A novel pyridinium hemicyanine dye with carboxylate anchoring group and its application in dye-sensitized solar cells

A novel organic dye with N-substituted pyridinium as the acceptor and carboxylate as the anchoring group were designed and synthesized for dye-sensitized solar cells, which give solar energy-to-electricity conversion efficiency (η) of up to 3.47% in comparison with the reference Ru-complex (N719 dye) with an η value of 5.27% under similar experimental conditions. This new dye is simple in structure, very easy to synthesize, and gives high V_oc.     

Performance of CeO2–TiO2-admixed photoelectrode for natural dye-sensitized solar cell

Extracts from roots of Beta vulgaris were used as natural sensitizers of a wide-bandgap semiconductor (CeO₂–TiO₂) in photoelectrochemical solar cells. The natural dye, adsorbed onto the semiconductor surface, absorbs visible light and promotes electron transfer across the dye/semiconductor interface. We have applied CeO₂–TiO₂ to natural dye sensitizer solar cells as a photoelectrode to reduce the charge recombination rate by providing energy barrier at the interface between the photoanode and electrolyte which offers an improvement of photovoltaic efficiency. Short-circuit current density (J _sc) and open-circuit voltages (V _oc) of 9.0 mA cm^?2 and 680 mV, respectively, were obtained, and an effective energy conversion efficiency of 3.5?% was achieved. This simple and cheap technique of cell preparation opens up a perspective of commercial feasibility for inexpensive and environment-friendly dye cells.     

Application of meso-CF3-Fluorophore BODIPY with Phenyl and Pyrazolyl Substituents for Lifetime Visualization of Lysosomes

A bright far-red emitting unsymmetrical meso-CF₃-BODIPY fluorescent dye with phenyl and pyrazolyl substituents was synthesized by condensation of trifluoropyrrolylethanol with pyrazolyl-pyrrole, with subsequent oxidation and complexation of the formed dipyrromethane. This BODIPY dye exhibits optical absorption at λ_ab ≈ 610–620 nm and emission at λ_em ≈ 640–650 nm. The BODIPY was studied on Ehrlich carcinoma cells as a lysosome-specific fluorescent dye that allows intravital staining of cell structures with subsequent real-time monitoring of changes occurring in the cells. It was also shown that the rate of uptake by cells, the rate of intracellular transport into lysosomes, and the rate of saturation of cells with the dye depend on its concentration in the culture medium. A concentration of 5 μM was chosen as the most suitable BODIPY concentration for fluorescent staining of living cell lysosomes, while a concentration of 100 μM was found to be toxic to Ehrlich carcinoma cells.     

High-contrast and real-time visualization of membrane proteins in live cells with malachite green-based fluorogenic probes

Imaging dynamics of membrane proteins of live cells in a wash-free and real-time manner has been a challenging task. Herein, we report unprecedented applications of malachite green(MG), an organic dye widely used in pigment industry, as a switchable fluorophore to monitor membrane enzymes or noncatalytic proteins in live cells. Conformationally flexible MG is non-fluorescent in aqueous solution, yet covalent binding with endogenous proteins of cells significantly enhances its fluorescence at 670...     

Effect of organic dye on the performance of dye-sensitized solar cell utilizing TiO2 nanostructure films synthesized via CTAB-assisted liquid phase deposition technique

This work is concerned with the growth of TiO₂ nanostructures as photovoltaic materials of dyesensitized solar cell (DSSC) via phase liquid deposition technique treated with CTAB surfactant. This work investigates the influence of organic dyes, N719, N3 and Z907 as photosensitizer on the photovoltaic parameters of TiO₂ nanostructures dye-sensitized solar cells (DSSCs). It also highlights the effect of the concentration of the best dye, N719 on the performance of the cell. The platinum films as counter electrode of the DSSC were prepared by sputtering platinum pellet on ITO substrate. The redox couple of the electrolyte utilized in the DSSC was iodide/triiodide. The cell sensitized with N719 dye demonstrated the best performance compared with the cell sensitized with another two dyes, N3 and Z907. This is due to N719 dye possess the highest optical absorption in visible region. The cell sensitized with 0.8 mM N719 dye performs the highest short-circuit current density, J _sc and power conversion efficiency, η since it posses the highest absorption in visible region. The DSSC utilizing 0.8 mM N719 dye demonstrated the highest J _sc and η of 6.48 mA cm^?2 and 1.69%, respectively.     

