Trapezoid mesa trench metal-oxide semiconductor barrier Schottky rectifier: an improved Schottky rectifier with better reverse characteristics

An improved structure of Schottky rectifier,called a trapezoid mesa trench metal-oxide semiconductor (MOS) barrier Schottky rectifier (TM-TMBS),is proposed and studied by two-dimensional numerical simulations.Both forward and especially better reverse I-V characteristics,including lower leakage current and higher breakdown voltage,are demonstrated by comparing our proposed TM-TMBS with a regular trench MOS barrier Schottky rectifier (TMBS) as well as a conventional planar Schottky barrier diode rectifier.Optimized device parameters corresponding to the requirement for high breakdown voltage are given.With optimized parameters,TM-TMBS attains a breakdown voltage of 186 V,which is 6.3% larger than that of the optimized TMBS,and a leakage current of 4.3×10 6 A/cm 2,which is 26% smaller than that of the optimized TMBS.The relationship between optimized breakdown voltage and some device parameters is studied.Explanations and design rules are given according to this relationship.     

High-performance 4H-SiC junction barrier Schottky diodes with double resistive termination extensions

4H-SiC junction barrier Schottky (JBS) diodes with a high-temperature annealed resistive termination extension (HARTE) are designed, fabricated and characterized in this work. The differential specific on-state resistance of the device is as low as 3.64 m ·cm2 with a total active area of 2.46×10-3 cm2 . Ti is the Schottky contact metal with a Schottky barrier height of 1.08 V and a low onset voltage of 0.7V. The ideality factor is calculated to be 1.06. Al implantation annealing is performed at 1250℃ in Ar, while good reverse characteristics are achieved. The maximum breakdown voltage is 1000 V with a leakage current of 9×10-5 A on chip level. These experimental results show good consistence with the simulation results and demonstrate that high-performance 4H-SiC JBS diodes can be obtained based on the double HARTE structure.     

On the reverse leakage current of Schottky contacts on free-standing GaN at high reverse biases

In this work, a dislocation-related tunneling leakage current model is developed to explain the temperature-dependent reverse current–voltage(I–V –T) characteristics of a Schottky barrier diode fabricated on free-standing GaN substrate for reverse-bias voltages up to-150 V. The model suggests that the reverse leakage current is dominated by the direct tunneling of electrons from Schottky contact metal into a continuum of states associated with conductive dislocations in GaN epilayer.A reverse leakage current ideality factor, which originates from the scattering effect at metal/GaN interface, is introduced into the model. Good agreement between the experimental data and the simulated I–V curves is obtained.     

High-Voltage AlGaN/GaN-Based Lateral Schottky Barrier Diodes

Lateral Schottky barrier diodes （SBDs） on A1GaN/GaN heterojunctions are fabricated and studied. The characteristics of the fabricated SBDs with different Schottky contact diameters and different Schottky-Ohmic contact spacings are investigated. The breakdown voltage can be increased by either increasing the Schottky-Ohmie con- tact spacing or increasing the Schottky contact diameter. However, the specific on-resistance is increased at the same time. A high breakdown voltage of 1400 V and low reverse leakage current below 20nA are achieved by the device with a Schottky contact diameter of 100 μm and a contact spacing of 40 μm, yielding a high V^2BR/ RoN,sp value of 194 MW.cm^-2.     

Fabrication and characterization of vertical GaN Schottky barrier diodes with boron-implanted termination

The vertical GaN-on-GaN Schottky barrier diode with boron-implanted termination was fabricated and characterized.Compared with the Schottky barrier diode(SBD)without boron-implanted termination,this SBD effectively improved the breakdown voltage from 189 V to 585 V and significantly reduced the reverse leakage current by 10^5 times.In addition,a high Ion/Ioff ratio of ~10^8 was achieved by the boron-implanted technology.We used Technology Computer Aided Design(TCAD)to analyze reasons for the improved performance of the SBD with boron-implanted termination.The improved performance of diodes may be attributed to that B+could confine free carriers to suppress electron field crowding at the edge of the diode,which could improve the breakdown voltage and suppress the reverse leakage current.     

