Highly selective synthesis and near-infrared photothermal conversion of metalla-Borromean ring and [2]catenane assemblies

Although the selective synthesis of complicated supramolecular architectures has seen significant progress in recent years, the exploration of the properties of these complexes remains a fascinating challenge. Herein, a series of new supramolecular topologies, metalla[2]catenanes and Borromean ring assemblies, were constructed based on appropriate Cp*Rh building blocks and two rigid alkynyl pyridine ligands (L1, L2) via coordination-driven self-assembly. Interestingly, minor differences between the two rigid alkynyl pyridine ligands with/without organic substituents led to products with dramatically different topologies. Careful structural analysis showed that π–π stacking interactions play a crucial role in stabilizing these [2]catenanes and Borromean ring assemblies, while also promoting nonradiative transitions and triggering photothermal conversion in both the solution and the solid states. These results were showcased through comparative studies of the NIR photothermal conversion efficiencies of the Borromean ring assemblies, [2]catenanes and metallarectangles, which exhibited a wide range of photothermal conversion efficiencies (12.64–72.21%). The influence of the different Cp*Rh building blocks on the NIR photothermal conversion efficiencies of their assemblies was investigated. Good photothermal conversion properties of the assemblies were also found in the solid state. This study provides a new strategy to construct valuable half-sandwich-based NIR photothermal conversion materials while also providing promising candidates for the further development of materials science.

The selective synthesis of three kinds of supermolecular topologies, molecular Borromean ring, [2]catenane and metallarectangle based on two alkynyl ligands is presented. Remarkably, the NIR photothermal conversion efficiency was found to improve as the π–π stacking increases.     

Porphyrin/Ionic‐Liquid Co‐assembly Polymorphism Controlled by Liquid–Liquid Phase Separation

Understanding and controlling multicomponent co‐assembly is of primary importance in different fields, such as materials fabrication, pharmaceutical polymorphism, and supramolecular polymerization, but these aspects have been a long‐standing challenge. Herein, we discover that liquid–liquid phase separation (LLPS) into ion‐cluster‐rich and ion‐cluster‐poor liquid phases is the first step prior to co‐assembly nucleation based on a model system of water‐soluble porphyrin and ionic liquids. The LLPS‐formed droplets serve as the nucleation precursors, which determine the resulting structures and properties of co‐assemblies. Co‐assembly polymorphism and tunable supramolecular phase transition behaviors can be achieved by regulating the intermolecular interactions at the LLPS stage. These findings elucidate the key role of LLPS in multicomponent co‐assembly evolution and enable it to be an effective strategy to control co‐assembly polymorphism as well as supramolecular phase transitions.     

A Supramolecular Radical Dimer: High‐Efficiency NIR‐II Photothermal Conversion and Therapy

Photothermal therapy at the NIR‐II biowindow (1000–1350 nm) is drawing increasing interest because of its large penetration depth and maximum permissible exposure. Now, the supramolecular radical dimer, fabricated by N,N′‐dimethylated dipyridinium thiazolo[5,4‐d]thiazole radical cation (MPT^.+) and cucurbit[8]uril (CB[8]), achieves strong absorption at NIR‐II biowindow. The supramolecular radical dimer (2MPT^.+‐CB[8]) showed highly efficient photothermal conversion and improved stability, thus contributing to the strong inhibition on HegG2 cancer cell under 1064 nm irradiation even penetrating through chicken breast tissue. This work provides a novel approach to construct NIR‐II chromophore by tailor‐made assembly of organic radicals. It is anticipated that this study provides a new strategy to achieve NIR‐II photothermal therapy and holds promises in luminescence materials, optoelectronic materials, and also biosensing.     

