Synthese,Struktur und Reaktivität von Tris‐, Bis‐ und Mono(2,4‐dimethylpentadienyl)‐Komplexen des Neodyms,Lanthans und des Yttriums

The tris(2,4‐dimethylpentadienyl) complexes [Ln(η⁵‐Me₂C₅H₅)₃] (Ln = Nd, La, Y) are obtained analytically pure by reaction of the tribromides LnBr₃·nTHF with the potassium compound K(Me₂C₅H₅)(thf)_n in THF in good yields. The structural characterization is carried out by X‐ray crystal structure analysis and NMR‐spectroscopically. The tris complexes can be transformed into the dimeric bis(2,4‐dimethylpentadienyl) complexes [Ln₂(η⁵‐Me₂C₅H₅)₄X₂] (Ln, X: Nd, Cl, Br, I; La, Br, I; Y, Br) by reaction with the trihalides THF solvates in the molar ratio 2:1 in toluene. Structure and bonding conditions are determined for selected compounds by X‐ray crystal structure analysis and NMR‐spectroscopically in general. The dimer‐monomer equilibrium existing in solution was investigated NMR‐spectroscopically in dependence of the donor strength of the solvent and could be established also by preparation of the corresponding monomer neutral ligand complexes [Ln(η⁵‐Me₂C₅H₅)₂X(L)] (Ln, X, L: Nd, Br, py; La, Cl, thf; Br, py; Y, Br, thf). Finally the possibilities for preparation of mono(2,4‐dimethylpentadienyl)lanthanoid(III)‐dibromid complexes are shown and the hexameric structure of the lanthanum complex [La₆(η⁵‐Me₂C₅H₅)₆Br₁₂(thf)₄] is proved by X‐ray crystal structure analysis.     

Easy One‐Pot Synthesis of 1‐Monosubstituted Aliphatic 1,2,3‐Triazoles from Aliphatic Halides,Sodium Azide and Propiolic Acid by a Click Cycloaddition/Decarboxylation Process

1‐Monosubstituted aliphatic 1,2,3‐triazoles were synthesized by a one‐pot reaction from aliphatic halides (Cl and Br), sodium azide and propiolic acid. The yields ranged from moderate to good. The reaction was easily carried out in DMF with Cs₂CO₃ at 100°C by copper‐catalyzed click cycloaddition/decarboxylation.     

Synthesis of Some New 2‐Oxo‐N‐[(10H‐phenothiazin‐10‐yl)alkyl] Derivatives of Azetidine‐1‐carboxamides

The synthesis of a new series of 4‐aryl‐3‐chloro‐2‐oxo‐N‐[3‐(10H‐phenothiazin‐10‐yl)propyl]azetidine‐1‐carboxamides, 4a – 4m , is described. Phenothiazine on reaction with Cl(CH₂)₃Br at room temperature gave 10‐(3‐chloropropyl)‐10H‐phenothiazine ( 1 ), and the latter reacted with urea to yield 1‐[3‐(10H‐phenothiazin‐10‐yl)propyl]urea ( 2 ). Further reaction of 2 with several substituted aromatic aldehydes led to N‐(arylmethylidene)‐N′‐[3‐(phenothiazin‐10‐yl)propyl]ureas 3a – 3m , which, on treatment with ClCH₂COCl in the presence of Et₃N, furnished the desired racemic trans‐2‐oxoazetidin‐1‐carboxamide derivatives 4a – 4m . The structures of all new compounds were confirmed by IR, and ¹H‐ and ¹³C‐NMR spectroscopy, FAB mass spectrometry, and chemical methods.     