Improvement of Operation Characteristics for MONOS Charge Trapping Flash Memory with SiGe Buried Channel

We propose and investigate a novel metal/SiO_2/Si_3N_4/SiO_2/SiGe charge trapping flash memory structure(named as MONOS), utilizing Si Ge as the buried channel. The fabricated memory device demonstrates excellent programerasable characteristics attributed to the fact that more carriers are generated by the smaller bandgap of Si Ge during program/erase operations. A flat-band voltage shift 2.8 V can be obtained by programming at +11 V for 100 us. Meanwhile, the memory device exhibits a large memory window of ~7.17 V under ±12 V sweeping voltage, and a negligible charge loss of 18% after 104 s' retention. In addition, the leakage current density is lower than 2.52 × 10~(-7) A·cm~(-2) below a gate breakdown voltage of 12.5 V. Investigation of leakage current-voltage indicates that the Schottky emission is the predominant conduction mechanisms for leakage current. These desirable characteristics are ascribed to the higher trap density of the Si_3N_4 charge trapping layer and the better quality of the interface between the SiO_2 tunneling layer and the Si Ge buried channel. Therefore, the application of the Si Ge buried channel is very promising to construct 3 D charge trapping NAND flash devices with improved operation characteristics.     

Comparison of electrical characteristic between AlN/GaN and AlGaN/GaN heterostructure Schottky diodes

Ni/Au Schottky contacts on AlN/GaN and AlGaN/GaN heterostructures are fabricated.Based on the measured current–voltage and capacitance–voltage curves,the electrical characteristics of AlN/GaN Schottky diode,such as Schottky barrier height,turn-on voltage,reverse breakdown voltage,ideal factor,and the current-transport mechanism,are analyzed and then compared with those of an AlGaN/GaN diode by self-consistently solving Schrdinger’s and Poisson’s equations.It is found that the dislocation-governed tunneling is dominant for both AlN/GaN and AlGaN/GaN Schottky diodes.However,more dislocation defects and a thinner barrier layer for AlN/GaN heterostructure results in a larger tunneling probability,and causes a larger leakage current and lower reverse breakdown voltage,even though the Schottky barrier height of AlN/GaN Schottky diode is calculated to be higher that of an AlGaN/GaN diode.     

Breakdown characteristics of AlGaN/GaN Schottky barrier diodes fabricated on a silicon substrate

In this work, the breakdown characteristics of AlGaN/GaN planar Schottky barrier diodes(SBDs) fabricated on the silicon substrate are investigated. The breakdown voltage(BV) of the SBDs first increases as a function of the anodeto-cathode distance and then tends to saturate at larger inter-electrode spacing. The saturation behavior of the BV is likely caused by the vertical breakdown through the intrinsic GaN buffer layer on silicon, which is supported by the postbreakdown primary leakage path analysis with the emission microscopy. Surface passivation and field plate termination are found effective to suppress the leakage current and enhance the BV of the SBDs. A high BV of 601 V is obtained with a low on-resistance of 3.15 mΩ·cm2.     

Breakdown characteristics of AIGaN/GaN Schottky barrier diodes fabricated on a silicon substrate

In this work, the breakdown characteristics of AlGaN/GaN planar Schottky barrier diodes （SBDs） fabricated on the silicon substrate are investigated. The breakdown voltage （BV） of the SBDs first increases as a function of the anodeto-cathode distance and then tends to saturate at larger inter-electrode spacing. The saturation behavior of the BV is likely caused by the vertical breakdown through the intrinsic GaN buffer layer on silicon, which is supported by the post-breakdown primary leakage path analysis with the emission microscopy. Surface passivation and field plate termination are found effective to suppress the leakage current and enhance the BV of the SBDs. A high BV of 601 V is obtained with a low on-resistance of 3.15 mΩ·cm^2.     

Leakage current reduction by thermal oxidation in Ni/Au Schottky contacts on lattice-matched In0.18Al0.82N/GaN heterostructures

By using temperature-dependent current–voltage, variable-frequency capacitance–voltage, and Hall measurements,the effects of the thermal oxidation on the electrical properties of Ni/Au Schottky contacts on lattice-matched In0.18Al0.82N/GaN heterostructures are investigated. Decrease of the reverse leakage current down to six orders of magnitude is observed after the thermal oxidation of the In0.18Al0.82N/GaN heterostructures at 700oC. It is confirmed that the reverse leakage current is dominated by the Frenkel–Poole emission, and the main origin of the leakage current is the emission of electrons from a trap state near the metal/semiconductor interface into a continuum of electronic states associated with the conductive dislocations in the InxAl1-xN barrier. It is believed that the thermal oxidation results in the formation of a thin oxide layer on the InxAl1-xN surface, which increases the electron emission barrier height.     

