The reduction products of 2-phenyl-1,3-di(4-pyridyl)-2-propanol

A number of chemical modifications of 2-phenyl-1,3-di(4-pyridyl) - 2 - propanol are described. Dehydration, alkylation and hydrogenation, concomitant and independent, gave a variety of novel compounds. Independent syntheses produced the related compounds X and XVI which were subjected to some of the same reactions. Structural assignments (spectral) were corroborated by the synthesis of common reaction products.     

Preparation,crystal structure,and spectroscopic,chemical, and electrochemical properties of (2E,4E)-1,4-di(3-guaiazulenyl)-1,3-butadiene compared with those of (E)-1,2-di(3-guaiazulenyl)ethylene

Wittig reaction of (E)-3-(3-guaiazulenyl)propenal (11) with (3-guaiazulenylmethyl)triphenylphosphonium bromide (9) in ethanol containing NaOEt at 25 °C for 24 h under argon gives the title new (2E,4E)-1,3-butadiene derivative 4, in 33% isolated yield, which upon treatment with hexafluorophosphoric acid (i.e., 65% HPF₆ aqueous solution) in tetrahydrofuran (=THF) at 25 °C for 1 h under aerobic conditions affords a new air (two-electron) oxidation product (E)-ethylene-1,2-bis(3-guaiazulenylmethylium) bis(hexafluorophosphate) (14), quantitatively, and further, zinc-reduction of 14 in trifluoroacetic acid (=CF₃COOH) at 0 °C for 1 h under argon reverts 4, quantitatively. Along with the above interesting results, our discovered another preparation method, spectroscopic properties, crystal structure, and electrochemical behavior of 4, which serves as a strong two-electron donor and acceptor, compared with those of the previously reported (E)-1,2-di(3-guaiazulenyl)ethylene (3) are documented in detail.     

2D-layered structure of coordination polymer,zinc trifluoroacetate-1,3-bis(4-pyridyl)propane

Compound [Zn(CF₃CO₂)₂(Bpp)₂], where Bpp is 1,3-bis(4-pyridyl)propane, was synthesized and its structure and luminescent properties were determined. Crystals are monoclinic, space group C2/c, a = 21.261(1) Å, b = 17.642(1) Å, c = 18.632(1) Å, β = 115.85(1)°, V = 6289.3(6) ų, ρ_calcd = 1.453 g/cm³, Z = 8. The structure comprises 2D neutral layers of conjugated multiunit rings composed of four Zn²⁺ ions united by four bridging Bpp ligands. Each of two crystallographically nonequivalent Zn atoms is coordinated at the octahedra apices to four nitrogen atoms of two Bpp ligands and two O(CF₃CO₂) atoms. Trifluoroacetate anions are coordinated to Zn²⁺ ions in monodentate manner. The compound exhibits photoluminescence in solid state.     

Preparation of palladium complexes of 1,3-di(2-pyridyl)propane derivatives and their use in norbornene polymerization

A variety of neutral palladium(II) complexes [Pd(L–L)Cl₂] containing 1,3-di(2-pyridyl)propane (1), 1,3-bis(2-pyridyl)-2-pentylpropane (2), 1,3-bis(2-pyridyl)-2-phenylpropane (3a), 1,3-bis(2-pyridyl)-2-tolylpropane (4), and 1,3-bis(2-pyridyl)-2-ferrocenylpropane (5) as chelate ligands (L–L) have been synthesized. The crystal structures of 1,3-diphenyl-2,4-di-pyridin-2-yl-butan-1-ol (3b), 5, [(2)PdCl₂], [(4)PdCl₂], and [(5)PdCl₂] have been determined and show a square planar geometry at palladium(II). The neutral complexes were tested in the polymerization of norbornene and copolymerization of norbornene with norbornene derivatives. The complex bearing the pentyl group exhibited high reactivity to give up to 5.9×10⁵ in molecular weight for the homopolymerization. When [(4)PdCl₂] or [(5)PdCl₂] was used as a catalyst, homopolymers insoluble at 150 °C in trichlorobenzene were obtained. However, copolymerization of norbornene with norbornene derivatives 8a–d catalyzed by [(4)PdCl₂] gave soluble copolymers with molecular weights up to 5.1×10⁵.     

