Base‐Selective Five‐ versus Six‐Membered Ring Annulation in Palladium‐Catalyzed C–C Coupling Cascade Reactions: New Access to Electron‐Poor Polycyclic Aromatic Dicarboximides

Palladium‐catalyzed base‐selective annulation of dibromonaphthalimide to different aryl boronate esters by combined Suzuki–Miyaura cross‐coupling and direct C−H arylation afforded a series of new five‐ and six‐membered ring annulated electron‐poor polycyclic aromatic hydrocarbons. Cesium carbonate (Cs₂CO₃) as auxiliary base in these C−C coupling cascade reactions led exclusively to six‐membered ring annulation, while the use of organic base diazabicycloundecene (DBU) afforded the corresponding five‐membered ring annulated products. This base‐dependent selective mode of annulation is attributed to different mechanistic pathways directed by the applied base. The selective annulation was revealed by single crystal X‐ray analysis of the respective five‐ and six‐membered ring annulated products. The optical and redox properties of the new polycyclic aromatic dicarboximides were characterized by UV/Vis absorption and fluorescence spectroscopy and cyclic voltammetry.     

A General Synthesis of Alkenyl‐Substituted Benzofurans,Indoles, and Isoquinolones by Cascade Palladium‐Catalyzed Heterocyclization/Oxidative Heck Coupling

Structurally diverse C3‐alkenylbenzofurans, C3‐alkenylindoles, and C4‐alkenylisoquinolones are efficiently prepared by using consecutive Sonogashira and cascade Pd‐catalyzed heterocyclization/oxidative Heck couplings from readily available ortho‐iodosubstituted phenol, aniline, and benzamide substrates, alkynes, and functionalized olefins. The cyclization of O‐ and N‐heteronucleophiles follows regioselective 5‐endo‐dig‐ or 6‐endo‐dig‐cyclization modes, whereas the subsequent Heck‐type coupling with both mono‐ and disubstituted olefins takes place stereoselectively with exclusive formation of the E isomers in most cases.     

Single and Twofold Metal‐ and Reagent‐Free Anodic C−C Cross‐Coupling of Phenols with Thiophenes

The first electrochemical dehydrogenative C−C cross‐coupling of thiophenes with phenols has been realized. This sustainable and very simple to perform anodic coupling reaction enables access to two classes of compounds of significant interest. The scope for electrochemical C−H‐activating cross‐coupling reactions was expanded to sulfur heterocycles. Previously, only various benzoid aromatic systems could be converted, while the application of heterocycles was not successful in the electrochemical C−H‐activating cross‐coupling reaction. Here, reagent‐ and metal‐free reaction conditions offer a sustainable electrochemical pathway that provides an attractive synthetic method to a broad variety of bi‐ and terarylic products based on thiophenes and phenols. This method is easy to conduct in an undivided cell, is scalable, and is inherently safe. The resulting products offer applications in electronic materials or as [OSO]²⁻ pincer‐type ligands.     

Synthesis of C3‐Fluorinated Oxindoles through Reagent‐Free Cross‐Dehydrogenative Coupling

Reported herein is an unprecedented synthesis of C3‐fluorinated oxindoles through cross‐dehydrogenative coupling of C(sp³)‐H and C(sp²)‐H bonds from malonate amides. Under the unique and mild electrochemical conditions, the requisite oxidant and base are generated in a continuous fashion, allowing the formation of the base‐ and heat‐sensitive 3‐fluorooxindoles in high efficiency with broad substrate scope. The synthetic usefulness of the electrochemical method is further highlighted by its easy scalability and the diverse transformations of the electrolysis product.     

2,4‐Dinitrophenol‐Catalyzed α‐C(sp3)−H and C(sp)−H Bond Functionalization of Cyclic Amines and Alkynes: Highly Regio‐/Diastereoselective Synthesis of α‐Alkynyl‐3‐Amino‐2‐Oxindoles

A transition‐metal‐ and oxidant‐free DNP (2,4‐dinitrophenol)‐catalyzed atom‐economical regio‐ and diastereoselective synthesis of monofunctionalized α‐alkynyl‐3‐amino‐2‐oxindole derivatives by C?H bond functionalization of cyclic amines and alkynes with indoline‐2,3‐diones has been developed. This cascade event sequentially involves the reductive amination of indoline‐2,3‐dione by imine formation and cross coupling between C(sp³)?H and C(sp)?H of the cyclic amines and alkynes. This reaction offers an efficient and attractive pathway to different types of α‐alkynyl‐3‐amino‐2‐oxindole derivatives in good yields with a wide tolerance of functional groups. The salient feature of this methodology is that it completely suppresses the homocoupling of alkynes. To the best of our knowledge, this is the first example of a DNP‐catalyzed metal‐free direct C(sp³)?H and C(sp)?H bond functionalization providing biologically active α‐alkynyl‐3‐amino‐2‐oxindole scaffolds.     

