Assembling of 3,6-diazabicyclo[3.1.0]hexane framework in oxidative triflamidation of substituted buta-1,3-dienes

Reaction of trifluoromethanesulfonamide (triflamide) CF₃SO₂NH₂ with 2,3-dimethylbuta-1,3-diene (2) and 2,5-dimethylhexa-2,4-diene (3) in the oxidative system (t-BuOCl+NaI) results in the formation of 2,4-dimethyl- or 2,2,4,4-tetramethyl-3,6-bis(triflyl)diazabicyclo[3.1.0]hexane through two successive heterocyclizations. Reaction of diene (3) with arenesulfonamides ArSO₂NH₂ (Ar=Ph, Tol), stops at the formation of the product of oxidative 1,4-addition, N,N′-(2,3-dimethylbut-2-ene-1,4-diyl)diarenesulfonamides, providing evidence of the essential difference between the reactivity of triflamide and arenesulfonamides.     

Reaction of <Emphasis Type="Italic">N</Emphasis>-arenesulfonyl-1,4-benzoquinone imines with acetylacetone

N-Arenesulfonyl-1,4-benzoquinone imines reacted with acetylacetone to afford different products, depending on the isolation procedure. Crystallization from polar protic solvents gave N-[4-hydroxy- 3-(2-hydroxy-4-oxopent-2-en-3-yl)phenyl]arenesulfonamides and 6-(2-oxopropyl)-4-(arenesulfonamido)phenyl acetates, whereas N-(3-acetyl-2,6-dimethyl-1-benzofuran-5-yl)arenesulfonamides were isolated by crystallization from nonpolar aprotic solvents.     

Pyridinium N-2′-pyridylaminide: synthesis of 3-aryl-2-aminopyridines through an intramolecular radical process

Tris(trimethylsilyl)silane (TTMSS) and azobisisobutironitrile (AIBN) promote the intramolecular heteroarylation of arenesulfonamides with pyridyl radicals under thermal conditions. The arenesulfonamides are easily prepared from pyridinium N-2′-pyridylaminide. The heteroarylation process involves pyridyl radical cyclization and ipso substitution.     

Novel design of 3,8-diazabicyclo[3.2.1]octane framework in oxidative sulfonamidation of 1,5-hexadiene

1,5-Hexadiene reacts with trifluoromethanesulfonamide in the oxidative system (t-BuOCl+NaI) to give trans-2,5-bis(iodomethyl)-1-(trifluoromethylsulfonyl)pyrrolidine 5 and 3,8-bis(trifluoromethylsulfonyl)-3,8-diazabicyclo[3.2.1]octane 6. With arenesulfonamides ArSO₂NH₂ (Ar=Ph, Tol), the reaction stops at the formation of the trans and cis isomers of 2,5-bis(iodomethyl)-1-(arenesulfonyl)pyrrolidine 7 and 8 (1:1). The cis isomers of 7 and 8 do not undergo cyclization to the corresponding 3,8-disubstituted 3,8-diazabicyclo[3.2.1]octanes. The reaction with triflamide represents the first example of one-pot two-step route to 3,8-diazabicyclo[3.2.1]octane system.     

Dipheno-silyliminoquinones - A 14π-system

Lithium salts of 2.6-dialkylanilines react with di-tert-butylfluorosilanes to give mono (1-3) - and bis (7, 8)-(2.6-dialkylphenylamino)silanes. Amino-2.6-dimethylphenyl-(di-tert-butylfluoro)silane (1) forms with BuLi a dimeric lithium salt (4) containing an eight-membered (LiFNSi)₂ ring system. Thermally, 4 loses LiF and a bicyclic compound (9) via iminosilenes is obtained. The lithium salt of the bulkier amino-2.6-diisopropylphenyl-(di-tert-butylfluorosilanes) (5-7) thermally loses LiH and iminosilanes (10-12) with a 14π-system are isolated. The reaction mechanisms and crystal structures are discussed.     

