Tetrabenzononacene: “Butterfly Wings” Stabilize the Core

In combination with bulky substituents at the core, fourfold benzannulation at the cata-positions stabilizes a nonacene sufficiently to allow its isolation and characterization by ¹H NMR and X-ray analysis. The four benzo units blueshift the absorption spectrum in comparison to a solely linear nonacene, but significantly increase the stability in the solid state.     

ABC‐type hetero‐arm star terpolymers through “Click” chemistry

Hetero‐arm star ABC‐type terpolymers, poly(methyl methacrylate)‐polystyrene‐poly(tert‐butyl acrylate) (PMMA‐PS‐PtBA) and PMMA‐PS‐poly(ethylene glycol) (PEG), were prepared by using “Click” chemistry strategy. For this, first, PMMA‐b‐PS with alkyne functional group at the junction point was obtained from successive atom transfer radical polymerization (ATRP) and nitroxide‐mediated radical polymerization (NMP) routes. Furthermore, PtBA obtained from ATRP of tBA and commercially available monohydroxyl PEG were efficiently converted to the azide end‐functionalized polymers. As a second step, the alkyne and azide functional polymers were reacted to give the hetero‐arm star polymers in the presence of CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine ( PMDETA) in DMF at room temperature for 24 h. The hetero‐arm star polymers were characterized by ¹H NMR, GPC, and DSC. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5699–5707, 2006     

Photoswitchable “Turn‐on” Fluorescence Diarylethenes: Substituent Effects on Photochemical Properties and Electrochromism

A series of “turn‐on” fluorescence diarylethenes derived from 2,3‐bis(2‐methylbenzo[b]thiophen‐3‐yl)‐5,6‐dihydro‐4H‐thieno[2,3‐b]thiopyran‐4‐one ( 1 ) with alkyl and acetyl substituents were synthesized. The photochemical and photophysical properties of these derivatives, including the photoreaction of crystalline 1 , were thoroughly investigated to reveal substituent effects on their properties. The results indicated that alkyl substituents did not significantly affect the absorption and emission spectra of the diarylethenes. However, large absorption and emission wavelength shifts were observed for the diarylethene with an acetyl substituent due to extension of π–π conjugation. Significantly, all of the fluorescent ring‐closed forms of the compounds isomerized to their ring‐open forms in the presence of Cu²⁺ in the dark. EPR results provide clear evidence for the formation of the compound 1 radical cation intermediate that might be generated in the reaction between c‐ 1 and Cu²⁺. DFT calculations found that the ground‐state activation energy for ring‐opening of 1^.+ was approximately 9.2 kcal mol^?1 lower than that of 1 without Cu²⁺, such that a Cu²⁺‐catalyzed oxidative cycloreversion reaction at room temperature might be possible.     

“Protein‐Like” Copolymers: Effect of Polymer Architecture on the Performance in Bioseparation Process

Recently, a new class of copolymers, so‐called protein‐like copolymers has been predicted theoretically by computer simulation. In these copolymers, the conformation of the copolymer determines the exposure of certain comonomer units to the outer solution. Depending on the conformation, copolymer molecules with essentially the same comonomer composition could have pronouncedly different properties. The authors demonstrated experimentally such behavior in case of poly[(N‐vinylcaprolactam)‐co‐(N‐vinylimidazole)] (Dokl. Chem. 2001 , 375, 637). One more group of copolymers with protein‐like behavior is copolymers of N‐isopropylacrylamide with N‐vinylimidazole. Poly[(N‐isopropylacrylamide)‐co‐(N‐vinylimidazole)] was synthesized by radical polymerization and separated into two fractions using immobilized metal affinity chromatography on Cu²⁺‐loaded iminodiacetic acid sepharose CL 6B (Cu²⁺‐IDA‐sepharose). The unbound fraction which passed through the column and bound fraction eluted with Ethylenediaminetetraacetic acid, disodium salt (EDTA) solution differed significantly in molecular weight, 1.4×10⁶ and 1.35×10⁵, respectively but were very close in comonomer composition, 7.8 and 9.1 mol‐% of imidazole, respectively. The composition of bound fraction was confirmed by titration of imidazole groups. Despite close chemical composition, the bound and unbound fraction behaved differently with respect to temperature‐induced phase separation at different pH values, the dependence of hydrodynamic diameter on pH and concentration of Cu²⁺‐ions, and the coprecipitation of soybean trypsin inhibitor with the copolymer in the presence of Cu²⁺‐ions. The differences in the behavior of copolymer fractions are rationalized assuming that the bound fraction presents a protein‐like copolymer.     

