Influence of adhesive layer properties on laser-generated ultrasonic waves in thin bonded plates

This paper studies quantitatively the generation of Lamb waves in thin bonded plates subjected to laser illumination, after considering the viscoelasticity of the adhesive layer. The displacements of such plates have been calculated in the frequency domain by using the finite element method, and the time domain response has been reconstructed by applying an inverse fast Fourier transform. Numerical results are presented showing the normal surface displacement for several configurations: a single aluminum plate, a three-layer bonded plate, and a two-layer plate. The characteristics of the laser-generated Lamb waves for each particular case have been investigated. In addition, the sensitivity of the transient responses to variations of material properties (elastic modulus, viscoelastic modulus, and thickness) of the adhesive layer has been studied in detail.     

金属板疲劳损伤非线性兰姆波混频检测

针对金属板结构安全运行需要,开展了金属板结构疲劳损伤非线性兰姆波混频检测方法研究.通过数值仿真,研究了两列A0兰姆波与材料损伤间的非线性相互作用.结果 表明,两列共线A0兰姆波在结构材料损伤处产生单向传播的和频S0波,且和频波幅值随传播距离具有积累增长效应.对不同疲劳程度金属板试件进行了共线混频兰姆波检测实验,结果表明...     

Study on laser-generated Lamb waves propagation in viscoelastic and anisotropic plate

The propagation characteristics of laser-generated Lamb waves in thin composite plates are theoretically studied. Taking the anisotropic and viscoelastic properties of the composite material into account, the finite element models for simulating laser-generated Lamb waves in the composite material are established in the frequency domain. Numerical results are calculated in purely elastic and viscoelastic transversely isotropic plates, respectively. The effects of the anisotropic and viscoelastic properties on the propagation of Lamb waves are analyzed in detail. The numerical results exhibit that the features of the laser-generated Lamb wave, including attenuation, velocity, frequency, and the dispersive nature, have a close relationship with the anisotropic and viscoelastic properties of the material.     

多通道超声兰姆波检测板状结构中的裂纹

超声兰姆(Lamb)波在结构缺陷检测方面愈来愈受到重视,但目前Lamb波的应用局限于单信号源激励,单通道接收的方法,容易受到噪声干扰,其后续的信号分析处理也比较复杂。本文旨在采用多通道Lamb波对板状结构中的裂纹进行定量分析与诊断。在铝板的表面凿刻出不同深度的凹槽作为裂纹,通过线阵换能器采集在一定传播距离内的多通道Lamb波信号,并采用二维傅里叶变换分析在不同深度的裂纹下,Lamb波模式能量的变化规律。结果表明,相对于完好铝板中的Lamb波信号,裂纹的存在会使Lamb波发生模式转换现象,并且转换模式能量百分比随裂纹深度的增加而线性增加。其结果为Lamb波评价板状结构中的裂纹状况提供了一种可能的方法。     

复合兰姆波声子晶体中超宽部分禁带

兰姆波在声子晶体薄板中的传播特性因其在无损检测、 减振技术和传感器件等领域的潜在应用价值而受到越来越多的关注. 本文采用超原胞平面波展开法和有限元法系统地研究了复合对称结构声子晶体薄板中的兰姆波超宽部分禁带. 结果表明: 对于在薄板侧面对称地嵌入双层矩形空气柱构成的复杂系统, 低阶兰姆波部分带隙结构极为丰富. 将晶格常数(L)和板厚(H) 比值具有匹配关系的兰姆波声子晶体衔接构成复合结构, 低阶兰姆波部分禁带宽度因各组分结构的部分禁带交叠而得到显著拓宽, 可在低频超宽频带内实现对特定低阶兰姆波模式良好的模式选择功能. 该研究结果对兰姆波缺陷无损检测中模式优化选择及兰姆波单向导通器件设计等方面具有重要意义.     

The propagation of coupled Lamb waves in multilayered arbitrary anisotropic composite laminates

Based on linear three-dimensional elasticity theory, the wave equations of coupled Lamb waves in multilayered arbitrary anisotropic composite laminates are derived using a Legendre orthogonal polynomial approach. The elastodynamic solution for the propagation of coupled Lamb waves in composite plates is also presented to determine the characteristics of coupled Lamb waves. To verify the applicability and validity of the method, two cases of bi-layered plates formed with isotropic components and anisotropic components, respectively, are primarily manipulated for comparison with earlier known results. Next, the dispersion curves, displacements and stress distributions of Lamb waves in multilayered anisotropic laminates are calculated. The effects of coupling and fiber orientation on the characteristics of the Lamb waves are illustrated. The potential usefulness of the fundamental modes of the coupled Lamb waves is discussed in detail.     

