Synthesis and structure of 1-(buta-1,3-dien-2-yl)pyrazoles and their behavior in Diels-Alder reactions

A convenient procedure has been developed for the synthesis of cis-and trans-isomeric 1-(buta-1,3-dien-1-yl)-1H-pyrazoles by reaction of the corresponding pyrazoles with β-methylacrolein diethyl acetal and subsequent 1,4-cleavage of the nucleophilic substitution products. The behavior of the title compounds in Diels-Alder reactions with maleic anhydride has been studied. According to the ¹H NMR data, 1-(buta-1,3-dien-1-yl)-1H-pyrazole is a mixture of cis and trans isomers. Butadienylpyrazoles having methyl groups in the pyrazole ring do not react with maleic anhydride.     

Diels-Alder cycloaddition of electrophilic 2H-azirines with 3-(3-(tert-butyldimethylsilyloxy)buta-1,3-dienyl)oxazolidin-2-ones. Treatment of the cycloadducts under acidic conditions

3-(3-(tert-Butyldimethylsilyloxy)buta-1,3-dienyl)oxazolidin-2-one was reacted with several electrophilic 2H-azirines to give the expected cycloadducts in moderate to good yields. Treatment of the cycloadducts under acidic conditions gave six-membered ring aminoenones and aziridine derivatives. In the case where anilinium fluoride was used an inversion at the C-2 stereogenic center was observed forming an isomer of the former cycloadduct. The chiral (R)-3-(3-(tert-butyldimethylsiloxy)buta-1,3-dienyl)-4-phenyloxazolidin-2-one was also reacted with an electrophilic 2H-azirine. The reaction showed no diastereoselectivity, but both diastereoisomers were fully isolated by chromatography.     

Thermal oligomerization of methyl 4-(1,3-dioxo-2,3-dihydro-1H-isoindol-2-yl)buta-2,3-dienoate

Dimeric compounds formed as a result of thermal oligomerization of methyl 4-(1,3-dioxo-2,3- dihydro-1H-isoindol-2-yl)buta-2,3-dienoate were identified.     

Rhodium-catalyzed double [2 + 2 + 2] cycloaddition of 1,4-bis(diphenylphosphinoyl)buta-1,3-diyne with tethered diynes: a modular, highly versatile single-pot synthesis of NU-BIPHEP biaryl diphosphines

Rhodium-catalyzed double [2 + 2 + 2] cycloaddition of 1,4-bis(diphenylphosphinoyl)buta-1,3-diyne with tethered diynes provides a straightforward, single-pot procedure for the synthesis of a new class of tropos biaryl diphosphine, NU-BIPHEP. This methodology represents a significant improvement on existing multistep procedures. Enantiopure Lewis acid platinum complexes of these diphosphines are highly efficient catalysts for carbonyl-ene and Diels-Alder reactions, and ruthenium diphosphine-diamine complexes catalyze the asymmetric reduction of ketones to give ee's that rival those obtained with their BINAP counterpart.     

Synthesis and Structure of 2,3-Bis(5-tert-butyl-2-methoxyphenyl)buta-1,3-diene by Bromine Elimination of (Z)-1,4-Dibromo-2,3-bis(5-tert-butyl-2-methoxyphenyl)-2-butene

2,3-Bis(5-tert-butyl-2-methoxyphenyl)buta-1,3-diene was prepared by bromination of (Z)- and (E)-2,3-bis(5-tert-butyl-2-methoxyphenyl)-2-butene followed by treatment with zinc powder in a mixture of CH₂Cl₂ and acetic acid, which was converted to the corresponding o-terphenyl skeleton by the condensation with dimethyl acetylenedicarboxylate followed by oxidation with 2,3-dichloro-5,6-dicyanobenzoquinone.     

