Research Progress of Ferrite Materials for Photoelectrochemical Water Splitting

Photoelectrochemical(PEC)water splitting is an effective strategy to convert solar energy into clean and renewable hydrogen energy.In order to carry out effective PEC conversion,researchers have conducted a lot of exploration and developed a variety of semiconductors suitable for PEC water splitting.Among them,metal oxides stand out due to their higher stability.Compared with traditional oxide semiconductors,ferrite-based photoelectrodes have the advantages of low cost,small band gap,and good stability.Interestingly,due to the unique characteristics of ferrite,most of them have various tunable features,which will be more conducive to the development of efficient PEC electrode.However,this complex metal oxide is also troubled by severe charge recombination and low carrier transport efficiency,resulting in lower conversion efficiency compared to theoretical value.Based on this,this article reviews the structure,preparation methods,characteristics and modification strategies of various common ferrites.In addition,we analyzed the future research direction of ferrite for PEC water splitting,and looked forward to the development of more efficient catalysts.     

Multifunctional Active‐Center‐Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost‐effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active‐center‐transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co‐catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co‐catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm^?2 for HER and OER in alkaline medium, respectively.     

Coupling of Bifunctional CoMn‐Layered Double Hydroxide@Graphitic C3N4 Nanohybrids towards Efficient Photoelectrochemical Overall Water Splitting

The development of durable, low‐cost, and efficient photo‐/electrolysis for the oxygen and hydrogen evolution reactions (OER and HER) is important to fulfill increasing energy requirements. Herein, highly efficient and active photo‐/electrochemical catalysts, that is, CoMn‐LDH@g‐C₃N₄ hybrids, have been synthesized successfully through a facile in situ co‐precipitation method at room temperature. The CoMn‐LDH@g‐C₃N₄ composite exhibits an obvious OER electrocatalytic performance with a current density of 40 mA cm^?2 at an overpotential of 350 mV for water oxidation, which is 2.5 times higher than pure CoMn‐LDH nanosheets. For HER, CoMn‐LDH@g‐C₃N₄ (η₅₀=?448 mV) requires a potential close to Pt/C (η₅₀=?416 mV) to reach a current density of 50 mA cm². Furthermore, under visible‐light irradiation, the photocurrent density of the CoMn‐LDH@g‐C₃N₄ composite is 0.227 mA cm^?2, which is 2.1 and 3.8 time higher than pristine CoMn‐LDH (0.108 mA cm^?2) and g‐C₃N₄ (0.061 mA cm^?2), respectively. The CoMn‐LDH@g‐C₃N₄ composite delivers a current density of 10 mA cm^?2 at 1.56 V and 100 mA cm^?2 at 1.82 V for the overall water‐splitting reaction. Therefore, this work establishes the first example of pure CoMn‐LDH and CoMn‐LDH@g‐C₃N₄ hybrids as electrochemical and photoelectrochemical water‐splitting systems for both OER and HER, which may open a pathway to develop and explore other LDH and g‐C₃N₄ nanosheets as efficient catalysts for renewable energy applications.     

Visible‐Light‐Responsive Photoanodes for Highly Active,Stable Water Oxidation

Solar energy is a natural and effectively permanent resource and so the conversion of solar radiation into chemical or electrical energy is an attractive, although challenging, prospect. Photo‐electrochemical (PEC) water splitting is a key aspect of producing hydrogen from solar power. However, practical water oxidation over photoanodes (in combination with water reduction at a photocathode) in PEC cells is currently difficult to achieve because of the large overpotentials in the reaction kinetics and the inefficient photoactivity of the semiconductors. The development of semiconductors that allow high solar‐to‐hydrogen conversion efficiencies and the utilization of these materials in photoanodes will be a necessary aspect of achieving efficient, stable water oxidation. This Review discusses advances in water oxidation activity over photoanodes of n‐type visible‐light‐responsive (oxy)nitrides and oxides.     

Multifunctional Active-Center-Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost-effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active-center-transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co-catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co-catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm⁻² for HER and OER in alkaline medium, respectively.     

