Model-Based Nanoengineered Pharmacokinetics of Iron-Doped Copper Oxide for Nanomedical Applications

The progress in nanomedicine (NM) using nanoparticles (NPs) is mainly based on drug carriers for the delivery of classical chemotherapeutics. As low NM delivery rates limit therapeutic efficacy, an entirely different approach was investigated. A homologous series of engineered CuO NPs was designed for dual purposes (carrier and drug) with a direct chemical composition–biological functionality relationship. Model-based dissolution kinetics of CuO NPs in the cellular interior at post-exposure conditions were controlled through Fe-doping for intra/extra cellular Cu²⁺ and biological outcome. Through controlled ion release and reactions taking place in the cellular interior, tumors could be treated selectively, in vitro and in vivo. Locally administered NPs enabled tumor cells apoptosis and stimulated systemic anti-cancer immune responses. We clearly show therapeutic effects without tumor cells relapse post-treatment with 6 % Fe-doped CuO NPs combined with myeloid-derived suppressor cell silencing.     

Aerobic Iron‐Based Cross‐Dehydrogenative Coupling Enables Efficient Diversity‐Oriented Synthesis of Coumestrol‐Based Selective Estrogen Receptor Modulators

An iron‐based cross‐dehydrogenative coupling (CDC) approach was applied for the diversity‐oriented synthesis of coumestrol‐based selective estrogen receptor modulators (SERMs), representing the first application of CDC chemistry in natural product synthesis. The first stage of the two‐step synthesis of coumestrol involved a modified aerobic oxidative cross‐coupling between ethyl 2‐(2,4‐dimethoxybenzoyl)acetate and 3‐methoxyphenol, with FeCl₃ (10 mol %) as the catalyst. The benzofuran coupling product was then subjected to sequential deprotection and lactonization steps, affording the natural product in 59 % overall yield. Based on this new methodology other coumestrol analogues were prepared, and their effects on the proliferation of the estrogen receptor (ER)‐dependent MCF‐7 and of the ER‐independent MDA‐MB‐231 breast cancer cells were tested. As a result, new types of estrogen receptor ligands having an acetamide group instead of the 9‐hydroxyl group of coumestrol were discovered. Both 9‐acetamido‐coumestrol and 8‐acetamidocoumestrol were found more active than the natural product against estrogen‐dependent MCF‐7 breast cancer cells, with IC₅₀ values of 30 and 9 nM , respectively.     

A New Iron‐Based Carbon Monoxide Oxidation Catalyst: Structure–Activity Correlation

A new iron‐based catalyst for carbon monoxide oxidation, as a potential substitute for precious‐metal systems, has been prepared by using a facile impregnation method with iron tris‐acetylacetonate as a precursor on γ‐Al₂O₃. Light‐off and full conversion temperatures as low as 235 and 278 °C can be reached. However, the catalytic activity strongly depends on the loading; lower loadings perform better than higher ones. The different activities can be explained by variations of the structures formed. The structures are thoroughly characterized by a multimethodic approach by using X‐ray diffraction, Brunauer–Emmett–Teller surface areas, and Mössbauer spectroscopy combined with diffuse reflectance UV/Vis and X‐ray absorption spectroscopy. Consequently, isolated tetrahedrally coordinated Fe³⁺ centers and phases of AlFeO₃ are identified as structural requirements for high activity in the oxidation of carbon monoxide.     

A Study of Graphene‐Based Copper Catalysts: Copper(I) Nanoplatelets for Batch and Continuous‐Flow Applications

The use of graphene derivatives as supports improves the properties of heterogeneous catalysts, with graphene oxide (GO) being the most frequently employed. To explore greener possibilities as well as to get some insights into the role of the different graphenic supports (GO, rGO, carbon black, and graphite nanoplatelets), we prepared, under the same standard conditions, a variety of heterogeneous Cu catalysts and systematically evaluated their composition and catalytic activity in azide–alkyne cycloadditions as a model reaction. The use of sustainable graphite nanoplatelets (GNPs) afforded a stable Cu^I catalyst with good recyclability properties, which are compatible with flow conditions, and able to catalyze other reactions such as the regio‐ and stereoselective sulfonylation of alkynes (addition reaction) and the Meerwein arylation (single electron transfer process).     