Synthesis of some 1,3-disubstituted imidazo[1,5-a]pyridines using 2-cyanopyridine

Heating 2-cyanopyridine and hydrazine hydrate at 100 °C and reheating the resultant liquid with pyridine-2-carboxaldehyde yielded a red semi-solid. On adding aqueous KOH, a mixture of 1-(3,5-bis(2-pyridyl)-1,2,4-triazolyl)-3-(2-pyridyl)imidazo[1,5-a]pyridine (2a) and 1-((2-pyridyl)methanimine)-3-(2-pyridyl)imidazo[1,5-a]pyridine (2b) precipitated and from the filtrate 3,5-bis(2-pyridyl)-1,2,4-triazole (1) was isolated. Similar compounds were obtained from two other pyridinecarboxaldehydes.     

Synthesis of pyrido[1,2-a]pyrimido[4,5-d]pyrimidin-5-ones. Cyclization reaction of 4-[(3-hydroxy-2-pyridyl)amino]-2-phenyl-5-pyrimidinecarboxylic acid with acetic anhydride

Treatment of 4-[(3-hydroxy-2-pyridyl)amino]-2-phenyl-5-pyrimidinecarboxylic acid (X) with acetic anhydride under refluxing conditions afforded 10-hydroxy-2-phenyl-5H-pyrido[1,2-a]-pyrimido[4,5-d]pyrimidin-5-one acetate (IX). The intermediate X was prepared from 4-chloro-2-phenyl-5-pyrimidinecarboxylic acid ethyl ester (V). The reaction of V with the sodium salt of 2-amino-3-hydroxypyridine at room temperature gave 4-(2-amino-3-pyridyloxy)-2-phenyl-5-pyrimidinecarboxylic acid ethyl ester (VI). Treatment of VI with a hot aqueous sodium hydroxide solution and subsequent acidification gave X. Involvement of 4-[(3-hydroxy-2-pyridyl)amino]-2-phenyl-5-pyrimidinecaroboxylic acid ethyl ester (VIII) (Smiles rearrangement product) as an intermediate in the above alkaline hydrolysis reaction of VI to X was demonstrated by the isolation of VIII and its subsequent conversion into X under alkaline hydrolysis conditions. Acetylation of VIII with acetic anhydride in pyridine solution gave 4-[(3-hydroxy-2-pyridyl)amino]-2-phenyl-5-pyrimidinecarboxylic acid ethyl ester acetate (XI), which afforded IX on fusion at 220°. This alternative synthesis of IX from XI supported the structural assignment of IX. Fusion of VI gave 10-hydroxy-2-phenyl-5H-pyrido[1,2-a]pyrimido]4,5-d]pyrimidin-5-one (VII). The latter was also obtained when VIII was fused at 210°. Acetylation of VII with acetic anhydride afforded IX.     

Synthesis of conjugated (1E,3E)- and (1Z,3Z)-1,4-di(n-pyridyl) (or n-quinolyl)-1,3-butadienes from n-(2′-chloroethenyl)pyridine (or quinoline)

The homocoupling reaction between the conjugated n-(2-chloroethenyl)pyridine; n, 2-, 3- and 4- (or quinoline; n, 2- and 4-) mediated by zero-valent nickel complexes at room temperature affords to the corresponding 1,4-diaryl-1,3-butadiene, always as the 1E,3E stereoisomer. The yield in 1,4-diaryl-1,3-butadiene increases with the nickel catalyst and hence, the active zero-valent nickel catalyst is not regenerated during the homocoupling reaction.The stereospecific synthesis of (1Z,3Z)-1,4-di(4′-pyridyl)-1,3-butadiene stereoisomer was efficiently carried out by partial hydrogenation of the appropriate 1,4-di(4′-pyridyl)-1,3-butadiyne.     

