Isolated Square‐Planar Copper Center in Boron Imidazolate Nanocages for Photocatalytic Reduction of CO2 to CO

Photocatalytic reduction of CO₂ to value‐added fuel has been considered to be a promising strategy to reduce global warming and shortage of energy. Rational design and synthesis of catalysts to maximumly expose the active sites is the key to activate CO₂ molecules and determine the reaction selectivity. Herein, we synthesize a well‐defined copper‐based boron imidazolate cage (BIF‐29) with six exposed mononuclear copper centers for the photocatalytic reduction of CO₂. Theoretical calculations show a single Cu site including weak coordinated water delivers a new state in the conduction band near the Fermi level and stabilizes the *COOH intermediate. Steady‐state and time‐resolved fluorescence spectra show these Cu sites promote the separation of electron–hole pairs and electron transfer. As a result, the cage achieves solar‐driven reduction of CO₂ to CO with an evolution rate of 3334 μmol g^?1 h^?1 and a high selectivity of 82.6 %.     

Eosin Y‐Functionalized Conjugated Organic Polymers for Visible‐Light‐Driven CO2 Reduction with H2O to CO with High Efficiency

Visible‐light‐driven photoreduction of CO₂ to energy‐rich chemicals in the presence of H₂O without any sacrifice reagent is of significance, but challenging. Herein, Eosin Y‐functionalized porous polymers (PEosinY‐N, N=1–3), with high surface areas up to 610 m² g^?1, are reported. They exhibit high activity for the photocatalytic reduction of CO₂ to CO in the presence of gaseous H₂O, without any photosensitizer or sacrifice reagent, and under visible‐light irradiation. Especially, PEosinY‐1 derived from coupling of Eosin Y with 1,4‐diethynylbenzene shows the best performance for the CO₂ photoreduction, affording CO as the sole carbonaceous product with a production rate of 33 μmol g^?1 h^?1 and a selectivity of 92 %. This work provides new insight for designing and fabricating photocatalytically active polymers with high efficiency for solar‐energy conversion.     

Covalent Organic Frameworks for Energy Conversion in Photocatalysis

Intensifying energy crises and severe environmental issues have led to the discovery of renewable energy sources, sustainable energy conversion, and storage technologies. Photocatalysis is a green technology that converts eco-friendly solar energy into high-energy chemicals. Covalent organic frameworks (COFs) are porous materials constructed by covalent bonds that show promising potential for converting solar energy into chemicals owing to their pre-designable structures, high crystallinity, and porosity. Herein, we highlight recent progress in the synthesis of COF-based photocatalysts and their applications in water splitting, CO₂ reduction, and H₂O₂ production. The challenges and future opportunities for the rational design of COFs for advanced photocatalysts are discussed. This Review is expected to promote further development of COFs toward photocatalysis.     

Heterogeneous Molecular Systems for Photocatalytic CO2 Reduction with Water Oxidation

Artificial photosynthesis—reduction of CO₂ into chemicals and fuels with water oxidation in the presence of sunlight as the energy source—mimics natural photosynthesis in green plants, and is considered to have a significant part to play in future energy supply and protection of our environment. The high quantum efficiency and easy manipulation of heterogeneous molecular photosystems based on metal complexes enables them to act as promising platforms to achieve efficient conversion of solar energy. This Review describes recent developments in the heterogenization of such photocatalysts. The latest state‐of‐the‐art approaches to overcome the drawbacks of low durability and inconvenient practical application in homogeneous molecular systems are presented. The coupling of photocatalytic CO₂ reduction with water oxidation through molecular devices to mimic natural photosynthesis is also discussed.     