Copper(I) Bromide: An Alternative Emitter for Blue‐Colored Flame Pyrotechnics

Copper(I) bromide was evaluated as an alternative emitter for blue flame pyrotechnic compositions. CuBr and CuCl emission spectra were recorded from a butane torch flame and compared. Cu(BrO₃)₂ was synthesized and used in pyrotechnic compositions as an oxidizer and the source for the generation of CuBr species. Pyrotechnic compositions, which contained copper and potassium bromates as oxidizers, were optimized for the generation of blue flames. The experimental data, including emission spectra of the flames, chromaticity coordinates, burning rates, luminous intensities, and sensitivity tests, were analyzed and compared.     

In Situ Observation of Hydrogen‐Induced Surface Faceting for Palladium–Copper Nanocrystals at Atmospheric Pressure

Nanocrystal (NC) morphology, which decides the number of active sites and catalytic efficiency, is strongly determined by the gases involved in synthesis, treatment, and reaction. Myriad investigations have been performed to understand the morphological response to the involved gases. However, most prior work is limited to low pressures, which is far beyond realistic conditions. A dynamic morphological evolution of palladium–copper (PdCu) NC within a nanoreactor is reported, with atmospheric pressure hydrogen at the atomic scale. In situ transmission electron microscopy (TEM) videos reveal that spherical PdCu particles transform into truncated cubes at high hydrogen pressure. First principles calculations demonstrate that the surface energies decline with hydrogen pressure, with a new order of γ_H‐001<γ_H‐110<γ_H‐111 at 1 bar. A comprehensive Wulff construction based on the corrected surface energies is perfectly consistent with the experiments. The work provides a microscopic insight into NC behaviors at realistic gas pressure and is promising for the shaping of nanocatalysts by gas‐assisted treatments.     

Sensitive Voltammetric Determination of Bisphenol A Based on a Glassy Carbon Electrode Modified with Copper Oxide‐Zinc Oxide Decorated on Graphene Oxide

A highly sensitive and selective chemical sensor was prepared based on metallic copper‐copper oxides and zinc oxide decorated graphene oxide modified glassy carbon electrode (Cu?Zn/GO/GCE) through an easily electrochemical method for the quantification of bisphenol A (BPA). The composite electrode was characterized via scanning electron microscopy (SEM), X‐Ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). The electrochemical behavior of BPA in Britton‐Robinson (BR) buffer solution (pH 7.1) was examined using cyclic voltammetry (CV). Under optimized conditions, the square wave voltammetry (SWV) response of Cu?Zn/GO/GCE towards BPA indicates two linear relationships within concentrations (3.0 nmol L^?1?0.1 μmol L^?1 and 0.35 μmol L^?1?20.0 μmol L^?) and has a low detection limit (0.88 nmol L^?1). The proposed electrochemical sensor based on Cu?Zn/GO/GCE is both time and cost effective, has good reproducibility, high selectivity as well as stability for BPA determination. The developed composite electrode was used to detect BPA in various samples including baby feeding bottle, pacifier, water bottle and food storage container and satisfactory results were obtained with high recoveries.     

Zwitterionic Iron Oxide (γ‐Fe2O3) Nanoparticles Based on P(2VP‐grad‐AA) Copolymers

This study presents the synthesis and characterization of zwitterionic core–shell hybrid nanoparticles consisting of a core of iron oxide multicore nanoparticles (MCNPs, γ‐Fe₂O₃) and a shell of sultonated poly(2‐vinylpyridine‐grad‐acrylic acid) copolymers. The gradient copolymers are prepared by reversible addition fragmentation chain transfer polymerization of 2‐vinylpyridine (2VP), followed by the addition of tert‐butyl acrylate and subsequent hydrolysis. Grafting of P(2VP‐grad‐AA) onto MCNP results in P(2VP‐grad‐AA)@MCNP, followed by quaternization using 1,3‐propanesultone—leading to P(2VP_S‐grad‐AA)@MCNP with a zwitterionic shell. The resulting particles are characterized by transmission electron microscopy, dynamic light scattering, and thermogravimetric analysis measurements, showing particle diameters of ≈70–90 nm and an overall content of the copolymer shell of ≈10%. Turbidity measurements indicate increased stability toward secondary aggregation after coating if compared to the pristine MCNP and additional cytotoxicity tests do not reveal any significant influence on cell viability.

