Influence of NH<Subscript>3</Subscript>-treating temperature on visible light photocatalytic activity of N-doped P<Subscript>25</Subscript>-TiO<Subscript>2</Subscript>

The influence of NH₃-treating temperature on the visible light photocatalytic activity of N-doped P₂₅-TiO₂ as well as the relationship between the surface composition structure of TiO₂ and its visible light photocatalytic activity were investigated. The results showed that N-doped P₂₅-TiO₂ treated at 600°C had the highest activity. The structure of P₂₅-TiO₂ was converted from anatase to rutile at 700°C. Moreover, no N-doping was detected at the surface of P₂₅-TiO₂. There was no simply linear relationship between the visible light photocatalytic activity and the concentration of doped nitrogen, and visible light absorption. The visible light photocatalytic activity of N-doped P₂₅-TiO₂ was mainly influenced by the synergistic action of the following factors: (i) the formation of the single-electron-trapped oxygen vacancies (denoted as V_o^·); (ii) the doped nitrogen on the surface of TiO₂; (iii) the anatase TiO₂ structure.     

ESR study on the visible photocatalytic mechanism of nitrogen-doped novel TiO2: Synergistic effect of two kinds of oxygen vacancies

The visible photocatalytic mechanism of nitrogen-doped novel TiO₂ was studied by means of electron spin resonance spectroscopy (ESR). It was found that, under visible light irradiation, the concentration of single-electron-trapped oxygen vacancy (SETOV, V_o^•) of novel TiO₂ remained unchanged, but that of nitrogen-doped novel TiO₂ increased and returned to original state when the light was turned off. This implies that, aside from V_o^• in bulk of nitrogen-doped novel TiO₂, oxygen vacancy without trapped electron (V_o^••) was formed on its surface. V_o^•• as a surface electron trap captured photogenerated electron from the bulk to generate extra V_o^•, carrying out photocatalytic reaction on the surface. At the same time, nitrogen doping product NO was chemically adsorbed on the vicinity of V_o^•• and inhibited the attack of oxygen, allowing V_o^•• to remain stable in air. The synergistic action of the two kinds of active structures, i.e., bulk V_o^•–NO–Ti and surface V_o^••–NO–Ti, accounted for the visible photocatalytic activity of N-doped novel TiO₂.     

Facile Synthesis of Thermal‐ and Photostable Titania with Paramagnetic Oxygen Vacancies for Visible‐Light Photocatalysis

A novel dopant‐free TiO₂ photocatalyst (V_o^.‐TiO₂), which is self‐modified by a large number of paramagnetic (single‐electron‐trapped) oxygen vacancies, was prepared by calcining a mixture of a porous amorphous TiO₂ precursor, imidazole, and hydrochloric acid at elevated temperature (450 °C) in air. Control experiments demonstrate that the porous TiO₂ precursor, imidazole, and hydrochloric acid are all necessary for the formation of V_o^.‐TiO₂. Although the synthesis of V_o^.‐TiO₂ originates from such a multicomponent system, this synthetic approach is facile, controllable, and reproducible. X‐ray diffraction, XPS, and EPR spectroscopy reveal that the V_o^.‐TiO₂ material with a high crystallinity embodies a mass of paramagnetic oxygen vacancies, and is free of other dopant species such as nitrogen and carbon. UV/Vis diffuse‐reflectance spectroscopy and photoelectrochemical measurement demonstrate that V_o^.‐TiO₂ is a stable visible‐light‐responsive material with photogenerated charge separation efficiency higher than N‐TiO₂ and P25 under visible‐light irradiation. The V_o^.‐TiO₂ material exhibits not only satisfactory thermal‐ and photostability, but also superior photocatalytic activity for H₂ evolution (115 μmol h^?1 g^?1) from water with methanol as sacrificial reagent under visible light (λ>400 nm) irradiation. Furthermore, the effects of reaction temperature, ratio of starting materials (imidazole:TiO₂ precursor) and calcination time on the photocatalytic activity and the microstructure of V_o^.‐TiO₂ were elucidated.     