Performance of dye-sensitized solar cells based on various sensitizers applied on TiO2-Nb2O5 core/shell photoanode structure

The present investigation described the performance of dye-sensitized solar cells (DSSCs) based on various sensitizers applied on TiO₂-Nb₂O₅ core/shell photoanode film. The novel photoanodes were prepared using composite of TiO₂ nanoparticles (TNPs) and TiO₂ nanorods (TNRs) as core (TNPRs) layer with Nb₂O₅ shell coating. As well, tantalum pentoxide (Ta₂O₅), a blocking layer applied over the core/shell film. The DSSCs were fabricated based on various sensitizers namely zinc phthalocyanine, indoline, indigo carmine, zinc porphyrin, N719, coumarin NKX-2700, polymer dye, quantum dots (QDs), perylene and squaraine. The I–V characteristics of the DSSCs, photocurrent density (Jsc), open-circuit voltage (Voc), fill factor (FF), and photoconversion efficiency (PCE) were determined under illumination of AM 1.5 G. Electrochemical impedance spectroscopy (EIS) analysis is carried out to study the charge transport and life-time of charge carriers at photoanode/dye/electrolyte interface of the DSSCs. The I–V and EIS results explicated that the core/shell with blocking layers were able to alleviate the electron transport and suppressed charge recombination at photoanode/dye/electrolyte interface of the DSSCs. Concerning the sensitizers, PCE of the DSSCs exemplify the order N719 > zinc porphyrin > coumarin NKX-2700 > indoline > squaraine > QDs > zinc phthalocyanine > perylene > polymer dye > indigo carmine dye. The results of the present work demonstrated that among the sensitizers studied, N719 showed the highest PCE and fill factor. Besides, the metal-free organic sensitizers (coumarin NKX-2700 and indoline) exhibited comparable PCE as compared to N719.     

Fabrication of highly efficient dye-sensitized solar cell and CO2 reduction photocatalyst using TiO2 nanoparticles prepared by spin coating-assisted sol–gel method

A sol?Cgel method was applied for fabrication of nanocrystalline anatase TiO₂ thin films on ITO glass substrates and followed by rapid thermal annealing for application as the work electrode for dye-sensitized solar cells (DSSC). TiO₂ nanoparticles were characterized by X-ray diffraction (XRD) pattern and scanning electron microscopy (SEM) and the absorption of dye on the TiO₂ electrode was shown by UV?Cvis spectroscopy. By controlling different parameters including numbers of coated layers, the gap between two electrodes, sensitization time, and light source power, TiO₂-based solar cells with high efficiency was achieved. The results show that a five time spin-coated TiO₂ electrode with applying sealant and sensitization time of 24?h in N3 dye under illumination of 100?W?cm^?2 tungsten lamp give the optimum power conversion efficiency (??) of 6.61%. The increases in thickness of TiO₂ films by increasing the numbers of coated layers can improve adsorption of the N3 dye through TiO₂ layers to increase the open-circuit voltage (V _oc). However, short-circuit photocurrents (J _sc) of DSSCs with a one-coated layer of TiO₂ films are smaller than those of DSSCs with five-coated layer of TiO₂ films. It could be due to the fact that the increased thickness of TiO₂ thin films also resulted in a decrease in the transmittance of TiO₂ thin films. Also, this electrode was employed to photoreduce CO₂ with H₂O under tungsten lamp as light source.     

Raman spectroscopic study of dye adsorption on TiO2 electrodes of dye-sensitized solar cells

The state of dye adsorption on TiO₂ electrodes in dye-sensitized solar-cell (DSSC) systems is important for its power-conversion efficiency (PCE). We propose a non-destructive and quantitative method to evaluate the amount of adsorbed dye on TiO₂ electrodes by using micro-Raman spectroscopy. The Raman peak intensity ratio of adsorbed dye to TiO₂, I_d/I_t, is defined as a dye adsorption parameter. Based on a comparison between I_d/I_t and the amount of dye evaluated from UV–vis absorption, the quantitativity and reproducibility of our method are verified.We investigated the change of I_d/I_t spatial distribution of TiO₂ electrodes immersed in a dye solution for different time scales. The statistical analysis of I_d/I_t distribution suggests that dyes adsorbed on TiO₂ electrodes with chemical coordination increase at first, and after their saturation, dye aggregations are formed over the chemisorption layer. We also describe the effect of the I_d/I_t distribution on PCE. From a comparison of PCE and I_d/I_t distribution obtained from various immersion processes, it was considered that the PCE of DSSCs can be optimized by minimizing the I_d/I_t dispersion.     