     

Effect of the Peptidic Scaffold in Copper(II) Coordination and the Redox Properties of Short Histidine‐Containing Peptides

A linear decapeptide containing three His and one Asp residues and a β‐turn‐inducing dProPro unit was synthesised. A detailed potentiometric, mass spectrometric and spectroscopic study showed that at a 1:1 ratio of C_Cu/C_peptide this peptide formed a major [CuH(O_dPro?Asp)]²⁺ species (pH range 5.5–7.0), in which the Cu²⁺ ion was bound to the His and Asp residues in square‐planar or square‐pyramidal geometries. The stability constant corrected for protonated species (log K*=9.33) is almost equal to the value obtained for the parent [CuH(O?Asp)]²⁺ species (log K*_CuH(O‐Asp)=9.28), but lower than that obtained for the cyclic [CuH(C?Asp)]²⁺ complex (log K*_CuH(C‐Asp)=10.79) previously published. Thus, the replacement of the ProGly unit by the stronger β‐turn‐inducing dProPro unit did not generate a more stable copper(II) species, although the O_dPro?Asp peptide was structured in solution, as shown by circular dichroism (CD) spectroscopy. Interestingly, the calculated value of K_eff showed that this peptide behaved similarly to the O?Asp or C?Asp counterparts, depending on the pH value. The cyclic voltammetry data indicated that the most easily reducible species were [CuH(O?Asp)]²⁺ (E′⁰=262 mV versus a normal hydrogen electrode (NHE)) and [CuH(O_dPro?Asp)]²⁺ (E′⁰=294 mV versus NHE) complexes, the peptidic scaffolds of which are open. A lower value was obtained for [CuH(C?Asp)]²⁺ (E′⁰=24 mV versus NHE). A different degree of non‐reversibility was observed for the three copper(II) complexes; this could reflect a different degree of flexibility in their respective peptidic scaffolds.     

Heterostructured Inter‐Doped Ruthenium–Cobalt Oxide Hollow Nanosheet Arrays for Highly Efficient Overall Water Splitting

The development of transition‐metal‐oxides (TMOs)‐based bifunctional catalysts toward efficient overall water splitting through delicate control of composition and structure is a challenging task. Herein, the rational design and controllable fabrication of unique heterostructured inter‐doped ruthenium–cobalt oxide [(Ru–Co)O_x] hollow nanosheet arrays on carbon cloth is reported. Benefiting from the desirable compositional and structural advantages of more exposed active sites, optimized electronic structure, and interfacial synergy effect, the (Ru–Co)O_x nanoarrays exhibited outstanding performance as a bifunctional catalyst. Particularly, the catalyst showed a remarkable hydrogen evolution reaction (HER) activity with an overpotential of 44.1 mV at 10 mA cm^?2 and a small Tafel slope of 23.5 mV dec^?1, as well as an excellent oxygen evolution reaction (OER) activity with an overpotential of 171.2 mV at 10 mA cm^?2. As a result, a very low cell voltage of 1.488 V was needed at 10 mA cm^?2 for alkaline overall water splitting.     

A Versatile and Robust Vesicle Based on a Photocleavable Surfactant for Two‐Photon‐Tuned Release

A small amphiphile that contains a coumarin unit and alkynyl groups, as a two‐photon‐cleavable segment and polymerizable groups, respectively, was designed and synthesized. The amphiphile showed a critical aggregation concentration of about 4.6×10^?5 M and formed a vesicle‐type assembly. The formed vesicles were stabilized by in situ “click” polymerization without altering their morphology. Hydrophobic and hydrophilic guests can be encapsulated within the vesicle membrane and inside the aqueous core of the vesicle, respectively. The loaded guests can be released from the vesicle by using UV or near‐IR stimuli, through splitting up the amphiphilic structure of the amphiphile. Distinguished dose‐controlled photorelease of the polymeric vesicle is achieved with the maintenance of vesicular integrity, which makes the guest release dependent on the amount of cleavage of the amphiphilic structure during irradiation. This study provides a potential strategy for the development of versatile and stable drug‐delivery systems that offer sustained and photo‐triggered release.     