1,4-bis[2,2-bis(trimethylsilyl)ethenyl]benzene: Regioselective ring opening of its α,β-epoxybis(silane) with some nucleophiles

The Peterson olefination reaction of terephthalaldehyde with tris(trimethylsilyl)methyllithium, (Me₃Si)₃CLi, in Et₂O gives disubstituted vinylbis(silane) 1 which reacts with MCPBA in CH₂Cl₂ at r.t. to afford mixture of mono and disubstituted epoxybis(silanes) 3 and 2. Vinylbis(silane) 1 can be completely converted into epoxybis(silane) 2 with an excess amount of MCPBA. The compound 2 was reacted with various reagents such as HX (X = Cl, Br), H₂SO₄, LiAlH₄ and MeLi/CuI and give the related products.     

A planar silacyclobutane, 1,1-(rac-1,1′-bi-2-naphthoxy)-1-silacyclobutane and its unusual reaction with bis(1,5-cyclooctadiene)platinum(0)

The synthesis, characterization and X-ray crystal structure of 1,1-(rac-1,1′-bi-2-naphthoxy)-1-silacyclobutane (1) are reported and reveal an unusual planar conformation with a Si-βC distance of 2.302 (5) Å. Reaction of 1 with either stoichiometric or catalytic amounts of bis(1,5-cyclooctadiene)platinum(0) {Pt(cod)₂} gave 1,1′-bi-2-naphthol (BINOL), rather than the expected insertion products or polymer. A mechanism is proposed based on insertion of the Pt(cod) into 1 followed by hydride transfers via the Pt center to the 1,1′-bi-2-naphthoxy group. Anionic ring-opening polymerization of 1 is also reported and gave the poly(carbosilane) (4).     

Asymmetrization of all-cis-3,5-dihydroxy-1-(methoxycarbonyl)cyclohexane and of the 4-methyl and 4-ethyl substituted homologues

Enantiomerically pure mono acylated derivatives of cis,cis-3,5-dihydroxy-1-(methoxycarbonyl)cyclohexane 1, all-cis-3,5-dihydroxy-4-methyl-1-(methoxycarbonyl)cyclohexane 2 and all-cis-3,5-dihydroxy-4-ethyl-1-(methoxycarbonyl)cyclohexane 3 were obtained upon lipase catalyzed asymmetrization. PPL-catalyzed transesterification of 1 with vinyl acetate led in high yield to the (S)-monoacetate (+)-13. With substrates 2 and 3 this process was slower and gave the (R)-monoacetates (−)-14 and (−)-15; the best results were obtained with SAM II lipase. On the other hand, enantiotoposelective hydrolysis of their diacetates and especially dibutyrates gave useful results only for the 4-substituted substrates and produced the (S)-monoesters.     

Synthesis of conjugated 2-arylethynyl and 2-arylethenyl thiophene structures with optical properties

Conjugated mono(arylethynyl)oligothiophene structures have been obtained starting with (E)-[1-(2′-thienyl)-2-(p-phenyl)]ethyne (E)-7 and 2-[p-(iodophenyl)ethynyl]thiophene 8. Conjugated nanostructures were synthesized by oxidative coupling between the terminal acetylenes (E)-7 and 8 to give, respectively, 1,4-di[(2-p-(iodophenyl)ethynyl)thienyl]-1,3-butadiyne and 1,4-di[(2-p-iodophenylethynyl)thienyl]-1,3-butadiyne. All the thiophene derivatives synthesized show an important fluorescence radiation emission, with a bathochromic shift, which increases with the conjugation of the chain.     

