Emergent Catalytic Behavior of Self‐Assembled Low Molecular Weight Peptide‐Based Aggregates and Hydrogels

We report a series of short peptides possessing the sequence (FE)_n or (EF)_n and bearing l ‐proline at their N‐terminus that self‐assemble into high aspect ratio aggregates and hydrogels. We show that these aggregates are able to catalyze the aldol reaction, whereas non‐aggregated analogues are catalytically inactive. We have undertaken an analysis of the results, considering the accessibility of catalytic sites, pK_a value shifts, and the presence of hydrophobic pockets. We conclude that the presence of hydrophobic regions is indeed relevant for substrate solubilization, but that the active site accessibility is the key factor for the observed differences in reaction rates. The results presented here provide an example of the emergence of a new chemical property caused by self‐assembly, and support the relevant role played by self‐assembled peptides in prebiotic scenarios. In this sense, the reported systems can be seen as primitive aldolase I mimics, and have been successfully tested for the synthesis of simple carbohydrate precursors.     

Surface‐Assisted Self‐Assembly Strategies Leading to Supramolecular Hydrogels

Localized molecular self‐assembly processes leading to the growth of nanostructures exclusively from the surface of a material is one of the great challenges in surface chemistry. In the last decade, several works have been reported on the ability of modified or unmodified surfaces to manage the self‐assembly of low‐molecular‐weight hydrogelators (LMWH) resulting in localized supramolecular hydrogel coatings mainly based on nanofiber architectures. This Minireview highlights all strategies that have emerged recently to initiate and localize LMWH supramolecular hydrogel formation, their related fundamental issues and applications.     

Tunable Pentapeptide Self‐Assembled β‐Sheet Hydrogels

Oligopeptide‐based supramolecular hydrogels hold promise in a range of applications. The gelation of these systems is hard to control, with minor alterations in the peptide sequence significantly influencing the self‐assembly process. We explored three pentapeptide sequences with different charge distributions and discovered that they formed robust, pH‐responsive hydrogels. By altering the concentration and charge distribution of the peptide sequence, the stiffness of the hydrogels could be tuned across two orders of magnitude (2–200 kPa). Also, through reassembly of the β‐sheet interactions the hydrogels could self‐heal and they demonstrated shear‐thin behavior. Using spectroscopic and cryo‐imaging techniques, we investigated the relationship between peptide sequence and molecular structure, and how these influence the mechanical properties of the hydrogel. These pentapeptide hydrogels with tunable morphology and mechanical properties have promise in tissue engineering, injectable delivery vectors, and 3D printing applications.     

Nanostructured Micelle Nanotubes Self‐Assembled from Dinucleobase Monomers in Water

Despite the central importance of aqueous amphiphile assemblies in science and industry, the size and shape of these nano‐objects is often difficult to control with accuracy owing to the non‐directional nature of the hydrophobic interactions that sustain them. Here, using a bioinspired strategy that consists of programming an amphiphile with shielded directional Watson–Crick hydrogen‐bonding functions, its self‐assembly in water was guided toward a novel family of chiral micelle nanotubes with partially filled lipophilic pores of about 2 nm in diameter. Moreover, these tailored nanotubes are successfully demonstrated to extract and host molecules that are complementary in size and chemical affinity.     

An Easy Access to Organic Salt‐Based Stimuli‐Responsive and Multifunctional Supramolecular Hydrogels

By exploiting orthogonal hydrogen bonding involving supramolecular synthons and hydrophobic/hydrophilic interactions, a new series of simple organic salt based hydrogelators derived from pyrene butyric acid and its β‐alanine amide derivative, and various primary amines has been achieved. The hydrogels were characterised by microscopy, table‐top rheology and dynamic rheology. FTIR, variable‐temperature ¹H NMR and emission spectroscopy established the role of various supramolecular interactions such as hydrogen bonding and π–π stacking in hydrogelation. Single‐crystal X‐ray diffraction (SXRD) studies supported the conclusion that orthogonal hydrogen bonding involving amide–amide and primary ammonium monocarboxylate (PAM) synthons indeed played a crucial role in hydrogelation. The hydrogels were found to be stimuli‐responsive and were capable of sensing ammonia and adsorbing water‐soluble dye (methylene blue). All the hydrogelators were biocompatible (MTT assay in RAW 264.7 cells), indicating their suitability for use in drug delivery.     