Recent progress in interface modification for dye-sensitized solar cells

Interface modification on the TiO₂/dye/electrolyte interface of dye-sensitized solar cells (DSCs) is one of the most effective approaches to suppress the charge recombination, improve electron injection and transportation, and thus ameliorate the conversion efficiency and stability of DSCs. Conventional research focusing on the photoanodes interface modification before sensitization in dye-sensitized solar cells has been carried out and reviewed. However, recent studies showed that post-modification after sensitization of the TiO₂ electrode also plays a significant role on the TiO₂/dye/electrolyte interface. This post-modification using the immersing method could deprotonate dye molecules, prohibit the dye aggregation and retard the recombination reaction. As a result, it has great influence on the devices’ photovoltaic performance. This interface modification could also provide an approach to broaden the response of the solar spectrum by introducing an alternative assembling structure. An in-situ meaning of using a co-adsorbent is employed to modify the interface in the DSCs, which could retard the aggregation of the dye molecules and enhance the conversion efficiency. In addition, electrolyte additives can be used to modify the TiO₂/dye/electrolyte interface through some unique mechanisms. Based on the background of interface modification of photoanodes before sensitization, this review introduces various interface modifications after sensitization of dye-sensitized solar cells and their mechanisms.     

Preparation and crystal structure of a triple parallel interpenetrated copper coordination polymer based on a flexible bis(imidazole) ligand

A Cu(II) coordination polymer, [Cu(L)(bdc)] _n (L = 1,4-bis(imidazole)butane, bdc = 1,3-benzenedicarboxylate) has been hydrothermally synthesized and characterized by elemental analysis, IR spectrum, thermogravimetric analysis, and single-crystal X-ray diffraction. The complex is a rare example of a threefold parallel interpenetrated coordination bonding network based on undulant [Cu₄(μ ₂-L)₂(μ ₂-bdc)₂] parallelograms with 4⁴-sql layer. The heterogeneous catalytic activity of the complex was tested for the degradation of Congo red azo dye in a Fenton-like process in which the degradation efficiency reached 94 % after 100 min. Kinetic analysis indicates that the degradation rate of the dye can be approximated by pseudo-first-order kinetics.     

Anthracene based organic dipolar compounds for sensitized solar cells

Organic dyes that consist of an anthracene moiety between a triphenylamine donor group and a cyanoacrylic acid acceptor group displayed remarkable solar-to-energy conversion efficiency in dye-sensitized solar cells. The planar geometry of anthracene and its bulky substituents helped the dyes to form a high quality monolayer on the surface of TiO₂. A typical device made with the dye AN-Bu displayed a maximal photon-to-current conversion efficiency (IPCE) 65% in the region of 350–510 nm, a short-circuit photocurrent density (J_sc) 12.78 mA cm⁻², an open-circuit photovoltage (V_oc) 0.73 V, and a fill factor (FF) 0.67, corresponding to an overall conversion efficiency 6.23%. In an experiment of using deoxycholic acid (DCA) as a co-absorbent, the values of V_oc stayed in a similar range, yet the values of J_sc were reduced in ca. 11% due to a decrease of loading amounts. This result indicated that the quality of the dye films cannot be further improved by the adding of DCA. The photophysical properties were analyzed with the aid of a time-dependent density functional theory (TDDFT) model with the B3LYP functional.     

Organic sensitizers with different thiophene units as conjugated bridges: molecular engineering and photovoltaics

Three structural modifications with incorporation of alkyl,alkoxy and vinyl bond into the skeleton of thiophene bridge in D-π-A featured organic sensitizers are specifically developed for insight into their influences on photophysical,electrochemical as well as photovoltaic properties in nanocrystalline TiO_2-based dye sensitized solar cells(DSSCs).The insertion of vinyl bond into the conjugation bridge leads to the molecular planar configuration,and the conjugation bridge of 3,4-ethylenedioxythiophene(EDOT)is prone to positively shift its highest occupied molecular orbital(HOMO).The electrochemical impedance spectroscopy(EIS)results indicate that the grafted long alkyl chain onto thiophene is favorable to suppress dye aggregation when adsorbed onto TiO_2film and modification on interface of TiO_2/dye/electrolyte,resulting in a relatively high open-circuit voltage(V_(oc)).Under optimized conditions,dye LS-4 bearing hexylthiophene as the conjugation bridge shows a relatively high overall conversion efficiency of5.45%,with a photocurrent of 11.61 mA cm~(-2),V_(oc)of 744 mV.     