Syntheses and Structures of Trilithium Cyclotriphosphazenates Equipped with 2‐Halo‐aryl Substituents

Hexakis (2‐halo‐anilino) cyclotriphosphazenes (2‐X‐C₆H₄NH)₆P₃N₃ {X = F ( 1d ), Cl ( 1e ), Br ( 1f )} were prepared by refluxing mixtures of hexachloro cyclotriphosphazene, 2‐haloaniline and triethylamine in toluene and characterized by single crystal X‐ray diffraction. 1d , 1e and 1f were reacted with ⁿBuLi in thf. Reactions were monitored with ³¹P NMR. Addition of three equivalents of ⁿBuLi yields lithium complexes of trianionic phosphazenates [{(thf)₂Li}₃{(2‐X‐C₆H₄N)₃(2‐X‐C₆H₄NH)₃P₃N₃}] {X= F ( 2d ), Cl ( 2e ) and Br ( 2f )}. 2d , 2e and 2f were structurally characterized by X‐ray diffraction, which reveals monomeric cis‐metalated phosphazenates featuring central P₃N₃ ring systems of chair conformation. Lithium ions reside in three N(eq)‐P‐N(endo) chelation sites at one face of the P₃N₃ ring system. Li…X distances are rather long (> 3Å) indicating no Li‐X interactions.     

Anion‐ and Solvent‐Induced Assembly and Reversible Structural Transformation of d10‐Metal Coordination Architectures Containing N‐(4‐(4‐Aminophenyloxy)phenyl)isonicotinamide

We set out studies on anion‐ and solvent‐induced assembly based on the ligand N‐(4‐(4‐aminophenyloxy)phenyl)isonicotinamide (papoa), which is synthesized to show a bent and flexible backbone. Reactions of papoa with ZnX₂ (X=Cl, Br, and I) gave the dinuclear macrocycles ([ZnX₂(papoa)]₂; X=Cl ( 1 a ), Br ( 2 a ), I ( 3 )), the structure of which was determined by X‐ray diffraction. Notably, the less bulky Cl and Br compounds afforded the coordinated imine in acetone (i.e., [ZnX₂(papoi)]₂, papoi=N‐(4‐(4‐(propan‐2‐ylideneamino)phenoxy)phenyl)isonicotinamide; X=Cl ( 1 b ), Br ( 2 b )), whereas the iodine one only gave the coordinated amine compound 3 under the same reaction condition. In fact, the coordinated imine can return to the amine analogue upon exposure to air or in DMSO, which has been monitored by ¹H NMR spectroscopy and powder X‐ray diffraction. Both the dinuclear [Zn(papoa)(NO₃)₂]₂ ( 4 a ) and the 1D [Zn(papoa)₂(NO₃)₂]_n ( 4 b ) were formed from the reaction of Zn(NO₃)₂ and papoa in mixed solvents with acetone and acetonitrile, respectively. In addition, Cd(ClO₄)₂ can react with papoa to give the 1D framework {[Cd(papoa)₂(CH₃CN)₂](ClO₄)₂}_n ( 5 a ) and the 2D framework [Cd(papoa)₂(ClO₄)₂]_n ( 5 b ), depending on the solvent used, that is, MeOH and CH₃CN, respectively. Importantly, the 1D framework with axially coordinated CH₃CN molecules and the 2D framework with axially coordinated ClO₄^? ions can be interconverted by heating and grinding in the presence of CH₃CN, respectively. Such a reversible structural transformation process was proven by PXRD studies.     

Cerium‐catalyzed tandem synthesis of 2‐substituted benzothiazoles in PEG

An efficient and convenient condensation reaction of 2‐aminothiophenol with aldehydes catalyzed by a catalytic amount of ceric ammonium nitrate in polyethylene glycol was investigated. As a result, a set of diverse 2‐substituted benzothiazoles such as 2‐phenylbenzothiazole as well as its p‐Me, p‐NO₂, p‐F, p‐Cl, p‐Br, o‐OMe, p‐OMe and 2‐furyl, 2‐pyridyl and styryl derivatives were obtained in good to excellent yields for 5 h at room temperature. Additionally, the catalyst system was recovered and reused several times without evident loss in activity. Copyright © 2011 John Wiley & Sons, Ltd.     

