Optimization of the phase system in the analysis of polynuclear aromatics (PNA) from diesel engine exhaust by high performance liquid chromatography (HPLC)

Summary Polynuclear aromatics (PNA) were collected and enriched from diesel engine exhausts by means of a probe and an absorber system. Group separation of PNA from other constituents of exhaust was accomplished through elution with n-heptane on a silica column. A variety of phase systems ranging from unpolar to strong polar packings and eluents, respectively, were tested to resolve PNA into single species. Of these a n-octadecyl bonded silica packing and methanol/water was found to be the most optimal with regard to resolution for real PNA mixtures. Separation was completed within 2–3 h at isocratic conditions.Paper presented at Euroanalysis III, Dublin. August 20–25, 1978.     

GC investigation of olefins with chemically bonded gamma-mercaptopropylsilane-copper(II) complexes

Summary A column packing containing thiol groups chemically bonded to the silica surface was synthesized. The thiol functional groups were used as ligands capable of forming stable complexes with Cu(II). The prepared material was characterized by gas chromatography using unsaturated linear and branched hydrocarbons as well as cyclic and aromatic hydrocarbons. The occurrence of specific metal—olefin interactions resulting from the formation of -complexes during the chromatographic process was observed.Part IV of a series on transition metal complexes in GC. Part III see ref. [1].     

Monodentate substitution reactions of [MO2(CN)4]n− type complexes: The crystal structure of the sodium thiocyanate adduct of tetramethylammonium tetracyanooxothiocyanatotungstate(IV)

The crystal structure of (Me₄N)₃[WO(CN)₄(NCS)]·NaNCS was determined from three-dimensional x-ray diffraction data. The dark blue crystals are monoclinic, space group C2/m, with cell dimensions a=13.105(4), b=12.688(2), c=18.871(3) Å, =100.4(8)°, z=4 and D=1.46 g cm^–3. Anisotropic refinement of 1333 observed reflections converged to R=0.068. The [WO(CN)₄(NCS)]^3– ion is a distorted octahedron with the tungsten atom displaced by 0.35 Å out of the plane formed by the four cyano ligands, towards the oxo ligand. The coordinated thiocyanate ligand is bonded to the tungsten atomvia the nitrogen atomtrans to the oxo ligand. Bond distances found: W–CN_av=2.14(3), W–O=1.61(2) and W–NCS=2.23(2) Å. The compound crystallizes as an adduct with an additional thiocyanate anion, ionically bonded to a severely disordered sodium cation. The results correlate with available data from similar complexes.     

Characterization of Amino-, Cyano-alkyl Bonded Silica Columns in Normal-Phase Liquid Chromatography by Using Steroids

Abstract

In order to characterize the chemically bonded phases in HPLC analysis, the retention behavior of fifteen steroids including estrogen, androgen, progestogen and corticoid were systematically examined using dioxan as the stronger component in an n-hexane-binary system. A linear relationship between the logarithm of the capacity ratio and logarithm of the molar concentration of the binary solvent was confirmed for amino- and cyano-type bonded as well as non-bonded silica gel columns. Based on the retention indices of these phases, the retentivity of the packing materials was determined as follows: the amino-type is similar to and the cyano-type is weaker (0.7 times) than bare silica gel when using dioxan as the stronger component. The specific retentivity of an amino column for polar steroids containing phenolic and alcoholic hydroxyl groups suggests a molecular interaction associated with hydrogen bonding between the polar packing surface and solute compounds. The selectivity of amino packing was found to be larger than cyano packing whose retention selectivity is similar to a bare silica gel.     

Synthesis of chemically bonded squalene(ane) phases for microcolumn gas chromatographic separation of low-molecular-weight hydrocarbons in extraterrestrial atmospheres

Summary Chemically bonded squalene(ene) phases have been synthesized via a hydride modified silanization process using dimethylchlorosilane, triethoxysilane and trichlorosilane. The surface structure of the bonded phases were characterized with DRIFT and solid state NMR studies. The results of the latter indicate successful bonding of a non-terminal olefin to the silica surface and that bonding of individual squalene molecules appeared not to occur at the same site(s) presumably due to steric hindrance. Among the phases examined, the trichlorosilane-based material exhibits better chromatographic properties probably due to greater surface coverage and hence effective non-polar interaction between the solutes and the bonded ligands. Under isothermal conditions, the present packings produced fast and efficient separation of C₁–C₄ saturated hydrocarbons on shorter columns than similar columns containing alkyl- or bidentate alkyl-modified silica packings at low column head pressure and are thermally stable at temperatures up to 250°C or higher.     