5-phenyl-2H-tetrazol-2-ylmethyl ketones in the synthesis of tetrazolylalkanols and tetrazolyl(hydroxy)alkylphosphonates

The reduction of 1-(5-phenyl-2H-tetrazol-2-yl)propan-2-one and 1-phenyl-2-(5-phenyl-2H-tetrazol-2-yl)ethanone with sodium tetrahydridoborate gave 1-(5-phenyl-2H-tetrazol-2-yl)propan-1-ol and 1-phenyl-2-(5-phenyl-2H-tetrazol-2-yl)ethanol, respectively. Only 1-(5-phenyl-2H-tetrazol-2-yl)propan-2-one was reduced with baker’s yeast with an appreciable yield. 1-(5-Phenyl-2H-tetrazol-2-yl)propan-2-one and 1-phenyl-2-(5-phenyl-2H-tetrazol-2-yl)ethanone reacted with diethyl phosphonate in the presence of potassium fluoride to produce the corresponding diethyl [hydroxy(5-phenyl-2H-tetrazol-2-yl)alkyl]phosphonates.     

One-step synthesis of [4-(alkylsulfanyl)buta-1,3-diene-1-yl]-triphenylphosphonium iodides from buta-1,3-diene-1,4-diylbis(triphenylphosphonium) iodide

Buta-1,3-diene-1,4-diylbis(triphenylphosphonium) iodide reacted with alkanethiols at room temperature in the presence of triethylamine to give [4-(alkylsulfanyl)buta-1,3-diene-1-yl]triphenylphosphonium iodides and triphenylphosphine in high yields. Two presumable reaction mechanisms involving ethynylvinyl intermediate (formed via the Hofmann decomposition of the starting diiodide and the initially formed 1,4-adduct with a thiol) were discussed.     

Basic hydrolysis of l,4-bis(triphenylphosphonio)buta-1,3-diene dihalides

Basic hydrolysis of 1,4-bis(triphenylphosphonio)buta-1, 3-diene dichloride with 10% NaOH gave isomeric 4-diphenylphosphoryl-4-phenylbut-1(2)-enes and 1-diphenylphosphoryl-1-phe-nylbuta-1, 3-diene, the products of anionotropic migration of a phenyl group from the P atom to the α-position. Hydrolysis with Na₂CO₃ afforded only the diene product. In both cases, triphe-nylphosphine and triphenylphosphine oxide were isolated as secondary products. Dehydro-chlorination of 2-chloro-1,4-bis(triphenylphosphonio)but-2-ene dibromide with triphenylphosphine was proposed as a new convenient route to 1,4-bis(triphenylphosphonio)buta-1,3-diene dibromide.     

Synthesis and structural studies of 5,7(4,6)-di(<Emphasis Type="Italic">tert</Emphasis>-butyl)-2-(6,8-dimethyl-4-chloroquinolin-2-yl)-1,3-tropolones by quantum-chemical methods and two-dimensional correlation NMR spectroscopy

4,6-Di(tert-butyl)-2-(quinolin-2-yl)-1,3-tropolone (7′) was isolated for the first time from the acid-catalyzed reaction of 2-methyl-substituted nitrogen heterocycles with 1,2-benzoquinones, which proceeds with the expansion of the o-quinone ring to give mainly isomeric 5,7-di(tert-butyl)-2-(quinolin-2-yl)-1,3-tropolone.     

Synthesis of 2-Mono- and 2,2-Bis[2-(1<Emphasis Type="Italic">H</Emphasis>-tetrazol-5-yl)ethyl] Derivatives of Dipterocarpol

The azidation of 2,2-bis(2-cyanoethyl)-20-hydroxydammar-24-en-3-one afforded new tetrazole derivatives of natural dipterocarpol, 2-(2-cyanoethyl)-2-[2-(1H-tetrazol-5-yl)ethyl]-20-hydroxydammar-24-en- 3-ones, 2,2-bis[2-(1H-tetrazol-5-yl)ethyl]-20-hydroxydammar-24-en-3-one, and 2,2-bis[2-(1H-tetrazol-5-yl)- ethyl]-3-oxo-25,26,27-trinordammaran-(20S),24-olide. The structure of the final and intermediate products was determined by NMR spectroscopy and X-ray analysis.     

Ugi three-component coupling reaction for the synthesis of 2-(6-oxo-11-phenyl-7,8-dihydrobenzo[b]pyrrolo[1,2-d][1,4]diazocin-5(6H)-yl)-2-phenylacetamide derivatives

A three-component, four center Ugi reaction of 3-(1-(2-aminophenyl)-5-phenyl-1H-pyrrol-2-yl)propanoic acid with aromatic aldehyde and t-butyl isocyanide has been achieved to produce a novel class of N-tert-butyl-2-(6-oxo-11-phenyl-7,8-dihydrobenzo[b]pyrrolo[1,2-d][1,4]diazacine-5(6H)-yl)-2-phenylacetamides in moderate to good yields.     