Synthesis and crystal structure of three mixed-ligand silver(I) complexes constructed from 1,2-Di(4-pyridyl)ethylene and different organic carboxylate anions

The reaction of AgNO₃ with 1,2-di(4-pyridyl)ethylene (Dpe) and 2,3-pyrazinedicarboxylic acid (H₂Pzdc) or 2,2′-bipyridyl-4,4′-dicarboxylic acid (H₂Bpdc) or salicylic acid (HSa) in alcohol aqueous solution produces block-like crystals of [Ag₂(Dpe)₂]Ppzdc) · 6H₂O (I), [Ag₃(Dpe)₃](Bpdc)(NO₃) · 4H₂O (II), and [Ag₂(Dpe)₂](Sa)(NO₃) · 3H₂O (III) at room temperature. Crystal I is monoclinic: space group P2₁/m, a = 7.5370(7), b = 17.2309(16), c = 12.5131(11) Å, β = 98.3780(10)°, V = 1607.7(3) ų, Z = 2. Crystal II is triclinic: space group $P\bar 1$ , a = 8.8260(8), b = 11.1149(11), c = 13.3751(14) Å, α = 102.0140(10)°, β = 105.696(2)°, γ = 99.5940(10)°, V = 1200.4(2) ų, Z = 1. Crystal III is triclinic: space group $P\bar 1$ , a = 7.3600(6), b = 2.7549(11), c = 18.2241(16) Å, α = 106.225(2)°, β = 98.0150(10)°, γ = 99.5400(10)°, V = 1588.5(2) ų, Z = 2. All the three complexes contain sandwich-like crystal structures, in which anionic sheets built up from different anions (Pzdc^2?, Bpdc^2?, Sa^?) and lattice water molecules via rich hydrogen-bonding interactions are inserted between the cationic silver complexes layers. The lattice water molecules are situated among the framework of the crystal structure and stabilized by rich hydrogen-bonding interactions, and lattice water molecules may play a role in the orientation of the organic anions in the crystal packing.     

Crystal structures of copper(II) and zinc(II) complexes derived from 3-(2-pyridyl)pyrazole

Two dinuclear complexes [Zn(μ-L)(NO₃)(H₂O)]₂ (1) and [Cu₂(μ-L)₂(HL)₂](NO₃)₂(C₁₂H₈Br₂)_0.5·H₂O (2), (HL = 3-(2-pyridyl)pyrazole, C₁₂H₈Br₂ = 4,4′-dibromobiphenyl) are synthesized under hydrothermal conditions and characterized by elemental analysis and X-ray single crystal diffraction. Crystal data for 1: triclinic, \(P\bar 1\), a = 8.8478(7) Å, b = 15.0550(11) Å, c = 16.4310(12) Å, α = 107.588(4)°, β = 112.498(3)°, γ = 115.595(3)°, V = 2099.8(9) ų, Z = 2; for 2: triclinic, \(P\bar 1\), a = 7.2870(15) Å, b = 8.6840(17) Å, c = 9.3290(19) Å, α = 107.588(4)°, β = 112.498(3)°, γ = 115.595(3)°, V = 528.77(18) ų, Z = 1. Complex 1 and 2 are both dinuclear structures which are further packed into a 1D supramolecular chain and a 3D supramolecular framework via weak C–H…O hydrogen bond interactions respectively.     

Copper(II)-assisted thorough hydrolysis of 2,4,6-tris(2-pyridyl)1,3,5-triazine (tptz). Crystal structures of bis(2-pyridylcarboxylato)-copper(II) dihydrate and bis(2-pyridylcarbonyl)-amido-2,4,6-tris(2-pyridyl)-1,3,5-triazine-copper(II) dicyanamide heptahydrate