Five‐coordinate dinuclar cobalt (II), copper (II), zinc (II) and cadmium (II) complexes with 4‐bromo‐N‐(2‐pyridinylmethylene)benzenamine: Synthesis,characterisation and methyl methacrylate polymerization

A series of late transition metal complexes, [(bpma)Co(μ – Cl)Cl] ₂ , [(bpma)Cu(μ – Cl)Cl] ₂ , [(bpma)Zn(μ – Cl)Cl] ₂ and [(bpma)Cd(μ – Br)Br] ₂ (where bpma is 4‐bromo‐N‐((pyridin‐2‐yl)methylene)benzenamine) have been synthesized and structurally characterized. The X‐ray structures of dimeric complexes [(bpma)M(μ – X)X] ₂ (M = Co, Cu and Zn, X = Cl; M = Cd, X = Br) showed a distorted 5‐coordinate trigonal bipyramidal geometry involving two nitrogen atoms of N,N‐bidentate ligand, two bridged and one terminal halogen atoms. The complex [(bpma)Cu(μ – Cl)Cl] ₂ revealed the highest catalytic activity for the polymerisation of methyl methacrylate in the presence of modified methylaluminoxane with an activity of 9.14 × 10⁴ g PMMA/mol·Cu·h at 60 °C and afforded syndiotactic poly (methylmethacrylate) (rr = 0.69).     

Poly[μ2‐chloro‐μ2‐1,4‐oxathiane‐κ2S:S‐copper(I)]

The title complex, [CuCl(C₄H₈OS)]_n, contains infinite spiral (CuS)_n chains linked by bridging Cl atoms into layers. The Cl atoms do not form polymeric fragments with Cu^I, but combine into isolated centrosymmetric Cu₂Cl₂ units. The compound is non‐isomorphous with the Br‐containing analogue, which contains Cu₈S₈ rings linked by Br atoms into chains. The O atom of the 1,4‐oxathiane mol­ecule does not realize its coordination abilities in the known copper(I)–halide complexes, while in copper(II)–halide complexes, oxathiane is coordinated via the S and O atoms. This falls into a pattern of the preferred inter­actions, viz. weak acid (Cu^I atom) with weak base (S atom) and harder acid (Cu^II atom) with harder base (O atom).     

Synthesis and Structural Characterization of Metal Complexes of 2‐Formylpyrrole‐4N‐ethylthiosemicarbazone (4 EL1) and 2‐Acetylpyrrole‐4N‐ethylthiosemicarbazone (4 EL2)

The reactions of ⁴N‐ethyl‐2‐[1‐(pyrrol‐2‐yl)methylidene(hydrazine carbothioamide ( 4 EL₁ ) and ⁴N‐ethyl‐2[1‐(pyrrol‐2‐yl)ethylidene(hydrazine carbothioamide ( 4 EL₂ ) with Group 12 metal halides afforded complexes of types [M(L)₂X₂] (M = Zn, Cd; L = 4 EL₁, 4 EL₂; X = Cl, Br, I; 1 – 6 , 14 – 19 ) and [M(L)X₂] (M = Hg; L = 4 EL₁, 4 EL₂; X = Cl, Br, I; 7 – 9 , 20 – 22 ). In addition, reaction of 4 EL₁ with salts of Cu^II, Ni^II, Pd^II and Pt^II afforded compounds of type [M(4 EL₁–H)₂] ( 10 – 13 ). The new compounds were characterized by elemental analysis, FAB mass spectrometry, IR and electronic spectroscopy and, for sufficiently soluble compounds, ¹H, ¹³C and, when appropriate, ¹¹³Cd or ¹⁹⁹Hg NMR spectrometry. The spectral data suggest that in their complexes with Group 12 metal cations, both thiosemicarbazones are neutral and S‐monodentate; and for [Zn(4 EL₁)₂I₂] ( 3 ), [Cd(4 EL₁)₂Br₂] ( 5 ) and [Hg(4 EL₁)Cl₂]₂ ( 7 ) this was confirmed by X‐ray diffractometry. By contrast, in its complexes with Cu^II and Group 10 metal cations, 4 EL₁ is monodeprotonated and S,N‐bidentate, as was confirmed by X‐ray diffractometry for [Ni(4 EL₁–H)₂] ( 11 ) and [Pd(4 EL₁–H)₂] ( 12 ).     