Supramolecular free radicals: near-infrared organic materials with enhanced photothermal conversion

A novel kind of supramolecular free radical with significantly improved free radical yield and enhanced near-infrared (NIR) photothermal conversion has been fabricated. Perylene diimide (PDI) can undergo chemical reduction to generate PDI radical anions. Cucurbit[7]uril (CB[7]), a bulky hydrophilic head, was utilized to encapsulate the two end groups of the PDI derivative via host–guest interactions, thus hindering its aggregation and suppressing the dimerization and quenching of PDI radical anions in aqueous solution. Due to the increased concentration of radical anions and their absorption above 800 nm, the efficiency of NIR photothermal conversion was significantly improved. Compared with free radicals fabricated by covalent chemistry, the supramolecular free radicals established here could provide a facile approach for the promoted formation of aromatic free radicals, thus opening up a new strategy for the design of NIR photothermal materials with enhanced photothermal conversion.     

A Molecular Strategy to Lock‐in the Conformation of a Perylene Bisimide‐Derived Supramolecular Polymer

Locking‐in the conformation of supramolecular assemblies provides a new avenue to regulate the (opto)electronic properties of robust nanoscale objects. In the present contribution, we show that the covalent tethering of a perylene bisimide (PBI)‐derived supramolecular polymer with a molecular locker enables the formation of a locked superstructure equipped with emergent structure–function relationships. Experiments that exploit variable‐temperature ground‐state electronic absorption spectroscopy unambiguously demonstrate that the excitonic coupling between nearest neighboring units in the tethered superstructure is preserved at a temperature (371 K) where the pristine, non‐covalent assembly exists exclusively in a molecularly dissolved state. A close examination of the solid‐state morphologies reveals that the locked superstructure engenders the formation of hierarchical 1D materials which are not achievable by unlocked assemblies. To complement these structural attributes, we further demonstrate that covalently tethering a supramolecular polymer built from PBI subunits enables the emergence of electronic properties not evidenced in non‐covalent assemblies. Using cyclic voltammetry experiments, the elucidation of the potentiometric properties of the locked superstructure reveals a 100‐mV stabilization of the conduction band energy when compared to that recorded for the non‐covalent assembly.     

Pillararene‐Based Assemblies: Design Principle,Preparation and Applications

In this review, we highlight recent advancements on pillararene‐based assemblies. The driving forces for the formation of the pillararene‐based assemblies are discussed first. The host–guest interactions are deemed as not only general strategy for constructing assemblies but also essential components for preventing the assemblies from the dissociation. Solvent effect is also important in the assembling process, since it could influence the host–guest interactions and provide solvophobic effect on pillararenes for the assembly. Then, several pillararene‐based assembly architectures are introduced, including pillararene‐based interlocked structures, such as (poly)pseudorotaxanes, (poly)rotaxanes, and daisy chains, classified by their topological structures and synthetic strategy. The morphologies of the supramolecular assemblies are divided into several types, for example, nanospheres, nanotubes and supramolecular polymers. Furthermore, the functions and potential applications are summarized accompanied with related assembly structures. The review not only provides fundamental findings, but also foresights future research directions in the research area of pillararene‐based assemblies.     

In Situ Controlled Construction of a Hierarchical Supramolecular Chiral Liquid‐Crystalline Polymer Assembly

Hierarchical supramolecular chiral liquid‐crystalline (LC) polymer assemblies are challenging to construct in situ in a controlled manner. Now, polymerization‐induced chiral self‐assembly (PICSA) is reported. Hierarchical supramolecular chiral azobenzene‐containing block copolymer (Azo‐BCP) assemblies were constructed with π–π stacking interactions occurring in the layered structure of Azo smectic phases. The evolution of chirality from terminal alkyl chain to Azo mesogen building blocks and further induction of supramolecular chirality in LC BCP assemblies during PICSA is achieved. Morphologies such as spheres, worms, helical fibers, lamellae, and vesicles were observed. The morphological transition had a crucial effect on the chiral expression of Azo‐BCP assemblies. The supramolecular chirality of Azo‐BCP assemblies destroyed by 365 nm UV irradiation can be recovered by heating–cooling treatment; this dynamic reversible achiral–chiral switching can be repeated at least five times.     