Advantages of Catalysis in Self‐Assembled Molecular Capsules

Control over the local chemical environment of a molecule can be achieved by encapsulation in supramolecular host systems. In supramolecular catalysis, this control is used to gain advantages over classical homogeneous catalysis in bulk solution. Two of the main advantages concern influencing reactions in terms of substrate and product selectivity. Due to size and/or shape recognition, substrate selective conversion can be realized. Additionally, noncovalent interactions with the host environment facilitate alternative reaction pathways and can yield unusual products. This Concept article discusses and highlights literature examples utilizing self‐assembled molecular capsules to achieve catalytic transformations displaying a high degree of substrate and/or product selectivity. Furthermore, the advantage of supramolecular hosts in multicatalyst tandem reactions is covered.     

Water‐Regulated Self‐Assembly Structure Transformation and Gelation Behavior Prediction Based on a Hydrazide Derivative

Herein, we report the water‐regulated supramolecular self‐assembly structure transformation and the predictability of the gelation ability based on an azobenzene derivative bearing a hydrazide group, namely, N‐(3,4,5‐tributoxyphenyl)‐N′‐4‐[(4‐hydroxyphenyl)azophenyl] benzohydrazide (BNB‐t4). The regulation effects are demonstrated in the morphological transformation from spherical to lamellar particles then back to spherical in different solvent ratios of n‐propanol/water. The self‐assembly behavior of BNB‐t4 was characterized by minimum gelation concentration, microstructure, thermal, and mechanical stabilities. From the spectroscopy studies, it is suggested that gel formation of BNB‐t4 is mainly driven by intermolecular hydrogen bonding, accompanied with the contribution from π–π stacking as well as hydrophobic interactions. The successfully established correlation between the self‐assembly behavior and solubility parameters yields a facile way to predict the gelation performance of other molecules in other single or mixed solvents.     

Self‐Assembly of Pyridinium‐Tailored Anthracene Amphiphiles into Supramolecular Hydrogels

The mixing of a polyacid cross‐linker with a pyridinium‐functionalized anthracene amphiphile afforded a supramolecular hydrogel through a self‐assembly process that was primarily driven by π‐stacking and electrostatic interactions.     

Gel Sculpture: Moldable,Load‐Bearing and Self‐Healing Non‐Polymeric Supramolecular Gel Derived from a Simple Organic Salt

An easy access to a library of simple organic salts derived from tert‐butoxycarbonyl (Boc)‐protected L ‐amino acids and two secondary amines (dicyclohexyl‐ and dibenzyl amine) are synthesized following a supramolecular synthon rationale to generate a new series of low molecular weight gelators (LMWGs). Out of the 12 salts that we prepared, the nitrobenzene gel of dicyclohexylammonium Boc‐glycinate ( GLY.1 ) displayed remarkable load‐bearing, moldable and self‐healing properties. These remarkable properties displayed by GLY.1 and the inability to display such properties by its dibenzylammonium counterpart ( GLY.2 ) were explained using microscopic and rheological data. Single crystal structures of eight salts displayed the presence of a 1D hydrogen‐bonded network (HBN) that is believed to be important in gelation. Powder X‐ray diffraction in combination with the single crystal X‐ray structure of GLY.1 clearly established the presence of a 1D hydrogen‐bonded network in the xerogel of the nitrobenzene gel of GLY.1 . The fact that such remarkable properties arising from an easily accessible (salt formation) small molecule are due to supramolecular (non‐covalent) interactions is quite intriguing and such easily synthesizable materials may be useful in stress‐bearing and other applications.     

Sequential Assembly of Mutually Interactive Supramolecular Hydrogels and Fabrication of Multi-Domain Materials

A two-component self-sorting hydrogel based on acylhydrazide and carboxylic acid derivatives of 1,3:2,4-dibenzylidene-d -sorbitol (DBS-CONHNH₂ and DBS-COOH) is reported. A heating–cooling cycle induces the self-assembly of DBS-CONHNH₂, followed by the self-assembly of DBS-COOH induced by decreasing pH. Although the networks are formed sequentially, there is spectroscopic evidence of interactions between them, which impact on the mechanical properties and significantly enhance the ability of these low-molecular-weight gelators (LMWGs) to form gels when mixed. The DBS-COOH network can be switched “off” and “on” within the two-component gel through a pH change. By using a photo-acid generator, the two-component gel can be prepared combining the thermal trigger with photo-irradiation. Photo-patterned self-assembly of DBS-COOH within a pre-formed DBS-CONHNH₂ gel under a mask yields spatially controlled multi-domain gels. Different gel domains can have different functions, for example, controlling the rate of release of heparin incorporated into the gel, or directing gold nanoparticle assembly. Such photo-patterned multi-component hydrogels have potential applications in regenerative medicine or bio-nano-electronics.     