2,4,6-Tris(2-pyridyl)-1,3,5-triazine (tptz) undergoes hydrolysis in the presence of copper(II) acetate affording bis(2-pyridylcarbonyl)amido-copper(II) and free 2-pyridylcarboxylic anion. Two compounds of formulas [Cu(NC₅H₄COO)₂]·2H₂O (1) and [Cu(NC₅H₄CO)₂N(tptz)](N(CN)₂)·7H₂O (2), where NC₅H₄COO^? and (NC₅H₄CO)₂N^? are 2-pyridylcarboxylate and bis(2-pyridylcarbonyl)amido-anion, respectively, were obtained from methanol/ethanol solution of tptz with copper acetate; they were characterized by element analysis and single crystal X-ray diffraction method. Single crystal XRD analysis shows that in complex 1 coordination number around Cu atom is 4 with distorted square-planar coordination geometry and in complex 2 coordination number around Cu atom is 6 with distorted octahedral geometry. Crystal data for 1: a = 5.1359(10) Å, b = 7.6471(15) Å, c = 9.2303(18) Å, α = 74.90(3)°, β = 84.36(3)°, γ = 71.37(3)°, space group P1, crystal system triclinic, Z = 1, V = 331.6(1) ų, d _calc = 1.721 g/cm³. Crystallographic data for 2: space group C2/c, crystal system monoclinic, a = 23.976(5) Å, b = 15.465(3) Å, c = 18.649(4) Å, β = 92.66(3)°, V = 6907(2) ų, d _calc = 1.0448 g/cm³, Z = 4.     

Cationic polymerizations of substituted 2-methylene-1,3-dioxocyclic acetals, 2-methylene-1,3-dithiolane and copolymerization of 2-methylene-1,3-dithiolane with 4-(t-butyl)-2-methylene-1,3-dioxolane1

Carbon black-supported sulfuric acid or BF₃·Et₂O-initiated polymerizations of 2-methylene-4,4,5,5-tetramethyl-1,3-dioxolane (1), 2-methylene-4-phenyl-1,3-dioxolane (2), and 2-methylene-4-isopropyl-5,5-dimethyl-1,3-dioxane (3) were performed. 1,2-Vinyl addition homopolymers of 1–3 were produced using carbon black-supported H₂SO₄ initiation at temperatures from 0°C to 60°C whereas both ring-opened and 1,2-vinyl structural units were present in the polymers using BF₃·Et₂O as an initiator. Cationic polymerizations of 2-methylene-1,3-dithiolane (4) and copolymerization of 4 with 2-methylene-4-(t-butyl)-1,3-dioxolane (5) were initiated with either carbon black-sulfuric acid or BF₃·Et₂O. Insoluble 1,2-vinyl addition homopolymers of 4 were obtained upon initiation with the supported acid or BF₃·Et₂O. A soluble copolymer of 2-methylene-1,3-dithiolane (4) and 4-(t-butyl)-2-methylene-1,3-dioxolane (5) was obtained upon BF₃·Et₂O initiation. This copolymer is composed of three structural units: a ring-opened dithioester unit, a 1,2-vinyl-polymerized 1,3-dithiolane unit, and a 1,2-vinyl polymerized 4-(t-butyl)-1,3-dioxolane unit. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2823–2840, 1999     

Mononuclear zinc(II) complex with 2,3,5,6-tetra(2-pyridyl)pyrazine

Complex [Zn(Tppz)Cl₂] (I), where Tppz = 2,3,5,6-tetrakis(2-pyridyl)pyrazine, has been synthesized and characterized by elemental analyses, IR, ¹H NMR, cyclic voltammetry, and electronic spectral studies. Solid state structures of the complex have been determined by single-crystal X-ray crystallography. The structural determination shows that the mononuclear complex I is a 1D coordination polymer. Also an ORTEP drawing of complex I shows that the coordination geometry around the Zn(II) center is slightly distorted from regular square-based pyramidal. Crystal data for I: triclinic, spase group P $ \bar 1 $ , a = 10.171(2), b = 10.3550(13), c = 12.239 (2) Å, α = 64.839(9)°, β = 85.736(8)°, γ = 77.842(10)°, V = 1140.3(4) ų, Z = 2.     

A 3-D metal-organic framework constructed with cobalt(II), 1,3-di(4-pyridyl)propane (bpp) and 3,5-dinitrobenzoate (DNBA) with methyl-3,5-dinitrobenzoate (MDNBA) by in-situ synthesis as a guest

A new 3-D cobalt(II) mixed ligand, metal-organic framework {[Co₂(bpp)₂(DNBA)₄H₂O] ·?MDNBA} (1), (bpp =?1,3-di(4-pyridyl)propane, DNBA =?3,5-dinitrobenzoate and MDNBA =?methyl-3,5-dinitrobenzoate) was synthesized in aqueous-methanol medium. X-ray structural analysis of 1 revealed that the dinuclear cobalt clusters interlinked by two μ-carboxylates and a μ ₂ water molecule, acting as a node, are connected to four other clusters through bridging bpp to generate an extended neutral 3-D network. MDNBA was in-situ synthesized and encapsulated in the framework as a guest molecule. Moreover, the fluorescence spectrum shows 1 exhibits blue fluorescent emission in the solid state at room temperature.     