Coupling Benzylamine Oxidation with CO2 Photoconversion to Ethanol over a Black Phosphorus and Bismuth Tungstate S-Scheme Heterojunction

Photoconversion of CO₂ and H₂O into ethanol is an ideal strategy to achieve carbon neutrality. However, the production of ethanol with high activity and selectivity is challenging owing to the less efficient reduction half-reaction involving multi-step proton-coupled electron transfer (PCET), a slow C−C coupling process, and sluggish water oxidation half-reaction. Herein, a two-dimensional/two-dimensional (2D/2D) S-scheme heterojunction consisting of black phosphorus and Bi₂WO₆ (BP/BWO) was constructed for photocatalytic CO₂ reduction coupling with benzylamine (BA) oxidation. The as-prepared BP/BWO catalyst exhibits a superior photocatalytic performance toward CO₂ reduction, with a yield of 61.3 μmol g⁻¹ h⁻¹ for ethanol (selectivity of 91 %).In situ spectroscopic studies and theoretical calculations reveal that S-scheme heterojunction can effectively promote photogenerated carrier separation via the Bi−O−P bridge to accelerate the PCET process. Meanwhile, electron-rich BP acts as the active site and plays a vital role in the process of C−C coupling. In addition, the substitution of BA oxidation for H₂O oxidation can further enhance the photocatalytic performance of CO₂ reduction to C₂H₅OH. This work opens a new horizon for exploring novel heterogeneous photocatalysts in CO₂ photoconversion to C₂H₅OH based on cooperative photoredox systems.     

Rare‐Earth Single Erbium Atoms for Enhanced Photocatalytic CO2 Reduction

The solar‐driven photocatalytic reduction of CO₂ (CO₂RR) into chemical fuels is a promising route to enrich energy supplies and mitigate CO₂ emissions. However, low catalytic efficiency and poor selectivity, especially in a pure‐water system, hinder the development of photocatalytic CO₂RR owing to the lack of effective catalysts. Herein, we report a novel atom‐confinement and coordination (ACC) strategy to achieve the synthesis of rare‐earth single erbium (Er) atoms supported on carbon nitride nanotubes (Er₁/CN‐NT) with a tunable dispersion density of single atoms. Er₁/CN‐NT is a highly efficient and robust photocatalyst that exhibits outstanding CO₂RR performance in a pure‐water system. Experimental results and density functional theory calculations reveal the crucial role of single Er atoms in promoting photocatalytic CO₂RR.     

Photothermal Conversion of CO2 into CH4 with H2 over Group VIII Nanocatalysts: An Alternative Approach for Solar Fuel Production

The photothermal conversion of CO₂ provides a straightforward and effective method for the highly efficient production of solar fuels with high solar‐light utilization efficiency. This is due to several crucial features of the Group VIII nanocatalysts, including effective energy utilization over the whole range of the solar spectrum, excellent photothermal performance, and unique activation abilities. Photothermal CO₂ reaction rates (mol h^?1 g^?1) that are several orders of magnitude larger than those obtained with photocatalytic methods (μmol h^?1 g^?1) were thus achieved. It is proposed that the overall water‐based CO₂ conversion process can be achieved by combining light‐driven H₂ production from water and photothermal CO₂ conversion with H₂. More generally, this work suggests that traditional catalysts that are characterized by intense photoabsorption will find new applications in photo‐induced green‐chemistry processes.     

Investigation of Structural Evolution of SnO2 Nanosheets towards Electrocatalytic CO2 Reduction

In‐depth understanding of the catalytic active sites is of paramount importance for the design of efficient electrocatalysts for CO₂ conversion. Here we highlight the structural evolution of SnO₂ nanosheets for electrocatalytic CO₂ reduction. The transformation of SnO₂ into metallic Sn would occur on the surface of catalyst during the catalytic process, followed by enhanced selectivity and activity for the conversion of CO₂ to HCOOH. Electrocatalytic characterization and structural analysis demonstrate that the metallic Sn derived from structural evolution plays a dominant role in the CO₂ reduction to HCOOH. This work deepens the understanding of the catalytic mechanism and provides a new pathway for the rational design of advanced electrocatalysts for CO₂ reduction.     