Synthesis of ABCD 4‐Miktoarm star‐shaped quarterpolymers by combination of the “click” chemistry with multiple polymerization mechanism

Well‐defined ABCD 4‐Miktoarm star‐shaped quarterpolymers of [poly(styrene)‐poly(tert‐butyl acrylate)‐poly(ethylene oxide)‐poly(isoprene)] [star(PS‐PtBA‐PEO‐PI)] were successfully synthesized by the combination of the “click” chemistry and multiple polymerization mechanism. First, the poly(styryl)lithium (PS^?Li⁺) and the poly(isoprene)lithium (PI^?Li⁺) were capped by ethoxyethyl glycidyl ether (EEGE) to form the PS and PI with both an active ω‐hydroxyl group and an ω′‐ethoxyethyl‐protected hydroxyl group, respectively. After these two hydroxyl groups were selectively modified to propargyl and 2‐bromoisobutyryl group for PS, the resulted PS was used as macroinitiator for ATRP of tBA monomer and the diblock copolymer PS‐b‐PtBA with a propargyl group at the junction point was achieved. Then, using the functionalized PI as macroinitiator for ROP of EO monomer and bromoethane as blocking agent, the diblock copolymer PI‐b‐PEO with a protected hydroxyl group at the conjunction point was synthesized. After the hydrolysis, the recovered hydroxyl group of PI‐b‐PEO was modified to bromoacetyl and then azide group successively. Finally, the “click” chemistry between them was proceeded smoothly. The obtained star‐shaped quarterpolymers and intermediates were characterized by ¹H NMR, FT‐IR, and SEC in detail. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2154–2166, 2008     

Influence of nitroxide structure on polystyrene brushes “grafted‐from” silicon wafers

Alkoxyamine derivatives based on 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO), N‐tert‐butyl‐N‐(1‐diethylphosphono‐(2,2‐dimethylpropyl)) nitroxide (SG1) and N‐tert‐butyl‐N‐(2‐methyl‐1‐phenylpropyl) nitroxide (TIPNO) containing a C₁₁ hydrophobic spacer and a reactive triethoxysilyl polar head, were synthesized and anchored to silicon wafers by the Langmuir–Blodgett reactive deposition technique at surface pressures ranging from 15 to 32 mN/m. Polystyrene brushes (M_n ～ 8500–66,400 g/mol) were grown from the alkoxyamine functionalized silicon wafers by nitroxide mediated radical polymerization and characterized by ellipsometry and water contact angle measurements. The main parameters influencing the grafting density and the degree of stretching of the brushes are the nitroxide polarity and, therefore, the behavior of the corresponding alkoxyamines at the air/water interface of the Langmuir–Blodgett trough. Depending on the alkoxyamine chemical structure and the surface pressure during Langmuir–Blodgett deposition, polystyrene brushes with grafting densities of 0.3–1.0 chains/nm² and stretching values of 40–70% were obtained. Regarding alkoxyamines deposited at high surface pressures, size exclusion chromatography experiments performed on both cleaved polystyrene brushes and chains simultaneously grown in the bulk revealed that the polymerization degree of the bulk and surface chains are significantly different, suggesting that steric constrains affect the polymerization kinetics occurring at the silicon surface. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3367–3374, 2008     

A Perylene Bisimide Cyclophane as a “Turn‐On” and “Turn‐Off” Fluorescence Probe

A rigid, covalently linked perylene‐3,4:9,10‐tetracarboxylic acid bisimide (PBI) cyclophane was synthesized by imidization of a bay‐substituted perylene bisanhydride with p‐xylylenediamine. The interchromophoric distance of approximately 6.5 Å establishes an ideal rigid cavity for the encapsulation of large aromatic compounds such as perylene and anthracene with binding constants up to 4.6×10⁴ M ^?1 (in CHCl₃). For electron‐poor guest molecules, the complexation process is accompanied by a significantly increased fluorescence, whereas the emission intensity is dramatically quenched by more electron‐rich guests because of the formation of charge‐transfer complexes. Furthermore, the influence of the PBI core twist on the binding constant results in a remarkable selectivity towards more flexible aromatic guest molecules.     