Enhancement of Breakdown Voltage in AlGaN/GaN High Electron Mobility Transistors Using Double Buried p-Type Layers

A novel AlGaN/GaN high electron mobility transistor(HEMT) with double buried p-type layers(DBPLs) in the GaN buffer layer and its mechanism are studied.The DBPL AlGaN/GaN HEMT is characterized by two equi-long p-type GaN layers which are buried in the GaN buffer layer under the source side.Under the condition of high-voltage blocking state,two reverse p-n junctions introduced by the buried p-type layers will effectively modulate the surface and bulk electric fields.Meanwhile,the buffer leakage is well suppressed in this structure and both lead to a high breakdown voltage.The simulations show that the breakdown voltage of the DBPL structure can reach above 2000 V from 467 V of the conventional structure with the same gate-drain length of 8μm.     

A gate enhanced power U-shaped MOSFET integrated with a Schottky rectifier

An accumulation gate enhanced power U-shaped metal-oxide-semiconductor field-effect-transistor(UMOSFET) integrated with a Schottky rectifier is proposed.In this device,a Schottky rectifier is integrated into each cell of the accumulation gate enhanced power UMOSFET.Specific on-resistances of 7.7 m.mm 2 and 6.5 m.mm 2 for the gate bias voltages of 5 V and 10 V are achieved,respectively,and the breakdown voltage is 61 V.The numerical simulation shows a 25% reduction in the reverse recovery time and about three orders of magnitude reduction in the leakage current as compared with the accumulation gate enhanced power UMOSFET.     

AlGaN/GaN HEMTs on 4-Inch Silicon Substrates in the Presence of 2.7-μm -Thick Epilayers with the Maximum Off-State Breakdown Voltage of 500 V

We report on the high breakdown performance of AlGaN/GaN high electron mobility transistors （HEMTs） grown on 4-inch silicon substrates. The HEMT structure including three Al-content step-graded AlGaN transition layers has a total thickness of 2.7 μm. The HEMT with a gate width WG of 300 μm acquires a maximum off-state breakdown voltage （BV） of 550 V and a maximum drain current of 527 mA/mm at a gate voltage of 2 V. It is found that BV is improved with the increase of gate-drain distance LGD until it exceeds 8 μm and then BV is tended to saturation. While the maximum drain current drops continuously with the increase of LGD. The HEMT with a WG of 3 mm and a LGD of 8 μm obtains an off-state BV of 500 V. Its maximum leakage current is just 13 μA when the drain voltage is below 400 V. The device exhibits a maximum output current of 1 A with a maximum transconductance of 242 mS.     

Numerical and experimental study of the mesa configuration in high-voltage 4H–SiC PiN rectifiers

The effect of the mesa configuration on the reverse breakdown characteristic of a SiC PiN rectifier for high-voltage applications is analyzed in this study.Three geometrical parameters,i.e.,mesa height,mesa angle and mesa bottom corner,are investigated by numerical simulation.The simulation results show that a deep mesa height,a small mesa angle and a smooth mesa bottom(without sub-trench) could contribute to a high breakdown voltage due to a smooth and uniform surface electric field distribution.Moreover,an optimized mesa structure without sub-trench(mesa height of 2.2 μm and mesa angle of 20°) is experimentally demonstrated.A maximum reverse blocking voltage of 4 kV and a forward voltage drop of 3.7 V at 100 A/cm~2 are obtained from the fabricated diode with a 30-μm thick N~- epi-layer,corresponding to 85% of the ideal parallel-plane value.The blocking characteristic as a function of the JTE dose is also discussed for the PiN rectifiers with and without interface charge.     

Edge termination study and fabrication of a 4Hben SiC junction barrier Schottky diode

The 4H-SiC junction barrier Schottky (JBS) diodes terminated by field guard rings and offset field plate are designed, fabricated and characterized. It is shown experimentally that a 3-μm P-type implantation window spacing gives an optimum trade-off between forward drop voltage and leakage current density for these diodes, yielding a specific on-resistance of 8.3 mΩ·cm². A JBS diode with a turn-on voltage of 0.65 V and a reverse current density less than 1 A/cm² under 500 V is fabricated, and the reverse recovery time is tested to be 80 ns, and the peak reverse current is 28.1 mA. Temperature-dependent characteristics are also studied in a temperature range of 75 ℃-200 ℃. The diode shows a stable Schottky barrier height of up to 200 ℃ and a stable operation under a continuous forward current of 100 A/cm².     

