Controlling the Microstructure of Conjugated Polymers in High-Mobility Monolayer Transistors via the Dissolution Temperature

It remains a challenge to precisely tailor the morphology of polymer monolayers to control charge transport. Herein, the effect of the dissolution temperature (T_dis) is investigated as a powerful strategy for morphology control. Low T_dis values cause extended polymer aggregation in solution and induce larger nanofibrils in a monolayer network with more pronounced π–π stacking. The field-effect mobility of the corresponding monolayer transistors is significantly enhanced by a factor of four compared to devices obtained from high T_dis with a value approaching 1 cm² V⁻¹ s⁻¹. Besides that, the solution kinetics reveal a higher growth rate of aggregates at low T_dis, and filtration experiments further confirm that the dependence of the fibril width in monolayers on T_dis is consistent with the aggregate size in solution. The generalizability of the T_dis effect on polymer aggregation is demonstrated using three other conjugated polymer systems. These results open new avenues for the precise control of polymer aggregation for high-mobility monolayer transistors.     

Ordered Solid‐State Microstructures of Conjugated Polymers Arising from Solution‐State Aggregation

Controlling the solution‐state aggregation of conjugated polymers for producing specific microstructures remains challenging. Herein, a practical approach is developed to finely tune the solid‐state microstructures through temperature‐controlled solution‐state aggregation and polymer crystallization. High temperature generates significant conformation fluctuation of conjugated backbones in solution, which facilitates the polymer crystallization from solvated aggregates to orderly packed structures. The polymer films deposited at high temperatures exhibit less structural disorders and higher electron mobilities (up to two orders of magnitude) in field‐effect transistors, compared to those deposited at low temperatures. This work provides an effective strategy to tune the solution‐state aggregation to reveal the relationship between solution‐state aggregation and solid‐state microstructures of conjugated polymers.     

Ordered Solid-State Microstructures of Conjugated Polymers Arising from Solution-State Aggregation

Controlling the solution-state aggregation of conjugated polymers for producing specific microstructures remains challenging. Herein, a practical approach is developed to finely tune the solid-state microstructures through temperature-controlled solution-state aggregation and polymer crystallization. High temperature generates significant conformation fluctuation of conjugated backbones in solution, which facilitates the polymer crystallization from solvated aggregates to orderly packed structures. The polymer films deposited at high temperatures exhibit less structural disorders and higher electron mobilities (up to two orders of magnitude) in field-effect transistors, compared to those deposited at low temperatures. This work provides an effective strategy to tune the solution-state aggregation to reveal the relationship between solution-state aggregation and solid-state microstructures of conjugated polymers.     

Diketopyrrolopyrrole‐Porphyrin Based Conjugated Polymers for Ambipolar Field‐Effect Transistors

Porphyrin‐based molecules have been widely used in dye‐sensitized solar cells and bulk heterojunction solar cells, but their application in field‐effect transistors (FETs) is limited. In this work, two conjugated polymers based on diketopyrrolopyrrole and porphyrin units were developed for FETs. The polymers exhibit extra‐low band gap with energy levels close to −4.0 eV and −5.0 eV due to the strong electron‐donating and withdrawing ability of porphyrin and diketopyrrolopyrrole. With additionally high crystalline properties, ambipolar charge carrier transports with a hole mobility of 0.1 cm² V⁻¹ s⁻¹ in FETs were realized in these polymers, representing the highest performance in solution‐processed FETs based on porphyrin unit.     

Novel Conjugated Polymers Based on Dithieno[3,2‐b:6,7‐b]carbazole for Solution Processed Thin‐Film Transistors

Two conjugated polymers (CPs) P‐tCzC12 and P‐tCzC16 comprising alternating dithieno[3,2‐b:6,7‐b]carbazole and 4,4′‐dihexadecyl‐2,2′‐bithiophene units have been designed and synthesized. Upon thermal annealing, they can form ordered thin films in which the polymer backbones dominantly adopted an edge‐on orientation respective to the substrate with a lamellar spacing of ≈24 Å and a π‐stacking distance of ≈3.7 Å. Organic thin‐film transistors (OTFTs) were fabricated by solution casting. A hole mobility of 0.39 cm² V⁻¹s⁻¹ has been demonstrated with P‐tCzC16. This value is the highest among the CPs containing heteroacenes larger than 4 rings.     