Synthesis of arborescent polystyrene by “click” grafting

A method was developed for the synthesis of arborescent polystyrene by “click” coupling. Acetylene functionalities were introduced on linear polystyrene (M_n = 5300 g/mol, M_w/M_n = 1.05) by acetylation and reaction with potassium hydroxide, 18‐crown‐6 and propargyl bromide in toluene. Polymerization of styrene with 6‐tert‐butyldimethylsiloxyhexyllithium yielded polystyrene (M_n = 5200 g/mol, M_w/M_n = 1.09) with a protected hydroxyl chain end. Deprotection, followed by conversions to tosyl and azide functionalities, provided the side chain material. Coupling with CuBr and N,N,N′,N″,N″‐pentamethyldiethylenetriamine proceeded in up to 94% yield. Repetition of the grafting cycles led to well‐defined (M_w/M_n ≤ 1.1) polymers of generations G1 and G2 in 84% and 60% yield, respectively, with M_n and branching functionalities reaching 2.8 × 10⁶ g/mol and 460, respectively, for the G2 polymer. Coupling longer (M_n = 45,000 g/mol) side chains with acetylene‐functionalized substrates was also examined. For a linear substrate, a G0 polymer with M_n = 4.6 × 10⁵ g/mol and M_w/M_n = 1.10 was obtained in 87% yield; coupling with the G0 (M_n = 52,000 g/mol) substrate produced a G1 polymer (M_n = 1.4×10⁶ g/mol, M_w/M_n = 1.38) in 28% yield. The complementary approach using azide‐functionalized substrates and acetylene‐terminated side chains was also investigated, but proceeded in lower yield. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1730–1740     

Applications of “Hot” and “Cold” Bis(thiosemicarbazonato) Metal Complexes in Multimodal Imaging

The applications of coordination chemistry to molecular imaging has become a matter of intense research over the past 10 years. In particular, the applications of bis(thiosemicarbazonato) metal complexes in molecular imaging have mainly been focused on compounds with aliphatic backbones due to the in vivo imaging success of hypoxic tumors with PET (positron emission tomography) using ⁶⁴CuATSM [copper (diacetyl‐bis(N4‐methylthiosemicarbazone))]. This compound entered clinical trials in the US and the UK during the first decade of the 21^st century for imaging hypoxia in head and neck tumors. The replacement of the ligand backbone to aromatic groups, coupled with the exocyclic N's functionalization during the synthesis of bis(thiosemicarbazones) opens the possibility to use the corresponding metal complexes as multimodal imaging agents of use, both in vitro for optical detection, and in vivo when radiolabeled with several different metallic species. The greater kinetic stability of acenaphthenequinone bis(thiosemicarbazonato) metal complexes, with respect to that of the corresponding aliphatic ATSM complexes, allows the stabilization of a number of imaging probes, with special interest in “cold” and “hot” Cu(II) and Ga(III) derivatives for PET applications and ¹¹¹In(III) derivatives for SPECT (single‐photon emission computed tomography) applications, whilst Zn(II) derivatives display optical imaging properties in cells, with enhanced fluorescence emission and lifetime with respect to the free ligands. Preliminary studies have shown that gallium‐based acenaphthenequinone bis(thiosemicarbazonato) complexes are also hypoxia selective in vitro, thus increasing the interest in them as new generation imaging agents for in vitro and in vivo applications.     