Photocatalytic activity of N-doped TiO2: photocatalytic synthesis of o-aminophenol at room temperature

The photocatalytic synthesis of o-aminophenol in methanol was investigated with N-doped TiO₂ nanoparticles under UV-light irradiation. The catalytic quantities of N-doped TiO₂ prepared by a simple modified sol–gel process with urea as nitrogen source rapidly reduced o-nitrophenol to the corresponding amine at room temperature.     

Photocatalytic Activity for Water Decomposition to Hydrogen over Nitrogen‐doped TiO2 Nanoparticle

Nitrogen-doped TiO2 nanoparticle photocatalysts were obtained by an annealing method with gaseous ammonia and nitrogen. The influence of dopant N on the crystal structure was characterized by XRD, XPS, BET, TEM and UV-Vis spectra. The results of XRD indicate that, the crystal phase transforms from anatase to rutile structure gradually with increase of annealing temperature from 300 to 700 ℃. XPS studies indicate that the nitrogen atom enters the TiO2 lattice and occupies the position of oxygen atom. Agglomeration of particles is found in TEM images after annealing. BET results show that the specific surface areas of N-doped samples from 44.61 to 38.27 m2/g are smaller than that of Degussa TiO2. UV-Vis spectra indicate that the absorption threshold shifts gradually with increase of annealing temperature, which shows absorption in the visible region. The influence of annealing condition on the photocatalytic property has been researched over water decomposition to hydrogen, indicating that nitrogen raises the photocatalytic activity for hydrogen evolution, and the modified TiO2 annealed for 2 h at 400 ℃ under gas of NH3/N2 (V/V＝1/2) mixture shows better efficiency of hydrogen evolution. Furthermore, the N-doped TiO2 nanoparticle catalysts have obvious visible light activity, evidenced by hydrogen evolution under visible light (λ＞400 nm) irradiation. However, the catalytic activity under visible light irradiation is absent for Degussa as reference and the N-doped TiO2 annealed at 700 ℃.     

Photocatalytic activity of nitrogen and copper doped TiO2 nanoparticles prepared by microwave-assisted sol-gel process

Cu and N-doped TiO₂ photocatalysts were synthesized from titanium (IV) isopropoxide via a microwave-assisted sol-gel method. The synthesized materials were characterized by X-ray diffraction, UV-vis diffuse reflectance, photoluminescence (PL) spectroscopy, SEM, TEM, FT-IR, Raman spectroscopy, photocurrent measurement technique, and nitrogen adsorption–desorption isotherms. Raman spectra and XRD showed an anatase phase structure. The SEM and TEM images revealed the formation of an almost spheroid mono disperse TiO₂ with particle sizes in the range of 9-17 nm. Analysis of N₂ isotherm measurements showed that all investigated TiO₂ samples have mesoporous structures with high surface areas. The optical absorption edge for the doped TiO₂ was significantly shifted to the visible light region. The photocurrent and photocatalytic activity of pure and doped TiO₂ were evaluated with the degradation of methyl orange (MO) and methylene blue (MB) solution under both UV and visible light illumination. The doped TiO₂ nanoparticles exhibit higher catalytic activity under each of visible light and UV irradiation in contrast to pure TiO₂. The photocatalytic activity and photocurrent ability of TiO₂ have been enhanced by doping of the titania in the following order: (Cu, N) - codoped TiO₂ > N-doped TiO₂ > Cu-doped TiO₂ > TiO₂. COD result for (Cu, N)-codoped TiO₂ reveals ∼92% mineralization of the MO dye on six h of visible light irradiation.     