Transformation of Dipeptide‐Based Organogels into Chiral Crystals by Cryogenic Treatment

Controlled molecular assembly is an important approach for the synthesis of single‐component materials with diverse functions. Unlike traditional heat treatment or solvent modulation, cryogenic treatment at 77 K enabled the tunable transition of a self‐assembled diphenylalanine organogel into a hexagonal crystal. Under these conditions, the assembled molecules undergo an internal rearrangement in the solid state to form a well‐defined chiral crystal structure. Moreover, these assemblies exhibit enhanced emission. This strategy for the synthesis of single‐component supramolecular assemblies can create new functions by manipulating phase transitions.     

Host–Guest Binding‐Site‐Tunable Self‐Assembly of Stimuli‐Responsive Supramolecular Polymers

Despite the remarkable progress made in controllable self‐assembly of stimuli‐responsive supramolecular polymers (SSPs), a basic issue that has not been consideration to date is the essential binding site. The noncovalent binding sites, which connect the building blocks and endow supramolecular polymers with their ability to respond to stimuli, are expected to strongly affect the self‐assembly of SSPs. Herein, the design and synthesis of a dual‐stimuli thermo‐ and photoresponsive Y‐shaped supramolecular polymer (SSP2) with two adjacent β‐cyclodextrin/azobenzene (β‐CD/Azo) binding sites, and another SSP (SSP1) with similar building blocks, but only one β‐CD/Azo binding site as a control, are described. Upon gradually increasing the polymer solution temperature or irradiating with UV light, SSP2 self‐assemblies with a higher binding‐site distribution density; exhibits a flower‐like morphology, smaller size, and more stable dynamic aggregation process; and greater controllability for drug‐release behavior than those observed with SSP1 self‐assemblies. The host–guest binding‐site‐tunable self‐assembly was attributed to the positive cooperativity generated among adjacent binding sites on the surfaces of SSP2 self‐assemblies. This work is beneficial for precisely controlling the structural parameters and controlled release function of SSP self‐assemblies.     

Pathway Control in Cooperative vs. Anti‐Cooperative Supramolecular Polymers

Controlling the nanoscale morphology in assemblies of π‐conjugated molecules is key to developing supramolecular functional materials. Here, we report an unsymmetrically substituted amphiphilic Pt^II complex 1 that shows unique self‐assembly behavior in nonpolar media, providing two competing anti‐cooperative and cooperative pathways with distinct molecular arrangement (long‐ vs. medium‐slipped, respectively) and nanoscale morphology (discs vs. fibers, respectively). With a thermodynamic model, we unravel the competition between the anti‐cooperative and cooperative pathways: buffering of monomers into small‐sized, anti‐cooperative species affects the formation of elongated assemblies, which might open up new strategies for pathway control in self‐assembly. Our findings reveal that side‐chain immiscibility is an efficient method to control anti‐cooperative assemblies and pathway complexity in general.     

A Double Cation–π‐Driven Strategy Enabling Two‐Dimensional Supramolecular Polymers as Efficient Catalyst Carriers

The cation–π interaction is a strong non‐covalent interaction that can be used to prepare high‐strength, stable supramolecular materials. However, because the molecular plane of a cation‐containing group and that of aromatic structure are usually perpendicular when forming a cation–π complex, it is difficult to exploit the cation–π interaction to prepare a 2D self‐assembly in which the molecular plane of all the building blocks are parallel. Herein, a double cation–π‐driven strategy is proposed to overcome this difficulty and have prepared 2D self‐assemblies with long‐range ordered molecular hollow hexagons. The double cation–π interaction makes the 2D self‐assemblies stable. The 2D self‐assemblies are to be an effective carrier that can eliminate metal‐nanoparticle aggregation. Such 2D assembly/palladium nanoparticle hybrids are shown to exhibit recyclability and superior catalytic activity for a model reaction.     