A novel three-dimensional mixed bridging–ligand complex with an unexpected 1,3-diaminopropane bridge

Reaction of K₃[Fe(CN)₆] with [Cu(tn)₂](ClO₄)₂ (tn=1,3-diaminopropane) leads to a novel mixed cyano and tn bridged three-dimensional (3D) bimetallic assembly (1), in which each [Fe(CN)₆]⁴⁻ anion connects six copper(II) cations via six CN⁻ groups, whereas each copper(II) cation is linked to three [Fe(CN)₆]⁴⁻ ions and two other copper(II) ions through Cu–NC–Fe and Cu–tn–Cu linkages, respectively. Magnetic studies reveal weak antiferromagnetic interactions between the nearest Cu^II (S=1/2) ions through the diamagnetic [Fe(CN)₆]⁴⁻ anion.     

C-N stretching force constants in cyano complexes

Summary The study of CN bonding in cyano complexes from vibrational spectra can be carried out using a simplified model, the Cotton-Kraihanzel Force Field, giving results in good accord with those obtained by means of more rigorous and complex entangled calculations. Application of the model is also made to mixed cyano complexes for which rigorous force constants are not known, and a good predictive ability is found, particularly for [Pt(CN)₅X]^2– compounds.     

Low-dimensional compounds containing cyano groups. III: a structural,spectral and thermal study of dicyanoargentates containing 4-methylpyridine

The complexes Cu^II(4-Mepy)₂Ag₂(CN)₄ (1) and Cu^II(4-Mepy)₃Ag_2–x Cu^I _x (CN)₄ (2) (4-Mepy = 4-methylpyridine, x = 0.07) were isolated from a reaction mixture containing 4-Mepy, K[Ag(CN)₂] and CuSO₄. I.r. spectra indicated the presence of both monodentate and bridging cyano groups in (1) and (2), confirmed by their known structures, both consisting of neutral zigzag chains. Two neighbouring chains in (2) are linked by argentophilic interactions between Ag atoms of bridging dicyanoargentate anions, whose positions are partly occupied by Cu^I ions to the extent of 7 at.%, with an unusually short Ag...Ag distance of 2.9264(5) Å, to form a ladder. Individual ladders are tied together as sheets by weaker argentophilic interactions between silver atoms of interdigitated monodentate dicyanoargentate anions of two different ladders. Thermal decomposition of (2) occurs in two separated stages. In the first stage, three 4-Mepy molecules are liberated from the formula unit and, in the second stage, redox decomposition of the cyano groups occurs. The thermal decomposition of (1) is more complicated as the release of two 4-Mepy molecules is overlapped by decomposition of one cyano group followed by further redox decomposition of the remaining cyano groups.     

New Layered Polymer [{Mn(H2O)3}2{Re6Se8(CN)6}] · 3.3H2O: Synthesis and Properties

The [{Mn(H₂O)₃}₂{Re₆Se₈(CN)₆}] · 3.3H₂O complex was produced on slow evaporation of an aqueous solution containing the salt of a cluster complex K₄Re₆Se₈(CN)₆ · 3.5H₂O and a 23-fold excess of Mn²⁺. The cluster complexes [Re₆Se₈(CN)₆]^4– are linked in a crystal into the charged coordination layers [{Mn(H₂O)₃}₄{Re₆Se₈(CN)₆}₃]^4– ₂ through the Mn²⁺ cations. The Mn²⁺ cations are coordinated in a layer by three cyano nitrogen atoms of the cluster complexes; the Mn–N bond lengths are 2.13(4) and 2.21(2) Å. Each [Re₆Se₈(CN)₆]^4– anion is bonded to three manganese cations Mn(1). The anions are bonded additionally to the Mn(2) cations disordered over two close positions.     

