Crosslinked polymers (CLPs) exhibit exceptional mechanical properties as well as good chemical and solvent resistance. However, their reprocessing, recycling, and modification remain difficult. One promising approach to overcome this limitation is to introduce dynamic covalent bonds that enable chain‐exchange reactions and network‐structure rearrangements in identical polymer networks (A–A fusion), resulting in self‐healing and reprocessing properties. Reported here is the fusion of two distinct polymer networks (A–B fusion) by the dynamic behavior of bis(2,2,6,6‐tetramethylpiperidin‐1‐yl)disulfide (BiTEMPS) at the interface between different CLPs. The appearance, swelling behavior, and mechanical properties of the fused samples indicate exchange reactions of the BiTEMPS units and the formation of topological bonds at the interface, commensurate with the generation of a CLP that exhibits tunable properties. 相似文献
Peptide macrocyclization is often a slow process, plagued by epimerization and cyclodimerization. Herein, we describe a new method for peptide macrocyclization employing the AgI‐promoted transformation of peptide thioamides. The AgI has a dual function: chemoselectively activating the thioamide and tethering the N‐terminal thioamide to the C‐terminal carboxylate. Extrusion of Ag2S generates an isoimide intermediate, which undergoes acyl transfer to generate the native cyclic peptide, resulting in a rapid, traceless macrocylization process. Cyclic peptides are furnished in high yields within 1 hour, free of epimerization and cyclodimerization. 相似文献
An efficient and convenient synthesis of useful linear cyclopentenone‐fused polycyclic compounds has been achieved through a novel gold(I)‐catalyzed transformation of diynes. The method demonstrates high product yields and tolerates of a wide variety of important functional groups. Gold‐vinylidene formation, methoxy group migration, and Nazarov‐type cyclization are proposed to be the key steps in the reaction pathway. The synthetic utility of this method is demonstrated by converting the product to eight‐membered‐ring‐fused compound. 相似文献
Activated crystals of pillar[6]arene produced by removing the solvent upon heating were able to take up branched and cyclic alkane vapors as a consequence of their gate‐opening behavior. The uptake of branched and cyclic alkane vapors by the activated crystals of pillar[6]arene induced a crystal transformation to form one‐dimensional channel structures. However, the activated crystals of pillar[6]arene hardly took up linear alkane vapors because the cavity size of pillar[6]arene is too large to form stable complexes with linear alkanes. This shape‐selective uptake behavior of pillar[6]arene was further utilized for improving the research octane number of an alkane mixture of isooctane and n‐heptane: interestingly, the research octane number was dramatically improved from a low research octane number (17 %) to a high research octane number (>99 %) using the activated crystals of pillar[6]arene. 相似文献
The effect of temperature on the cocrystallization of benzoic acid (BA), pentafluorobenzoic acid (FBA), benzamide (BAm), and pentafluorobenzamide (FBAm) is examined in the solid state. BA and FBA formed a 1:1 complex 1 at ambient temperature by grinding with a mortar and pestle. Grinding FBA and BAm together resulted in partial conversion into the 1:1 adduct 2 at 28 °C and complete transformation into the product cocrystal at 78 °C. Further heating (80–100 °C) and then cooling to room temperature gave a different powder pattern from that of 2 . BAm and FBAm hardly reacted at ambient temperature, but they afforded the 1:1 cocrystal 3 by melt cocrystallization at 110–115 °C. Both BA+FBAm ( 4 ) and BA+BAm ( 5 ) reacted to give new crystalline phases upon heating, but the structures of these products could not be determined owing to a lack of diffraction‐quality single crystals. The stronger COOH and CONH2 hydrogen‐bonding groups of FBA and FBAm yielded the equimolar cocrystal 6 at room temperature, and heating of these solids to 90–100 °C gave a new crystalline phase. The X‐ray crystal structures of 1 , 2 , 3 , and 6 are sustained by the acid–acid/amide–amide homosynthons or acid–amide heterosynthon, with additional stabilization from phenyl–perfluorophenyl stacking in 1 and 3 . The temperature required for complete transformation into the cocrystal was monitored by in situ variable‐temperature powder X‐ray diffraction (VT‐PXRD), and formation of the cocrystal was confirmed by matching the experimental peak profile with the simulated diffraction pattern. The reactivity of H‐bonding groups and the temperature for cocrystallization are in good agreement with the donor and acceptor strengths of the COOH and CONH2 groups. It was necessary to determine the exact temperature range for quantitative cocrystallization in each case because excessive heating caused undesirable phase transitions. 相似文献