Polyoxometalate-Based Compounds for Photo- and Electrocatalytic Applications

Photo/electrocatalysis of water (H₂O) splitting and CO₂ reduction reactions is a promising strategy to alleviate the energy crisis and excessive CO₂ emissions. For the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and CO₂ reduction reaction (CO₂RR) involved, the development of effective photo/electrocatalysts is critical to reduce the activation energy and accelerate the sluggish dynamics. Polyoxometalate (POM)-based compounds with tunable compositions and diverse structures are emerging as unique photo/electrocatalysts for these reactions as they offer unparalleled advantages such as outstanding solution and redox stability, quasi-semiconductor behaviour, etc. This Minireview provides a basic introduction related to photo/electrocatalytic HER, OER and CO₂RR, followed by the classification of pristine POM-based compounds toward different catalytic reactions. Recent breakthroughs in engineering POM-based compounds as efficient photo/electrocatalysts are highlighted. Finally, the advantages, challenges, strategies and outlooks of POM-based compounds on improving photo/electrocatalytic performance are discussed.     

Quantum Dot Assembly for Light‐Driven Multielectron Redox Reactions,such as Hydrogen Evolution and CO2 Reduction

Light‐driven multielectron redox reactions (e.g., hydrogen (H₂) evolution, CO₂ reduction) have recently appeared at the front of solar‐to‐fuel conversion. In this Minireview, we focus on the recent advances in establishing semiconductor quantum dot (QD) assemblies to enhance the efficiencies of these light‐driven multielectron reduction reactions. Four models of QD assembly are established to promote the sluggish kinetics of multielectron transfer from QDs to cocatalysts, thus leading to an enhanced activity of solar H₂ evolution or CO₂ reduction. We also forecast the potential applications of QD assemblies in other multielectron redox reactions, such as nitrogen (N₂) fixation and oxygen (O₂) evolution from H₂O.     

Rational Design and Application of Covalent Organic Frameworks for Solar Fuel Production

Harnessing solar energy and converting it into renewable fuels by chemical processes, such as water splitting and carbon dioxide (CO₂) reduction, is a highly promising yet challenging strategy to mitigate the effects arising from the global energy crisis and serious environmental concerns. In recent years, covalent organic framework (COF)-based materials have gained substantial research interest because of their diversified architecture, tunable composition, large surface area, and high thermal and chemical stability. Their tunable band structure and significant light absorption with higher charge separation efficiency of photoinduced carriers make them suitable candidates for photocatalytic applications in hydrogen (H₂) generation, CO₂ conversion, and various organic transformation reactions. In this article, we describe the recent progress in the topology design and synthesis method of COF-based nanomaterials by elucidating the structure-property correlations for photocatalytic hydrogen generation and CO₂ reduction applications. The effect of using various kinds of 2D and 3D COFs and strategies to control the morphology and enhance the photocatalytic activity is also summarized. Finally, the key challenges and perspectives in the field are highlighted for the future development of highly efficient COF-based photocatalysts.     

Polyoxometalate-based electron transfer modulation for efficient electrocatalytic carbon dioxide reduction

The electrocatalytic carbon dioxide (CO₂) reduction reaction (CO₂RR) involves a variety of electron transfer pathways, resulting in poor reaction selectivity, limiting its use to meet future energy requirements. Polyoxometalates (POMs) can both store and release multiple electrons in the electrochemical process, and this is expected to be an ideal “electron switch” to match with catalytically active species, realize electron transfer modulation and promote the activity and selectivity of the electrocatalytic CO₂RR. Herein, we report a series of new POM-based manganese-carbonyl (MnL) composite CO₂ reduction electrocatalysts, whereby SiW₁₂–MnL exhibits the most remarkable activity and selectivity for CO₂RR to CO, resulting in an increase in the faradaic efficiency (FE) from 65% (MnL) to a record-value of 95% in aqueous electrolyte. A series of control electrochemical experiments, photoluminescence spectroscopy (PL), transient photovoltage (TPV) experiments, and density functional theory (DFT) calculations revealed that POMs act as electronic regulators to control the electron transfer process from POM to MnL units during the electrochemical reaction, enhancing the selectivity of the CO₂RR to CO and depressing the competitive hydrogen evolution reaction (HER). This work demonstrates the significance of electron transfer modulation in the CO₂RR and suggests a new idea for the design of efficient electrocatalysts towards CO₂RR.