Crystal structures of 2-ferrocenylmethylidenehydrazono-1,3-dithiane and 2-ferrocenylmethylidenehydrazono-1,3-dithiepane

Two compounds of 2-ferrocenylmethylidenehydrazono-1,3-dithiane (1) and 2-ferrocenylmethylidenehydrazono-1,3-dithiepane (2) are synthesized and their single crystal structures are determined by the X-ray diffraction method. Compound 1 belongs to the orthorhombic Pca2₁ space group with the cell parameters: a = 13.989(4) Å, b = 5.785(2) Å, c = 18.231(5) Å, V = 1475.4(7) ų; while compound 2 crystallizes in a monoclinic symmetry, P2₁/c space group with a = 15.320(2) Å, b = 5.8028(6) Å, c = 36.584(4) Å, β = 91.932(1)° and V = 3250.4(6) ų.     

Synthesis and electrochemical study of 3- and 4-(2-pyridyl)-1,3-benzothiazole complexes with transition metals (CoII, NiII, and CuII). Molecular structure of bis{(4-(2-pyridyl)-1,3-benzothiazole)copper(ii)} tetraacetate

A series of the M(L)Cl₂ · nH₂O and {M(L)}₂(OAc)₄ complexes (M = Ni^II, Co^II, and Cu^II; L is 3- and 4-(2-pyridyl)-1,3-benzothiazole) were synthesized by the reaction of L with MX₂ · nH₂O (X = Cl, OAc) in ethanol. The molecular and crystal structures of the CuL₂(OAc)₄ binuclear complex (L is 4-(2-pyridyl)benzothiazole) were determined by X-ray diffraction analysis. The copper atoms have a distorted tetragonal bipyramidal environment and are coordinated to the nitrogen atom of the pyridine moiety of the ligand and to two oxygen atoms of the bridging acetate ligands. The Cu-Cu distance is 2.6129(9) Å. The electrochemical behavior of the synthesized ligands and complexes was studied using the cyclic voltammetry and rotating disk electrode techniques in DMF solutions (0.1 M Bu₄NClO₄). The primary reduction of all the complexes under study is directed to the metal.     

N-(1,3-Thiazol-5(4H)-yliden)amine aus 1,3-dipolaren Cycloadditionen von Aziden mit 1,3-Thiazol-5(4H)-thionen

N-(1,3-Thiazol-5(4H)-ylidene)amines via 1,3-Dipolar Cycloaddition of Azides and 1,3-Thiazol-5(4H)-thiones Organic azides 5 and 4,4-dimethyl-2-phenyl-1,3-thiazol-5(4H)-thione ( 2 ) in toluene at 90° react to give the corresponding N-(1,3-thiazol-5(4H)-ylidene)amines (= 1,3-thiazol-5(4H)-imines) 6 in good yield (Table). A reaction mechanism for the formation of these scarcely investigated thiazole derivatives is formulated in Scheme 3: 1,3-Dipolar azide cycloaddition onto the C?S group of 2 leads to the 1:1 adduct C . Successive elimination of N₂ and S yields 6 , probably via an intermediate thiaziridine E .     

Cycloaddition reactions of 1,3-benzothiazines—I. : Reactions of 2-phenyl-4-H and 4-phenyl-2H-1,3-benzothiazine derivatives with substituted acetyl chlorides

6,7-Dimethoxy-2-phenyl-4$\text{H}$-1,3-benzothiazine (1) and 6,7-dimethoxy-4-phenyl-2$\text{H}$-1,3-benzothiazine (2) react with substituted acetyl chlorides to give linearly, and new angularly condensed β-lactam derivatives (4,5). Heating of the latter compounds with hydrogen chloride in anhydrous ethanol leads to the formation of the corresponding 4$\text{H}$- and 2$\text{H}$-1,3-benzothiazinium chloride, respectively. The configurations of these compounds (the mutual positions of the substituents relative to the β-lactam ring) were determined by ¹H and ¹³C studies, also making use of the aromatic solvent-induced shifts.     