Modeling of 4H--SiC multi-floating-junction Schottky barrier diode

This paper develops a new and easy to implement analytical model for the specific on-resistance and electric field distribution along the critical path for 4H-SiC multi-floating junction Schottky barrier diode. Considering the charge compensation effects by the multilayer of buried opposite doped regions, it improves the breakdown voltage a lot in comparison with conventional one with the same on-resistance. The forward resistance of the floating junction Schottky barrier diode consists of several components and the electric field can be understood with superposition concept, both are consistent with MEDICI simulation results. Moreover, device parameters are optimized and the analyses show that in comparison with one layer floating junction, multilayer of floating junction layer is an effective way to increase the device performance when specific resistance and the breakdown voltage are traded off. The results show that the specific resistance increases 3.2 mΩ·cm 2 and breakdown voltage increases 422 V with an additional floating junction for the given structure.     

Comparison of electrical characteristic between AIN/GaN and AIGaN/GaN heterostructure Schottky diodes

Ni/Au Schottky contacts on A1N/GaN and A1GaN/GaN heterostructures are fabricated. Based on the measured current-voltage and capacitance-voltage curves, the electrical characteristics of AlN/GaN Schottky diode, such as Schottky barrier height, turn-on voltage, reverse breakdown voltage, ideal factor, and the current-transport mechanism, are analyzed and then compared with those of an A1GaN/GaN diode by self-consistently solving Schrodinger＇s and Poisson＇s equations. It is found that the dislocation-governed tunneling is dominant for both AlN/GaN and AlGaN/GaN Schottky diodes. However, more dislocation defects and a thinner barrier layer for AlN/GaN heterostrncture results in a larger tunneling probability, and causes a larger leakage current and lower reverse breakdown voltage, even though the Schottky barrier height of AlN/GaN Schottky diode is calculated to be higher that of an A1GaN/GaN diode.     

High density Al2O3/TaN-based metal--insulator-- metal capacitors in application to radio frequency integrated circuits

Metal-insulator-metal （MIM） capacitors with atomic-layer-deposited Al2O3 dielectric and reactively sputtered TaN electrodes in application to radio frequency integrated circuits have been characterized electrically. The capacitors exhibit a high density of about 6.05 fF/μm^2, a small leakage current of 4.8 × 10^-8 A/cm^2 at 3 V, a high breakdown electric field of 8.61 MV/cm as well as acceptable voltage coefficients of capacitance （VCCs） of 795 ppm/V2 and 268ppm/V at 1 MHz. The observed properties should be attributed to high-quality Al2O3 film and chemically stable TaN electrodes. Further, a logarithmically linear relationship between quadratic VCC and frequency is observed due to the change of relaxation time with carrier mobility in the dielectric. The conduction mechanism in the high field ranges is dominated by the Poole-Frenkel emission, and the leakage current in the low field ranges is likely to be associated with trap-assisted tunnelling. Meanwhile, the Al2O3 dielectric presents charge trapping under low voltage stresses, and defect generation under high voltage stresses, and it has a hard-breakdown performance.     

Study and optimal simulation of 4H-SiC floating junction Schottky barrier diodes’ structures and electric properties

This paper stuides the structures of 4H-SiC floating junction Schottky barrier diodes. Some structure parameters of devices are optimized with commercial simulator based on forward and reverse electrical characteristics. Compared with conventional power Schottky barrier diodes, the devices are featured by highly doped drift region and embedded floating junction layers, which can ensure high breakdown voltage while keeping lower specific on-state resistance, and solve the contradiction between forward voltage drop and breakdown voltage. The simulation results show that with optimized structure parameter, the breakdown voltage can reach 4.36 kV and the specific on-resistance is 5.8 mΩ·cm2 when the Baliga figure of merit value of 13.1 GW/cm2 is achieved.     

Non-recessed-gate quasi-E-mode double heterojunction AIGaN/GaN high electron mobility transistor with high breakdown voltage

A non-recessed-gate quasi-E-mode double heterojunction A1GaN/GaN high electron mobility transistor （quasi-E- DHEMT） with a thin barrier, high breakdown voltage and good performance of drain induced barrier lowering （DIBL） was presented. Due to the metal organic chemical vapor deposition （MOCVD） grown 9-nm undoped A1GaN barrier, the effect that the gate metal depleted the two-dimensiomal electron gas （2DEG） was greatly impressed. Therefore, the density of carriers in the channel was nearly zero. Hence, the threshold voltage was above 0 V. Quasi-E-DHEMT with 4.1%tm source-to-drain distance, 2.6-μm gate-to-drain distance, and 0.5-μm gate length showed a drain current of 260 mA/mm. The threshold voltage of this device was 0.165 V when the drain voltage was 10 V and the DIBL was 5.26 mV/V. The quasi-E-DHEMT drain leakage current at a drain voltage of 146 V and a gate voltage of -6 V was below 1 mA/mm. This indicated that the hard breakdown voltage was more than 146 V.