Enhanced Thermoelectric Properties of Polyaniline Nanofilms Induced by Self‐Assembled Supramolecules

Polyaniline (PANI) is one of the most promising candidates for flexible organic thermoelectric (TE) applications owing to its relatively low cost and high stability. Herein, the self‐assembled supramolecule (SAS) (3,6‐dioctyldecyloxy‐1,4‐benzenedicarboxylic acid) was used as an additive and was introduced into PANI films as a template. Raman spectroscopy, X‐ray diffraction, and conductive atomic force microscopy analyses demonstrated that the highly ordered chain structure of PANI was achieved by chemical interactions between PANI and the SAS. Moreover, the ordered regions in the PANI‐SAS film increased with a decrease in the film thickness. Consequently, the TE properties of PANI‐SAS films were not only much higher than those of PANI films, but they also increased with a decrease in film thickness. The maximum TE power factor of the PANI‐SAS film reached 31 μW m^?1 K^?2, which is approximately six times higher than the power factor of a PANI film with a similar thickness. This work offers a promising way to prepare PANI thin films with enhanced TE properties.     

Strain Stiffening Hydrogels through Self-Assembly and Covalent Fixation of Semi-Flexible Fibers

Biomimetic, strain-stiffening materials are reported, made through self-assembly and covalent fixation of small building blocks to form fibrous hydrogels that are able to stiffen by an order of magnitude in response to applied stress. The gels consist of semi-flexible rodlike micelles of bisurea bolaamphiphiles with oligo(ethylene oxide) (EO) outer blocks and a polydiacetylene (PDA) backbone. The micelles are fibers, composed of 9–10 ribbons. A gelation method based on Cu-catalyzed azide–alkyne cycloaddition (CuAAC), was developed and shown to lead to strain-stiffening hydrogels with unusual, yet universal, linear and nonlinear stress–strain response. Upon gelation, the X-ray scattering profile is unchanged, suggesting that crosslinks are formed at random positions along the fiber contour without fiber bundling. The work expands current knowledge about the design principles and chemistries needed to achieve fully synthetic, biomimetic soft matter with on-demand, targeted mechanical properties.     

Construction of Alkynylplatinum(II) Bzimpy‐Functionalized Metallacycles and Their Hierarchical Self‐Assembly Behavior in Solution Promoted by Pt⋅⋅⋅Pt and π–π Interactions

A family of new alkynylplatinum(II) 2,6‐bis(benzimidazol‐2′‐yl)pyridine (bzimpy)‐functionalized supramolecular metallacycles with different shapes and sizes have been successfully prepared by coordination‐driven self‐assembly. The obtained metallacycles showed switchable emission and a strong tendency to form intermolecular Pt???Pt and π–π stacking interactions in solution that were not displayed by their individual precursors. Further investigation revealed that the existence of the metallacyclic scaffold at the core could facilitate the formation of intermolecular Pt???Pt and π–π stacking interactions of peripheral alkynylplatinum(II) bzimpy units. Moreover, the shapes and sizes of the metallacyclic scaffold have a significant influence on the hierarchical self‐assembly behavior. Among the three metallacycles, hexagonal metallacycle A , with a relatively small size, could spontaneously self‐assemble into an aromatic guest stimuli‐responsive metallogel at room temperature without a heating–cooling process.     

An “Ingredients” Approach to Functional Self‐Synthesizing Materials: A Metal‐Ion‐Selective,Multi‐Responsive,Self‐Assembled Hydrogel

New methodology for making novel materials is highly desirable. Here, an “ingredients” approach to functional self‐assembled hydrogels was developed. By designing a building block to contain the right ingredients, a multi‐responsive, self‐assembled hydrogel was obtained through a process of template‐induced self‐synthesis in a dynamic combinatorial library. The system can be switched between gel and solution by light, redox reactions, pH, temperature, mechanical energy and sequestration or addition of Mg^II salt.     