The propagation of Lamb waves in a plate bordered with layers of a liquid.

The influence of liquid layers on the propagation of Lamb waves in a plate of finite thickness is studied theoretically. The dispersion equations of Lamb waves in a plate bordered with layers of liquids are derived. Numerical solutions of the equations show that the phase velocity of Lamb waves changes with the thickness of the liquid layers. For the lowest antisymmetrical mode of very thin plates, the numerical results calculated from the dispersion equations are compared with those derived from the bending wave acoustic impedance approach. The limitation of the latter is discussed. Applications of Lamb waves pertinent to biosensing are also presented.     

Combined spectral estimator for phase velocities of multimode Lamb waves in multilayer plates

A novel combined spectral estimate (CSE) method for differentiation and estimation the phase velocities of multimode Lamb waves whose wave numbers are much close or overlap one another in multiplayer plates is presented in this paper, which based on auto-regressive (AR) model and 2-D FFT. Simulated signals in brass plate were processed by 2-D FFT and CSE. And experiments are performed by using two conventional angle probes as emitter and receiver on the same surface of three-layered aluminum/xpoxy/aluminum plates, which include symmetrical and unsymmetrical plates. The multimode Lamb waves are excited in these laminates, and the received signal is processed by 2-D FFT and CSE, respectively. The results showed that the phase velocities of multimode signals whose wave numbers are much closed cannot be differentiated by 2-D FFT, but CSE has strong spatial resolution. Compared the measured phase velocities with the theoretical values, the error is smaller than 2% on the whole. It promises to be a useful method in experimental signals processing of multimode Lamb waves.     

振动声调制技术下微裂纹的非线性响应分析

采用非线性弹簧模型对振动声调制技术下微裂纹产生的非线性调制效应进行解释。从理论上分析了振动声调制技术下微裂纹产生非线性调制现象的原理,将微裂纹的开合状态等效为非线性弹簧。利用有限元软件构建并仿真微裂纹非线性弹簧模型,分别观察不同激励下裂纹界面的开合状态及混合声波的传播特性。结果表明,微裂纹界面随低频声波呈周期性开合,使得通过裂纹界面的高频声波与低频声波相互调制而产生非线性现象。在以上研究基础上,开展振动声调制实验研究。对比仿真结果,非线性调制系数R在实验条件下和仿真随低频激励幅值的变化趋势相同,证明了该模型的正确性。该模型为振动声调制技术应用于微裂纹的超声非线性检测提供了理论依据。      

Time-frequency analysis of the dispersion of Lamb modes.

Accurate knowledge of the velocity dispersion of Lamb modes is important for ultrasonic nondestructive evaluation methods used in detecting and locating flaws in thin plates and in determining their elastic stiffness coefficients. Lamb mode dispersion is also important in the acoustic emission technique for accurately triangulating the location of emissions in thin plates. In this research, the ability to characterize Lamb mode dispersion through a time-frequency analysis (the pseudo-Wigner-Ville distribution) was demonstrated. A major advantage of time-frequency methods is the ability to analyze acoustic signals containing multiple propagation modes, which overlap and superimpose in the time domain signal. By combining time-frequency analysis with a broadband acoustic excitation source, the dispersion of multiple Lamb modes over a wide frequency range can be determined from as little as a single measurement. In addition, the technique provides a direct measurement of the group velocity dispersion. The technique was first demonstrated in the analysis of a simulated waveform in an aluminum plate in which the Lamb mode dispersion was well known. Portions of the dispersion curves of the A0, A1, S0, and S2 Lamb modes were obtained from this one waveform. The technique was also applied for the analysis of experimental waveforms from a unidirectional graphite/epoxy composite plate. Measurements were made both along and perpendicular to the fiber direction. In this case, the signals contained only the lowest order symmetric and antisymmetric modes. A least squares fit of the results from several source to detector distances was used. Theoretical dispersion curves were calculated and are shown to be in good agreement with experimental results.     

不锈钢折弯板裂纹Lamb波检测技术*

金属弯板广泛应用于车辆、船舶、飞机等大型装备结构件中，折弯处易形成应力集中产生裂纹，直接影响构件的使用安全和寿命。本文开展了不锈钢弯板裂纹缺陷Lamb波检测技术研究，计算了钢板的频散曲线，优选三种不同频率的S0模态：0.25MHz、0.5MHz、1MHz。利用COMSOL软件建立频域仿真模型，模拟了Lamb波在3mm厚“L”形弯板内部的传播情况，开展折弯板裂纹缺陷检测实验，并使用小波包变换的方法对实验信号进行分析。结果表明，经小波变换后，0.25MHz、0.5MHz、1 MHz的S0模态Lamb波均可用于裂纹缺陷的识别检测.     