Selective 1,2‐Aryl‐Aminoalkylation of Alkenes Enabled by Metallaphotoredox Catalysis

A highly chemo‐ and regioselective intermolecular 1,2‐aryl‐aminoalkylation of alkenes by photoredox/nickel dual catalysis is described here. This three‐component conjunctive cross‐coupling is highlighted by its first application of primary alkyl radicals, which were not compatible in previous reports. The readily prepared α‐silyl amines could be transferred to α‐amino radicals by photo‐induced single electron transfer step. The radical addition/cross‐coupling cascade reaction proceeds under mild, base‐free and redox‐neutral conditions with good functional group tolerance, and importantly, provides an efficient and concise method for the synthesis of structurally valuable α‐aryl substituted γ‐amino acid derivatives motifs.     

PdII‐Catalyzed Enantioselective C(sp3)−H Activation/Cross‐Coupling Reactions of Free Carboxylic Acids

Pd^II‐catalyzed enantioselective C(sp³)?H cross‐coupling of free carboxylic acids with organoborons has been realized using either mono‐protected amino acid (MPAA) ligands or mono‐protected aminoethyl amine (MPAAM) ligands. A diverse range of aryl‐ and vinyl‐boron reagents can be used as coupling partners to provide chiral carboxylic acids. This reaction provides an alternative approach to the enantioselective synthesis of cyclopropanecarboxylic acids and cyclobutanecarboxylic acids containing α‐chiral tertiary and quaternary stereocenters. The utility of this reaction was further demonstrated by converting the carboxylic acid into cyclopropyl amine without loss of optical activity.     

Catalyst‐Controlled 1,2‐ and 1,1‐Arylboration of α‐Alkyl Alkenyl Arenes

Two methods are reported for the 1,2‐ and 1,1‐arylboration of α‐methyl vinyl arenes. In the case of 1,2‐arylboration, the formation of a quaternary center occurred through a rare cross‐coupling reaction of a tertiary organometallic complex. 1,1‐Arylboration was enabled by catalyst optimization and occurred through a β‐hydride elimination/reinsertion cascade. Enantioselective variants of both processes are presented as well as mechanistic investigations.     

Palladium(0)‐Catalyzed Single and Double Isonitrile Insertion: A Facile Synthesis of Benzofurans,Indoles, and Isatins

A palladium(0)‐catalyzed cascade process consisting of isonitrile insertion and α‐Csp³?H cross‐coupling can be achieved for the synthesis of benzofurans and indoles. The construction of isatins by a Pd‐catalyzed cascade reaction incorporating double isonitrile insertion, amination, and hydrolysis has also been achieved. The key features of this work include diverse heterocycle synthesis, phosphine‐ligand‐free reaction conditions, a one‐pot procedure, simple and commercially available starting materials, broad functional‐group compatibility, and moderate to good reaction yields.     

Trapping σ‐Alkyl–Palladium(II) Intermediates with Arynes Encompassing Intramolecular C−H Activation: Spirobiaryls through Pd‐Catalyzed Cascade Reactions

A palladium‐catalyzed cascade reaction based on the trapping of transient alkyl–Pd^II intermediates with arynes encompassing a C?H activation step has been developed. This synthetic pathway gives rise to hetero‐spirocyclic scaffolds containing a biaryl motif, and opens up new synthetic strategies in the design of cascade reactions since it gathers several aspects of Pd chemistry, i.e., intra‐ and intermolecular carbopalladation of unsaturated species, C?H activation and C?C coupling processes.     

One‐Pot Process to Carborano‐Coumarin via Catalytic CascadeDehydrogenative Cross‐Coupling

Ir‐catalyzed cascade dehydrogenative CH/BH and BH/OH cross‐coupling of carboranyl carboxylic acid with readily available benzoic acid has been achieved, leading to the facile synthesis of previously unavailable carborano‐coumarin in a simple one‐pot process. Two cage B—H, one aryl C—H and one O—H bonds are activated to construct efficiently new B—C and B—O bonds. The cascade cyclization can stop at the first B—H/C—H cross‐coupling step by tuning the reaction conditions, resulting in a series of α‐carboranyl benzoic acid and aryl carborane derivatives. Control experiments indicate that B—H/C—H dehydrocoupling proceeds preferentially over B—H/O—H dehydrocoupling, and both directing groups and oxidants are crucial for this reaction. An iridium(V) intermediate is proposed to be involved in the catalytic cycle.     