Cerium-Doped Iron Oxide Nanorod Arrays for Photoelectrochemical Water Splitting

In this work, a simple one-step hydrothermal method was employed to prepare the Ce-doped Fe₂O₃ ordered nanorod arrays (CFT). The Ce doping successfully narrowed the band gap of Fe₂O₃, which improved the visible light absorption performance. In addition, with the help of Ce doping, the recombination of electron/hole pairs was significantly inhibited. The external voltage will make the performance of the Ce-doped sample better. Therefore, the Ce-doped Fe₂O₃ has reached superior photoelectrochemical (PEC) performance with a high photocurrent density of 1.47 mA/cm² at 1.6 V vs. RHE (Reversible Hydrogen Electrode), which is 7.3 times higher than that of pristine Fe₂O₃ nanorod arrays (FT). The Hydrogen (H₂) production from PEC water splitting of Fe₂O₃ was highly improved by Ce doping to achieve an evolution rate of 21 μmol/cm²/h.     

A Reliable Aerosol‐Spray‐Assisted Approach to Produce and Optimize Amorphous Metal Oxide Catalysts for Electrochemical Water Splitting

An aerosol‐spray‐assisted approach (ASAA) is proposed and confirmed as a precisely controllable and continuous method to fabricate amorphous mixed metal oxides for electrochemical water splitting. The proportion of metal elements can be accurately controlled to within (5±5) %. The products can be sustainably obtained, which is highly suitable for industrial applications. ASAA was used to show that Fe₆Ni₁₀O_x is the best catalyst among the investigated Fe‐Ni‐O_x series with an overpotential of as low as 0.286 V (10 mA cm^?2) and a Tafel slope of 48 mV/decade for the electrochemical oxygen evolution reaction. Therefore, this work contributes a versatile, continuous, and reliable way to produce and optimize amorphous metal oxide catalysts.     

Nickel Foam Supported NiO@Ru Heterostructure Towards High-Efficiency Overall Water Splitting

Electrocatalytic water splitting for hydrogen production from renewable energy requires the innovation of electrocatalysts with high activity and low cost. In this work, densely packed NiO@Ru nanosheets were fabricated on the surface of Ni foam through a two-step method of Ni(OH)₂ growth followed by Ru deposition. Through pair distribution function analysis from selected-area electron diffraction and X-ray photoelectron spectroscopy, the interface structure feature is revealed as a thin layer of perovskite NiRuO₃ sandwiched between NiO and Ru. The electrode exhibits high activity and durability for HER and OER, delivering a current density of 10 mA cm⁻² at a voltage of 1.55 V for overall water splitting in 1 M KOH. The excellent performance can be attributed to the intimate interface contact of NiO and Ru in addition to low charge transfer resistance and super-hydrophilic surface structure, as verified by the electrochemical impedance spectroscopy and contact-angle measurement.     

Earth-Abundant Transition-Metal-Based Bifunctional Electrocatalysts for Overall Water Splitting in Alkaline Media

The depletion of fossil fuels has accelerated the search for clean, sustainable, scalable, and environmentally friendly alternative energy sources. Hydrogen is a potential energy carrier because of its advantageous properties, and the electrolysis of water is considered as an efficient method for its industrial production. However, the high-energy conversion efficiency of electrochemical water splitting requires cost-effective and highly active electrocatalysts. Therefore, researchers have aimed to develop high-performance electrode materials based on non-precious and abundant transition metals for conversion devices. Moreover, to further reduce the cost and complexity in real-world applications, bifunctional catalysts that can be simultaneously active on both the anodic (i.e., oxygen evolution reaction, OER) and cathodic (i.e., hydrogen evolution reaction, HER) sides are economically and technically desirable. This Minireview focuses on the recent progress in transition-metal-based materials as bifunctional electrocatalysts, including several promising strategies to promote electrocatalytic activities for overall water splitting in alkaline media, such as chemical doping, defect (vacancy) engineering, phase engineering, facet engineering, and structure engineering. Finally, the potential for further developments in rational electrode materials design is also discussed.     