Organometallic chemistry of 15-membered tri-olefinic macrocycles: catalysis by palladium(0) complexes in carbon-carbon bond-forming reactions

15-Membered macrocycles (E,E,E)-1,6,11-tris(arenesulfonyl)-1,6,11-triazacyclopentadeca-3,8,13-trienes (1) are prepared from arenesulfonamides and trans-1,4-dibromo-2-butene. Macrocycles 1 coordinate palladium(0), platinum(0), and silver(I). The palladium complexes are useful and reutilizable catalysts or precatalysts in Suzuki cross-couplings, butadiene telomerizations, hydroarylation of alkynes, and in the Heck reaction. Structurally related macrocycles are also available by similar synthetic procedures.     

Reaction of <Emphasis Type="Italic">N</Emphasis>-(2,3-epoxypropyl)arenesulfonamides with (bicyclo[2.2.1]hept-5-en-<Emphasis Type="Italic">endo</Emphasis>-2-yl)methanamine

Reactions of bicyclo[2.2.1]hept-5-en-endo-2-ylmethanamine with N-(2,3-epoxypropyl)arenesulfonamides gave amino alcohols having a norbornene fragment and sulfonamide group. The major products were formed via opening of the oxirane ring according to the Krasuskii rule. The product structure was determined by ¹H and ¹³C NMR spectroscopy using DEPT and two-dimensional COSY, NOESY, HMQC, and HMBC techniques.     

Synthesis of new imidazo[2,1-<Emphasis Type="Italic">b</Emphasis>][1,3]thiazole derivatives from 2-amino-4-(2,2-dichlorovinyl)-1,3-thiazole and <Emphasis Type="Italic">N</Emphasis>-(2,2-dichloro-2-phenylethylidene)arenesulfonamides

2-Amino-4-(2,2-dichlorovinyl)-1,3-thiazole reacted with highly electrophilic N-(2,2-dichloro-2-phenylethylidene)- and N-(2,2,2-trichloroethylidene)arenesulfonamides through the exocyclic amino group to give products of nucleophilic addition to the azomethine bond, N-[2,2-di(or 2,2,2-tri)chloro-1-(1,3-thiazol-2-ylamino)ethyl]arenesulfonamides in good yields. Intramolecular heterocyclization of the latter afforded N-[3-(2,2-dichloroethyl)-6-phenylimidazo[2,1-b][1,3]thiazol-5-yl]arenesulfonamides.     

A route to fluorocontaining N,S-heterocycles via octafluoro-2,3-epoxybutane

The reaction of octafluoro-2,3-epoxybutane 1 with 2-aminothiophenol gave three kinds of novel fluorocontaining N,S-heterocyclic compounds depending on the solvent nature: 2,3-bis(trifluoromethyl)-3,4-dihydro-2H-1,4-benzothiazin-2-ol 2, 2-trifluoromethyl-2-[1-(2-aminophenylthio)-2,2,2-trifluoroethyl]-1,3-benzothiazolidine 6 and 5a,11a-bis(trifluoromethyl)-5a,6,11a,12-tetrahydro-5,11-dithia-6,12-diazanaphthacene 5. Use of the toluene, dioxane, tetrahydrofuran, acetonitrile and dimethoxyethane gave the unexpected dihydrobenzothiazine 2 (RS,SR > RR,SS) in good to moderate yields. In dimethylsulfoxide and N,N-dimethylacetamide, unusual cyclization occurred resulting in benzothiazolidine 6 (RS,SR/RR,SS ∼ 1:1) in moderate yields. Formation of minor 1,1,1,3,4,4,4-heptafluoro-3-(2-aminophenylthio)-2,2-dihydroxybutane 4 which was converted into bis(benzothiazine) 5 was observed in all solvents tested with the exception of toluene and dioxane. The molecular structure of the RS,SR-diastereomer of dihydrobenzothiazine 2, bis(benzothiazine) 5 and the RS,SR-diastereomer of benzothiazolidine 6 has been established by X-ray crystallography.     