Probing the Electronic Structure and Photoactivation Process of Nitrogen‐Doped TiO2 Using DRS,PL, and EPR

The electronic structure and photoactivation process in N‐doped TiO₂ is investigated. Diffuse reflectance spectroscopy (DRS), photoluminescence (PL), and electron paramagnetic resonance (EPR) are employed to monitor the change of optical absorption ability and the formation of N species and defects in the heat‐ and photoinduced N‐doped TiO₂ catalyst. Under thermal treatment below 573 K in vacuum, no nitrogen dopant is removed from the doped samples but oxygen vacancies and Ti³⁺ states are formed to enhance the optical absorption in the visible‐light region, especially at wavelengths above 500 nm with increasing temperature. In the photoactivation processes of N‐doped TiO₂, the DRS absorption and PL emission in the visible spectral region of 450–700 nm increase with prolonged irradiation time. The EPR results reveal that paramagnetic nitrogen species (N_s^.), oxygen vacancies with one electron (V_o^.), and Ti³⁺ ions are produced with light irradiation and the intensity of N_s^. species is dependent on the excitation light wavelength and power. The combined characterization results confirm that the energy level of doped N species is localized above the valence band of TiO₂ corresponding to the main absorption band at 410 nm of N‐doped TiO₂, but oxygen vacancies and Ti³⁺ states as defects contribute to the visible‐light absorption above 500 nm in the overall absorption of the doped samples. Thus, a detailed picture of the electronic structure of N‐doped TiO₂ is proposed and discussed. On the other hand, the transfer of charge carriers between nitrogen species and defects is reversible on the catalyst surface. The presence of oxygen‐vacancy‐related defects leads to quenching of paramagnetic N_s^. species but they stabilize the active nitrogen species N_s^?.     

Sol–gel synthesized vanadium doped TiO2 photocatalyst: physicochemical properties and visible light photocatalytic studies

Vanadium doped titanium dioxide (V–TiO₂) photocatalyst was synthesized by the sol–gel method using ammonium vanadate as vanadium source. The prepared samples were characterized by XRD, N₂ adsorption–desorption method, UV–Vis DRS, Fourier transform infrared (FTIR), scanning electron microscope–energy dispersive X-ray and photoluminescence (PL) analysis. The results show that V⁵⁺ ions were successfully incorporated into the crystal lattice of TiO₂ as a consequence, not only an obvious decrease in the band gap and a red shift of the absorption threshold into the visible light region was recorded for the V modified TiO₂, but, also a decrease in photogenerated electrons and holes recombination rate was observed as demonstrated by PL analysis. FTIR study indicated that in undoped TiO₂ sample the acetate group favored a bidentate bridging mode of binding with titanium atoms, whereas a bidentate chelating mode of linkage was observed in V–TiO₂ powders. The crystallite size of the samples calcined at 300 and 500 °C were decreased beyond the molar ratio of 200:1 (V:Ti), this may be due to dopant presence in the grain boundaries hindering the crystal growth. The photocatalytic activities for both pure and vanadium doped TiO₂ powders were tested in the discoloration of a reactive dyestuff, methylene blue, under visible light. The 100:1 (V:Ti) doped photocatalyst, calcined at 300 °C showed enhanced photocatalytic activity under visible light with a rate constant (k_obs) of 5.024 × 10^?3 min^?1 which is nearly five times higher than that of pure TiO₂, as result of low band gap value, high specific surface area and a decrease in recombination rate.     

Synthesis and Characterization of Novel N-doped TiO2 Photocatalyst with Visible Light Active

A novel N-doped TiO₂ (N₁-N₂-TiO₂) with substitutional and interstitial N impurities simul-taneously was successfully synthesized.The catalyst was characterized by X-ray diffraction,X-ray photoelectron spectroscopy, diffuse reflectance spectroscopy, photoluminescence, and electron paramagnetic resonance. The results demonstrated that the nitrogen was substi-tuted for the lattice oxygen atoms, and was also interstitially doped into the TiO₂ lattice.The photocatalytic tests indicated that the N₁-N₂-TiO₂ showed the highest photocatalytic activities of all the N-doped TiO₂ under visible light, attributing to the synergetic effect of substitutional and interstitial nitrogen of N-doped TiO₂.     

