl iodide ([F]FCH2I): preparation and reactions with phenol, thiophenol, amide and amine functional groups

In this study, we report the synthesis and reactivity of [¹⁸F]fluoromethyl iodide ([¹⁸F]FCH₂I) with various nucleophilic substrates and the stabilities of [¹⁸F]fluoromethylated compounds. [¹⁸F]FCH₂I was prepared by reacting diiodomethane (CH₂I₂) with [¹⁸F]KF, and purified by distillation in radiochemical yields of 14-31% (n = 25). [¹⁸F]FCH₂I was stable in organic solvents commonly used for labeling and aqueous solution with pH 1-7, but was unstable in basic solutions. [¹⁸F]FCH₂I displayed a high reactivity with various nucleophilic substrates such as phenol, thiophenol, amide and amine. The [¹⁸F]fluoromethylated compounds synthesized by the reactions of phenol, thiophenol and tertiary amine with [¹⁸F]FCH₂I were stable for purification, formulation and storage. In contrast, the [¹⁸F]fluoromethylated compounds synthesized by the reactions of primary or secondary amines, and amide with [¹⁸F]FCH₂I were too unstable to be detected or purified from the reaction mixtures. Defluorination of these [¹⁸F]fluoromethyl compounds was a main decomposition route.     

Measuring the Relative Hydrogen‐Bonding Strengths of Alcohols in Aprotic Organic Solvents

Voltammetric experiments with 9,10‐anthraquinone and 1,4‐benzoquinone performed under controlled moisture conditions indicate that the hydrogen‐bond strengths of alcohols in aprotic organic solvents can be differentiated by the electrochemical parameter ΔE_p^red=|E_p^red(1)?E_p^red(2)|, which is the potential separation between the two one‐electron reduction processes. This electrochemical parameter is inversely related to the strength of the interactions and can be used to differentiate between primary, secondary, tertiary alcohols, and even diols, as it is sensitive to both their steric and electronic properties. The results are highly reproducible across two solvents with substantially different hydrogen‐bonding properties (CH₃CN and CH₂Cl₂) and are supported by density functional theory calculations. This indicates that the numerous solvent–alcohol interactions are less significant than the quinone–alcohol hydrogen‐bonding interactions. The utility of ΔE_p^red was illustrated by comparisons between 1) 3,3,3‐trifluoro‐n‐propanol and 1,3‐difluoroisopropanol and 2) ethylene glycol and 2,2,2‐trifluoroethanol.     

Exploiting Synergistic Effects in Organozinc Chemistry for Direct Stereoselective C‐Glycosylation Reactions at Room Temperature

Pairing a range of bis(aryl) zinc reagents ZnAr₂ with the stronger Lewis acidic [(ZnAr^F₂)] (Ar^F=C₆F₅), enables highly stereoselective cross‐coupling between glycosyl bromides and ZnAr₂ without the use of a transition metal. Reactions occur at room temperature with excellent levels of stereoselectivity, where ZnAr^F₂ acts as a non‐coupling partner although its presence is crucial for the execution of the C(sp²)–C(sp³) bond formation process. Mechanistic studies have uncovered a unique synergistic partnership between the two zinc reagents, which circumvents the need for transition‐metal catalysis or forcing reaction conditions. Key to the success of the coupling is the avoidance of solvents that act as Lewis bases versus diarylzinc compounds (e.g. THF).