Guest‐, Light‐ and Thermally‐Modulated Spin Crossover in [FeII2] Supramolecular Helicates

A new bis(pyrazolylpyridine) ligand (H₂L) has been prepared to form functional [Fe₂(H₂L)₃]⁴⁺ metallohelicates. Changes to the synthesis yield six derivatives, X@[Fe₂(H₂L)₃]X(PF₆)₂?xCH₃OH ( 1 , x=5.7 and X=Cl; 2 , x=4 and X=Br), X@[Fe₂(H₂L)₃]X(PF₆)₂?yCH₃OH?H₂O ( 1 a , y=3 and X=Cl; 2 a , y=1 and X=Br) and X@[Fe₂(H₂L)₃](I₃)₂?3 Et₂O ( 1 b , X=Cl; 2 b , X=Br). Their structure and functional properties are described in detail by single‐crystal X‐ray diffraction experiments at several temperatures. Helicates 1 a and 2 a are obtained from 1 and 2 , respectively, by a single‐crystal‐to‐single‐crystal mechanism. The three possible magnetic states, [LS–LS], [LS–HS], and [HS–HS] can be accessed over large temperature ranges as a result of the structural nonequivalence of the Fe^II centers. The nature of the guest (Cl^? vs. Br^?) shifts the spin crossover (SCO) temperature by roughly 40 K. Also, metastable [LS–HS] or [HS–HS] states are generated through irradiation. All helicates (X@[Fe₂(H₂L)₃])³⁺ persist in solution.     

Structural and physicochemical characterization of zinc(II) and cadmium(II) complexes with 1,4‐dimethy‐lhomopiperazine

In order to know the relationship between structures and physicochemical properties of Group 12 metal(II) ions, the complexes with ‘simple’ ligands, such as alkyl cyclic diamine ligand and halide ions, were synthesized by the reaction of 1,4‐dimethylhomopiperazine (hp′) with MX₂ as metal sources (M = Zn, Cd; X = Cl, Br, I). The five structural types, [ZnX₂(hp′)] (X = Cl ( 1 ), Br ( 2 ) and I ( 3 )), [ZnX₃(Hhp′)] (X = Cl ( 1′ ) and Br ( 2′ )), [CdCl₂(hp′)]_n ( 4 ), [{CdCl₂(Hhp′)}₂(µ‐Cl)₂] ( 4′ ) and [{CdX(hp′)}₂(µ‐X)₂] (X = Br ( 5 ), I ( 6 )), were determined by X‐ray analysis. The sizes of both metal(II) and halide ions and the difference in each other's polarizability influence each structure. All complexes were characterized by IR, far‐IR, Raman and UV–Vis absorption spectroscopies. In the far‐IR and Raman spectra, the typical ν(M N) and ν(M X) peaks clearly depend on the five structural types around 540–410 cm⁻¹ and 350–160 cm⁻¹ respectively. The UV–Vis absorption band energy around 204–250 nm also reflects each structural type. Copyright © 2005 John Wiley & Sons, Ltd.     

Structures and Properties of Spherical 90‐Vertex Fullerene‐Like Nanoballs

By applying the proper stoichiometry of 1:2 to [Cp^RFe(η⁵‐P₅)] and CuX (X=Cl, Br) and dilution conditions in mixtures of CH₃CN and solvents like CH₂Cl₂, 1,2‐Cl₂C₆H₄, toluene, and THF, nine spherical giant molecules having the simplified general formula [Cp^RFe(η⁵‐P₅)]@[{Cp^RFe(η⁵‐P₅)}₁₂{CuX}₂₅(CH₃CN)₁₀] (Cp^R=η⁵‐C₅Me₅ (Cp*); η⁵‐C₅Me₄Et (Cp^Et); X=Cl, Br) have been synthesized and structurally characterized. The products consist of 90‐vertex frameworks consisting of non‐carbon atoms and forming fullerene‐like structural motifs. Besides the mostly neutral products, some charged derivatives have been isolated. These spherical giant molecules show an outer diameter of 2.24 (X=Cl) to 2.26 nm (X=Br) and have inner cavities of 1.28 (X=Cl) and 1.20 nm (X=Br) in size. In most instances the inner voids of these nanoballs encapsulate one molecule of [Cp*Fe(η⁵‐P₅)], which reveals preferred orientations of π–π stacking between the cyclo‐P₅ rings of the guest and those of the host molecules. Moreover, π–π and σ–π interactions are also found in the packing motifs of the balls in the crystal lattice. Electrochemical investigations of these soluble molecules reveal one irreversible multi‐electron oxidation at E_p=0.615 V and two reduction steps (?1.10 and ?2.0 V), the first of which corresponds to about 12 electrons. Density functional calculations reveal that during oxidation and reduction the electrons are withdrawn or added to the surface of the spherical nanomolecules, and no Cu²⁺ species are involved.     