Reaction of an “Invisible” Frustrated N/B Lewis Pair with Dihydrogen

D ‐(+)‐Camphor forms the enamine 2 with piperidine. Compound 2 adds HB(C₆F₅)₂ at the enamine carbon atom C3 to form a Lewis acid/Lewis base adduct (exo‐/endo‐isomers of 3 ). Exposure of 3 to dihydrogen (2.5 bar, room temperature) leads to heterolytic splitting of H₂ to form the H⁺/H^? addition products ( 4 , two diastereoisomers) of the “invisible” frustrated Lewis pairs ( 5 , two diastereoisomers) that were apparently generated in situ by enamine hydroboration under equilibrium conditions.     

A Nontrigonal Tricoordinate Phosphorus Ligand Exhibiting Reversible “Nonspectator” L/X‐Switching

We report here a “nonspectator” behavior for an unsupported L ‐function σ³‐P ligand (i.e. P{N[o‐NMe‐C₆H₄]₂}, 1a ) in complex with the cyclopentadienyliron dicarbonyl cation (Fp⁺). Treatment of 1a ?Fp⁺ with [(Me₂N)₃S][Me₃SiF₂] results in fluoride addition to the P‐center, giving the isolable crystalline fluorometallophosphorane 1a^F ?Fp that allows a crystallographic assessment of the variance in the Fe?P bond as a function of P‐coordination number. The nonspectator reactivity of 1a ?Fp⁺ is rationalized on the basis of electronic structure arguments and by comparison to trigonal analogue (Me₂N)₃P?Fp⁺ (i.e. 1b ?Fp⁺), which is inert to fluoride addition. These observations establish a nonspectator L/X‐switching in (σ³‐P)–M complexes by reversible access to higher‐coordinate phosphorus ligand fragments.     

New tethered ansa‐bridged zirconium catalysts: Insights into the “self‐immobilization” mechanism

New ω‐alkenyl‐substituted ansa‐bridged bisindenyl zirconium complexes are prepared and tested as self‐immobilized catalysts for ethene polymerization. But, even at very high concentration of the tethered complexes and low pressure of ethene, there is no evidence of their insertion into the polyethene chain. A “cross polymerization” test, performed by copolymerizing the tethered complexes with ethene using rac‐Me₂Si(2‐MeBenzInd)₂ZrCl₂ ( MBI ), does not lead to their incorporation into the polyethene chain. However, the corresponding ligand proves to be a suitable comonomer for ethene, and, through copolymerization promoted by MBI, innovative poly(ethene‐co‐2,2′‐bis[(1H‐inden‐3′‐yl)‐hex‐5‐ene) copolymers are prepared and characterized by ¹³C NMR. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and Structural Characterization of Three New Inorganic ＂Host-gues＂ Polyoxomolybdates

Since two interesting inorganic “host‐guest” polyoxomolybdates 1 and 2 have been reported previously, we have now succeeded in selectively isolating three new acetated “host‐guest” polyoxomolybdates 3–5, which considerably extend the range of structures in the cyclic polyoxomolybdate catalogue. 3 crystallizes in the triclinic space group P‐1 with a = 1.22235(1) nm, b = 1.52977(2) nm, c = 1.54022(1) nm, a = 113.746(1)°, β = 96.742(1)°, γ = 101.564(1)°, V = 2.51892(4) nm³, Z =1, D_c = 2.568 g. cm^?3. 4 and 5 crystallize in the monoclinic system: P2(1)/n, a = 1.08298(2) nm, b = 1.54029(1) nm, c = 2.78893(5) nm, β =94.2730(10)°, V = 4.63929(12) nm³, Z = 2 and D_c = 2.671 g. cm^?3 for 4, and C2/c, a =2.59907(8) nm, b = 1.65992(3) nm, c = 2.28473(7) nm, β‐93.4370(10)°, V = 9.8392(5) nm³, Z = 4 and D_c = 2.556 g. cm^?3 for 5. The structures of 3, 4 and 5 consist of 18‐membered “host‐guest” polyoxoanions [ Na (X)₂| ∈ |(μ_3‐OH)₄Mo^y₈Mo^VI₁₀52(μ₂‐CH₃COO)₂]^?(R+9 (X = CH₃COO^?for 3, DMF for 4 and H₂O for 5), which are connected via Na* ions or hydrogen bonds into infinite extended frameworks.     