Steric‐Structure‐Dependent Gel Formation,Hierarchical Structures,Rheological Behavior,and Surface Wettability

A series of bicholesteryl‐based gelators with different central linker atoms C, N, and O (abbreviated to GC , GN , and GO , respectively) have been designed and synthesized. The self‐assembly processes of these gelators were investigated by using gelation tests, field‐emission scanning electron microscopy, field‐emission transmission electron microscopy, UV/Vis absorption, IR spectroscopy, X‐ray diffraction, rheology, and contact‐angle experiments. The gelation ability, self‐assembly morphology, rheological, and surface‐wettability properties of these gelators strongly depend on the central linker atom of the gelator molecule. Specifically, GC and GN can form gels in three different solvents, whereas GO can only form a gel in N,N‐dimethylformamide (DMF). Morphologies from nanofibers and nanosheets to nanospheres and nanotubes can be obtained with different central atoms. Gels of GC , GN , and GO formed in the same solvent (DMF) have different tolerances to external forces. All xerogels gave a hydrophobic surface with contact angles that ranged from 121 to 152°. Quantum‐chemical calculations indicate that the GC , GN , and GO molecules have very different steric structures. The results demonstrate that the central linker atom can efficiently modulate the molecular steric structure and thus regulate the supramolecular self‐assembly process and properties of gelators.     

Self‐Assembled Peptide‐Based Hydrogels as Scaffolds for Proliferation and Multi‐Differentiation of Mesenchymal Stem Cells

Fluorenyl‐9‐methoxycarbonyl (Fmoc)‐diphenylalanine (Fmoc‐FF) and Fmoc‐arginine‐glycine‐­aspartate (Fmoc‐RGD) peptides self‐assemble to form a 3D network of supramolecular hydrogel (Fmoc‐FF/Fmoc‐RGD), which provides a nanofibrous network that uniquely presents bioactive ligands at the fiber surface for cell attachment. In the present study, mesenchymal stem cells (MSCs) in Fmoc‐FF/Fmoc‐RGD hydrogel increase in proliferation and survival compared to those in Fmoc‐FF/Fmoc‐RGE hydrogel. Moreover, MSCs encapsulated in Fmoc‐FF/Fmoc‐RGD hydrogel and induced in each defined induction medium undergo in vitro osteogenic, adipogenic, and chondrogenic differentiation. For in vivo differentiation, MSCs encapsulated in hydrogel are induced in each defined medium for one week, followed by injection into gelatin sponges and transplantation into immunodeficient mice for four weeks. MSCs in Fmoc‐FF/Fmoc‐RGD hydrogel increase in differentiation into osteogenic, adipogenic, and chondrogenic differentiation, compared to those in Fmoc‐FF/Fmoc‐RGE hydrogel. This study concludes that nanofibers formed by the self‐assembly of Fmoc‐FF and Fmoc‐RGD are suitable for the attachment, proliferation, and multi‐differentiation of MSCs, and can be applied in musculoskeletal tissue engineering.

     

Squalyl Crown Ether Self‐Assembled Conjugates: An Example of Highly Selective Artificial K+ Channels

The natural KcsA K⁺ channel, one of the best‐characterized biological pore structures, conducts K⁺ cations at high rates while excluding Na⁺ cations. The KcsA K⁺ channel is of primordial inspiration for the design of artificial channels. Important progress in improving conduction activity and K⁺/Na⁺ selectivity has been achieved with artificial ion‐channel systems. However, simple artificial systems exhibiting K⁺/Na⁺ selectivity and mimicking the biofunctions of the KcsA K⁺ channel are unknown. Herein, an artificial ion channel formed by H‐bonded stacks of squalyl crown ethers, in which K⁺ conduction is highly preferred to Na⁺ conduction, is reported. The K⁺‐channel behavior is interpreted as arising from discreet stacks of dimers resulting in the formation of oligomeric channels, in which transport of cations occurs through macrocycles mixed with dimeric carriers undergoing dynamic exchange within the bilayer membrane. The present highly K⁺‐selective macrocyclic channel can be regarded as a biomimetic alternative to the KcsA channel.