On‐chip generation of monodisperse giant unilamellar lipid vesicles containing quantum dots

Monodispersed lipid vesicles have been used as a drug delivery vehicle and a biochemical reactor. To generate monodispersed lipid vesicles in the nano‐ to micrometer size range, an extrusion step should be included in conventional hand‐shaking method of lipid vesicle synthesis. In addition, lipid vesicles as a drug carrier still need to be improved to effectively encapsulate concentrated biomolecules such as cells, proteins, and target drugs. To overcome these limitations, this paper reports a new microfluidic platform for continuous synthesis of small‐sized (～10 μm) giant unilamellar vesicles (GUVs) containing quantum dots (QDs) as a nanosized model drug. To generate GUVs, we introduced an additional cross‐flow to break vesicles into small size. 1,2 ‐ dimyristoyl‐sn‐glycero ‐ 3 ‐ phosphocholine (DMPC) in an octanol–chloroform mixture was used in the construction of self‐assembled membrane. Consequently, we have successfully demonstrated the fabrication of monodispersed GUVs with 7?12 μm diameter containing QDs. The proposed synthesis method of cell‐sized GUVs would be highly desirable for applications such as multipurpose drug encapsulation and delivery.     

Visualization and Quantification of Transmembrane Ion Transport into Giant Unilamellar Vesicles

Transmembrane ion transporters (ionophores) are widely investigated as supramolecular agents with potential for biological activity. Tests are usually performed in synthetic membranes that are assembled into large unilamellar vesicles (LUVs). However transport must be followed through bulk properties of the vesicle suspension, because LUVs are too small for individual study. An alternative approach is described whereby ion transport can be revealed and quantified through direct observation. The method employs giant unilamellar vesicles (GUVs), which are 20–60 μm in diameter and readily imaged by light microscopy. This allows characterization of individual GUVs containing transporter molecules, followed by studies of transport through fluorescence emission from encapsulated indicators. The method provides new levels of certainty and relevance, given that the GUVs are similar in size to living cells. It has been demonstrated using a highly active anion carrier, and should aid the development of compounds for treating channelopathies such as cystic fibrosis.     

Photodamage in a Mitochondrial Membrane Model Modulated by the Topology of Cationic and Anionic Meso‐Tetrakis Porphyrin Free Bases

The photodynamic effects of the cationic TMPyP (meso‐tetrakis [N‐methyl‐4‐pyridyl]porphyrin) and the anionic TPPS4 (meso‐tetrakis[4‐sulfonatophenyl]porphyrin) against PC/CL phosphatidylcholine/cardiolipin (85/15%) membranes were probed to address the influence of phorphyrin binding on lipid damage. Electronic absorption spectroscopy and zeta potential measurements demonstrated that only TMPyP binds to PC/CL large unilamellar vesicles (LUVs). The photodamage after irradiation with visible light was analyzed by dosages of lipid peroxides (LOOH) and thiobarbituric reactive substance and by a contrast phase image of the giant unilamellar vesicles (GUVs). Damage to LUVs and GUVs promoted by TMPyP and TPPS4 were qualitatively and quantitatively different. The cationic porphyrin promoted damage more extensive and faster. The increase in LOOH was higher in the presence of D₂O, and was impaired by sodium azide and sorbic acid. The effect of D₂O was higher for TPPS4 as the photosensitizer. The use of DCFH demonstrated that liposomes prevent the photobleaching of TMPyP. The results are consistent with a more stable TMPyP that generates long‐lived singlet oxygen preferentially partitioned in the bilayer. Conversely, TPPS4 generates singlet oxygen in the bulk whose lifetime is increased in D₂O. Therefore, the affinity of the porphyrin to the membrane modulates the rate, type and degree of lipid damage.     

Point‐to‐Plane Nonhomogeneous Electric‐Field‐Induced Simultaneous Formation of Giant Unilamellar Vesicles (GUVs) and Lipid Tubes

It is well‐known that homogeneous electric fields can be used to generate giant unilamellar vesicles (GUVs). Herein we report an interesting phenomenon of formation of GUVs and lipid tubes simultaneously using a nonhomogeneous electric field generated by point‐to‐plane electrodes. The underlying mechanism was analyzed using finite element analysis. The two forces play main roles, that is, the pulling force (F) to drag GUVs into lipid tubes induced by fluid flow, and the critical force (Fc) to prevent GUVs from deforming into lipid tubes induced by electric fields. In the center area underneath the needle electrode, the GUVs were found because F is less than Fc in that region, whereas in the edge area the lipid tubes were obtained because F is larger than Fc. The diffusion coefficient of lipid in the tubes was found to be 4.45 μm² s^?1 using a fluorescence recovery after photobleaching (FRAP) technique. The method demonstrated here is superior to conventional GUV or lipid tube fabrication methods, and has great potential in cell mimic or hollow material fabrication using GUVs and tubes as templates.     