Structure–reactivity relationships of alkyl α‐hydroxymethacrylate derivatives

A series of alkyl α‐hydroxymethacrylate derivatives with various secondary functionalities (ether, ester, carbonate, and carbamate) and terminal groups (alkyl, cyano, oxetane, cyclic carbonate, phenyl and morpholine) were synthesized to investigate the effect of intermolecular interactions, H‐bonding, π–π interactions, and dipole moment on monomer reactivity. All of the monomers except one ester and one ether derivative are novel. The polymerization rates, determined by using photo‐DSC, showed the average trend (aromatic carbamate > hydroxyl > ester > carbonate ～ aliphatic carbamate ～ ether), with several exceptions due to the differences in terminal groups. There is a correlation between the chemical shift differences of the double bond carbons, the calculated dipole moments, and the reactivities only for nonhydrogen bonded monomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Crystal structures of four δ‐keto esters and a Cambridge Structural Database analysis of cyano–halogen interactions

The revived interest in halogen bonding as a tool in pharmaceutical cocrystals and drug design has indicated that cyano–halogen interactions could play an important role. The crystal structures of four closely related δ‐keto esters, which differ only in the substitution at a single C atom (by H, OMe, Cl and Br), are compared, namely ethyl 2‐cyano‐5‐oxo‐5‐phenyl‐3‐(piperidin‐1‐yl)pent‐2‐enoate, C₁₉H₂₂N₂O₃, (1), ethyl 2‐cyano‐5‐(4‐methoxyphenyl)‐5‐oxo‐3‐(piperidin‐1‐yl)pent‐2‐enoate, C₂₀H₂₄N₂O₄, (2), ethyl 5‐(4‐chlorophenyl)‐2‐cyano‐5‐oxo‐3‐(piperidin‐1‐yl)pent‐2‐enoate, C₁₉H₂₁ClN₂O₃, (3), and the previously published ethyl 5‐(4‐bromophenyl)‐2‐cyano‐5‐oxo‐3‐(piperidin‐1‐yl)pent‐2‐enoate, C₁₉H₂₁BrN₂O₃, (4) [Maurya, Vasudev & Gupta (2013). RSC Adv. 3 , 12955–12962]. The molecular conformations are very similar, while there are differences in the molecular assemblies. Intermolecular C—H...O hydrogen bonds are found to be the primary interactions in the crystal packing and are present in all four structures. The halogenated derivatives have additional aromatic–aromatic interactions and cyano–halogen interactions, further stabilizing the molecular packing. A database analysis of cyano–halogen interactions using the Cambridge Structural Database [CSD; Groom & Allen (2014). Angew. Chem. Int. Ed. 53 , 662–671] revealed that about 13% of the organic molecular crystals containing both cyano and halogen groups have cyano–halogen interactions in their packing. Three geometric parameters for the C—X...N[triple‐bond]C interaction (X = F, Cl, Br or I), viz. the N...X distance and the C—X...N and C—N...X angles, were analysed. The results indicate that all the short cyano–halogen contacts in the CSD can be classified as halogen bonds, which are directional noncovalent interactions.     

HPLC Study of the Kinetics of Intramolecular Cyclization of Two New Phenyldiazene Molecules. Analytical Properties of the Resulting Liquid Crystals

A group of zeolites and a 3D nanoporous metal-organic material RPM-1 were tested as column packings for adsorption of isotactic polypropylene and linear polyethylene from dilute solutions. It was found that polyethylene is fully or partially retained from thermodynamically good solvents (1,1,2,2-tetrachloroethylene, 1,4-dimethylbenzene, diphenylether, 1,2-dichlorobenzene and 1,3-dichlorobenzene) at temperatures of 115 °C or 140 °C, when a specific type of zeolite with pore sizes 5–6 Å has been used as the column packing. Polypropylene was fully retained in another type of zeolite with pores of 7–12 Å, when diphenylether was used as the mobile phase. As far as known, this is the first system sorbent - mobile phase, where adsorption of polypropylene was observed.     

Selectivity in reversed-phase separations Influence of the stationary phase

The selectivity difference between 15 different stationary phases was measured using a large number of analytes at 2 or 3 different pH values (3, 7 and 10) with acetonitrile and methanol as the mobile phase modifiers. The packings discussed include standard C(8) and C(18) packings, packings with embedded polar groups, a phenyl packing, a pentafluoro-phenyl packing, an adamantylethyl packing and others. The major selectivity differences observed are discussed in detail. Specific effects such as pi-pi interactions on phenyl packings or hydrogen-bond interactions on phases with embedded polar groups are confirmed.     