Scattering of the fundamental anti-symmetric Lamb wave at delaminations in composite laminates

An analysis of the scattering characteristics of the fundamental anti-symmetric (A(0)) Lamb wave at a delamination in a quasi-isotropic composite laminate is presented. Analytical solutions for this problem do not exist due to the anisotropic nature and multilayer characteristics of composite laminates. This study uses a three-dimensional finite element (FE) method and experimental measurements to provide physical insight into the scattering phenomena. Good agreement is found between simulations and experimental measurements. The results show that the A(0) Lamb wave scattering at a delamination in composite laminates is much more complicated than the scattering at a defect in isotropic plates. Scatter amplitudes and scatter directivity distributions depend on the delamination size to wavelength ratio and the through-thickness location of the delamination damage. The study also investigates the feasibility of the common experimental practice of simulating delamination damage by bonding masses to the surface of composite laminates for guided wave damage detection and characterization methodologies verifications. The results suggest that care is required to use bonded masses to simulate delamination damage for verifying and optimizing damage characterization techniques. In summary, the results of the investigation help to further advance the use of the A(0) Lamb wave for damage detection and characterization.     

Normal mode expansion method for laser-generated ultrasonic Lamb waves in orthotropic thin plates

A quantitative theory for modeling the laser-generated transient ultrasonic Lamb waves, which propagates along arbitrary directions in orthotropic plates, is presented by employing an expansion method of generalized Lamb wave modes. The displacement field is expressed by a summation of the symmetric and antisymmetric modes in the surface stress-free orthotropic plate, and therefore the theory is particularly appropriate for waveform analyses of Lamb waves in thin plates because one needs only to evaluate several lower modes. The transient waveforms excited by the thermoelastic expansion and the oil-coating evaporation are analyzed for a transversely isotropic thin plate. The results show that the theory provides a quantitative analysis to characterize anisotropic elastic stiffness properties of orthotropic plates by laser-generated Lamb wave detection.     

基于模式分离的兰姆波逆时偏移成像

应用频率域逆时偏移方法实现各向同性和各向异性板中缺陷的兰姆波成像.由于缺陷引起的多模态散射信号会在重建图像中形成伪像,根据基本导波模式振动对称性的差别进行了模式分离预处理.基于多元阵列超声技术,开展了铝板和复合板内缺陷频率域逆时偏移超声成像方法的数值仿真研究.首先,建立有限元模型,采用环形传感器数值采集由缺陷引起的兰姆波散射信号,然后,将采集到的多模式散射信号进行模式分离处理,再将模式分离后的兰姆波散射信号经时间反转后并在相应的接收器处重新激励,在频域中运用格林函数反向传播兰姆波散射信号,获取监测区域的声场信息,与正向传播声场进行互相关,重建缺陷图像.首先对铝板中单缺陷以及复合材料板中相邻的两个相同缺陷进行数值仿真,对比有无模式分离处理的缺陷逆时偏移成像效果,体现出模式分离的重要性.在此基础上,采用逆时偏移方法对复合板材内位置邻近、深度不同的双缺陷进行识别.数值结果表明,模式分离预处理后的缺陷重建图像能够有效去除多模式干扰产生的伪像.文中提出的成像方法对各向同性板和各向异性板内缺陷的检测和成像具有很好的发展潜力,可以准确地探测多个缺陷的形状、尺寸和深度.     

Nonlinear lamb waves in a metal plate with defects

Experimental results on the propagation of finite-amplitude Lamb waves in a solid plate made of polycrystalline aluminum alloy with defects are presented. The Lamb waves are recorded and visualized using a scanning laser vibrometer. The dependences of the higher harmonic amplitudes, both averaged over the plate surface and measured at a point far from the defect and at the site of the defect, on the fundamental frequency amplitude are studied. A threshold character of the higher harmonic generation and a power-law behavior of their amplitudes are revealed, the latter feature being unconventional for the nonlinearity associated with the anharmonicity of the crystal lattice of the material. The possibility of locating the distribution of individual defects from the measured spatial distribution of structural nonlinearity in the material under study is experimentally demonstrated. The results of the experiments are explained in terms of the bilinear medium model.     