Tuning the Composition and Structure of Ni@MoC Nanosheets for Highly Active and Stable Electrocatalysis in Water Splitting

The conventional electrolytic water-splitting process for hydrogen production is plagued by high energy consumption, low efficiency, and the requirement of expensive catalysts. Therefore, finding effective, affordable, and stable catalysts to drive this reaction is urgently needed. We report a nanosheet catalyst composed of carbon nanotubes encapsulated with MoC/Mo₂C, the Ni@MoC-700 nanosheet showcases low overpotentials of 275 mV for the oxygen evolution reaction and 173 mV for the hydrogen evolution reaction at a current density of 10 mA ⋅ cm⁻². Particularly noteworthy is its outstanding performance in a two-electrode system, where a cell potential of merely 1.64 V is sufficient to achieve the desired current density of 10 mA ⋅ cm⁻². Furthermore, the catalyst demonstrates exceptional durability, maintaining its activity over a continuous operation of 40 hours with only minimal attenuation in overpotential. These outstanding activity levels and long-term stability unequivocally highlight the promising potential of the Ni@MoC-700 catalyst for large-scale water-splitting applications.     

Transition Metals-Based Water Splitting Electrocatalysts on Copper-Based Substrates: The Integral Role of Morphological Properties

Electrocatalytic water splitting is a promising alternative to produce high purity hydrogen gas as the green substitute for renewable energy. Thus, development of electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are vital to improve the efficiency of the water splitting process particularly based on transition metals which has been explored extensively to replace the highly active electrocatalytic activity of the iridium and ruthenium metals-based electrocatalysts. In situ growth of the material on a conductive substrate has also been proven to have the capability to lower down the overpotential value significantly. On top of that, the presence of substrate has given a massive impact on the morphology of the electrocatalyst. Among the conductive substrates that have been widely explored in the field of electrochemistry are the copper based substrates mainly copper foam, copper foil and copper mesh. Copper-based substrates possess unique properties such as low in cost, high tensile strength, excellent conductor of heat and electricity, ultraporous with well-integrated hierarchical structure and non-corrosive in nature. In this review, the recent advancements of HER and OER electrocatalysts grown on copper-based substrates has been critically discussed, focusing on their morphology, design, and preparation methods of the nanoarrays.     

Enhanced Photoelectrochemical Water Splitting of Black Silicon Photoanode with pH-Dependent Copper-Bipyridine Catalysts

Since the water oxidation half-reaction requires the transfer of multi-electrons and the formation of O−O bond, it's crucial to investigate the catalytic behaviours of semiconductor photoanodes. In this work, a bio-inspired copper-bipyridine catalyst of Cu(dcbpy) is decorated on the nanoporous Si photoanode (black Si, b-Si). Under AM1.5G illumination, the b-Si/Cu(dcbpy) photoanode exhibits a high photocurrent density of 6.31 mA cm⁻² at 1.5 V_RHE at pH 11.0, which is dramatically improved from the b-Si photoanode (1.03 mA cm⁻²) and f-Si photoanode (0.0087 mA cm⁻²). Mechanism studies demonstrate that b-Si/Cu(dcbpy) has improved light-harvesting, interfacial charge-transfer, and surface area for water splitting. More interestingly, b-Si/Cu(dcbpy) exhibits a pH-dependent water oxidation behaviour with a minimum Tafel slope of 241 mV/dec and the lowest overpotential of 0.19 V at pH 11.0, which is due to the monomer/dimer equilibrium of copper catalyst. At pH ∼11, the formation of dimeric hydroxyl-complex could form O−O bond through a redox isomerization (RI) mechanism, which decreases the required potential for water oxidation. This in-depth understanding of pH-dependent water oxidation catalyst brings insights into the design of dimer water oxidation catalysts and efficient photoanodes for solar energy conversion.     

