Synthesis, characterization and thermal properties of metaloquinolate-containing polymers

The monomer, 5-methyl(2-methacryloylethyloxy)-8-quinolinol(HEMA-CH₂-Hq), which possesses both double bond and 8-hydroxyquinoline groups, was synthesized from 2-hydroxyethyl methacrylate (HEMA) and 5-chloromethyl-8-quinolinol hydrochloride. The model polymer with 8-hydroxyquinoline ligands was obtained by free-radical copolymerization with styrene. So metaloquinolate (AlQ₃, ZnQ₂)-containing polymers are prepared by coordinating reaction with di(8-hydroxyquinoline) aluminum(AlQ₂) chelates or mono(8-hydroxyquinoline) zinc(ZnQ) chelates without cross-linking. Both polymer and polymer complexes were analyzed by FT-IR, UV-vis, DSC, TGA and photoluminescence spectroscopies. They are soluble in common solvents and easy to form films. The use of AlQ₂ and ZnQ avoided the cross-linking caused by the AlQ₃, ZnQ₂ formation between different polymer chains. High glass transition temperature, good thermal stability, and strong yellow-green fluorescence were observed for the prepared polymers. These polymers were expected to have the potential application in yellow-green OLEDs.     

Synthesis and thermal behaviour of gallium-substituted aluminosilicate inorganic polymers

A combined sol-gel and solid-state method reported for the synthesis of gallium silicate analogues of aluminosilicate inorganic polymers has also been extended to the formation of related compounds with a range of Al-for Ga substitutions. Homogeneous, robust products were obtained at an optimum composition of SiO(2):(Ga(2)O(3) + Al(2)O(3)) = 7. After curing at 40 °C, all the products were typically X-ray amorphous, and the Al and Ga was shown by (27)Al and (71)Ga MAS NMR spectroscopy to be in solely tetrahedral coordination. The (29)Si MAS NMR spectra were as expected for silicate inorganic polymers, but also indicated the presence of some unreacted silica. Electron microscopy in conjunction with EDS elemental mapping showed that the Ga, Al and Si was homogeneously distributed in the products. Thermal treatment of these compounds results in endothermic water loss at about 75-160 °C followed by an exothermic event at about 950 °C corresponding to crystallization of KGaSi(2)O(6) in the gallium end-member. By contrast, the Al-substituted compounds never fully crystallised, but melted at 1200 °C to an X-ray amorphous product.     

Synthesis and thermal dissociation of polymers having hemiacetal ester moieties

Polymers having hemiacetal ester moieties in the side chain were synthesized and their thermal dissociation was examined. 1‐Alkoxyethyl methacrylates (1) were synthesized from methacrylic acid with alkyl vinyl ethers and their radical copolymerizations with butyl methacrylate were carried out at 80°C for 6.5 h using AIBN as an initiator to afford the corresponding copolymers having the hemiacetal ester moieties in the side chain. The hemiacetal ester moieties in the copolymers thermally converted to carboxyl groups with elimination of the corresponding vinyl ethers. The thermal dissociation of the hemiacetal ester moieties in the side chain obeyed first‐order kinetics at 140°C, and their reactivities were in the following order: 1‐(tert‐butoxy)ethyl > 1‐isopropoxyethyl > 1‐ethoxyethyl > 1‐butoxyethyl ester. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 609–614, 1999     

Synthesis and thermal and spectroscopic properties of macrocyclic vinyl aromatic polymers

Well‐defined and narrow molecular weight distribution macrocyclic poly(2‐vinylnaphthalene) (P2VN) and poly(2‐vinyl‐9,9‐dimethylfluorene) (PDMVF) containing a single 1,4‐benzylidene or 9,10‐anthracenylidene unit have been synthesized via the potassium naphthalide initiated polymerization of the monomers followed by the end‐to‐end coupling of the resulting P2VN dianions under high‐dilution conditions with 1,4‐bis(bromomethyl)benzene or 9,10‐bis(chloromethyl)anthracene. Molecular characterization has been carried out by size exclusion chromatography, nuclear magnetic resonance, differential scanning calorimetry, ultraviolet–visible spectroscopy, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. The thermal properties show distinct differences between the cyclic and matching linear polymers, with the macrocycles showing much higher glass‐transition and decomposition temperatures. The absorption bands are both hyperchromic and hypochromic with respect to the model aromatic compounds, and this is consistent with intensity borrowing. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5488–5503, 2004     

Sulphur-containing polymers: Synthesis and thermal properties of novel polyesters based on dithiotriethylene glycol

Poly(dithiotriethylene terephthalate) (PSSTET), poly(dithiotriethylene adipate) (PSSTEA), poly(triethylene terephthalate) (PTET) and poly(triethylene adipate) (PTEA), these two last for comparison, were synthesized and characterized in terms of chemical structure and molecular weight. The thermal behaviour was examined by thermogravimetric analysis and differential scanning calorimetry. All the polymers showed a good thermal stability, even though lower for the sulphur-containing polyesters. At room temperature they appeared as semicrystalline materials, except PTEA, which was an oil; the effect of substitution of ether oxygen atoms with sulphur ones was found to be a lowering in the T_g value, an increment of the melting temperature and an increase of the crystallization rate. The results were explained as due to the presence of flexible C-S-C bonds in the polymeric chain. Lastly, the absence of a rigid-amorphous phase was evidenced in PSSTET and PTET.     