Novel sol–gel synthesis of N-doped TiO<Subscript>2</Subscript> hollow spheres with high photocatalytic activity under visible light

Novel ammonia and triethanolamine assisted sol–gel synthesis method was developed to fabricate the N-doped TiO₂ hollow spheres. The prepared hollow spheres were in submicron size and had good morphology and high specific surface area. Polystyrene (PS) latexes in size of 470 nm were used as the templates to fabricate PS/TiO₂ core–shell spheres. Here ammonia and triethanolamine was first employed together to control the sol–gel process. The N-doped TiO₂ hollow spheres were got after calcinations of the core–shell spheres by using triethanolamine as N source, and the amount of doped N could be easily adjusted by changing the amount of triethanolamine. The hollow spheres had distinct visible light response, and the optical response shifted more to the visible region as the amount of doped N increases. The photodegradation of methylene blue expressed the high photocatalytic activity of the N-doped TiO₂ hollow spheres under visible light.     

Zr离子掺杂TiO2可见光催化剂光催化活性的研究

本文采用溶胶-凝胶法制备了Zr离子掺杂TiO₂光催化剂。光催化降解对氯苯酚实验表明,Zr离子掺杂浓度为10%时活性最高,其紫外光、可见光催化活性分别是纯TiO₂的1.5倍和4倍。利用XRD、Raman、XPS、UV-Vis DRS、PL等技术对样品进行了表征,结果表明：Zr离子以取代式掺杂方式进入TiO₂晶格,在TiO₂导带下方形成掺杂能级,增强了可见光响应,促进了光生载流子的分离,此外Zr离子掺杂在催化剂表面引入大量表面缺陷,增加了表面羟基物种,从而使得Zr离子掺杂TiO₂光催化剂的紫外、可见光催化活性显著提高。     

Understanding the synergistic effects,optical and electronic properties of ternary Fe/C/S‐doped TiO2 anatase within the DFT + U approach

Although TiO₂ is an efficient photocatalyst, its large band gap limits its photocatalytic activity only to the ultraviolet region. An experimentally synthesized ternary Fe/C/S‐doped TiO₂ anatase showed improved visible light photocatalytic activity. However, a theoretical study of the underlying mechanism of the enhanced photocatalytic activity and the interaction of ternary Fe/C/S‐doped TiO₂ has not yet been investigated. In this study, the defect formation energy, electronic structure and optical property of TiO₂ doped with Fe, C, and S are investigated in detail using the density functional theory + U method. The calculated band gap (3.21 eV) of TiO₂ anatase agree well with the experimental band gap (3.20 eV). The defect formation energy shows that the co‐ and ternary‐doped systems are thermodynamically favorable under oxygen‐rich condition. Compared to the undoped TiO₂, the absorption edge of the mono‐, co‐, and ternary‐doped TiO₂ is significantly enhanced in the visible light region. We have shown that ternary doping with C, S, and Fe induces a clean band structure without any impurity states. Moreover, the ternary Fe/C/S‐doped TiO₂ exhibit an enhanced photocatalytic activity, a smaller band gap and negative formation energy compared to the mono‐ and co‐doped systems. Moreover, the band edges of Fe/C/S‐doped TiO₂ align well with the redox potentials of water, which shows that the ternary Fe/C/S‐doped TiO₂ is promising photocatalysts to split water into hydrogen and oxygen. These findings rationalize the available experimental results and can assist the design of TiO₂‐based photocatalyst materials.     