An in situ Dynamic Continuum of Supramolecular Phosphoglycopeptides Enables Formation of 3D Cell Spheroids

Higher‐order assemblies of proteins, with a structural and dynamic continuum, is an important concept in biology, but these insights have yet to be applied in designing biomaterials. Dynamic assemblies of supramolecular phosphoglycopeptides (sPGPs) transform a 2D cell sheet into 3D cell spheroids. A ligand–receptor interaction between a glycopeptide and a phosphopeptide produces sPGPs that form nanoparticles, which transform into nanofibrils upon partial enzymatic dephosphorylation. The assemblies form dynamically and hierarchically in situ on the cell surface, and interact with the extracellular matrix molecules and effectively abolish contact inhibition of locomotion (CIL) of the cells. Integrating molecular recognition, catalysis, and assembly, these active assemblies act as a dynamic continuum to disrupt CIL, thus illustrating a new kind of biomaterial for regulating cell behavior.     

Hierarchical assembly of uranyl metallacycles involving macrocyclic hosts

Actinide metallacycles are an emerging class of functional coordination assemblies, but multi-level assembly from metallacycle units toward hierarchical supramolecular structures are still rarely investigated. In this work, we put forward a novel supramolecular inclusion-based method through introducing two macrocyclic hosts, cucurbit[7]uril (CB[7]) and cucurbit[8]uril (CB[8]) to facilitate hierarchical assembly of uranyl metallacycles with higher complexity, and successfully prepare two different kinds of uranyl metallacycle-based complexes with intriguing hierarchical structures, a CB[7]-based four-member molecular necklace ([4]MN) and a CB[8]-involved ring-in-ring supramolecular polymer chain. The results obtained here prove the feasibility of supramolecular inclusion for regulating coordination assembly of uranyl metallacycles and related hierarchical structures. It is believed that this method can be used to achieve the construction of actinide coordination assemblies with higher structural complexity.     

The effects of supramolecular assembly on exciton decay rates in organic semiconductors

We present time-resolved photoluminescence measurements on two series of oligo-p-phenylenevinylene (OPV) materials that are functionalized with quadruple hydrogen-bonding groups. These form supramolecular assemblies with thermotropic reversibility. The morphology of the assemblies depends on the way that the oligomers are functionalized; monofunctionalized OPVs (MOPVs) form chiral, helical stacks while bifunctionalized OPVs (BOPVs) form less organized structures. These are therefore model systems to investigate the effects of supramolecular assembly, the effects of morphology, and the dependence of oligomer length on the radiative and nonradiative rates of pi-conjugated materials. The purpose of this work is to use MOPV and BOPV derivatives as model systems to study the effect of intermolecular interactions on the molecular photophysics by comparing optical properties in the dissolved phase and the supramolecular assemblies. A simple photophysical analysis allows us to extract the intrinsic radiative and nonradiative decay rates and to unravel the consequences of interchromophore coupling with unprecedented detail. We find that interchromophore coupling strongly reduces both radiative and intrinsic nonradiative rates and that the effect is more pronounced in short oligomers.     

Artificial Multienzyme Supramolecular Device: Highly Ordered Self‐Assembly of Oligomeric Enzymes In Vitro and In Vivo

A strategy for scaffold‐free self‐assembly of multiple oligomeric enzymes was developed by exploiting enzyme oligomerization and protein–protein interaction properties, and was tested both in vitro and in vivo. Octameric leucine dehydrogenase and dimeric formate dehydrogenase were fused to a PDZ (PSD95/Dlg1/zo‐1) domain and its ligand, respectively. The fusion proteins self‐assembled into extended supramolecular interaction networks. Scanning‐electron and atomic‐force microscopy showed that the assemblies assumed two‐dimensional layer‐like structures. A fluorescence complementation assay indicated that the assemblies were localized to the poles of cells. Moreover, both in vitro and in vivo assemblies showed higher NAD(H) recycling efficiency and structural stability than did unassembled structures when applied to a coenzyme recycling system. This work provides a novel method for developing artificial multienzyme supramolecular devices and for compartmentalizing metabolic enzyme cascades in living cells.     

