Sol-gel synthesis of titanium dioxide and titanium dioxide-hydroxypropyl cellulose hybrid material and electrorheological characteristics of their dispersions in poly(dimethylsiloxane)

Particles of titanium dioxide and titanium dioxide-hydroxypropyl cellulose organic-inorganic composite are synthesized by the sol-gel method. The effects of an electric field on the shear stress, viscosity, tensile and compression stresses of dispersions of titanium dioxide, the hybrid material, and titanium dioxide-hydroxypropyl cellulose mechanical mixture are investigated. It is established that the value of the electrorheological effect observed for hybrid material dispersions is higher than that for dispersions of titanium dioxide and mechanical mixtures of the materials.     

Nanoporous silica films containing aluminum and titanium

By utilizing surfactant aggregates as supramolecular templates, mesoporous and mesostructured silicas with highly ordered structures became available. The resulting mesoporous silicas are promising candidates to host various photo- and electro-active species along with catalytically active species, due to their large and controllable pore sizes, highly ordered pore arrangements with low dimensional geometries, and reactive surfaces. We have developed the rapid solvent evaporation method, which is a modified sol-gel process, for synthesizing the mesostructured silica-surfactant films as well as the mesoporous silica films. Supported thin films, self-standing films and bubbles of mesoporous silicas have been synthesized by the rapid solvent evaporation method. The microstructures of the films have also been successfully controlled by changing the synthetic conditions. Taking advantage of the ease of synthetic operation and the transparency and homogeneity of the resulting materials, we have been interested in the introduction of functional units into the mesostructured materials. This paper reports the synthesis of transparent films of titanium- and aluminum-containing nanoporous silicas to modify the surface properties (such as adsorptive and catalytic) of nanoporous silicas. The incorporation of Al led to the formation of cation exchange or acidic sites on the mesopore surface, as revealed by the cationic dye adsorption experiments. The photocatalytic reactions of the Ti-containing nanoporous silica films were also examined.     

Influence of the temperature-time conditions on the textural and structural properties of mesoporous silicon dioxide synthesized in an ammonia-alcohol medium

The conditions for the formation of mesostructural silica materials (MSMs) in the ammonia-alcohol media were determined. Mesoporous silicon dioxide was synthesized by the template liquid-phase condensation method at high concentrations of the surfactant. The effect exerted by temperature and time of the synthesis, autoclaving, and by organosilane additive [(trimethylsiloxy)silane] used in synthesis on the structural and textural properties of the mesoporous material was determined. The temperature-time conditions for the preparation of mesostructured silicon dioxide were optimized.     

Mesoporous Silica Layer: Preparation and Opportunity

Periodic mesoporous silicas, which were prepared from silica‐surfactant mesostructured materials, have been investigated for a wide range of application due to their very large surface area, high porosity, pore size uniformity and variation, periodic pore arrangement and possible pore surface modification, after the pioneering papers on the formation of mesoporous silicas (MCM‐41 and FSM‐16). Morphosyntheses from such macroscopic morphologies as bulk monolith and film to nanoscopic ones, nanoparticles and their stable suspension, make mesoporous materials more attractive for applications and detailed characterization. Mesoporous silicas have been studied initially for such applications as adsorbent and catalyst, and more recently, optical, electronic, and bio‐related applications have been investigated. This review summarizes the studies on mesoporous silica film to highlight the present status and future of the preparation, characterization and application of the mesoporous silica film.     

Block copolymer-templated mesoporous oxides

Block copolymers (BC) are indeed suitable and versatile templates for the creation of mesostructured and mesoporous materials. Great advances have been achieved in the last 3 years. Nowadays, it is possible to obtain highly controlled large-pore and highly stable mesostructured and mesoporous materials (silica, non-silica oxides, carbons,…) shaped as powders, films, monoliths or aerosols. This paper reviews mainly the synthesis of BC-templated mesostructured oxides, stressing in the physical, chemical and processing parameters, which have to be thoroughly controlled to reproducibly obtain mesoporous materials.     