Sulfonamidation of halogen-substituted electrophiles with <Emphasis Type="Italic">N</Emphasis>-(2,2,2-trichloroethyl)arenesulfonamides

Reactions of N-(2,2,2-trichloroethyl)arenesulfonamides with primary alkyl bromides and iodides, allyl bromide, chloroacetonitrile, and benzyl chloride in acetonitrile on heating in the presence of potassium carbonate gave the corresponding N-alkyl-N-(2,2,2-trichloroethyl)arenesulfonamides.     

Reactions of β-substituted amines-IV: Kinetics and stereochemistry of the thermal to (r) 3-chloro-1-ethylpiperidine,and the stereo-chemical course of their reactions with nucleophiles

The rate of the thermal rearrangement of (S) 2 chloromethyl-1-ethylpyrrolidine [(S)-1a] to (R)-3-chloro-1-ethylpiperidine [(R) 2a] has been examined at three temperatures in benzene by PMR and polarimetry. The rearrangement was shown to be completely stereospecific and to obey a simple first order rate law. The calculated E_a ΔH3 and ΔS3 were 22 ± 2 $\text{kcal}\text{mole}$ (25°), 21 ± 2.5 $\text{kcal}\text{mole}$ (25°) and - 10 ± 2 e.u. (0°K) respectively. The effect of solvents having differing dielectric constants was also studied. A transition state 9'a and an ion pair intermediate 3a are suggested for the rearrangement. The stereochemical course of the reactions of (S)-1a, (R)-2a and (S)-2a with hydroxide and methoxide ions have been shown to be 100% stereospecific with an uncertainty of about 1%. The absolute configurations of all optically active reactants and products [(S)- and (R)-4a, (S)-4b (R)- and (S)-5a, (R)-5b, (S,S')-6a, (S,R')-7a and (R,R')-8a] were established by chemical correlations with known compounds or by ORD and chemical inference. The ring opening of both the primary and secondary aziridinium ion positions of 1-azonia-1-ethylbicyclo [3.1.0]hexane [(S)-3a] by nucleophiles proceeds entirely by S_N2 processes. The conversion of (R)-1-ethyl-3-hydroxypiperidine [(R)-5a] to (S)-2a. HCl with thionyl chloride in chloroform proceeds by inversion with 4.8% racemization, whereas the thermal rearrangement of (S)-1a to (R)-2a occurs with complete retention of absolute configuration.     

A rare case of facial selectivity inversion for Sharpless asymmetric dihydroxylation in a series of structurally homogeneous substrates: synthesis of non-racemic 3-(nitrophenoxy)-propane-1,2-diols

Asymmetric dihydroxylation of mono nitrophenyl allyl ethers leads to the corresponding non-racemic 3-(nitrophenoxy)-propane-1,2-diols 1a–c. As this takes place, regardless of the reagent used (AD-mix-α or AD-mix-β), the configuration of the predominant enantiomer for the para- and meta-nitrosubstituted products is opposite to the configuration of the ortho-nitrophenyl derivative. A correlation between the melting points and vibrational spectra of the racemic and enantiopure diols 1a–c allowed us to establish that all of the chiral substances investigated formed stable racemic compounds in the solid phase.     

Silylene-spaced diphenylanthracene derivatives as blue-emitting materials

A novel series of blue emitting silylene-spaced diphenylanthracene derivatives have been synthesized and characterized. The rhodium-catalyzed hydrosilylation of bis[4-(dimethylsilyl)phenyl]anthracene 3-4 yielded stable 9,10-disubstituted (E)-divinylsilylene-diphenylanthracene products 7-10 and salt elimination reaction of bis[4-(chlorodimethylsilyl)phenyl]anthracene 5-6 gave 9,10-disubstituted disilyldiphenylanthracene compounds 11-14. They are fluorescent in the blue region with good quantum efficiencies. The rhodium-catalyzed polyaddition including 2-tert-butyl-9,10-bis[4-(dimethylsilyl)phenyl]anthracene (4) afforded the nonconjugated copolymer 15.     