Aromatic Ring‐Fused Carborane‐Based Luminescent π‐Conjugated Polymers

A series of π‐conjugated polymers linked by benzocarborane (1,2‐(buta‐1′,3′‐diene‐1′,4′‐diyl)‐1,2‐dicarbadodecaborane) were synthesized via Sonogashira–Hagihara polycondensation reaction. The opened molecular structure of diiodo monomer containing benzocarborane resulted in fast polymerization and high molecular weights. The obtained polymers were fully characterized by ¹H, ¹³C, and ¹¹B NMR spectroscopies. UV‐vis absorption and photoluminescence studies revealed the acceptor‐profile of benzocarborane. Unlike the polymers linked by o‐carborane, these polymers exhibited strong luminescence in the solution state, presumably because the inductive effect of carborane is dominant, rather than cage‐π interactions.

     

A Conjugated Polymer Containing Arylazopyrazole Units in the Side Chains for Field‐Effect Transistors Optically Tunable by Near Infra‐Red Light

Optically tunable field‐effect transistors (FETs) with near infra‐red (NIR) light show promising applications in various areas. Now, arylazopyrazole groups are incorporated in the side chains of a semiconducting donor–acceptor (D‐A) polymer. The cis–trans interconversion of the arylazopyrazole can be controlled by 980 nm and 808 nm NIR light irradiation, by utilizing NaYF₄:Yb,Tm upconversion nanoparticles and the photothermal effect of conjugated D‐A polymers, respectively. This reversible transformation affects the interchain packing of the polymer thin film, which in turn reversibly tunes the semiconducting properties of the FETs by the successive 980 nm and 808 nm light irradiation. The resultant FETs display fast response to NIR light, good resistance to photofatigue, and stability in storage for up to 120 days. These unique features will be useful in future memory and bioelectronic wearable devices.     

Dithienylmethanone‐Based Cross‐Conjugated Polymer Semiconductors: Synthesis,Characterization, and Application in Field‐Effect Transistors

Herein, we report the synthesis, characterization, and field‐effect properties of two cross‐conjugated dithienylmethanone (DMO)‐based alternating polymers, namely, PDMO‐S and PDMO‐Se . Both polymers possess high thermal stability, good solubility, and broad absorption spectra. Their electrochemical properties were investigated using cyclic voltammetry, indicating that PDMO‐Se has higher HOMO/LUMO energy levels of −5.49/−3.49 eV than −5.57/−3.58 eV of PDMO‐S . The two polymers exhibited promising charge transport properties with the highest hole mobility of 0.12 cm² V⁻¹ s⁻¹ for PDMO‐S and 0.025 cm² V⁻¹ s⁻¹ for PDMO‐Se . AFM and 2D‐GIXRD analyses demonstrated that the PDMO‐S formed lamellar, edge‐on packing thin film with close π‐π stacking. These findings suggest that cross‐conjugated polymers might be potential semiconducting materials for low‐cost and flexible organic electronics. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1012–1019     

Spiropyran Main‐Chain Conjugated Polymers

The first main‐chain conjugated copolymers based on alternating spiropyran (SP) and 9,9‐dioctylfluorene (F8) units synthesized via Suzuki polycondensation (SPC) are presented. The reaction conditions of SPC are optimized to obtain materials of type P(para‐SP‐F8) with appreciably high molecular weights up to M _w ≈ 100 kg mol⁻¹. ¹³C NMR is used to identify the random orientation of the non‐symmetric SP unit in P(p‐SP‐F8). Ultrasound‐induced isomerization of P(p‐SP‐F8) to the corresponding merocyanine form P(p‐MC‐F8) yields a deep‐red solution. This isomerization reaction is followed by ¹H NMR in solution using sonication, whereby the color increasingly changes to deep red. The possibility to incorporate multiple SP units into main‐chain polymers significantly broadens existing SP‐based polymeric architectures.     