Size control of giant unilamellar vesicles prepared from inverted emulsion droplets

The production of giant lipid vesicles with controlled size and structure will be an important technology in the design of quantitative biological assays in cell-mimetic microcompartments. For establishing size control of giant vesicles, we investigated the vesicle formation process, in which inverted emulsion droplets are transformed into giant unilamellar vesicles (GUVs) when they pass through an oil/water interface. The relationship between the size of the template emulsion and the converted GUVs was studied using inverted emulsion droplets with a narrow size distribution, which were prepared by microfluidics. We successfully found an appropriate centrifugal acceleration condition to obtain GUVs that had a desired size and narrow-enough size distribution with an improved yield so that emulsion droplets can become the template for GUVs.     

Controlled hydrogel formation in the internal compartment of giant unilamellar vesicles

The introduction of poly(ethylene dioxythiophene) (PEDOT)/poly(styrene sulfonate) (PSS) polyelectrolyte into giant unilamellar phospholipid vesicles (GUVs) and cross-linking with Ca2+ ions to generate a hydrogel within the internal compartment are reported. The aqueous colloidal suspension of PEDOT with excess PSS was microinjected into the internal compartment of liposomes as well as networks of GUVs and lipid nanotubes. The subsequent introduction of calcium ions as cross-linking agent in order to induce hydrogel formation was achieved by three different methods: vesicle fusion, electroporation, and direct microinjection. Gel formation was probed by coinjection of fluorescent nanoparticles and tracking of Brownian motion. Particle mobility was shown to be distinctly reduced in the gel-filled vesicles. Diffusion constants for the particles were calculated from the projected movement of the particles and compared to particles in reference gels and solutions.     

Efficient formation of giant liposomes through the gentle hydration of phosphatidylcholine films doped with sugar

Giant liposomes, or giant vesicles, are cell-size (approximately 5-100 microm) compartments enclosed with phospholipid bilayers, and have often been used in biological research. They are usually generated using hydration methods, "electroformation" and "gentle hydration (or natural swelling)", in which dry lamellar films of phospholipids are hydrated with aqueous solutions. In gentle hydration, however, giant liposomes are difficult to prepare from an electrostatically neutral phospholipid because lipid lamellae cannot repel each other. In this study, we demonstrate the efficient formation of giant liposomes using the gentle hydration of neutral phospholipid (dioleoyl phosphatidylcholine, DOPC) dry films doped with nonelectrolytic monosaccharides (glucose, mannose, and fructose). A mixture of DOPC and such a sugar in an organic solvent (chloroform/methanol) was evaporated to form the films, which were then hydrated with distilled water or Tris buffers containing sodium chloride. Under these conditions, giant liposomes spontaneously formed rapidly and assumed a swollen cell-sized spherical shape with low lamellarity, whereas giant liposomes from pure DOPC films had multilamellar lipid layers, miscellaneous shapes and smaller sizes. This observation indicates that giant unilamellar vesicles (GUVs) of DOPC can be obtained efficiently through the gentle hydration of sugar-containing lipid dry films because repulsion between lipid lamellae is enhanced by the osmosis induced by dissolved sugar.     

Osmotically Shrunken LIPOCEST Agents: An Innovative Class of Magnetic Resonance Imaging Contrast Media Based on Chemical Exchange Saturation Transfer

The peculiar properties of osmotically shrunken liposomes acting as magnetic resonance imaging–chemical exchange saturation transfer (MRI–CEST) contrast agents have been investigated. Attention has been primarily devoted to assessing the contribution arising from encapsulated and incorporated paramagnetic lanthanide(III)‐based shift reagents in determining the chemical shift of the intraliposomal water protons, which is a relevant factor for generating the CEST contrast. It is demonstrated that a highly shifted resonance for the encapsulated water can be attained by increasing the percentage of the amphiphilic shift reagent incorporated in the liposome bilayer. It is also demonstrated that the shift contribution arising from the bulk magnetic susceptibility can be optimized through the modulation of the osmotic shrinkage. In terms of sensitivity, it is shown that the saturation transfer efficiency can be significantly improved by increasing the size of the vesicle, thus allowing a high number of exchangeable protons to be saturated. In addition, the role played by the intensity of the saturating radiofrequency field has also been highlighted.     