Interfacial Engineering FeOOH/CoO Nanoneedle Array for Efficient Overall Water Splitting Driven by Solar Energy

Interface engineering has been applied as an effective strategy to boost the electrocatalytic performance because of the strong coupling and synergistic effects between individual components. Here, we engineered vertically aligned FeOOH/CoO nanoneedle array with a synergistic interface between FeOOH and CoO on Ni foam (NF) by a simple impregnation method. The synthesized FeOOH/CoO exhibits outstanding electrocatalytic activity and stability for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in an alkaline medium. For the overall water splitting, the bifunctional FeOOH/CoO nanoneedle catalyst requires only a cell voltage of 1.58 V to achieve a current density of 10 mA cm⁻², which is much lower than that required for IrO₂//Pt/C (1.68 V). The FeOOH/CoO catalyst has been successfully applied for solar cell-driven water electrolysis, revealing its great potential for commercial hydrogen production and solar energy storage.     

Ni-Fe/Ti和Ni-Fe-S/Ti的制备及其电催化水分解性能

以钛网为基底,采用电沉积法制备了Ni-Fe/Ti析氧电极,然后将得到的Ni-Fe/Ti电极通过固相硫化制备了Ni-Fe-S/Ti析氢电极. 分别考察了电沉积液中Ni ²⁺/Fe ³⁺离子摩尔浓度比和硫脲加入量对Ni-Fe/Ti和Ni-Fe-S/Ti结构和电化学性能的影响. 结果表明,随着电沉积液中Ni ²⁺含量的增加,Ni-Fe/Ti电极析氧性能先增强后减弱,Ni9Fe1/Ti电极具有最好的析氧性能;随着硫脲加入量的增加,Ni-Fe-S/Ti电极析氢性能呈现先增强后减弱的趋势,Ni9Fe1S0.25/Ti电极具有最好的析氢性能. 在50 mA·cm ^-2下,Ni9Fe1/Ti电极的析氧过电位为280 mV,Ni9Fe1S0.25/Ti电极的析氢过电位为269 mV,且均具有很好的稳定性. 将Ni9Fe1/Ti与Ni9Fe1S0.25/Ti分别作为阳极和阴极进行电催化全水分解,电流密度达到50 mA·cm ^-2所需电势仅1.69 V,表现出很好的全水解催化性能.     

A Flexible Electrode Based on Iron Phosphide Nanotubes for Overall Water Splitting

The design of cheap and efficient water splitting systems for sustainable hydrogen production has attracted increasing attention. A flexible electrode, based on carbon cloth substrate and iron phosphide nanotubes coated with an iron oxide/phosphate layer, is shown to catalyze overall water splitting. The as‐prepared flexible electrode demonstrates remarkable electrocatalytic activity for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) at modest overpotentials. The surface iron oxide/phosphate, which is formed in situ, is proposed to improve the HER activity by facilitating the water‐dissociation step and serves directly as the catalytically‐active component for the OER process.     

焦耳热快速合成双功能电催化剂用于高效水分解

电解水是有效的产氢方式之一, 开发具有高催化活性的电极材料是当前电解水的研究热点,但仍面临诸多挑战。 本研究报告了一种通过焦耳热技术快速制备多金属异质结构, 并将其用作电解水的双功能电催化剂, 展现出优异的电解水催化活性。通过焦耳热处理三种金属前驱涂覆的碳布, Mo₂C和CoO/Fe₃O₄异质结构形成。当其用作析氢（HER）和析氧（OER）的双功能催化剂时, 仅需121 mV和268 mV的过电位,可以实现10 mA·cm^-2的电流密度。当用于两电极电解水时, MoC/FeO/CoO/CC作为阳极和阴极催化剂表现出优异的电催化性能和长期稳定性, 仅需1.69 V即可实现10 mA·cm^-2的电流密度, 并且展现出25小时的稳定性。本研究通过简单、 快速的焦耳热技术实现了双金属/多金属异质结构的构筑,并应用于高效水电解,为合理设计多金属异质结构提供指导。     