Nanotheranostic fabrication of iron oxide for rapid photocatalytic degradation of organic dyes and antifungal potential

This research work includes the fabrication of iron oxide nanoparticles (Fe₂O₃ NPs) by green construction approach using Wisteria sinensis leaves extract. Due to its eco-friendly approach, the synthesis of iron oxide NPs (Fe₂O₃ NPs) using various plant sources, such as plant parts, and microbial cells have gained a lot of attention in recent years. Cost-effectiveness and ease of availability make Wisteria sinensis leaves extract a potential candidate for the construction of iron oxide NPs. The various key features like biocompatibility, non-toxicity capping, and stabilizing agents present in biological sources are advantageous for usage in a variety of applications. The phytoconstituents present in the leaf extract of Wisteria sinensis serve as reducing and stabilizing agents. The biologically fabricated (Fe₂O₃ NPs) were analyzed using FT-IR, XRD, UV–vis spectroscopy, and SEM. In the present work, the antioxidant and photocatalytic dye degradation efficiency of Fe₂O₃ NPs has been studied. The dye degradation efficiency of methylene blue dye was found to be 87% at 180 min upon exposure to sunlight. The capacity of Fe₂O₃ NPs to scavenge 2,2-diphenyl-1-picrylhydrazyl hydrate free radicals (DPPH) was examined using a UV–Vis spectrophotometer. The study compared the radical scavenging activity (RSA) of Fe₂O₃ nanoparticles (NPs) with that of the standard antioxidant ascorbic acid. The results demonstrated that Fe₂O₃ NPs have a greater ability to scavenge radicals than ascorbic acid. The half-maximal inhibitory concentration (IC50) of Fe₂O₃ NPs was observed to range from 0.12 to 0.17. Furthermore, Fe₂O₃ NPs displayed the highest antifungal activity, with an inhibition zone of 26.8 mm against F. oxysporum. These findings suggest that the biologically synthesized Fe₂O₃ NPs possess potent antimicrobial and dye degradation properties.     

New thieno[3,2-b]indole conjugates with 5-(methylene)rhodanine-3-acetic acid in dye-sensitized solar cells

Five new dyes with D–π–A structure bearing 5-(methylene)-rhodanine-3-acetic acid as an acceptor-anchoring part and thieno[3,2-b]indole or benzo[g]thieno[3,2-b]indole as an electron-donating part were synthesized and applied as photosensitizers for dye-sensitized solar cells (DSSCs). In addition, thermal stability, optical and electrochemical properties of these dyes were investigated. The highest PCE value of 1.09% (J_sc = 3.01 mA cm^–2, V_oc = 0.53 V, FF = 0.69) was achieved for DSSC based on benzo[g]thieno[3,2-b]indole dye under AM 1.5G irradiation.     

Novel D-π-A type II organic sensitizers for dye sensitized solar cells

Four organic donor-π-conjugated-acceptor (D-π-A) type II dyes with different thiophene linkers are reported for dye sensitized solar cells (DSSCs). For the first time, a donor (triphenylamine) was introduced in type II sensitizers, and 2-hydroxybenzonitrile as acceptor/anchoring moiety was covalently linked TiO₂ particles. The dye LS203 in this series gives the best solar energy conversion efficiency of 3.4%, with J_sc = 7.4 mA cm⁻², V_oc = 0.67 V, FF = 0.69, the maximum IPCE value reaches 66.9%.     

Synthesis,characterization, and properties of antibacterial dye based on chitosan

A new low-molecular-weight antibacterial dye was obtained by reaction of Reactive Blue 19 and chitosan previously hydrolyzed with H₂O₂. The compounds were characterized by Fourier-transform infrared spectroscopy, ¹³C solid-state nuclear magnetic resonance, X-ray photoelectron spectroscopy, X-ray diffraction analysis, and antibacterial, solubility, and dyeing performance tests including color difference and fastness. The results show that chitosan dyes were generated with covalent bonds between carbon and nitrogen atoms via reaction of alkene group of dye and primary amine group of chitosan. According to solubility tests, the solubility of the chitosan dye was controlled by the molecular weight of chitosan. In addition, compared with Reactive Blue 19, the antibacterial property of the chitosan dye was increased against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. Besides, chitosan dye demonstrated better lightfastness and waterfastness than the original dye. Therefore, chitosan dye provides a new perspective for improving decorative and antimicrobial properties of wood products.     