Retention and selectivity effects caused by bonding of a polar urea-type ligand to silica: a study on mixed-mode retention mechanisms and the pivotal role of solute-silanol interactions in the hydrophilic interaction chromatography elution mode

The separation properties of five silica packings bonded with 1-[3-(trimethoxysilyl)propyl]urea in the range of 0–3.67 μmol m⁻² were investigated in the hydrophilic interaction chromatography (HILIC) elution mode. An increase of the ligand surface density promoted retention of non-charged polar compounds and even more so for acids. An opposite trend was observed for bases, while the amphoteric compound tyrosine exhibited a U-shaped response profile. An overall partitioning retention mechanism was incompatible with these observations; rather, the substantial involvement of adsorptive interactions was implicated. Support for the latter was provided by column-specific changes in analyte retention and concomitant selectivity effects due to variations of salt concentration, type of salt, pH value, organic modifier content, and column temperature. Silica was more selective for separating compounds differing in charge state (e.g. tyramine vs. 4-hydroxybenzoic acid), while in cases where structural differences of solutes resided in non-charged polar groups (e.g. tyramine vs. 5-hydroxydopamine, nucleoside vs. nucleobase) more selective separations were obtained on bonded phases. Hierarchical cluster analysis of the home-made urea-type and three commercial amide-type bonded packings evinced considerable differences in separation properties. The present data emphasise that the role of the packing material under HILIC elution conditions is hardly just the polar support for a dynamic coating with a water-enriched layer. Three major retention mechanisms are claimed to be relevant on bare silica and the urea-type bonded packings: (i) HILIC-type partitioning, (ii) HILIC-type weak adsorption such as hydrogen bonding between solutes and ligands or solutes and silanols (potentially influenced by individual degrees of solvation, salt bridging, etc.), (iii) strong electrostatic (ionic) solute–silanol interactions (attractive/repulsive). Even when non-charged polar bonded phases are used, solute–silanol interactions should not be discounted, which makes them a prime parameter to be characterised by HILIC column tests. Multi/mixed-mode type separations seem to be common under HILIC elution conditions, associated with a great deal of selectivity increments. They are accessible and controllable by a careful choice of the type of packing, the mobile phase composition, and the temperature.     

Comparative studies of gas chromatographic properties of new packings with chemically bonded complexes

Specific interactions of aliphatic linear and branched hydrocarbons as well as cyclic and aromatic hydrocarbons with new packings containing chemically bonded complexes of transition metals are studied. The possibility of using these packings to separate these compounds is also discussed. The packings under study contain complexes of Cu(II) and Cr(III) chemically bonded to the silica surface. Chlorides of these metals are bonded to the silica surface by the use of the ketoimine group originally from 2-(3-triethoxysililpropylimino)-3-(n-buthyl)-pentanon-4. In order to determine an influence of the performed modification to gas chromatographic properties of the packings, such retention parameters as retention factor, retention index, molecular retention index, and specific retention volume are measured for these compounds. Based on the obtained values, a trial is taken to determine an influence of the nature of the bonded metal from the complex on the retention of the adsorbates under study and a dependence between a structure of an adsorbate molecule and values of charge-transfer interactions with the bonded metal complexes.     

Organosilicon and organophosphorus compounds with pseudohalide groups. 2. Reactions of alkoxydimethylsilyl cyanides with chlorides of tricoordinated phosphorus

Reactions of alkoxydimethylsilyl cyanides with some chlorides of tricoordinated phosphorus (phosphorous chlorides) have been studied. It is shown that, depending on the nature of the phosphorous chloride, the chlorine atoms can either be substituted only for cyano groups, or for alkoxy and cyano groups simultaneously. The results obtained in this work clearly show that alkoxydimethylsilyl cyanides are more reactive reagents for attaching cyano groups to a phosphorus atom than trimethylsilyl cyanide.For Part 1, see [1].For a preliminary communication, see [2].Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 12, pp. 2847–2849, December, 1991.     