Noble Metal‐Iron Oxide Hybrid Nanomaterials: Emerging Applications

This account provides an overview of current research activities that focus on the synthesis and applications of nanomaterials from noble metal (e.g., Au, Ag, Pd) and iron oxide (Fe₃O₄) hybrids. An introduction to the synthetic strategies that have been developed for generating M–Fe₃O₄ nanomaterials with different novel structures is presented. Surface functionalization and bioconjugation of these hybrid nanoparticles and nanocomposites are also reviewed. The utilization of the advantageous properties of both noble metals and iron oxide for a variety of applications, such as theranostics, gene delivery, biosensing, cell sorting, bioseparation, and catalysis, is discussed and highlighted. Finally, future trends and perspectives of these sophisticated nanocomposites are outlined. The fundamental requirements underpinning the effective preparation of M–Fe_xO_y hybrid nanomaterials shed light on the future development of heterogeneous catalysts, nanotheranostics, nanomedicines, and other chemical technologies.     

Copper(I) oxide nanoparticles supported on magnetic casein as a bio‐supported and magnetically recoverable catalyst for aqueous click chemistry synthesis of 1,4‐disubstituted 1,2,3‐triazoles

Copper(I) oxide nanoparticles supported on magnetic casein (Cu₂O/Casein@Fe₃O₄NPs) has been synthesized as a bio‐supported catalyst and was characterized using powder X‐ray diffraction, transmission electron microscopy, energy dispersive X‐ray and Fourier transform infrared spectroscopies, thermogravimetric analysis and inductively coupled plasma optical emission spectrometry. The catalytic activity of the synthesized catalyst was investigated in one‐pot three‐component reactions of alkyl halides, sodium azide and alkynes to prepare 1,4‐disubstituted 1,2,3‐triazoles with high yields in water. The reaction work‐up is simple and the catalyst can be magnetically separated from the reaction medium and reused in subsequent reactions.     

Three‐Dimensional Hierarchical Constructs of MOF‐on‐Reduced Graphene Oxide for Lithium–Sulfur Batteries

A three‐dimensional (3D) hierarchical MOF‐on‐reduced graphene oxide (MOF‐on‐rGO) compartment was successfully synthesized through an in situ reduced and combined process. The unique properties of the MOF‐on‐rGO compartment combining the polarity and porous features of MOFs with the high conductivity of rGO make it an ideal candidate as a sulfur host in lithium–sulfur (Li‐S) batteries. A high initial discharge capacity of 1250 mAh g^?1 at a current density of 0.1 C (1.0 C=1675 mAh g^?1) was reached using the MOF‐on‐rGO based electrode. At the rate of 1.0 C, a high specific capacity of 601 mAh g^?1 was still maintained after 400 discharge–charge cycles, which could be ascribed to the synergistic effect between MOFs and rGO. Both the hierarchical structures of rGO and the polar pore environment of MOF retard the diffusion and migration of soluble polysulfide, contributing to a stable cycling performance. Moreover, the spongy‐layered rGO can buffer the volume expansion and contraction changes, thus supplying stable structures for Li‐S batteries.     

Substitution‐Controlled Excited State Processes in Heteroleptic Copper(I) Photosensitizers Used in Hydrogen Evolving Systems

Four different heteroleptic [Cu(N^N)(P^P)]PF₆ complexes, which combine classical bidentate diimine ligands and sterically demanding diphosphine ligands, are studied by a combination of ultrafast time‐resolved spectroscopy and quantum chemical calculations. The light‐induced excited state processes, accompanied by a structural change, are discussed with respect to the application of these complexes as a new class of noble‐metal‐free photosensitizers in proton reducing systems. In particular, the influence of different substituents in the ligand backbone on the photophysical properties is highlighted.