Modal decomposition method for modeling the interaction of Lamb waves with cracks

The interaction of the low-order antisymmetric (a0) and symmetric (s0) Lamb waves with vertical cracks in aluminum plates is studied. Two types of slots are considered: (a) internal crack symmetrical with respect to the middle plane of the plate and (b) opening crack. The modal decomposition method is used to predict the reflection and transmission coefficients and also the through-thickness displacement fields on both sides of slots of various heights. The model assumes strip plates and cracks, thus considering two-dimensional plane strain conditions. However, mode conversion (a0 into s0 and vice versa) that occurs for single opening cracks is considered. The energy balance is always calculated from the reflection and transmission coefficients, in order to check the validity of the results. These coefficients together with the through-thickness displacement fields are also compared to those predicted using a finite element code widely used in the past for modeling Lamb mode diffraction problems. Experiments are also made for measuring the reflection and transmission coefficients for incident a0 or s0 lamb modes on opening cracks, and compared to the numerical predictions.     

Microcrack localization using a collinear Lamb wave frequency-mixing technique in a thin plate

A novel Lamb wave frequency-mixing technique is proposed for locating microcracks in a thin plate,which does not require the resonance condition of Lamb wave mixing and can accurately locate the microcracks through only one-time sensing.Based on the bilinear stress-strain constitutive model,a two-dimensional finite element(FE)model is built to investigate the frequency-mixing response induced by the interaction between two primary Lamb waves and a microcrack.When two primary Lamb waves of A0 and S0 modes with different frequencies excited on the same side of the plate simultaneously impinge on the examined microcrack,under the modulation of the contact acoustic nonlinearity,the microcrack itself can be deemed as the secondary sound source and it will radiate the Lamb waves of new combined frequencies.Based on the time of flight of the generated A0 mode at difference frequency,an indicator named normalized amplitude index(NAI)is defined to directly locate the multi-microcracks in the given plate.It is found that the number and location of the microcracks can be intuitively visualized by using the NAI based frequency-mixing technique.It is also demonstrated that the proposed frequency mixing technique is a promising approach for the microcrack localization.     

Influence of stacking sequence on scattering characteristics of the fundamental anti-symmetric Lamb wave at through holes in composite laminates

This paper investigates the scattering characteristics of the fundamental anti-symmetric (A(0)) Lamb wave at through holes in composite laminates. Three-dimensional (3D) finite element (FE) simulations and experimental measurements are used to study the physical phenomenon. Unidirectional, bidirectional, and quasi-isotropic composite laminates are considered in the study. The influence of different hole diameter to wavelength aspect ratios and different stacking sequences on wave scattering characteristics are investigated. The results show that amplitudes and directivity distribution of the scattered Lamb wave depend on these parameters. In the case of quasi-isotropic composite laminates, the scattering directivity patterns are dominated by the fiber orientation of the outer layers and are quite different for composite laminates with the same number of laminae but different stacking sequence. The study provides improved physical insight into the scattering phenomena at through holes in composite laminates, which is essential to develop, validate, and optimize guided wave damage detection and characterization techniques.     

非线性兰姆波在阶梯板中传播的有限元仿真

在非线性兰姆波检测中,累积二次谐波是重要的检测信号.该文利用有限元法仿真了非线性兰姆波在阶梯板中的产生和传播过程,通过二维离散傅里叶变换分析了兰姆波的传播模态和各个模态通过波导横截面的能流大小,给出了各个模态在阶梯板中的反射、透射系数,总结了其随阶梯板厚度的变化规律.研究发现,随着台阶增高,散射效应使得兰姆波更难入射波...     

Feasibility of bone assessment with leaky Lamb waves in bone phantoms and a bovine tibia

In this study, the effect of cortical thickness variation on the propagation of leaky Lamb waves is investigated by using an axial transmission technique commonly used to characterize long bones. Three Lucite plates with thicknesses of 1, 3, and 5 mm as bone phantoms and one bovine tibia with a cortical thickness of 2 mm were used at various low frequencies. Experimental measurements in bone phantoms show that the peak frequency and amplitude of excited Lamb modes strongly depend on the thickness of the Lucite plate. In the bovine tibia, the S0 and A0 Lamb modes are consistently observed in the frequency-thickness region from 0.2 to 1.0 MHz mm, and can be effectively launched at a frequency of 200 kHz, suggesting 200 kHz to be the optimal signal frequency for in vivo clinical applications. It can be also seen that both modes are affected by the frequency-thickness product, but the effect is greater for the A0 mode. Hence, the A0 Lamb mode seems more sensitive to cortical thickness change due to aging and osteoporosis. This study suggests that the use of leaky Lamb waves is feasible for ultrasonic bone assessment.