Phenylimidorhenium(V) Complexes with 1,3‐Diethyl‐4,5‐dimethylimidazole‐2‐ ylidene Ligands

The phenylimidorhenium(V) complexes [Re(NPh)X₃(PPh₃)₂] (X = Cl, Br) react with the N‐heterocyclic carbene (NHC) 1,3‐diethyl‐4,5‐dimethylimidazole‐2‐ylidene (L^Et) under formation of the stable rhenium(V) complex cations [Re(NPh)X(L^Et)₄]²⁺ (X = Cl, Br), which can be isolated as their chloride or [PF₆]^? salts. The compounds are remarkably stable against air, moisture and ligand exchange. The hydroxo species [Re(NPh)(OH)(L^Et)₄]²⁺ is formed when moist solvents are used during the synthesis. The rhenium atoms in all three complexes are coordinated in a distorted octahedral fashion with the four NHC ligands in equatorial planes of the molecules. The Re–C(carbene) bond lengths between 2.171(8) and 2.221(3) Å indicate mainly σ‐bonding between the NHC ligand and the electron deficient d² metal atoms. Attempts to prepare analogous phenylimido complexes from [Re(NPh)Cl₃(PPh₃)₂] and 1,3‐diisopropyl‐4,5‐dimethylimidazole‐2‐ylidene (L^i?Pr) led to a cleavage of the rhenium‐nitrogen multiple bond and the formation of the dioxo complex [ReO₂(L^i?Pr)₄]⁺.     

Halocyclization of Methyl 2‐Alkynylbenzoates to Isocoumarins Using Cupric Halides

Treatment of methyl 2‐alkynylbenzoates with two to three equivalents of CuX₂ (X = Cl or Br) in refluxing acetonitrile gave isocoumarins 2 in good to excellent chemical yields.     

Probing the reactivity of microhydrated α‐nucleophile in the anionic gas‐phase SN2 reaction

To probe the kinetic performance of microsolvated α‐nucleophile, the G2(+)_M calculations were carried out for the gas‐phase S_N2 reactions of monohydrated and dihydrated α‐oxy‐nucleophiles XO^?(H₂O)_{n = 1,2} (X = HO, CH₃O, F, Cl, Br), and α‐sulfur‐nucleophile, HSS^?(H₂O)_{n = 1,2}, toward CH₃Cl. We compared the reactivities of hydrated α‐nucleophiles to those of hydrated normal nucleophiles. Our calculations show that the α‐effect of monohydrated and dihydrated α‐oxy‐nucleophiles will become weaker than those of unhydrated ones if we apply a plot of activation barrier as a function of anion basicity. Whereas the enhanced reactivity of monohydrated and dihydrated ROO^? (R = H, Me) could be observed if compared them with the specific normal nucleophiles, RO^? (R = H, Me). This phenomena can not be seen in the comparisons of XO^?(H₂O)_{n = 1,2} (X = F, Cl, Br) with ClC₂H₄O^?(H₂O)_{n = 1,2}, a normal nucleophile with similar gas basicity to XO^?(H₂O)_{n = 1,2}. These results have been carefully analyzed by natural bond orbital theory and activation strain model. Meanwhile, the relationships between activation barriers with reaction energies and the ionization energies of α‐nucleophile are also discussed. © 2015 Wiley Periodicals, Inc.     