Iron‐Catalyzed Cross‐Coupling of Alkenyl Acetates

Stable C O linkages are generally unreactive in cross‐coupling reactions which mostly employ more electrophilic halides or activated esters (triflates, tosylates). Acetates are cheap and easily accessible electrophiles but have not been used in cross‐couplings because the strong C O bond and high propensity to engage in unwanted acetylation and deprotonation. Reported herein is a selective iron‐catalyzed cross‐coupling of diverse alkenyl acetates, and it operates under mild reaction conditions (0 °C, 2 h) with a ligand‐free catalyst (1–2 mol %).     

Room‐temperature Suzuki–Miyaura cross‐coupling reaction with α‐diimine Pd(II) catalysts

An α‐diimine Pd(II) complex containing chiral sec‐phenethyl groups, {bis[N,N′‐(4‐methyl‐2‐sec‐phenethylphenyl)imino]‐2,3‐butadiene}dichloropalladium (rac‐ C1 ), was synthesized and characterized. rac‐ C1 was applied as an efficient catalyst for the Suzuki–Miyaura cross‐coupling reaction between various aniline halides and arylboronic acid in PEG‐400–H₂O at room temperature. Among a series of aniline halides, rac‐ C1 did not catalyze the cross‐coupling of aniline chlorides and fluorides but efficiently catalyzed the cross‐coupling of aniline bromides and iodides with phenylboronic acid. The catalytic activity reduced slightly with increasing steric hindrance of the aniline bromides. The complexes {bis[N,N′‐(4‐fluoro‐2,6‐diphenylphenyl)imino]‐2,3‐butadiene}dichloropalladium and {bis[N,N′‐(4‐fluoro‐2,6‐diphenylphenyl)imino]acenaphthene}dichloropalladium were also found to be efficient catalysts for the reaction. Copyright © 2015 John Wiley & Sons, Ltd.     

Carboxyboronate: A Versatile C1 Building Block

The synthesis and applications of carboxy‐MIDA‐boronate, a novel C1 building block, are described. This molecule is accessible via a ruthenium tetraoxide‐mediated cleavage of commercially available ethynyl‐MIDA‐boronate. In the course of this study, carboxy‐MIDA‐boronate was found to possess ambident reactivity towards nucleophiles. Carboxylic acid derivatization produces a broad range of previously unknown carbamoyl‐, oxycarbo‐ and thiocarboboronates. Carboxy‐MIDA‐boronate and its derivatives undergo condensations to access borylated heterocycles with boron at positions that are difficult to access using alternate methods. The resulting heterocycles participate in the Suzuki–Miyaura cross‐coupling reaction, enabling entry into diverse bis(heteroaryl) motifs. The carbon monoxide‐releasing capacity of carboxy‐MIDA‐boronate was also examined and applied in palladium‐catalyzed carbonylation.     

Multicomponent Reductive Cross‐Coupling of an Inorganic Sulfur Dioxide Surrogate: Straightforward Construction of Diversely Functionalized Sulfones

Conventionally, sulfones are prepared by oxidation of sulfides with strong oxidants. Now, a multicomponent reductive cross‐coupling involving an inorganic salt (sodium metabisulfite) for the straightforward construction of sulfones is disclosed. Both intramolecular and intermolecular reductive cross‐couplings were comprehensively explored, and diverse sulfones were accessible from the corresponding alkyl and aryl halides. Intramolecular cyclic sulfones were systematically obtained from five‐ to twelve‐membered rings. Naturally occurring aliphatic systems, such as steroids, saccharides, and amino acids, were highly compatible with the SO₂‐insertion reductive cross‐coupling. Four clinically applied drug molecules, which include multiple heteroatoms and functional groups with active hydrogens, were successfully prepared via a late‐stage SO₂ insertion. Mechanistic studies show that alkyl radicals and sulfonyl radicals were both involved as intermediates in this transformation.     