Photocatalytic efficiency of TiO2/poly[acrylamide-co-(acrylic acid)] composite for textile dye degradation

A novel photocatalytically degradable TiO₂/poly[acrylamide-co-(acrylic acid)] composite hydrogel (TiO₂/poly[AAm-co-AAc]) was synthesized by polymerization in an aqueous solution with N,N’-methylenebisacrylamide as the crosslinker and ammonium persulphate and TEMED as the initiator pair. The combined and separate effects of photodegradation and adsorption processes for dye removal were evaluated using methylene blue (MB) as the model dye for a photodegradation target, and compared with those of the neat poly[AAm-co-AAc], and a commercially available TiO₂ photocatalyst (Degussa P-25). Without photodegradation (i.e. in the dark), the TiO₂/poly[AAm-co-AAc] composite adsorbed up to 85% of the MB from a 5 mg L⁻¹ MB solution in 15 min compared to only 10% for the pristine TiO₂. The reproducibility in photodegradation of the reused poly[AAm-co-AAc] composite was also investigated, where poly[AAm-co-AAc] was found to be photocatalytically degraded under UV irradiation. Therefore, the TiO₂/poly[AAm-co-AAc] composite hydrogel is a good dye adsorber with self-photodegradability and it also can easily be separated from the reaction by simple filtration. With these properties, the TiO₂/poly[AAm-co-AAc] hydrogel can be called a green polymer for use in the photodegradation-adsorption process for the abatement of various pollutants.     

meso-C6F5 substituted BODIPYs with distinctive spectroscopic properties and their application for bioimaging in living cells

A series of meso-C₆F₅ BODIYs have been successfully synthesized and characterized. Some of them displayed excellent spectroscopic properties, such as relatively large Stokes shift, high fluorescence quantum yield, far-red or near infrared region (NIR) emission, and good photostability. In particular, the dye functionalized with oligo(ethylene glycol) ether-phenyl groups at the 3,5-position of BODIPY core became water-soluble and its emission located in the NIR region with large Stokes shift. Time-dependent density functional theory calculations were conducted to understand the structure–optical properties relationship. Furthermore, cell staining tests demonstrated that the meso-C₆F₅ BODPY derivative with oligo(ethylene glycol) ether-phenyl group was membrane permeable and selectively stained cytosol in living cells.     

Characterization and Thermal Study of Schiff-Base Monomers and Its Transition Metal Polychelates and Their Photovoltaic Performance on Dye Sensitized Solar Cells

Azo dye monomer 4,4′-(4,4′-biphenylylenebisazo)-disalicylaldehyde-4n-butylphenyl aniline (H₂A) is synthesised by the reaction of 4,4′-bis[(salicylaldehyde-5)-azo]biphenyl (Azo) and n-butylaniline in the 1:2 molar ratio and its metal polychelates are also synthesized with Co(II), Ni(II), Cu(II), and Zn(II) metal ions. The synthesized compounds are characterized by ¹H, ¹³C NMR, Fourier transform infrared (FT-IR) spectroscopy, electronic spectra (UV-Vis), elemental analysis (C, H, N, O), gas chromatography-mass (GCmass) spectrometry, magnetic susceptibility and molar conductivity techniques. Thermal properties of the title compounds are studied using the thermogravimetric analysis (TGA). The metal molar ratio in all of the polychelates is found to be consistent with 1:1 (metal/ligand) stoichiometry. The influence of organic dyes H₂A and the [CuA(H₂O)₂] _n polychelate are investigated as photosensitizers on the photovoltaic parameters by current–voltage (I–V) measurements on TiO₂ photoelectrode dye sensitized solar cells (DSSCs). The [CuA(H₂O)₂] _n metal polychelate demonstrates the best performance as compared to the cell sensitized with H₂A.     

Solanum nigrum and Eclipta alba leaf pigments for dye sensitized solar cell applications

The dye sensitized solar cells have been assembled by using natural dye extracted from Solanum nigrum and Eclipta alba. The solar cell constructed using the S. nigrum sensitized TiO₂ photo-electrode exhibited a short-circuit photocurrent of 4.46 mA/cm² and a power conversion efficiency of 0.77 % and that of E. alba sensitized TiO₂ photo-electrode exhibited a short-circuit photocurrent of 4.04 mA/cm² and a power conversion efficiency of 0.60 %. S. nigrum gave better photosensitization effect than E. alba and presents the prospect to be used as an environment-friendly, low-cost alternative system.