A novel main‐chain azobenzene cyclic polymer, cyclic‐PEHPA, has been successfully synthesized by ‘click’ cyclization of the α‐alkyne‐ω‐azido hetero‐difunctional linear precursors (linear‐PEHPA), which is synthesized by a step‐growth polymerization of the 3′‐ethynylphenyl[4‐hexyl‐(2‐azido‐2‐methyl‐ propionate) phenyl] azobenzene (EHPA). Gel permeation chromatography, and 1H NMR and FT‐IR spectra confirmed the complete transformation of linear‐PEHPA into cyclic‐PEHPA. With the same molecular weights, the cyclic‐PEHPAs are found to have higher glass transition temperatures than the linear‐PEHPAs, but almost the same decomposition temperatures. In addition, the obtained cyclic azobenzene polymer with lower molar mass shows a slightly better trans–cis–trans photoisomerization ability than the corresponding linear‐PEHPA.
The self‐assembly and self‐organization behavior of chromophoric acetylenic scaffolds bearing 2,6‐bis(acetylamino)pyridine ( 1 , 2 ) or uracyl‐type ( 3 – 9 ) terminal groups has been investigated by photophysical and microscopic methods. Systematic absorption and luminescence studies show that 1 and 2 , thanks to a combination of solvophilic/solvophobic forces and π–π stacking interactions, undergo self‐organization in apolar solvents (i.e., cyclohexane) and form spherical nanoparticles, as evidenced by wide‐field optical microscopy, TEM, and AFM analysis. For the longer molecular module, 2 , a more uniform size distribution is found (80–200 nm) compared to 1 (20–1000 nm). Temperature scans in the range 283–353 K show that the self‐organized nanoparticles are reversibly formed and destroyed, being stable at lower temperatures. Molecular modules 1 and 2 were then thoroughly mixed with the complementary triply hydrogen‐bonding units 3 – 9 . Depending on the specific geometrical structure of 3 – 9 , different nanostructures are evidenced by microscopic investigations. Combination of modules 1 or 2 with 3 , which bears only one terminal uracyl unit, leads to the formation of vesicular structures; instead, when 1 is combined with bis‐uracyl derivative 4 or 5 , a structural evolution from nanoparticles to nanowires is observed. The length of the wires obtained by mixing 1 and 4 or 1 and 5 can be controlled by addition of 3 , which prompts transformation of the wires into shorter rods. The replacement of linear system 5 with the related angular modules 6 and 7 enables formation of helical nanostructures, unambiguously evidenced by AFM. Finally, thermally induced self‐assembly was studied in parallel with modules 8 and 9 , in which the uracyl recognition sites are protected with tert‐butyloxycarbonyl (BOC) groups. This strategy allows further control of the self‐assembly/self‐organization process by temperature, since the BOC group is completely removed on heating. Microscopy studies show that the BOC‐protected ditopic modules 8 self‐assemble and self‐organize with 1 into ordered linear nanostructures, whereas BOC‐protected tritopic system 9 gives rise to extended domains of circular nano‐objects in combination with 1 . 相似文献
Oxygen release from metal oxides at high temperatures is relevant to many thermally activated chemical processes, including chemical‐looping combustion, solar thermochemical cycles and energetic thermite reactions. In this study, we evaluated the thermal decomposition of nanosized metal oxides under rapid heating (~105 K s?1) with time‐resolved mass spectrometry. We found that the effective activation‐energy values that were obtained using the Flynn–Wall–Ozawa isoconversional method are much lower than the values found at low heating rates, indicating that oxygen transport might be rate‐determining at a high heating rate. 相似文献