Blending Cr2O3 into a NiO–Ni Electrocatalyst for Sustained Water Splitting

The rising H₂ economy demands active and durable electrocatalysts based on low‐cost, earth‐abundant materials for water electrolysis/photolysis. Here we report nanoscale Ni metal cores over‐coated by a Cr₂O₃‐blended NiO layer synthesized on metallic foam substrates. The Ni@NiO/Cr₂O₃ triphase material exhibits superior activity and stability similar to Pt for the hydrogen‐evolution reaction in basic solutions. The chemically stable Cr₂O₃ is crucial for preventing oxidation of the Ni core, maintaining abundant NiO/Ni interfaces as catalytically active sites in the heterostructure and thus imparting high stability to the hydrogen‐evolution catalyst. The highly active and stable electrocatalyst enables an alkaline electrolyzer operating at 20 mA cm^?2 at a voltage lower than 1.5 V, lasting longer than 3 weeks without decay. The non‐precious metal catalysts afford a high efficiency of about 15 % for light‐driven water splitting using GaAs solar cells.     

Chemical‐Bath‐Deposited Indium Oxide Microcubes for Solar Water Splitting

We fabricated films of cubic indium oxide (In₂O₃) by chemical bath deposition (CBD) for solar water splitting. The fabricated films were characterized by X‐ray diffraction analysis, Raman scattering, X‐ray photoelectron spectroscopy, and scanning electron microscopy, and the three‐dimensional microstructure of the In₂O₃ cubes was elucidated. The CBD deposition time was varied, to study its effect on the growth of the In₂O₃ microcubes. The optimal deposition time was determined to be 24 h, and the corresponding film exhibited a photocurrent density of 0.55 mA cm^?2. Finally, the film stability was tested by illuminating the films with light from an AM 1.5 filter with an intensity of 100 mW cm^?2.     

A Molecular Tetrahedral Cobalt–Seleno-Based Complex as an Efficient Electrocatalyst for Water Splitting

The cobalt–seleno-based coordination complex, [Co{(SePⁱPr₂)₂N}₂], is reported with respect to its catalytic activity in oxygen evolution and hydrogen evolution reactions (OER and HER, respectively) in alkaline solutions. An overpotential of 320 and 630 mV was required to achieve 10 mA cm⁻² for OER and HER, respectively. The overpotential for OER of this CoSe₄-containing complex is one of the lowest that has been observed until now for molecular cobalt(II) systems, under the reported conditions. In addition, this cobalt–seleno-based complex exhibits a high mass activity (14.15 A g⁻¹) and a much higher turn-over frequency (TOF) value (0.032 s⁻¹) at an overpotential of 300 mV. These observations confirm analogous ones already reported in the literature pertaining to the potential of molecular cobalt–seleno systems as efficient OER electrocatalysts.     

Nitrogen,Phosphorus, and Fluorine Tri‐doped Graphene as a Multifunctional Catalyst for Self‐Powered Electrochemical Water Splitting

Electrocatalysts are required for clean energy technologies (for example, water‐splitting and metal‐air batteries). The development of a multifunctional electrocatalyst composed of nitrogen, phosphorus, and fluorine tri‐doped graphene is reported, which was obtained by thermal activation of a mixture of polyaniline‐coated graphene oxide and ammonium hexafluorophosphate (AHF). It was found that thermal decomposition of AHF provides nitrogen, phosphorus, and fluorine sources for tri‐doping with N, P, and F, and simultaneously facilitates template‐free formation of porous structures as a result of thermal gas evolution. The resultant N, P, and F tri‐doped graphene exhibited excellent electrocatalytic activities for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The trifunctional metal‐free catalyst was further used as an OER–HER bifunctional catalyst for oxygen and hydrogen gas production in an electrochemical water‐splitting unit, which was powered by an integrated Zn–air battery based on an air electrode made from the same electrocatalyst for ORR. The integrated unit, fabricated from the newly developed N, P, and F tri‐doped graphene multifunctional metal‐free catalyst, can operate in ambient air with a high gas production rate of 0.496 and 0.254 μL s^?1 for hydrogen and oxygen gas, respectively, showing great potential for practical applications.