A novel type of optically active helical liquid crystalline polymers: Synthesis and characterization of poly(p‐phenylene)s containing terphenyl mesogen with different terminal groups

Series of poly(p‐phenylene)s (PPPs) containing terphenyl mesogenic pendants with cyano and methoxy terminal groups by flexible ? COO(CH₂)₆O? bridge [ P(CN) and P(OCH₃) ] are synthesized through Yamamoto polycondensation with Ni‐based complex catalysts. The effects of the structural variation on their properties, especially their mesomorphism, ultraviolet–visible (UV), and photoluminescence behaviors, are studied. All of the polymers are stable, losing little of their weights when heated to ≥340 °C. The polymers show good solubility and can be dissolved in common solvents. P(CN) with cyano terminal group shows enantiotropic SmA_d phase with bilayer packing arrangement, while P(OCH₃) with methoxy terminal group readily forms nematic and SmA_d phase when heated and cooled. Photoexcitation of their solutions induces strong blue light emission. Compared with P(OCH₃) , the light‐emitting bands of polymer P(CN) is slightly redshifted to 428 nm and the emission intensity of P(CN) is much stronger, due to the existence of donor–acceptor pairs. More interestingly, both of the polymers exhibit obvious Cotton effect on the CD spectra, resulting from the predominant screw sense of the backbone. This indicates that the bulky mesogenic pendant orientating around the backbone will force the main chain with helical conformation in the long region due to steric crowdedness. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4723–4735, 2009     

Solute retention in reversed-phase chromatography as a function of stationary phase properties: Effect of n-alkyl chain length and ligand density

Summary Two series of bonded phases were synthesized employing LiChrospher Si 100, 10 m and n-alkyldimethylmonochlorosilanes as silanizing reagents. In series A the n-alkyl chain length, n, of the bonded phase was varied between 1 and 20 at a constant ligand density of 3.5±0.2mol·m^–2. In series B the ligand density, d, was gradually changed from 0 to 4.1mol·m^–2 on the C₁, C₄, C₆, C₈ and C₁₈ bonded phases, respectively.The capacity factors of benzoic acid esters and anilines as solutes were found to increase linearly with the n-alkyl chain length of packings at constant eluent composition (series A) up to a so-called critical chain length, n_crit, where the capacity factor remained constant. n_crit was in the range from 11 to 14. The same pattern was observed when plotting the solute capacity factor against the ligand density of the packing at constant n and constant eluent composition (series B). The critical ligand density, _crit, varied between 2.3 and 3.2 mol·m^–2 depending on n and the solute. Furthermore, solute retention was slightly higher on RP packings with an even number of carbon atoms in the alkyl chain than on those with an odd number.These findings are consistent with the results of Berendsen and de Galan (J. Chromatogr., 196, 21 (1980)), Dill (J. Phys. Chem., 91, 1980 (1987)) and Simpson and Lau (to be published). The observed phenomena reflect the dynamic structure of RP silicas which are related to the mobility of solvated n-alkyl chains. Due to the lack of a precise conformational analysis of the surface of RP silicas, a semiquantitative model was applied to interprete the described dependencies.     

Investigation of the interaction of olefin-bonded transition metal complexes by gas chromatography. II. Phosphine complexes of Cu(II)

Summary Packings consisting of chemically bonded diphenylphosphine complexes with CuCl₂ and CuBr₂ were synthesized and their retention parameters determined. The packings investigated are capable of specific interactions with electron-donating compounds and are characterized by particularly high selectivity in relation to cis and trans isomers allowing their complete separation.Part 1: see ref. [1]     

Ketoimino groups as silica surface modifiers

The presented work is devoted to Porasil C silica, with organic compounds bonded to its surface and capable of electron-donor-acceptor (EDA) interactions. These packings are a good base for studying interactions among stationary phases and the adsorbate molecules showing electron-donor properties. The presented work concentrates on the phases containing ketoimino groups at their surface. Copper and chromium chlorides were bonded through these to the surface. Physicochemical characteristics of the obtained packings were determined by the use of elemental analysis, differential scanning calorimetry (DSC) and inverse gas chromatography. We examined the influence of the surface modification on the retention parameters of the nucleophilic compounds.