Photoprocesses in mesoporous silicas prepared by a supramolecular templating approach

Mesoporous solids derived from inorganic–surfactant mesostructured materials have been investigated extensively from both fundamental and practical viewpoints owing to their unusually high surface area and porosity, ordered pore arrangements, pore size uniformity, as well as possible surface engineering. These characteristic features of the mesoporous solids have motivated research to apply them practically. This class of materials was originally expected to find applications as adsorbents and catalysts, while other advanced materials applications such as in optics/electronics became a field of interest after their successful fabrication in controlled morphology. This review article summarizes the studies on the photochemistry and photophysics of guest species occluded in mesoporous silicas in order to highlight the characteristic features of the mesostructured and mesoporous solids and their potential for optical applications.     

功能模板导向的自组装合成介孔结构有机／无机复合材料

回顾了近年来硅基介孔材料有机功能化的基本方法和研究进展．基于作者的相关研究工作,着重介绍一种新型的介孔氧化硅有机功能化的方法——功能模板导向的自组装法,阐述了该方法在自组装合成新型有机／无机复合材料方面的应用．     

有序介孔硅胶及其复合材料作固定相在液相色谱中的应用

系统地介绍了有序介孔硅胶及其复合材料的研究进展。重点评述了颗粒状无机介孔硅胶材料、颗粒状有机-无机复合介孔硅胶材料、手性介孔硅胶材料和整块介孔硅胶材料在用作液相色谱固定相方面的最新进展。对硅基有序介孔材料制备方面存在的问题进行了分析,并就该领域今后的发展趋势做了展望。     

陈化温度和pH值对氨基功能化介孔氧化硅吸附CO_2性能的影响

本研究采用溶胶-凝胶法,分别以十二烷基肌氨酸钠、氨丙基三甲氧基硅烷(APTMS)和正硅酸乙酯(TEOS)为结构导向剂(SDA)、共结构导向剂(CSDA)和硅源合成了氨基功能化的介孔氧化硅预产物。利用乙醇和乙醇胺混合液对预产物进行萃取后获得氨基功能化介孔氧化硅。利用红外光谱、元素分析、N2吸-脱附、透射电镜等手段对材料进行了表征。红外光谱结果证明通过萃取方法可较好地去除表面活性剂;N2吸附结果表明所有样品都具有介孔结构;元素分析和透射电镜结果说明反应陈化温度、pH值等合成条件对材料孔道内表面的氨基含量和材料结构有较大的影响。CO2吸附实验证明在低陈化温度、相对较低的pH值下合成的材料具有较高的CO2吸附量。     

有机-无机杂化氧化硅基介孔材料

有机基团可以通过嫁接或共聚的方法引入到氧化硅基介孔材料的孔表面或材料的骨架中,形成表面结合型和桥键型两大类有机-无机杂化氧化硅基介孔材料.本文综述了有机-无机杂化氧化硅基介孔材料的最新研究进展,介绍了其合成方法、应用及潜在的应用领域,详细总结了目前已报道的有机-无机杂化氧化硅基介孔材料的种类,展望了桥键型有机-无机杂化氧化硅基介孔材料的发展及应用前景.     

Photocatalytic activity of structured mesoporous TiO2 materials

Starting from colloidal TiO2 nanoparticles in combination with tetraethyl orthosilicate using neutral Pluronic or cationic cetyltrimethylammonium as templates, a series of structured mesoporous silicas has been obtained. The structure of the mesoporous titania was confirmed by isothermal gas adsorption, transmission electron microscopy, and X-ray diffraction. The pore diameter ranged between 3.8 and 10.9 nm, and the BET surface area varied from 99 to 584 m2 g(-1). The photocatalytic activity of these samples for the degradation of phenol in aqueous solution has been compared with that of standard P-25 TiO2. Even though the activity of these new mesostructured materials is lower that those found for P-25 TiO2, the turnover frequency of the photocatalytic activity (moles of phenol degraded per Ti atom present at initial reaction time) is much higher for the mesoporous titania, particularly with low titanium contents for those materials (mpTiO2-5 and TiO2SBA15-5).     