Ligandless heterogeneous palladium: an efficient and recyclable catalyst for Suzuki‐type cross‐coupling reaction

A mild and efficient ligand‐free Suzuki‐type cross‐coupling reaction of benzoyl chlorides and arylboronic acids catalyzed by heterogeneous Pd/C was developed. Benzoyl chlorides undergo cross‐coupling with electronically diverse arylboronic acids to give biaryl ketones in excellent yield, under aqueous media and optimum temperature. The application of 3 mol% of 10 wt% Pd/C to the cross‐coupling delivers utmost efficiency, and could be reused up to many consecutive cycles without any loss in activity. This method proceeds under aqueous media and a recyclable catalytic system, offering an environmentally benign alternative to the existing protocols. Copyright © 2014 John Wiley & Sons, Ltd.     

Cross‐Coupling Reactions of Organosilicon Compounds in the Stereocontrolled Synthesis of Retinoids

This paper presents a full account of the use of Hiyama cross‐coupling reactions in a highly convergent approach to retinoids in which the key step is construction of the central C10? C11 bond. Representatives of two families of oxygen‐activated dienyl silanes (ethoxysilanes and silanols) and of all reported families of “safety‐catch” silanols (siletanes, silyl hydrides, allyl‐, benzyl‐, aryl‐, 2‐pyridyl‐ and 2‐thienylsilanes) were regio‐ and stereoselectively prepared and stereospecifically coupled to an appropriate electrophile by treatment with a palladium catalyst and a nucleophilic activator. Both all‐trans and 11‐cis‐retinoids, and their chain‐demethylated analogues, were obtained in good yields regardless of the geometry (E/Z) and of the steric congestion in each fragment. This comprehensive study conclusively establishes the Hiyama cross‐coupling reaction, with its mild reaction conditions and stable, easily prepared, ecologically advantageous silicon‐based coupling partners, as the most effective route to retinoids reported to date.     

Highly Chemoselective Iridium Photoredox and Nickel Catalysis for the Cross‐Coupling of Primary Aryl Amines with Aryl Halides

A visible‐light‐promoted iridium photoredox and nickel dual‐catalyzed cross‐coupling procedure for the formation C?N bonds has been developed. With this method, various aryl amines were chemoselectively cross‐coupled with electronically and sterically diverse aryl iodides and bromides to forge the corresponding C?N bonds, which are of high interest to the pharmaceutical industries. Aryl iodides were found to be a more efficient electrophilic coupling partner. The coupling reactions were carried out at room temperature without the rigorous exclusion of molecular oxygen, thus making this newly developed Ir‐photoredox/Ni dual‐catalyzed procedure very mild and operationally simple.     

Silver‐Catalyzed Cross‐Coupling of Isocyanides and Active Methylene Compounds by a Radical Process

Isocyanides are versatile building blocks, and have been extensively exploited in C? H functionalization reactions. However, transition‐metal‐catalyzed direct C? H functionalization reactions with isocyanides suffer from over‐insertion of isocyanides. Reported herein is a radical coupling/isomerization strategy for the cross‐coupling of isocyanides with active methylene compounds through silver‐catalysis. The method solves the over‐insertion issue and affords a variety of otherwise difficult to synthesize β‐aminoenones and tricarbonylmethanes under base‐ and ligand‐free conditions. This report presents a new fundamental C? C bond‐forming reaction of two basic chemicals.     

Suzuki–Miyaura Coupling of (Hetero)Aryl Sulfones: Complementary Reactivity Enables Iterative Polyaryl Synthesis

Ideal organic syntheses involve the rapid construction of C?C bonds, with minimal use of functional group interconversions. The Suzuki–Miyaura cross‐coupling (SMC) is a powerful way to form biaryl linkages, but the relatively similar reactivity of electrophilic partners makes iterative syntheses involving more than two sequential coupling events difficult to achieve without additional manipulations. Here we introduce (hetero)aryl sulfones as electrophilic coupling partners for the SMC reaction, which display an intermediate reactivity between those of typical aryl (pseudo)halides and nitroarenes. The new complementary reactivity allows for rapid sequential cross‐coupling of arenes bearing chloride, sulfone and nitro leaving groups, affording non‐symmetric ter‐ and quateraryls in only 2 or 3 steps, respectively. The SMC reactivity of (hetero)aryl sulfones is demonstrated in over 30 examples. Mechanistic experiments and DFT calculations are consistent with oxidative addition into the sulfone C?S bond as the turnover‐limiting step. The further development of electrophilic cross‐coupling partners with complementary reactivity may open new possibilities for divergent iterative synthesis starting from small pools of polyfunctionalized arenes.