Stereodynamics of Metal–Ligand Assembly: What Lies Beneath the “Simple” Spectral Signatures of C2‐Symmetric Chiral Chelates

A series of C₂‐symmetric chiral tetra‐dentate ligands were prepared by using [4,5]‐ or [5,6]‐pinene‐fused 2,2′‐bipyridyl units that are supported across a rigid arylene–ethynylene backbone. These conformationally pre‐organised chelates support stable 1:1 metal complexes, which were fully characterised by UV/Vis, fluorescence, circular dichroism (CD), and ¹H NMR spectroscopy. A careful inspection of the exciton‐coupled circular dichroism (ECCD) and ¹H NMR spectra of the reaction mixture in solution, however, revealed the evolution and decay of intermediate species en route to the final 1:1 metal–ligand adduct. Consistent with this model, mass spectrometric analysis revealed the presence of multiple metal complexes in solution at high ligand‐to‐metal ratios, which were essentially unobservable by UV/Vis or fluorescence spectroscopic techniques. Comparative studies with a bi‐dentate model system have fully established the functional role of the π‐conjugated ligand skeleton that dramatically enhances the thermodynamic stability of the 1:1 complex. In addition to serving as a useful spectroscopic handle to understand the otherwise “invisible” solution dynamics of this metal–ligand assembly process, temperature‐dependent changes in the proton resonances associated with the chiral ligands allowed us to determine the activation barrier (ΔG^≠) for the chirality switching between the thermodynamically stable but kinetically labile (P)‐ and (M)‐stereoisomers.     

La3OCl[AsO3]2: Ein Lanthan‐Oxidchlorid‐Oxoarsenat(III) mit “lone‐pair”‐Kanalstruktur

La₃OCl[AsO₃]₂: A Lanthanum Oxide Chloride Oxoarsenate(III) with a “Lone‐Pair” Channel Structure La₃OCl[AsO₃]₂ was prepared by the solid‐state reaction between La₂O₃ and As₂O₃ using LaCl₃ and CsCl as fluxing agents in evacuated silica ampoules at 850 °C. The colourless crystals with pillar‐shaped habit crystallize tetragonally (a = 1299.96(9), c = 558.37(5) pm, c/a = 0.430) in the space group P4₂/mnm (no. 136) with four formula units per unit cell. The crystal structure contains two crystallographically different La³⁺ cations. (La1)³⁺ is coordinated by six oxygen atoms and two chloride anions in the shape of a bicapped trigonal prism (CN = 8), whereas (La2)³⁺ carries eight oxygen atoms and one Cl^? anion arranged in the shape of tricapped trigonal prism (CN = 9). The isolated pyramidal [AsO₃]^3? anions (d(As–O) = 175–179 pm) consist of three oxygen atoms (O2 and two O3), which surround the As³⁺ cations together with the free, non‐binding electron pair (lone pair) Ψ¹‐tetrahedrally (?(O–As–O) = 95°, 3×). One of the three crystallographically independent oxygen atoms (O1), however, is exclusively coordinated by four (La2)³⁺ cations in the shape of a real tetrahedron (d(O–La) = 236 pm, 4×). These [(O1)(La2)₄]¹⁰⁺ tetrahedra form endless chains in the direction of the c axis through trans‐edge condensation. Empty channels, constituted by the lone‐pair electrons of the Cl^? anions and the As³⁺ cations in the Ψ¹‐tetrahedral oxoarsenate(III) anions [AsO₃]^3?, run parallel to [001] as well.     