A novel approach for the synthesis of visible-light-active nanocrystalline N-doped TiO2 photocatalytic hydrosol

A visible-light-active nitrogen doped nanocrystalline titanium dioxide (N–TiO₂) hydrosol was prepared by precipitation–peptization method and following with hydrothermal crystallization at 110 °C holding for 6 h. XPS results show that nitrogen ions have been doped into the TiO₂ lattice successfully and the UV–Vis absorption spectra indicate that the light absorption edge of the N-doped TiO₂ has been red-shifted into visible light region. The photocatalytic performance of the N-doped TiO₂ thin film prepared from the synthesized hydrosol was evaluated by photodegrading the gaseous formaldehyde (HCHO) under visible light irradiation. The photodegradation ratio of HCHO reached up to 90% within 24 h and the degradation ratio was stable for ten degradation cycles, indicating the prepared hydrosol has good reusable performance in photodegrading gaseous pollutants.     

Fe2BiTaO7纳米催化剂的组织结构及光催化性能

用固相反应合成法合成了光催化剂Fe2BiTaO7,通过XRD、SEM、TEM、紫外-可见漫反射等表征方法对其组织结构及光催化性能进行了研究。结果表明Fe2BiTaO7为立方晶系烧绿石结构,空间群为Fd3m,禁带宽度为1.72 e V。通过比较Fe2BiTaO7、P25TiO2、掺氮Ti O2和Bi2In Ta O7的可见光光催化降解罗丹明B,发现Fe2BiTaO7降解效果及催化活性均高于其它催化剂,并且Fe2BiTaO7降解罗丹明B效率是掺氮二氧化钛的1.5倍。Fe2BiTaO7降解罗丹明B的曲线符合一级动力学,一级动力学常数为0.022 93 min-1。研究了罗丹明B可能的降解路径和Fe2BiTaO7在可见光下降解苯酚的效果。Fe2BiTaO7(可见光)光催化剂系统适用于纺织工业废水处理。     

Sulfur and Ti3+ co‐Doping of TiO2 Nanotubes Enhance Photocatalytic H2 Evolution Without the Use of Any co‐catalyst

TiO₂ nanotubes were successfully co‐doped with sulfur and Ti³⁺ states using a facile annealing treatment in H₂/H₂S gas mixture. The obtained nanotubes were investigated for their photocatalytic performance and characterized by SEM, XRD, XPS, EPR, IPCE, IMPS and Mott‐Schottky measurements. The synthesized co‐doped TiO₂ nanotubes show an enhanced photocatalytic hydrogen production rate compared to tubes that were treated only in pure H₂ or H₂S atmosphere—this without the presence of any co‐catalyst. It was found that sulfur in co‐doped TiO₂ exists in the form of S^2? and a small quantity of S⁴⁺/S⁶⁺, which leads to a narrowing of the band gap. However, the enhanced absorption of light in the visible range is not the key reason for the improved photocatalytic performance. We ascribe the enhanced photocatalytic activity to a synergetic effect of S mid‐gap states and disordered Ti³⁺ defects that facilitate photo generated electron transfer.     

Characterization of Titanium Dioxide Doped with Nitrogen and Sulfur and its Photocatalytic Appraisal for Degradation of Phenol and Methylene Blue

The degradation of organic dyes in the presence of modified TiO₂ is still under intensive investigation. We report here an evaluation of the photocatalytic activity of nitrogen‐ (N‐) and sulfur‐ (S‐) doped TiO₂ for the degradation of phenol and methylene blue (MB). N‐doped TiO₂ (N–TiO₂), S‐doped TiO₂ (S–TiO₂), and N–S‐doped TiO₂ (N–S–TiO₂) were prepared using the sol–gel method. The photocatalytic activity was evaluated in a batch reactor using phenol and MB as models of pollutants. In addition, this investigation was performed using a household lamp as the visible light source. Properties of the synthesized materials in terms of Brunauer–Emmett–Teller (BET) surface analysis, field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), and photocatalytic ability were examined. Our study shows that N–S–TiO₂ exhibits better photocatalytic degradation ability for all the considered dyes compared to the other doped TiO₂ materials. In conclusion, we have successfully prepared and evaluated the photocatalytic activity of N‐ and S‐doped TiO₂ for the degradation of phenol and MB using an ordinary household lamp.     