Polyoxometalates as electron regulators to promote the carbonyl manganese (MnL) electrocatalyst for highly efficient CO₂ reduction in aqueous electrolyte.     

Quantum Dot Assembly for Light‐Driven Multielectron Redox Reactions,such as Hydrogen Evolution and CO2 Reduction

Light‐driven multielectron redox reactions (e.g., hydrogen (H₂) evolution, CO₂ reduction) have recently appeared at the front of solar‐to‐fuel conversion. In this Minireview, we focus on the recent advances in establishing semiconductor quantum dot (QD) assemblies to enhance the efficiencies of these light‐driven multielectron reduction reactions. Four models of QD assembly are established to promote the sluggish kinetics of multielectron transfer from QDs to cocatalysts, thus leading to an enhanced activity of solar H₂ evolution or CO₂ reduction. We also forecast the potential applications of QD assemblies in other multielectron redox reactions, such as nitrogen (N₂) fixation and oxygen (O₂) evolution from H₂O.     

Nanostructures for Electrocatalytic CO2 Reduction

One of the most effective ways to cope with the problems of global warming and the energy shortage crisis is to develop renewable and clean energy sources. To achieve a carbon-neutral energy cycle, advanced carbon sequestration technologies are urgently needed, but because CO₂ is a thermodynamically stable molecule with the highest carbon valence state of +4, this process faces many challenges. In recent years, electrochemical CO₂ reduction has become a promising approach to fix and convert CO₂ into high-value-added fuels and chemical feedstock. However, the large-scale commercial use of electrochemical CO₂ reduction systems is hindered by poor electrocatalyst activity, large overpotential, low energy conversion efficiency, and product selectivity in reducing CO₂. Therefore, there is an urgent need to rationally design highly efficient, stable, and scalable electrocatalysts to alleviate these problems. This minireview also aims to classify heterogeneous nanostructured electrocatalysts for the CO₂ reduction reaction (CDRR).     

Photoelectrochemical CO2 Reduction with a Rhenium Organometallic Redox Mediator at Semiconductor/Aqueous Liquid Junction Interfaces

Electrochemical and photoelectrochemical CO₂ reductions were carried out with Re(bh‐bipy)(CO)₃(OH₂) cocatalysts in aqueous electrolytes. Competition between hydrogen evolution and CO₂ reduction was observed under (photo)electrochemical conditions for both glassy carbon and CuInS₂ electrodes. The partial current density for CO generation is limited even though the additional potential is applied. However, electrochemical hydrogen evolution was suppressed under photoelectrochemical conditions, and the selectivity and partial current density for CO were considerably increased when compared to the electrochemical reduction in an identical electrode/electrolyte system. This finding may provide insights into using semiconductor/liquid junctions for solar fuel devices to overcome the limitations of electrolysis systems with an external bias.     

Dispersed Nickel Cobalt Oxyphosphide Nanoparticles Confined in Multichannel Hollow Carbon Fibers for Photocatalytic CO2 Reduction

Materials for high‐efficiency photocatalytic CO₂ reduction are desirable for solar‐to‐carbon fuel conversion. Herein, highly dispersed nickel cobalt oxyphosphide nanoparticles (NiCoOP NPs) were confined in multichannel hollow carbon fibers (MHCFs) to construct the NiCoOP‐NPs@MHCFs catalysts for efficient CO₂ photoreduction. The synthesis involves electrospinning, phosphidation, and carbonization steps and permits facile tuning of chemical composition. In the catalyst, the mixed metal oxyphosphide NPs with ultrasmall size and high dispersion offer abundant catalytically active sites for redox reactions. At the same time, the multichannel hollow carbon matrix with high conductivity and open ends will effectively promote mass/charge transfer, improve CO₂ adsorption, and prevent the metal oxyphosphide NPs from aggregation. The optimized hetero‐metal oxyphosphide catalyst exhibits considerable activity for photosensitized CO₂ reduction, affording a high CO evolution rate of 16.6 μmol h^?1 (per 0.1 mg of catalyst).     