A Molecular Rotor that Measures Dynamic Changes of Lipid Bilayer Viscosity Caused by Oxidative Stress

Oxidation of cellular structures is typically an undesirable process that can be a hallmark of certain diseases. On the other hand, photooxidation is a necessary step of photodynamic therapy (PDT), a cancer treatment causing cell death upon light irradiation. Here, the effect of photooxidation on the microscopic viscosity of model lipid bilayers constructed of 1,2‐dioleoyl‐sn‐glycero‐3‐phosphocholine has been studied. A molecular rotor has been employed that displays a viscosity‐dependent fluorescence lifetime as a quantitative probe of the bilayer's viscosity. Thus, spatially‐resolved viscosity maps of lipid photooxidation in giant unilamellar vesicles (GUVs) were obtained, testing the effect of the positioning of the oxidant relative to the rotor in the bilayer. It was found that PDT has a strong impact on viscoelastic properties of lipid bilayers, which ‘travels’ through the bilayer to areas that have not been irradiated directly. A dramatic difference in viscoelastic properties of oxidized GUVs by Type I (electron transfer) and Type II (singlet oxygen‐based) photosensitisers was also detected.     

Hypelcin A,an α-aminoisobutyric acid containing antibiotic peptide,induced fusion of egg yolk-l-α-phosphatidylcholine small unilamellar vesicles

Hypelcin A, an α-aminoisobutyric acid-containing antibiotic peptide inducing fusion of egg yolk-l-α-phosphatidylcholine (egg PC) small unilamellar vesicles (SUVs), was investigated by lipid-mixing assay based on resonanceenergy transfer between fluorescent probes, electron microscopy, light scattering, and¹H-nuclear magnetic-resonance spectroscopy. At a high peptide-to-lipid ratio of approximately 1:5, the peptide fuses several SUVs of 20–30 nm in diameter into a 40–100 nm vesicle. Under mild conditions where the permeability enhancement (leakage of a trapped fluorescent dye, calcein) of lipid bilayers are observed (peptide to lipid ratios around 1/100), the fusion of the SUVs also occurs, although the fusion requires a somewhat larger amount of the peptide than the leakage does. Furthermore, at higher lipid concentrations, where the aggregation step is sufficiently rapid, the fusion rate is determined by the amount of the membrane bound peptide per lipid molecule, as is the leakage rate. In contrast, for egg PC large unilamellar vesicles (110 nm), hypelcin A induces the leakage, but not the fusion. We conclude that the leakage is not due to the fusion.     

Electroformation in a flow chamber with solution exchange as a means of preparation of flaccid giant vesicles

A recently described technique [Estes and Mayer, Biochim. Biophys. Acta 1712 (2005) 152-160] for the preparation of giant unilamellar vesicles (GUVs) in solutions with high ionic strength is examined. By observing a series of osmotic swellings followed by vesicle bursts upon a micropipette transfer of a single POPC GUV from a sucrose solution into an iso-osmolar glycerol solution, a value for the permeability of POPC membrane for glycerol, P=(2.09+/-0.82) x 10(-8)m/s, has been obtained. Based on this result, an alternative mechanism is proposed for the observed exchange of vesicle interior. With modifications, the method of Estes and Mayer is then applied to preparation of flaccid GUVs.     

Supported lipid bilayer formation by the giant vesicle fusion induced by vesicle–surface electrostatic attractive interaction

The effect of the electrostatic attractive force between giant unilamellar vesicles (GUVs) and the SiO₂ surface on the formation of a Ca²⁺-free supported lipid bilayer (SLB) was investigated by atomic force microscopy and fluorescence microscopy. When negatively charged GUVs were incubated for 1 h without Ca²⁺, the surface coverage of lipid bilayer was <1% on the SiO₂ surface. In contrast, a high coverage was obtained without addition of Ca²⁺ on the positively charged surface modified by aminopropyldimethylethoxysilane, and the coverage of SLBs decreased with increasing KCl concentrations. The thickness of the water layer under SLB was reduced by modification of APS.     