新型共轭聚合物的设计合成及其在场效应晶体管的应用

近年来,有机场效应晶体管(OFETs)由于在柔性器件和可穿戴电子学中的潜在应用受到了学术界和工业界的普遍关注,尤其是以聚合物半导体材料构筑的晶体管性能得到了快速的发展.如何设计合成用于OFETs的高性能聚合物半导体材料,一直是我们的追求目标.然而,分子结构对迁移率的影响仍缺少系统的比较.本文综述了近年来国内外新型聚合物材料的最新进展.我们按照材料的种类以及载流子的传输类型进行了分类,对高性能聚合物材料的发展过程、材料的设计思路以及相应的FETs性能进行了系统地归纳总结.通过研究分子及分子聚集态结构与器件性能之间的关系,希望为以后设计合成新型的高性能的聚合物材料提供有益的借鉴和指导.     

Amphiphilic Hybrid π‐Conjugated Polymers Containing Polyhedral Oligomeric Silsesquioxanes

Amphiphilic hybrid π‐conjugated polymers that have polyhedral oligomeric silsesquioxanes on their side chains have been successfully synthesized by the Sonogashira–Hagihara polycondensation reaction. The obtained polymers were studied with ultraviolet‐visible absorption and photoluminescence spectra. In these polymers, the π‐conjugation length was extended along the poly(p‐phenylene‐ethynylene) backbone. Furthermore, the content of the POSS substituents can influence the aggregation behavior of the polymers and subsequent luminescent properties.

     

Fluorescence‐Amplifying Assay for Irradiated DNA Lesions Using Water‐Soluble Conjugated Polymers

A new platform has been developed for DNA lesion detection using a cationic conjugated polymer (CCP). DNA that contains two adjacent thymine bases is irradiated with ultraviolet light to allow for the formation of cyclobutane pyrimidine dimers and pyrimidine–pyrimidone dimers. The DNA lesions block the primer extension, and the base labeled with fluorescein cannot be incorporated into the DNA strand. Addition of the CCP leads to inefficient fluorescence resonance energy transfer (FRET) from CCP to fluorescein. For the case without DNA lesions, successful primer extension allows for efficient FRET between them. In view of the FRET signal changes, the DNA lesions can be detected. This new protocol offers a convenient detection for DNA lesions in aqueous solution without any isolation and washing steps.

     

Orienting Semi‐Conducting π‐Conjugated Polymers

The present review focuses on the recent progress made in thin film orientation of semi‐conducting polymers with particular emphasis on methods using epitaxy and shear forces. The main results reported in this review deal with regioregular poly(3‐alkylthiophene)s and poly(dialkylfluorenes). Correlations existing between processing conditions, macromolecular parameters and the resulting structures formed in thin films are underlined. It is shown that epitaxial orientation of semi‐conducting polymers can generate a large palette of semi‐crystalline and nanostructured morphologies by a subtle choice of the orienting substrates and growth conditions.

     

Water‐Soluble Conjugated Polymers for Fluorescent‐Enzyme Assays

Enzyme assays are receiving more and more research and application interest because of the rapidly increasing demands of clinical diagnosis, environmental analysis, drug discovery, and molecular biology. Water‐soluble light‐harvesting conjugated polymers (CPs) coordinate the action of a large number of absorbing units to afford an amplified fluorescence signal, which makes them useful as optical platforms in highly sensitive chemical and biological sensors. This Feature Article highlights recent developments of water‐soluble CPs for fluorescent assays of enzymes. Different signal transduction mechanisms, such as electron transfer, fluorescence resonance energy transfer (FRET), and aggregation or conformation changes of CPs, are employed in these assays according to the dissimilar nature of enzymes. Potential challenges and future research directions in these approaches based on CPs are also discussed.