Elemental Boron for Efficient Carbon Dioxide Reduction under Light Irradiation

The photoreduction of CO₂ is attractive for the production of renewable fuels and the mitigation of global warming. Herein, we report an efficient method for CO₂ reduction over elemental boron catalysts in the presence of only water and light irradiation through a photothermocatalytic process. Owing to its high solar‐light absorption and effective photothermal conversion, the illuminated boron catalyst experiences remarkable self‐heating. This process favors CO₂ activation and also induces localized boron hydrolysis to in situ produce H₂ as an active proton source and electron donor for CO₂ reduction as well as boron oxides as promoters of CO₂ adsorption. These synergistic effects, in combination with the unique catalytic properties of boron, are proposed to account for the efficiency of the CO₂ reduction. This study highlights the promise of photothermocatalytic strategies for CO₂ conversion and also opens new avenues towards the development of related solar‐energy utilization schemes.     

Recent Advances in Photocatalytic CO2 Reduction Using Earth‐Abundant Metal Complexes‐Derived Photocatalysts

Photochemical reduction of CO₂ with H₂O into energy‐rich chemicals using inexhaustible solar energy is an appealing strategy to simultaneously address the global energy and environmental issues. Earth‐abundant metal complexes show promising application in this field due to their easy availability, rich redox valence and tunable property. Great progress has been seen on catalytic reduction of CO₂ under visible light illumination employing earth‐abundant metal complexes and their hybrids as key contributors, especially for producing CO and HCOOH via the two‐electron reduction process. In this minireview, we will summarize and update advances on earth‐abundant metal complex‐derived photocatalytic system for visible‐light driven CO₂ photoreduction over the last 5 years. Homogeneous earth‐abundant metal complex photocatalysts and earth‐abundant metal complex derived hybrid photocatalysts were both presented with focus on efficient improvement strategy.     

Solar‐Driven Water–Gas Shift Reaction over CuOx/Al2O3 with 1.1 % of Light‐to‐Energy Storage

Hydrogen production from coal gasification provides a cleaning approach to convert coal resource into chemical energy, but the key procedures of coal gasification and thermal catalytic water–gas shift (WGS) reaction in this energy technology still suffer from high energy cost. We herein propose adopting a solar–driven WGS process instead of traditional thermal catalysis, with the aim of greatly decreasing the energy consumption. Under light irradiation, the CuO_x/Al₂O₃ delivers excellent catalytic activity (122 μmol g_cat^?1 s^?1 of H₂ evolution and >95 % of CO conversion) which is even more efficient than noble‐metal‐based catalysts (Au/Al₂O₃ and Pt/Al₂O₃). Importantly, this solar‐driven WGS process costs no electric/thermal power but attains 1.1 % of light‐to‐energy storage. The attractive performance of the solar‐driven WGS reaction over CuO_x/Al₂O₃ can be attributed to the combined photothermocatalysis and photocatalysis.     

The Application of Graphene and Its Derivatives to Energy Conversion,Storage, and Environmental and Biosensing Devices

Graphene (GR) and its derivatives are promising materials on the horizon of nanotechnology and material science and have attracted a tremendous amount of research interest in recent years. The unique atom‐thick 2D structure with sp² hybridization and large specific surface area, high thermal conductivity, superior electron mobility, and chemical stability have made GR and its derivatives extremely attractive components for composite materials for solar energy conversion, energy storage, environmental purification, and biosensor applications. This review gives a brief introduction of GR's unique structure, band structure engineering, physical and chemical properties, and recent energy‐related progress of GR‐based materials in the fields of energy conversion (e.g., photocatalysis, photoelectrochemical water splitting, CO₂ reduction, dye‐sensitized and organic solar cells, and photosensitizers in photovoltaic devices) and energy storage (batteries, fuel cells, and supercapacitors). The vast coverage of advancements in environmental applications of GR‐based materials for photocatalytic degradation of organic pollutants, gas sensing, and removal of heavy‐metal ions is presented. Additionally, the use of graphene composites in the biosensing field is discussed. We conclude the review with remarks on the challenges, prospects, and further development of GR‐based materials in the exciting fields of energy, environment, and bioscience.