Synthesis of 3,5‐Diarylcyclohex‐2‐enones by NH4Cl/HCl‐Catalyzed Cyclization and Deacetylation of 4‐Acetylhexane‐1,5‐diones

A new route for the synthesis of 3,5‐diarylcyclohex‐2‐enones is reported. The 4‐acetyl‐1,3‐diarylhexane‐1,5‐diones were obtained by the addition of pentane‐2,4‐dione to chalcones. The reaction of 4‐acetyl‐1,3‐diarylhexane‐1,5‐diones with NH₄Cl/HCl in EtOH under reflux conditions gave the 3,5‐diarylcyclohex‐2‐enones in good yields. All synthesized compounds were characterized by spectroscopic methods (¹H‐, ¹³C‐NMR, and IR), and elemental analyses.     

Preparation,Structural Characterization,and Antifungal Activities of Complexes of Group 12 Metals with 2‐Acetylpyridine‐ and 2‐Acetylpyridine‐N‐oxide‐4N‐phenylthiosemicarbazones

Reaction of group 12 metal dihalides in ethanolic media with 2‐acetylpyridine ⁴N‐phenylthiosemicarbazone ( H4PL ) and 2‐acetylpyridine‐N‐oxide ⁴N‐phenylthiosemicarbazone ( H4PLO ) afforded the compounds [M(H4PL)X₂] (X = Cl, Br, M = Zn, Cd, Hg; X = I, M = Zn, Cd) ( 1–8 ), [Hg(4PL)I]₂ ( 9 ) and [M(H4PLO)X₂] (X = Cl, Br, I, M = Zn, Cd, Hg) ( 10–18 ). H4PL , H4PLO and their complexes were characterized by elemental analysis and by IR and ¹H and ¹³C NMR spectroscopy (and the cadmium complexes by ¹¹³Cd NMR spectroscopy), and H4PL , H4PLO , ( 5 · DMSO) and ( 9 ) were additionally studied by X‐ray diffraction. H4PL is N,N,S‐tridentate in all its complexes, including 9 , in which it is deprotonated, and H4PLO is in all cases O,N,S‐tridentate. In all the complexes, the metal atoms are pentacoordinate and the coordination polyhedra are redistorted tetragonal pyramids. In assays of antifungal activity against Aspergillus niger and Paecilomyces variotii, the only compound to show any activity was [Hg(H4PLO)I₂] ( 18 ).     

Influence of Halogen Substitution in the Ligand Sphere on the Antitumor and Antibacterial Activity of Half‐sandwich Ruthenium(II) Complexes [RuX(η6‐arene)(C5H4N‐2‐CH=N‐Ar)]+

New complexes [(η⁶‐p‐cymene)Ru(C₅H₄N‐2‐CH=N–Ar)X]PF₆ [X = Br ( 1 ), I ( 2 ); Ar = 4‐fluorophenyl ( a ), 4‐chlorophenyl ( b ), 4‐bromophenyl ( c ), 4‐iodophenyl ( d ), 2,5‐dichlorophenyl ( e )] were prepared, as well as 3a – 3e (X = Cl) and the new complexes [(η⁶‐arene)RuCl(N‐N)]PF₆ (arene = C₆H₅OCH₂CH₂OH, N‐N = 2,2′‐bipyridine ( 4 ), 2,6‐(dimethylphenyl)‐pyridin‐2‐yl‐methylene amine ( 5 ), 2,6‐(diisopropylphenyl)‐pyridin‐2‐yl‐methylene amine ( 6 ); arene = p‐cymene, N‐N = 4‐(aminophenyl)‐pyridin‐2‐yl‐methylene amine ( 7 )]. X‐ray diffraction studies were performed for 1a , 1b , 1c , 1d , 2b , 5 , and 7 . Cytotoxicities of 1a – 1d and 2 were established versus human cancer cells epithelial colorectal adenocarcinoma (Caco‐2) (IC₅₀: 35.8–631.0 μM), breast adenocarcinoma (MCF7) (IC₅₀: 36.3–128.8.0 μM), and hepatocellular carcinoma (HepG2) (IC₅₀: 60.6–439.8 μM), 3a – 3e were tested against HepG2 and Caco‐2, and 4 – 7 were tested against Caco‐2. 1 – 7 were tested against non‐cancerous human epithelial kidney cells. 1 and 2 were more selective towards tumor cells than the anticancer drug 5‐fluorouracil (5‐FU), but 3a – 3e (X = Cl) were not selective. 1 and 2 had good activity against MCF7, some with lower IC₅₀ than 5‐FU. Complexes with X = Br or I had moderate activity against Caco‐2 and HepG2, but those with Cl were inactive. Antibacterial activities of 1a , 2b , 3a , and 7 were tested against antibacterial susceptible and resistant Gram‐negative and ‐positive bacteria. 1a , 2b , and 3a showed activity against methicillin‐resistant S. aureus (MIC = 31–2000 μg · mL^–1).     