Crystalline protein domains and lipid bilayer vesicle shape transformations

Cellular membranes can take on a variety of shapes to assist biological processes including endocytosis. Membrane-associated protein domains provide a possible mechanism for determining membrane curvature. We study the effect of tethered streptavidin protein crystals on the curvature of giant unilamellar vesicles (GUVs) using confocal, fluorescence, and differential interference contrast microscopy. Above a critical protein concentration, streptavidin domains align and percolate as they form, deforming GUVs into prolate spheroidal shapes in a size-dependent fashion. We propose a mechanism for this shape transformation based on domain growth and jamming. Osmotic deflation of streptavidin-coated GUVs reveals that the relatively rigid streptavidin protein domains resist membrane bending. Moreover, in contrast to highly curved protein domains that facilitate membrane budding, the relatively flat streptavidin domains prevent membrane budding under high osmotic stress. Thus, crystalline streptavidin domains are shown to have a stabilizing effect on lipid membranes. Our study gives insight into the mechanism for protein-mediated stabilization of cellular membranes.     

Aqueous Self‐Assembly of Y‐Shaped Amphiphilic Block Copolymers into Giant Vesicles

The preparation and aqueous self‐assembly of newly Y‐shaped amphiphilic block polyurethane (PUG) copolymers are reported here. These amphiphilic copolymers, designed to have two hydrophilic poly(ethylene oxide) (PEO) tails and one hydrophobic alkyl tail via a two‐step coupling reaction, can self‐assemble into giant unilamellar vesicles (GUVs) (diameter ≥ 1000 nm) with a direct dissolution method in aqueous solution, depending on their Y‐shaped structures and initial concentrations. More interesting, the copolymers can self‐assemble into various distinct nano‐/microstructures, such as spherical micelles, small vesicles, and GUVs, with the increase of their concentrations. The traditional preparation methods of GUVs generally need conventional amphiphilic molecules and additional complicated conditions, such as alternating electrical field, buffer solution, or organic solvent. Therefore, the self‐assembly of Y‐shaped PUGs with a direct dissolution method in aqueous solution demonstrated in this study supplies a new clue to fabricate GUVs based on the geometric design of amphiphilic polymers.

     

DNA-Based Artificial Receptors as Transmembrane Signal Transduction Systems for Protocellular Communication

The ability to reproduce signal transduction and cellular communication in artificial cell systems is significant in synthetic protobiology. Here, we describe an artificial transmembrane signal transduction through low pH-mediated formation of the i-motif and dimerization of DNA-based artificial membrane receptors, which is coupled to the occurrence of fluorescence resonance energy transfer and the activation of G-quadruplex/hemin-mediated fluorescence amplification inside giant unilamellar vesicles. Moreover, an intercellular signal communication model is established when the extravesicular H⁺ input is replaced by coacervate microdroplets, which activate the dimerization of the artificial receptors, and subsequent fluorescence production or polymerization in giant unilamellar vesicles. This study represents a crucial step towards designing artificial signalling systems with environmental response, and provides an opportunity to establish signalling networks in protocell colonies.     

Biomembrane Interactions of Functionalized Cryptophane‐A: Combined Fluorescence and 129Xe NMR Studies of a Bimodal Contrast Agent

Fluorescent derivatives of the ¹²⁹Xe NMR contrast agent cryptophane‐A were obtained by functionalization with near infrared fluorescent dyes DY680 and DY682. The resulting conjugates were spectrally characterized, and their interaction with giant and large unilamellar vesicles of varying phospholipid composition was analyzed by fluorescence and NMR spectroscopy. In the latter, a chemical exchange saturation transfer with hyperpolarized ¹²⁹Xe (Hyper‐CEST) was used to obtain sufficient sensitivity. To determine the partitioning coefficients, we developed a method based on fluorescence resonance energy transfer from Nile Red to the membrane‐bound conjugates. This indicated that not only the hydrophobicity of the conjugates, but also the phospholipid composition, largely determines the membrane incorporation. Thereby, partitioning into the liquid‐crystalline phase of 1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphocholine was most efficient. Fluorescence depth quenching and flip‐flop assays suggest a perpendicular orientation of the conjugates to the membrane surface with negligible transversal diffusion, and that the fluorescent dyes reside in the interfacial area. The results serve as a basis to differentiate biomembranes by analyzing the Hyper‐CEST signatures that are related to membrane fluidity, and pave the way for dissecting different contributions to the Hyper‐CEST signal.     