Molecular structures of new 2-(quinoline-2-yl)-1,3-tropolones

The molecular structures of 5,7-di(tert-butyl)-2-(6,8-dimethyl-4-piperidinoquinoline-2-yl)-3-hydroxytropone and 5,7-di(tert-butyl)-2-(5,8-dimethyl-4-piperidinoquinoline-2-yl)-3-hydroxytropone are determined by the single crystal X-ray diffraction analysis.     

Reactions of 1,4-bis(tetrazole)benzenes: formation of long chain alkyl halides

The reactions of 1,4-bis[2-(tributylstannyl)tetrazol-5-yl]benzene with α,ω-dibromoalkanes were carried out in order to synthesise pendant alkyl halide derivatives of the parent bis-tetrazole. This led to the formation of several alkyl halide derivatives, substituted variously at N1 or N2 on the tetrazole ring. The crystal structures of 1,4-bis[(2-(4-bromobutyl)tetrazol-5-yl)]benzene (2-N,2-N′), 1,4-bis[(2-(4-bromobutyl)tetrazol-5-yl)]benzene (1-N,2-N′) and 1,4-bis[(2-(8-bromooctyl)tetrazol-5-yl)]benzene (2-N,2-N′) are reported. Further discussion involves the structure of 1,4-bis[2-(6-bromohexyl)-2H-tetrazol-5-yl]benzene (2-N,2-N′) previously reported.     

Synthesis and molecular structure of 3-[5-(quinolin-2-yl)penta-1,4-dien-1-yl]-1,4-benzodioxin-2-one

Acid-catalyzed reaction of 6,10a-dihydroxy-3,4a,7,9-tetra(tert-butyl)-1,2,4a,10a-tetrahydrodibenzo-[b,e][1,4]dioxine-1,2-dione with 4-chloro-2,7,8-trimethylquinoline gave previously unknown 3,6,8-tri-tert-butyl-3-[2-tert-butyl-5-(4-chloro-7,8-dimethylquinolin-2-yl)-4-hydroxy-3-oxopenta-1,4-dien-1-yl]-5-hydroxy-1,4-benzodioxin-2-one whose structure was determined by X-ray analysis. The energy and structure parameters of possible isomers of the product in the gas phase and in solution were estimated by PBE0/6-31G** quantum-chemical calculations.     

Excited-State dynamics of conjugated polycarbosilane oligomers with branched dimethyl or diphenyl group

Dimethyl or diphenyl branched conjugated polycarbosilane oligomers in solutions, including poly[[1,4-bis(thiophenyl)buta-1,3-diyne]-alt-(dimethylsilane)], poly[[1,4-bis(thiophenyl)buta-1,3-diyne]-alt-(diphenylsilane)], poly[[1,4-bis(phenyl)buta-1,3-diyne]-alt-(dimethylsilane)], and poly[[1,4-bis(phenyl)buta-1,3-diyne]-alt-(diphenylsilane)], were investigated by steady-state and picosecond time-resolved spectroscopies to elucidate the effect of silicon-atom introduction into the π-conjugated copolymer backbone and the substitution of the aromatic phenyl group on the silicon atom. The introduction of silicon atoms into π-conjugated copolymer backbones induces slow decay emission components with lifetimes of about 450 ps in addition to π–π* local excited-state relaxations in the time-resolved fluorescence decay profiles. The diphenyls, which are branched in the silicon atoms, bring about broad, structureless emission bands in the low-frequency region of the steady-state fluorescence spectra. However, such broad bands do not occur in the case of dimethyl branched conjugated polycarbosilane oligomers. The time-resolved and solvent-dependent studies of these bands imply that the excited-state dynamics of diphenyl branched conjugated polycarbosilane oligomers can be related to an intramolecular charge-transfer dynamics through an inductive and (d-p) π-conjugation effect between the π-conjugated backbone and the branched phenyl ring. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2901–2908, 1999     