A continuous cyclic voltammetric study of methyldopa at gold micro electrode was carried out. The drug in phosphate buffer (pH 2.0) is adsorpted at 400 mV, giving rise to change in the current of well-defined oxidation peak of gold in the flow injection system. The proposed detection method has some of advantages, the greatest one of which are as follows: first, it is no more necessary to remove oxygen from the analyte solution and second, this is a very fast and appropriate technique for determination of the drug compound in a wide variety of chromatographic analysis methods. Signal-to-noise ratio has significantly increased by application of discrete Fast Fourier transform (FFT) method, background subtraction and two-dimensional integration of the electrode response over a selected potential range and time window. Also in this work some parameters such as sweep rate, eluent pH, and accumulation time and potential were optimized. The linear concentration range was of 1.0×10-7—1.0×10-11 mol•L-1 (r=0.9975) with a limit of detection and quantitation 0.004 nmol•L-1 and 0.03 nmol•L-1, respectively. The method has the requisite accuracy, sensitivity, precision and selectivity to assay methyldopa in tablets. The influences of pH of eluent, accumulation potential, sweep rate, and accumulation time on the determination of the methyldopa were considered. 相似文献
The zeolitic imidazolate framework‐8 (ZIF‐8) was successfully synthesized using ionic liquids as structure‐directing agent under microwave irradiation. Ionic liquids are green solvents with low vapour pressure and good thermal stability. They are appropriate templates for microporous materials and ideal microwave absorbers. The microwave‐assisted ionothermal synthesis applied in this paper was expected to be a promising method for the preparation of microporous materials. Results showed that the as‐synthesized samples (300–500 nm in diameter) could be synthesized in a short time (60 min) and possessed regular morphology, stable structure and high thermal stability (up to 720°C in argon atmosphere). Nitrogen adsorption‐desorption test illustrated that samples produced by microwave heating had a higher surface area. Carbon dioxide adsorption test indicated that the samples synthesized by microwave heating had better carbon dioxide adsorption ability than those by conventional heating. 相似文献
New nickel‐based complexes of 1,2‐bis[(2,6‐diisopropylphenyl)imino]acenaphthene (dpp‐bian) with BF4? counterion or halide co‐ligands were synthesized in THF and MeCN. The nickel(I) complexes were obtained by using two approaches: 1) electrochemical reduction of the corresponding nickel(II) precursors; and 2) a chemical comproportionation reaction. The structural features and redox properties of these complexes were investigated by using single‐crystal X‐ray diffraction (XRD), cyclic voltammetry (CV), and electron paramagnetic resonance (EPR) and UV/Vis spectroscopy. The influence of temperature and solvent on the structure of the nickel(I) complexes was studied in detail, and an uncommon reversible solvent‐induced monomer/dimer transformation was observed. In the case of the fluoride complex, the unpaired electron was found to be localized on the dpp‐bian ligand, whereas all of the other nickel complexes contained neutral dpp‐bian moieties. 相似文献
An industrial MCM‐41‐miniaturized matrix solid‐phase dispersion extraction coupled with response surface methodology was explored to determine L‐epicatechin, typhaneoside, isorhamnetin‐3‐O‐neohespeidoside, naringenin, kaempferol, and isorhamnetin in Pollen typhae by ultra‐high performance liquid chromatography connected to a photodiode array detection. Several variables were optimized in detail, including mesh number of sieve, type of adsorbent, mass ratio of sample to adsorbent, grinding time, methanol concentration, and elution volume. Central composite design was applied to optimize the best conditions for the maximum yields of the total flavonoids. The results displayed a good linear relationship (R > 0.9992) and the recoveries ranged from 92.9 to 103% (RSD < 4.53%) of the six flavonoids. The optimal method with high efficiency and low consumption was obviously better than heating reflux and ultrasonic extraction. It was proven that the developed industrial MCM‐41‐miniaturized matrix solid‐phase dispersion extraction coupled with simple ultra‐high performance liquid chromatography method could be a rapid and efficient tool for extraction and determination of flavonoids in natural products. 相似文献