     

Electronic Properties and Field‐Effect Transistors of Thiophene‐Based Donor–Acceptor Conjugated Copolymers

Summary: The thiophene‐quinoxaline donor–acceptor conjugated copolymer poly[(thiophene‐2,5‐diyl‐alt‐(2,3‐diheptylquinoxaline‐5,8‐diyl)] (PTHQx) was explored as a semiconductor in thin‐film organic field‐effect transistors (OFETs). A hole mobility of 3.6 × 10⁻³ cm² · V⁻¹ · s⁻¹ and an on/off current ratio of 6 × 10⁵ were observed in p‐channel OFETs made from spin‐coated PTHQx thin films. The electronic structures of PTHQx and a related thiophene‐thienopyrazine donor–acceptor copolymer were calculated by density functional theory. Atomic force microscopy of PTHQx thin films showed a polycrystalline grain morphology that varied with the substrate.

Output (left) and transfer (right) characteristics of a PTHQx (structure shown) organic field‐effect transistor.     

A Fluorescence Ratiometric Protein Assay Using Light‐Harvesting Conjugated Polymers

Summary: A highly selective protein assay was created which combines the fluorescent ratiometric technique based on FRET with the light‐harvesting properties of conjugated polymers. The cationic poly[(9,9‐bis(6′‐N,N,N‐trimethylammonium)‐hexyl)‐fluorene phenylene] bromide (PFP‐NMe) and the negatively charged biotinylated fluorescein probe (Fl‐B) were used to detect the target protein streptavidin optically. The strong electrostatic interactions between PFP‐NMe and fluorescein result in efficient FRET from PFP‐NMe to fluorescein. In the presence of streptavidin, however, the biotin moiety of Fl‐B specifically associates with streptavidin and the fluorescein molecule is buried deeply in the adjacent vacant binding sites. This separates the fluorescein spatially from the PFP‐NMe moiety, resulting in inefficient FRET from PFP‐NMe to fluorescein. Although a nonspecific protein, such as BSA, shows nonspecific interactions with PFP‐NMe, it does not affect the fluorescent ratio value of PFP‐NMe to fluorescein. Hence, the charged neutral complex of two oppositely charged conjugated polymers can eliminate the nonspecific interactions, and thus optimize their application in protein assays.

A schematic representation of the protein assay operation.     

Multifunctional Non‐Viral Delivery Systems Based on Conjugated Polymers

Multifunctional nanomaterials with simultaneous therapeutic and imaging functions explore new strategies for the treatment of various diseases. Conjugated polymers (CPs) are considered as novel candidates to serve as multifunctional delivery systems due to their high fluorescence quantum yield, good photostability, and low cytotoxicity. Highly sensitive sensing and imaging properties of CPs are well reviewed, while the applications of CPs as delivery systems are rarely covered. This feature article mainly focuses on CP‐based multifunctional non‐viral delivery systems for drug, protein, gene, and cell delivery. Promising directions for the further development of CP‐based delivery systems are also discussed.

     

Increasing the Open‐Circuit Voltage in High‐Performance Organic Photovoltaic Devices through Conformational Twisting of an Indacenodithiophene‐Based Conjugated Polymer

A fused ladder indacenodithiophene (IDT)‐based donor–acceptor (D–A)‐type alternating conjugated polymer, PIDTHT‐BT, presenting n‐hexylthiophene conjugated side chains is prepared. By extending the degree of intramolecular repulsion through the conjugated side chain moieties, an energy level for the highest occupied molecular orbital (HOMO) of –5.46 eV – a value approximately 0.27 eV lower than that of its counterpart PIDTDT‐BT – is obtained, subsequently providing a fabricated solar cell with a high open‐circuit voltage of approximately 0.947 V. The hole mobility (determined using the space charge‐limited current model) in a blend film containing 20 wt% PIDTHT‐BT) and 80 wt% [6,6]‐phenyl‐C₇₁ butyric acid methyl ester (PC₇₁BM) is 2.2 × 10^–9 m² V^–1 s^–1, which is within the range of reasonable values for applications in organic photovoltaics. The power conversion efficiency is 4.5% under simulated solar illumination (AM 1.5G, 100 mW cm^–2).