Modification of MCM-48-, SBA-15-, MCF-, and MSU-type mesoporous silicas with transition metal oxides using the molecular designed dispersion method

Four various mesoporous silicas (MCM-48, SBA-15, MCF, and MSU) were modified by the molecular designed dispersion method using Fe(acac)3, Cr(acac)3, and Cu(acac)2 complexes. The deposition was performed at the same concentration of the metal acetylacetonate (acac) complex in a toluene solution. All as-synthesized samples were investigated by diffuse reflectance infrared Fourier transform spectroscopy, Fourier transform infrared photoacoustic spectroscopy, and thermogravimetric analysis. The calcined materials were studied with respect to their textural properties (Brunauer-Emmett-Teller adsorption isotherm) and chemical composition (electron microprobe analysis). It allowed elucidation of the mechanism of interaction between the acac complex and the silanol groups. For the MCM-48, SBA-15, and MCF materials, the formation of hydrogen bonding was found for the chromium- and copper-modified samples, whereas the Fe-containing materials showed the ligand exchange mechanism. The strong interaction of the MSU support and the different acetylacetonate complexes, resulting in a loss of at least one acac ligand, was observed. The mesoporous silicas modified with transition metal oxides were studied by UV-vis-DR spectroscopy. The different metal dispersions were found for the samples containing various transition metal oxides.     

以阴离子表面活性剂/阳离子聚铵复合胶束为模板合成有序介孔二氧化硅

基于静电作用, 阴离子表面活性剂可与阳离子聚铵组装形成复合胶束. 借助阳离子聚铵,复合胶束可以作为模板与硅源协同组装, 形成高度有序的介孔二氧化硅. 本文通过调变不同种类阴离子表面活性剂、合成体系pH值、合成温度及阳离子聚铵和硅源用量等因素, 合成了具有不同介观结构和形貌的介孔二氧化硅. 实验证实阴离子表面活性剂/阳离子聚铵复合胶束模板法是合成介孔二氧化硅的一种通用方法.     

Facile one-pot synthesis of mesoporous heteropolyacids-silica hybrid for catalytic wet hydrogen peroxide oxidation of phenol

The fabrication of molybdovanadophosphoric acids incorporated into SBA-15 mesoporous silicas has been achieved via a one-pot procedure. The as-obtained composite materials were well characterized by XRD, TEM, and nitrogen adsorption–desorption which indicated that the composite materials possessed good mesoporous character. FT-IR, ICP showed molybdovanadophosphoric acids had been successfully incorporated into SBA-15 mesoporous silicas with intact structure of Keggin units. Due to well dispersion of the Keggin units, high structural stability, and low leaching level of active Keggin units, the obtained-catalysts systems showed significant catalytic efficiency and reusability for wet hydrogen peroxide oxidation of phenol.     

Synthesis of ordered mesoporous materials using surfactant liquid crystals or micellar solutions

Formation of ordered mesoporous materials using surfactant templating proceeds via mechanisms relying on optimising interactions between the inorganic and organic components of the synthesis. For oxides, the rates of hydrolysis and condensation of the inorganic species relative the rate of assembly of the mesostructure is crucial. Synthetic strategies to control these factors have been reviewed and it appears that mesostructured silica can be prepared in most phases found in binary surfactant–water systems by optimising the volume fraction of the surfactant and the hydrolysed inorganic precursor.     

Morphological and structural evolution of mesoporous silicas in a mild buffer solution and lysozyme adsorption

Mesoporous silicas with various morphologies and structures were synthesized with the aid of 2,2,4-trimethylpentane (TMP) in the presence of nonionic surfactant P123 [(EO)20(PO)70(EO)20] as a structure-directing agent under mild reaction conditions (HAc-NaAc buffer solution, pH 4.4). The ropelike particles formed by end-to-end interconnected nanorods were obtained at a TMP/P123 weight ratio of 0.5. It is noteworthy to mention that the mesoporous nanorods have channels running parallel to the short axis. The silica hollow spheres can be obtained at a higher TMP/P123 weight ratio because of the fusion of the primary nanorods around the interface of the O/W emulsion. Initial synthesis temperatures of 15, 25, and 40 degrees C can lead to mesoporous silicas with highly ordered 2D hexagonal mesostructure, vesicular mesostructure, and mesostructured cellular foams (MCF), respectively. The mesoporous silicas exhibit high adsorption capacity (up to 536 mg g(-1)) and very rapid (<5 min to reach equilibrium) lysozyme immobilization. More importantly, it is revealed that mesoporous silica hollow spheres with rugged surfaces can greatly accelerate the adsorption rate of the enzyme during the adsorption process.     