Synthesis and molecular structure of 7<Emphasis Type="Italic">H</Emphasis>-12-oxa-3,7-diazapleiadene-substituted 1,3-tropolones

An acid-catalyzed reaction of substituted 2-methyl-7H-12-oxa-3,7-diazapleiadenes with 1,2-benzoquinones leads to 7H-12-oxa-3,7-diazapleiadene-substituted 1,3-tropolones. Molecular structure of 5,7-di(tert-butyl)-2-[9,11-di(tert-butyl)-4-methyl-7H-12-oxa-3,7-diazapleiaden-2-yl]-4-nitro-1,3-tropolone was established by X-ray crystallography. Energy and structural characteristics of isomeric 5,7-di(tert-butyl)-2-[9,11-di(tert-butyl)-4-methyl-7H-12-oxa-3,7-diazapleiaden-2-yl]-4-nitro-1,3-tropolones in the gaseous phase and a polar solution were studied by the PBE0/6-31G** method.     

Crystal structures of copper(II) and nickel(II) complexes with 1,3-bis(3,5-di-tert-butylsalicylideneamino)propan-2-ol

Mononuclear copper(II) and nickel(II) complexes with 1,3-bis(3,5-di-tert-butylsalicylideneamino)propan-2-ol (H₃L) of the general formula [M(HL)] were obtained and structurally characterized. It was demonstrated that the presence of the tert-butyl groups precludes intermolecular hydrogen bonding in the crystals of the complexes and that their molecules are only linked by hydrophobic interactions.     

Structure,synthesis, and voltammetric investigation of 1-(quinolin-2-yl)-2-(pyran-2-yl)ethane-1,2-dione derivatives

By the XRD analysis the structure was established of 1-(7,8-dimethyl-4-chloroquinolin-2-yl)-2-[3,5-di(tert-butyl)-6-oxo-6H-pyran-2-yl]ethane-1,2-dione formed as a result of the oxidation of 3,5-di(tert-butyl)-6-[(Z)-2-(quinolin-2-yl)-1-hydroxyethen-1-yl]pyran-2-ones. By the cyclic voltammetry the oxidation of 1-(quinolin-2-yl)-2-(pyran-2-yl)ethane-1,2-dione derivatives was shown to proceed in two stages.     

Reaction of Potassium 1,1,3,3-Tetracyano-2-(2,2-dimethylpropanoyl)propenide with 2-Sulfanylethanol

The reaction of potassium 2-(2,2-dimethylpropanoyl)-1,1,3,3-tetracyanopropenide with an equimolar amount of 2-sulfanylethanol afforded 2-{5-amino-2-(tert-butyl)-4-cyano-2-[(2-hydroxyethyl)sulfanyl]- 2,3-dihydrofuran-3-ylidene}propanedinitrile, whereas 4-amino-1-(tert-butyl)-1,6-bis[(2-hydroxyethyl)- sulfanyl]-3-imino-1,3-dihydrofuro[3,4-c]pyridine-7-carbonitrile was obtained in the reaction with excess 2-sulfanylethanol.     

Terminal bis-acetylenes derived from 1,2-bis(1<Emphasis Type="Italic">H</Emphasis>-tetrazol-5-yl)ethane

The N(1)—N(1), N(2)—N(2), and N(1)—N(2) regioisomers of 1,2-bis[(prop-2-yn-1-yl)-1H-tetrazol-5-yl]ethane were first synthesized by alkylation of 1,2-bis(1H-tetrazol-5-yl)ethane with propargyl bromide. The peculiarities of the crystal structure of 1,2-bis[1-(prop-2-yn-1-yl)-1H-tetrazol-5-yl]ethane were evaluated by X-ray diffraction analysis. This compound is readily underwent Cu-catalyzed [3+2] cycloaddition with p-tolyl azide, p-nitrophenyl azide, and benzyl azide to give heterocyclic assembles bearing 1,2,3-triazole and tetrazole cycles. Catalyst-free [3+2] cycloadditions of 1,2-bis[1-(prop-2-yn-1-yl)-1H-tetrazol-5-yl]ethane and the mixtures of the N(1)—N(1), N(2)—N(2), N(1)—N(2) regioisomers with poly(glycidyl azide) oligomers resulted in 1,2,3-triazole cycles and crosslinking of the polymer chains.