Tunable Keplerate Type‐Cluster “Mo132” Cavity with Dicarboxylate Anions

The internal functionalization of the Keplerate‐type capsule Mo₁₃₂ has been carried out by ligand exchange leading to the formation of glutarate and succinate containing species isolated as ammonium or dimethylammonium salts. Solution NMR analysis is consistent with asymmetric inner dicarboxylate ions containing one carboxylato group grafted onto the inner side of the spheroidal inorganic shell while the second hangs toward the center of the cavity. Such a disposition has been confirmed by the single‐crystal X‐ray diffraction analysis of the glutarate containing {Mo₁₃₂} species. A detailed NMR solution study of the ligand‐exchange process allowed determining the binding constant K_L of acetate (AcO^?), succinate (HSucc^?) or glutarate (HGlu^?) ligands at the 30 inner coordinating sites, which vary such as K<K<K‐supported by the associated thermodynamic parameters Δ_rS* and Δ_rH*. Such a variation is mainly explained by a positive entropic gain attenuated by unfavorable steric effect. Furthermore, these results are completed by ¹H DOSY and ¹H EXSY NMR experiments which are in agreement with bulky guests firmly trapped within the cavity. At last, variable temperature ¹H NMR study below 290 K revealed a striking line broadening occurring abruptly within a 5 K range. Such an effect appears closely related to the presence of the ammonium cations suspected to be present within the cavity and then has been interpreted as an inner‐phase transition leading to a frozen state.     

Simple Bipolar Hosts with High Glass Transition Temperatures Based on 1,8‐Disubstituted Carbazole for Efficient Blue and Green Electrophosphorescent Devices with “Ideal” Turn‐on Voltage

Two hybrids based on 1,8‐disubstituted carbazole, 1,8‐OXDCz and 1,8‐mBICz , have been designed and synthesized through a facile process. The incorporation of oxadiazole or N‐phenylbenzimidazole moieties at the 1,8‐positions of carbazole greatly improves its morphological stability, giving glass transition temperatures (T_g) as high as 138 and 154 °C, respectively. Blue phosphorescent organic light‐emitting devices (PhOLEDs) with 1,8‐mBICz exhibit almost the same performance as a similarly structured device based on the mCP host, and green PhOLEDs employing the new host material 1,8‐OXDCz exhibit an ideal turn‐on voltage (2.5 V at 1.58 cd m^?2), a maximum current efficiency (η_c,max) of 73.9 cd A^?1, and a power efficiency (η_p,max) of 89.7 lm W^?1. These results are among the best performances of [Ir(ppy)₃]‐based devices with simple device configurations.     

Alkali‐Metal‐Mediated Magnesiations of an N‐Heterocyclic Carbene: Normal,Abnormal, and “Paranormal” Reactivity in a Single Tritopic Molecule

Herein the sodium alkylmagnesium amide [Na₄Mg₂(TMP)₆(nBu)₂] (TMP=2,2,6,6‐tetramethylpiperidide), a template base as its deprotonating action is dictated primarily by its 12 atom ring structure, is studied with the common N‐heterocyclic carbene (NHC) IPr [1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene]. Remarkably, magnesiation of IPr occurs at the para‐position of an aryl substituent, sodiation occurs at the abnormal C4 position, and a dative bond occurs between normal C2 and sodium, all within a 20 atom ring structure accommodating two IPr^2?. Studies with different K/Mg and Na/Mg bimetallic bases led to two other magnesiated NHC structures containing two or three IPr^? monoanions bound to Mg through abnormal C4 sites. Synergistic in that magnesiation can only work through alkali‐metal mediation, these reactions add magnesium to the small cartel of metals capable of directly metalating a NHC.     

“Coordination‐insertion” ring‐opening polymerization of 1,4‐dioxan‐2‐one and controlled synthesis of diblock copolymers with ε‐caprolactone

This communication deals with the coordination‐insertion ring‐opening polymerization of 1,4‐dioxan‐2‐one (DX) as initiated by aluminium triisopropoxide (Al(OⁱPr)₃) either in bulk or in solution. First, polymerization of DX has been carried out in bulk at 100°C and compared to the ring‐opening polymerization promoted by tin(II)octoate. Block copolymers of ε‐caprolactone (CL) and DX have been then selectively obtained by first initiating CL polymerization with Al(OⁱPr)₃ in toluene and then adding DX to the living PCL macroinitiator solution at room temperature. In spite of the inherent poor solubility of poly(1,4‐dioxan‐2‐one) in most organic solvents, DX polymerization has proven to proceed through a “living” mechanism. Interestingly enough, the semi‐crystalline P[CL‐b‐DX] block copolymers displayed two well separated melting endotherms at ca. 55 and 102°C for PCL and PDX sequences, respectively.