Zur Reaktion der Alkin‐Kupfer(I)‐Komplexe [CuX(S‐Alkin)] (X = Cl,Br, I; S‐Alkin = 3,3,6,6‐Tetramethyl‐1‐thia‐4‐cycloheptin) mit den Phosphanen PMe3 und Ph2PCH2CH2PPh2 (dppe)

Organometallic Compounds of Copper. XVIII. On the Reaction of the Alkyne Copper(I) Complexes [CuX(S‐Alkyne)] (X = Cl, Br, I; S‐Alkyne = 3,3,6,6‐Tetramethyl‐1‐thiacyclohept‐4‐yne) with the Phosphanes PMe₃ and Ph₂PCH₂CH₂PPh₂ (dppe) The alkyne copper(I) halide complexes [CuX(S‐Alkyne)]_n ( 2 ) ( 2 a : X = Cl, 2 b : X = Br, 2 c : X = I; S‐Alkyne = 3,3,6,6‐tetramethyl‐1‐thiacyclohept‐4‐yne; n = 2, ∞) add the phosphanes PMe₃ and Ph₂PCH₂CH₂PPh₂ (dppe) to form the mono‐ and dinuclear copper compounds [(S‐Alkyne)CuX(PMe₃)] ( 6 ) ( 6 a : X = Cl, 6 b : X = Br) and [(S‐Alkyne)CuX(μ‐dppe)CuX(S‐Alkyne)] ( 7 a : X = Cl, 7 b : X = Br, 7 c : X = I), respectively. By‐product in the reaction of 2 a with dppe is the tetranuclear complex [(S‐Alkyne)Cu(μ‐X)₂Cu(μ‐dppe)₂Cu(μ‐X)₂Cu(S‐Alkyne)] ( 8 ). In case of the compounds 7 prolonged reaction times yield the alkyne‐free dinuclear copper complexes [Cu₂X₂(dppe)₃] ( 9 ) ( 9 a : X = Cl, 9 b : X = Br, 9 c : X = I)). X‐ray diffraction studies were carried out with the new compounds 6 a , 6 b , 7 b , 8 , and 9 c .     

Novel amorphous perfluorocopolymeric system: Copolymers of perfluoro‐2‐methylene‐1,3‐dioxolane derivatives

Perfluorotetrahydro‐2‐methylene‐furo[3,4‐d][1,3]dioxole (monomer I ) and perfluoro‐2‐methylene‐4‐methoxymethyl‐1,3‐dioxolane (monomer II ) are soluble in perfluorinated or partially fluorinated solvents and readily polymerize in solution or in bulk when initiated by a free‐radical initiator, perfluorodibenzoyl peroxide. The copolymerization parameters have been determined with in situ ¹⁹F NMR measurements. The copolymerization reactivity ratios are r _I = 1.80 and r _II = 0.80 in 1,1,2‐trichlorotrifluoroethane at 41 °C and r _I = 0.97 and r _II = 0.85 for the bulk polymerization. These data show that this copolymerization pair has a good copolymerization tendency and yields nearly ideal random copolymers. The copolymers have only one glass‐transition temperature from 101 to 168 °C, depending on the copolymer compositions. Melting endotherms have not been observed in their differential scanning calorimetry traces, and this indicates that all the copolymers with different compositions are completely amorphous. These copolymers are thermally stable (the initial decomposition temperatures are higher than 350 °C under an N₂ atmosphere) and have low refractive indices and high optical transparency from UV to near‐infrared. Copolymer films prepared by casting were flexible and tough. These properties make the copolymers ideal candidates as optical and electrical materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1613–1618, 2006