First cross-coupling reactions on halogenated 1H-1,2,4-triazole nucleosides

The halogenated 1H-1,2,4-triazole glycosides 6-10 were synthesized by BF₃-activated glycosylation of 3(5)-chloro-1,2,4-triazole (2), 3,5-dichloro-1,2,4-triazole (3), 3,5-dibromo-1,2,4-triazole (4), and 3(5)-bromo-5(3)-chloro-1,2,4-triazole (5) with 1,2,3,4-tetra-O-pivaloyl-β-d-xylopyranose (1). The β-anomeric major products 3-chloro-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazole (6β), 3,5-dichloro-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazole (7β), and 3,5-dibromo-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazole (8β) were used as starting materials for transition metal catalyzed C-C-coupling reactions. Arylations of the triazole ring of 7β, and 8β were successful in 5-position with phenylboronic acid, 4-vinylphenylboronic acid, and 4-methoxyphenylboronic acid, respectively, under Suzuki cross-coupling conditions (products 11-17). Moreover, a Cu-catalyzed perfluoroalkylation of 8β is reported with 1-iodo-perfluorohexane yielding 3-perfluorohexyl-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazole (18). Compound 18 was depivaloylated to the trihydroxy derivative 19. The copper-mediated reaction of 8β with Rupert's reagent gave the bis(3-bromo-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazol-5-yl) (20).     

Addition reactions of nucleophiles to dibenzoylacetylene

Several enamine diones have been prepared through the nucleophilic addition of different amines to dibenzoylacetylene (DBA). Thus, the reaction of aniline, piperidine, o-aminophenol and N-phenylbenzylamine with DBA gave the corresponding 1:1 adducts namely, 1,4 - diphenyl - 2 - (N - phenylamino)but - 2 - ene -1,4 - dione (1), 1,4 - diphenyl - 2 - piperidinobut - 2 - ene - 1,4 - dione (2), 2 - (N - 2 - hydroxyphenylamino)1,4 - diphenylbut - 2 -ene - 1,4 - dione (3) and 1,4 - diphenyl - 2 - (N - phenylbenzylamino)but - 2 - ene - 1,4 - dione (4). UV absorption data reveal that the adducts 1 and 3, formed from aniline and o-aminophenol, respectively, are the E-isomers, arising through a trans-mode of addition whereas the adducts 2 and 4, formed from piperidine and N-phenyl-benzylamine are the Z-isomers, formed through a cis-mode of addition.The reaction of N-phenaeylaniline with DBA gave 2,3 - dibenzoyl - 1,4 - diphenylpyrrole (5), whereas the reaction of 1,8 - diaminonaphthalene with DBA gave a mixture of products consisting of 2 - benzoyl - 2 - phenacyl -2,3 - dihydroperimidine (11) and 2 - benzoylperimidine (12). The reaction of 2-aminopyridine with DBA gave a mixture of two 1:1-adducts, 2 - (2 - imino - 1(2H) - pyridyl) - 1,4 - diphenylbut - 2 - ene - 1,4 - dione (14) and 1,4 -diphenyl - 2 - (N - 2 - pyridylamino)but - 2 - ene - 1,4 - dione (15).     

Synthesis, characterization and electrical properties of novel mono- and cofacial bisphthalocyanines bridged with four [1a,8b-dihydronaphtho[b]naphthofuro[3,2-d]furan-7,10-diyl] units

Novel mono phthalocyanines and cofacial bisphthalocyanines were synthesized from 4,4′-(1a,8b-dihydronaphtho[b]naphthofuro-[3,2-d]furan-7,10-diyl)bis(oxy)diphthalonitrile 1. The products were characterized by elemental analysis, UV-vis, IR, ¹H NMR and mass spectroscopy. Both the direct current (dc) and alternating current (ac) electrical properties of the product films were investigated as a function of temperature in the frequency range 40-10⁵ Hz. It was observed that the ac response of the films can be represented by the ω^s law. The temperature dependence of dc conductivity showed typical Arrhenius behavior for all compounds.