Regioselectivity of the hydrolysis of 2-(1-alkoxyvinyl)-substituted imidazolidines, 1,3-thiazolidines,and 1,3-oxazolidines

2-(1-Alkoxyvinyl)-1,3-thiazolidines reacted with H₂O or D₂O in the presence of 105 mol % of p-toluenesulfonic acid or trifluoroacetic acid (20°C, 1 h) to give 2-acetyl-1,3-thiazolidine in quantitative yield. 2-(1-Alkoxyvinyl)-3,5-diphenylimidazolidines underwent hydrolysis in the presence of 20 mol % of an acid (20°C, 24 h) at the vinyloxy group with high regioselectivity yielding 2-acetylimidazolidines. Hydrolysis of 2-(1-alkoxyvinyl)-3-phenyl-1,3-oxazolidines in the presence of 10 mol % of p-toluenesulfonic acid (20°C, 5 days) takes two pathways, one of which involves the endocyclic C-O bond with ring opening and the other involves the vinyloxy group to produce 2-acetyl-3-phenyl-1,3-oxazolidine. Unlike phenyl-substituted 1,3-thiazolidines and imidazolidines, hydrolysis of their 3-methyl- and 3,5-dimethyl-substituted analogs in acid medium occurs mainly via ring opening. The observed hydrolysis pathways were interpreted in terms of B3PW91/6-311G(d,p) quantum-chemical calculations.     

Novel synthesis of 2,4-bis(2-pyridyl)-5-(pyridyl)imidazoles and formation of N-(3-(pyridyl)imidazo[1,5-a]pyridine)picolinamidines: nitrogen-rich ligands

Heating a neat 1:2 mixture of 2-picolylamine and 2-cyanopyridine followed by treatment of the resultant red gummy substance with aqueous KOH resulted in the isolation of 2,4,5-tris(2-pyridyl)imidazole (1a) as the major product and N-(3-(2-pyridyl)imidazo[1,5-a]pyridine)picolinamidine (2a) in small amounts. Similarly, by using 3-picolylamine, 2,4,-bis(2-pyridyl)-5-(3-pyridyl)imidazole (1b) and N-(3-(3-pyridyl)imidazo[1,5-a]pyridine)picolinamidine (2b) were isolated, and by using 4-picolylamine, 2,4,-bis(2-pyridyl)-5-(4-pyridyl)imidazole (1c) and N-(3-(4-pyridyl)imidazo[1,5-a]pyridine)picolinamidine (2c) were isolated. The plausible mechanism of the formation of 1a-c and 2a-c is delineated.     

Synthesis and crystal structure of the Tb(III) complex with 1,3-bis(1,3-dimethyl-1<Emphasis Type="Italic">H</Emphasis>-pyrazol-4-yl)-1,3-propanedione and 1,10-phenanthroline

The reaction of Tb(NO₃)₃ · 6H₂O with 1,3-bis(1,3-dimethyl-1H-pyrazol-4-yl)-1,3-propanedi-one (HL) and 1,10-phenanthroline (Phen) in the presence of NaOH in a water-alcohol medium afforded the neutral complex [Tb(L)₃(Phen)] (I). The unstable adduct [Tb(L)₃(Phen)] · 0.4 MeCN (II), whose structure is studied by X-ray diffraction analysis, is obtained from an acetonitrile solution. The crystals of compound II at 100 K are triclinic, a = 11.2508(13), b = 11.4246(14), c = 22.486(3) Å, α = 96.522(2)°, β = 91.578(2)°, γ = 110.073(2)°, V = 2690.3(5) ų, space group P \(\bar 1\), Z= 2, R = 0.0433. The complex is characterized by the green luminescence (λ_exc = 380 nm, λ_em = 550 nm).