Mesoporous silica hybrid membranes for precise size-exclusive separation of silver nanoparticles

One-dimensional (1D) nanomaterials have unique applications due to their inherent physical properties. In this study, hexagonally ordered mesoporous silica hybrid anodic alumina membranes (AAM) were synthesized using template-guided synthesis with a number of nonionic n-alkyl-oligo(ethylene oxide), Brij-type (C(x)EO(y)), which are surfactants that have different molecular sizes and characteristics. The hexagonal mesoporous silicas are vertically aligned in the AAM channels with a predominantly columnar orientation. The hollow mesostructured silicas had tunable pore diameters varying from 3.7 to 5.1 nm. In this synthesis protocol, the surfactant molecular natures (corona/core features) are important for the controlled generation of ordered structures throughout AAM channels. The development of ultrafiltration membranes composed of silica mesostructures could be used effectively in separating silver nanoparticles (Ag NPs) in both aqueous and organic solution phases. This would be relevant to the production of well-defined Ag NPs with unique properties. To create a size-exclusive separation system of Ag NPs, we grafted hydrophobic trimethylsilyl (TMS) groups onto the inner pores of the mesoporous silica hybrid AAM. The immobilization of the TMS groups allowed the columnar mesoporous silica inside AAM to retain this inner pore order without distortion during the separation of solution-phase Ag NPs in organic solvents that may cause tortuous-pore membranes. Mesoporous TMS-silicas inside 1D AAM channels were applicable as a size-exclusive separation system to isolate organic solution-phase Ag NPs of uniform morphology and size.     

Electroanalytical Applications of Microporous Zeolites and Mesoporous (Organo)Silicas: Recent Trends

Microporous zeolites and ordered mesoporous (organo)silicas have been widely used as electrode modifiers because of their attractive properties (ion exchange and size selectivity of zeolites, well ordered nanoreactors containing a high number of widely accessible active centers in mesoporous (organo)silicas). These properties have been intelligently combined to selected redox processes to improve the response of the resulting modified electrodes or to design novel electrochemical detection schemes. This up‐to‐date review provides the recent advances made in the electroanalytical applications of zeolite modified electrodes and discusses the interest of ordered mesoporous (organo)silica materials in electroanalysis.     

垂直取向介孔薄膜的制备

垂直取向介孔薄膜是指薄膜内部孔道垂直于基底定向排列的一类介孔薄膜,其在催化、吸附与分离、化学传感器、太阳能电池等领域具有广阔的应用前景。本文就近几年内垂直取向介孔薄膜的制备方法以及在若干领域的应用进行了回顾和综述。在此基础上,对这种特殊的薄膜材料未来的发展进行了展望。     

MCM-48-like large mesoporous silicas with tailored pore structure: facile synthesis domain in a ternary triblock copolymer-butanol-water system

Assembly of mesostructured silica using Pluronic P123 triblock copolymer (EO(20)-PO(70)-EO(20)) and n-butanol mixture is a facile synthesis route to the MCM-48-like ordered large mesoporous silicas with the cubic Iad mesostructure. The cubic phase domain is remarkably extended by controlling the amounts of butanol and silica source correspondingly. The extended phase domain allows synthesis of the mesoporous silicas with various structural characteristics. Characterization by powder X-ray diffraction, nitrogen physisorption, scanning electron microscopy, and transmission electron microscopy reveals that the cubic Iad materials possess high specific surface areas, high pore volumes, and readily tunable pore diameters in narrow distribution of sizes ranging from 4 to 12 nm. Moreover, generation of complementary pores between the two chiral channels in the gyroid Iad structure can be controlled systematically depending on synthesis conditions. Carbon replicas, using sucrose as the carbon precursor, are obtained with either the same Iad structure or I4(1)/a (or lower symmetry), depending on the controlled synthesis conditions for silica. Thus, the present discovery of the extended phase domain leads to facile synthesis of the cubic Iad silica with precise structure control, offering vast prospects for future applications of large-pore silica materials with three-dimensional pore interconnectivity.