Controlling the Structure and Length of Self‐Synthesizing Supramolecular Polymers through Nucleated Growth and Disassembly

Directing self‐assembly processes out‐of‐equilibrium to yield kinetically trapped materials with well‐defined dimensions remains a considerable challenge. Kinetically controlled assembly of self‐synthesizing peptide‐functionalized macrocycles through a nucleation–growth mechanism is reported. Spontaneous fiber formation in this system is effectively shut down as most of the material is diverted into metastable non‐assembling trimeric and tetrameric macrocycles. However, upon adding seeds to this mixture, well‐defined fibers with controllable lengths and narrow polydispersities are obtained. This seeded growth strategy also allows access to supramolecular triblock copolymers. The resulting noncovalent assemblies can be further stabilized through covalent capture. Taken together, these results show that self‐synthesizing materials, through their interplay between dynamic covalent bonds and noncovalent interactions, are uniquely suited for out‐of‐equilibrium self‐assembly.     

Self‐assembly: An intriguing relationship between structures of metal complexes and shapes of ancient Chinese characters

Self‐assembly is a fundamental principle, which generates structural organization on all scales from molecules to galaxies. In the field of chemistry and materials science, the self‐assembly process driven by noncovalent interactions offers considerable advantages over the stepwise bond formation in the construction of large supramolecular assemblies with different sizes and shapes. The structures of metal clusters are mainly constructed from the assembly of mononuclear metal center to dinuclear, trinuclear species, and so on. It is of interest that Chinese ancient people also used this concept to create and encrypt characters. Herein, we report on an intriguing relationship between structures of metal complexes and the shapes of ancient Chinese characters, in which the self‐assembly principle is clearly demonstrated.     

Oligo(ethylene glycol)/alkyl‐modified Chromophore Assemblies for Photon Upconversion in Water

Molecular self‐assembly is a powerful means to construct nanoscale materials with advanced photophysical properties. Although the protection of the photo‐excited states from oxygen quenching is a critical issue, it still has been in an early phase of development. In this work, we demonstrate that a simple and typical molecular design for aqueous supramolecular assembly, modification of the chromophoric unit with hydrophilic oligo(ethylene glycol) chains and hydrophobic alkyl chains, is effective to avoid oxygen quenching of triplet–triplet annihilation‐based photon upconversion (TTA‐UC). While a TTA‐UC emission is completely quenched when the donor and acceptor are molecularly dispersed in chloroform, their aqueous co‐assemblies exhibit a clear upconverted emission in air‐saturated water even under extremely low chromophore concentrations down to 40 μm . The generalization of this nano‐encapsulation approach offers new functions and applications using oxygen‐sensitive species for supramolecular chemistry.     

Dual‐Controlled Macroscopic Motions in a Supramolecular Hierarchical Assembly of Motor Amphiphiles

Three‐dimensional unidirectionally aligned and responsive supramolecular hierarchical assemblies have much potential in adaptive materials for biomedical and soft actuator applications. However, to achieve systematical control of the motion of stimuli‐responsive materials by orthogonal external stimuli and to complete a series of complicated tasks remains a grand challenge. Herein, we demonstrate a novel designed hybrid supramolecular assembly of molecular motor amphiphiles that also serves as a template for iron nanoparticles growth, and as a consequence this soft hybrid material is orthogonally controlled by dual light/magnetic stimuli. Macroscopic motor amphiphile strings, decorated with iron nanoparticles, provide fast response photoactuations and magnet induced movements that allows a precisely controlled cargo transport process.     

Structure–function relationships of the supramolecular assembly of the bacterial photosynthetic antenna complexes in lipid membranes

Appropriate experimental platforms are required to clarify the structure–function relationships of membrane protein assemblies. In photosynthetic bacteria, light-harvesting complex 2 and light-harvesting/reaction center core complex play key roles in capturing and transferring light energy and facilitating subsequent charge separation. These photosynthetic apparatuses form a supramolecular assembly in the photosynthetic membrane. However, the mechanism through which this assembly influences the efficiency of energy conversion remains to be clarified. We review our recent studies that were conducted to evaluate the structure–function relationship of the supramolecular assembly of photosynthetic antenna complexes in various lipid bilayer systems, as well as the construction of novel systems of planar lipid membranes for use as experimental platforms.