Rapid access to phospholipid analogs using thiol-yne chemistry

Phospholipids and glycolipids constitute an essential part of biological membranes, and are of tremendous fundamental and practical interest. Unfortunately, the preparation of functional phospholipids, or synthetic analogs, is often synthetically challenging. Here we utilize thiol-yne click chemistry methodology to gain access to phospho- and glycolipid analogs. Alkynyl hydrophilic head groups readily photoreact with numerous thiol modified lipid tails to yield the appropriate dithioether phospho- or glycolipids. The resulting structures closely resemble the structure and function of native diacylglycerolipids. Dithioether phosphatidylcholines (PCs) are suitable for forming giant unilamellar vesicles (GUV), which can be used as vessels for cell-free expression systems. The unnatural thioether linkages render the lipids resistant to phospholipase A2 hydrolysis. We utilize the improved stability of these lipids to control the shrinkage of GUVs composed of a mixture of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and dioleyl-dithioether PC, concentrating encapsulated nanoparticles. We imagine that these readily accessible lipids could find a number of applications as natural lipid substitutes.     

Membrane fusion of giant unilamellar vesicles of neutral phospholipid membranes induced by La3+

Membrane fusions of vesicles of biomembranes play various important roles in cells, but their mechanisms are unclear and controversial. In the present study, we found that 30 microM to 1 mM La3+ induced membrane fusion of two giant unilamellar vesicles (GUVs) composed of a mixture of dioleoylphosphatidylcholine (DOPC) and dipalmitoleoylphosphatidylethanolamine (DPOPE). We succeeded in observing a process of this membrane fusion in detail. First, two GUVs became strongly associated, with a partition membrane between them composed of two bilayers, one from each GUV. Then, the partition membrane was suddenly broken at one site on its edge. The area of this breakage site gradually spread, until it was completely separated from the GUV to complete the membrane fusion. Here, we propose a new model (i.e., the partition breakage model) for the mechanism of La3+ -induced membrane fusion of GUVs.     

Reversible Morphological Evolution of Responsive Giant Vesicles to Nanospheres by the Self‐Assembly of Crystalline‐b‐Coil Polyphosphazene Block Copolymers

The preparation of long‐term‐stable giant unilamellar vesicles (GUVs, diameter ≥1000 nm) and large vesicles (diameter ≥500 nm) by self‐assembly in THF of the crystalline‐b‐coil polyphosphazene block copolymers [N=P(OCH₂CF₃)₂]_n‐b‐[N=PMePh]_m ( 4 a : n=30, m=20; 4 b : n=90, m=20; 4 c : n=200, m=85), which combine crystalline [N=P(OCH₂CF₃)₂] and amorphous [N=PMePh] blocks, both of which are flexible, is reported. SEM, TEM, and wide‐angle X‐ray scattering experiments demonstrated that the stability of these GUVs is induced by crystallization of the [N=P(OCH₂CF₃)₂] blocks at the capsule wall of the GUVS, with the [N=PMePh] blocks at the corona. Higher degrees of crystallinity of the capsule wall are found in the bigger vesicles, which suggests that the crystallinity of the [N=P(OCH₂CF₃)₂] block facilitates the formation of large vesicles. The GUVs are responsive to strong acids (HOTf) and, after selective protonation of the [N=PMePh] block, they undergo a morphological evolution to smaller spherical micelles in which the core and corona roles have been inverted. This morphological evolution is totally reversible by neutralization with a base (NEt₃), which regenerates the original GUVs. The monitoring of this process by dynamic light scattering allowed a mechanism to to be proposed for this reversible morphological evolution in which the block copolymer 4 a and its protonated form 4 a⁺ are intermediates. This opens a route to the design of reversibly responsive polymeric systems in organic solvents. This is the first reversibly responsive vesicle system to operate in organic media.     

Fabrication of Thickness‐Controllable Micropatterned Polyelectrolyte‐Film/Nanoparticle Surfaces by Using the Plasma Oxidation Method

We have demonstrated a novel way to form thickness‐controllable polyelectrolyte‐film/nanoparticle patterns by using a plasma etching technique to form, first, a patterned self‐assembled monolayer surface, followed by layer‐by‐layer assembly of polyelectrolyte‐films/nanoparticles. Octadecyltrimethoxysilane (ODS) and (3‐aminopropyl)triethoxysilane (APTES) self‐assembled monolayers (SAMs) were used for polyelectrolyte‐film and nanoparticle patterning, respectively. The resolution of the proposed patterning method can easily reach approximately 2.5 μm. The height of the groove structure was tunable from approximately 2.5 to 150 nm. The suspended lipid membrane across the grooves was fabricated by incubating the patterned polyelectrolyte groove arrays in solutions of 1,2‐dioleoyl‐sn‐glycero‐3‐phosphocholine (DOPC) giant unilamellar vesicles (GUVs). The method demonstrated here reveals a new path to create patterned 2D or 3D structures.