TiO2基固体超强酸的制备及光催化性能研究

半导体氧化物TiO2对很多有机污染物吸附较强、催化氧化活性高,因此它在环境污染治理方面扮演极其重要的角色,被广泛用于光催化处理多种有机物,但常规二氧化钛半导体光催化剂较低的量子效率(约4%)使其应用受到一定程度的制约[1]。1979年H ino[2]等首次报道无卤素型SO42-/M xO y固体超强酸体系以来,引起化学工作者极大关注。固体超强酸催化剂如SO42-/TiO2,SbF5/SiO2/TiO2等是一类新型酸催化剂,广泛用于酯化反应、苯衍生物烷基化、烯烃齐聚等。研究发现,基于SO42-改性的TiO2固体超强酸催化剂对于有机物具有较高的光催化氧化活性[3,4],…     

The preparation and characterization of La doped TiO2 nanoparticles and their photocatalytic activity

In this paper, pure and La doped TiO₂ nanoparticles with different La content were prepared by a sol-gel process using Ti (OC₄H₉)₄ as raw material, and also were characterized by XRD, TG-DTA, TEM, XPS, DRS and Photoluminescence (PL) spectra. We mainly investigated the effects of calcining temperature and La content on the properties and the photocatalytic activity for degrading phenol of as-prepared TiO₂ samples, and also discussed the relationships between PL spectra and photocatalytic activity as well as the mechanisms of La doping on TiO₂ phase transformation. The results showed that La³⁺ did not enter into the crystal lattices of TiO₂ and was uniformly dispersed onto TiO₂ as the form of La₂O₃ particles with small size, which possibly made La dopant have a great inhibition on TiO₂ phase transformation; La dopant did not give rise to a new PL signal, but it could improve the intensity of PL spectra with a appropriate La content, which was possibly attributed to the increase in the content of surface oxygen vacancies and defects after doping La; La doped TiO₂ nanoparticles calcined at 600°C exhibited higher photocatalytic activity, indicating that 600°C was an appropriate calcination temperature. The order of photocatalytic activity of La doped TiO₂ samples with different La content was as following: 1>1.5>3>0.5>5>0 mol%, which was the same as the order of their PL intensity, namely, the stronger the PL intensity, the higher the photocatalytic activity, demonstrating that there were certain relationships between PL spectra and photocatalytic activity. This could be explained by the points that PL spectra mainly resulted from surface oxygen vacancies and defects during the process of PL, while surface oxygen vacancies and defects could be favorable in capturing the photoinduced electrons during the process of photocatalytic reactions.     

Photocatalytic degradation of trichloroethylene using N-doped TiO<Subscript>2</Subscript> prepared by a simple sol–gel process

Visible-light-driven N-doped TiO₂ was prepared by a simple sol–gel process using nitric acid not only as the acid catalyst of the sol–gel reaction but also as the source of nitrogen. The photocatalytic performance of the N-doped TiO₂ was investigated by using FTIR spectroscopy to monitor the degradation of trichloroethylene (TCE) during UV and visible irradiation. The photocatalytic degradation of TCE was well-reproduced several times. The activity of Ti–O–N species was supported experimentally. The N-doped TiO₂ was found to be responsive to visible light and was stable during repeated runs and maintained the nitrogen species and its activity for at least four months.     

Synthesis of iron-containing nitrogen-doped titania by hydrothermal method and its photocatalytic activity

By a hydrothermal method, iron and nitrogen co-doped TiO₂ and iron oxide impregnated nitrogen-doped TiO₂ were prepared. The obtained Fe and N co-doped TiO₂ showed mixed anatase, rutile, and brookite phases, and high specific surface areas above 160 m²/g. The Fe co-doping was proved to be effective to enhance the visible light absorption ability; however, the photocatalytic activity in deNO _x experiment decreased due to the increase in the amount of lattice vacancy. On the other hand, the photocatalytic activity of N-doped TiO₂ was improved by the impregnation of iron oxide.