Synthesis,spectroscopic and thermal characterization of new metal-containing isocyanate-based polymers

Journal of Thermal Analysis and Calorimetry - To overcome the polyurethanes low heat resistance and obtain new PU-based materials, in continuation of our research in the synthesis of hybrid...     

Synthesis, characterization, and thermal properties of new silarylene-siloxane-acetylene polymers

New silarylene-siloxane-acetylene polymers have been synthesized by coupling reactions employing 1,3-bis(p-ethynylphenyl)-1,1,3,3-tetraphenyldisiloxane (3) as the key monomer. Their thermal properties have been evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). All of the new polymers showed good thermal stability, with their temperatures at 5% weight loss (T_d5) being higher than 540 °C under nitrogen and higher than 460 °C in air. Their char yields at 1000 °C under N₂ were above 80%. Broad exothermic peaks, attributable to reaction of the acetylenic units, were observed by DSC analysis in the temperature range 270-450 °C.     

Synthesis and thermal crosslinking of carbosiloxane and oligo(oxyethylene) polymers

Acyclic diene metathesis (ADMET) polymerization has been used in the synthesis of telechelic materials using alkoxy‐functionalized carbosiloxane or oligo(oxyethylene)‐based polymers, varying from internal to terminal cured materials or the combination of them. Previous investigations demonstrated that introduction of chain‐end crosslinking improves the stress–strain behavior of such materials. A series of saturated and unsaturated carbosiloxane and oligo(oxyethylene)‐based polymers were synthesized by ADMET polymerization using silacyclobutane as chain‐end, thermally induced crosslinker. The carbosiloxane derivatives presented pure amorphous behavior, whereas the oligo(oxyethylene) polymers were semicrystalline. The thermal curing process was monitored by differential scanning calorimetry via the exotherm between 160 and 210 °C. Mechanical properties on thermoset polymers were measured, where cured polymers showed moduli from 0.6 to 9.3 MPa, tensile strengths from 0.3 to 1.0 MPa, and elongations from 12 to 76%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and thermal crosslinking reaction of polymers containing pendant carboxyl and epoxy groups

Polymers containing both pendant carboxyl and epoxy groups were synthesized by the radical copolymerization of p-vinylbenzyl glycidyl ether (VBGE) and itaconic acid monomethyl ester (IAME). The copolymerization proceeded smoothly under various conditions, and polymer soluble in 1,4-dioxane with no gel fraction was obtained. However, the carboxyl-epoxy addition reaction between VBGE and IAME was observed, when DMSO or DMF were used as polymerization solvents. The IR and ¹H-NMR spectrum of copolymers of VBGE and IAME showed the corresponding structure. The thermal crosslinking reaction of the resulting copolymers was examined under various conditions. Tetrabutylammonium bromide (TBAB) showed catalytic activity for the reaction. However, a 100% gel fraction of polymer was achieved after only 15 min without any catalyst, when the crosslinking reaction was performed at 150°C. © 1996 John Wiley & Sons, Inc.     

Synthesis,thermal degradation,and kinetic parameters studies of some coordination polymers

This article describes synthesis and route of thermal degradation and studies of kinetic parameters of some coordination polymers of first transition series metal ions viz. Mn(II), Co(II), Ni(II), Cu(II), and Zn(II). The newly synthesized ligand and its coordination polymers have been characterized by various instrumental techniques. The thermal degradation studies have been studied at different heating rates to determine the apparent activation energy, order of reaction, entropy change, free energy change, apparent entropy change, and frequency factor using Sharp–Wentworth and Freeman–Carroll methods. Thermo gravimetric analysis (TGA) has been used to determine the thermal stability of coordination polymers. The decomposition temperatures of the polymers were defined by half decomposition curve technique.     

Synthesis,characterization, thermal stability and compatibility properties of new energetic polymers

Four new cross-linked polymers poly(vinyl m-nitrobenzene)-polyglycidylazides (PVMNB-GAPs) were successfully synthesized using toluene diisocyanate as the cross-linking agent. Their structure was confirmed by their FTIR, UV–Vis, ¹H and ¹³C NMR spectroscopy. Moreover, the thermal properties of cross-linked polymers were evaluated by DTA, TGA and DSC techniques, which confirmed that synthesized polymers exhibited good resistance to thermal decomposition up to 200°C. In addition, their compatibility with the main energetic components of 2,4,6-trinitrotoluene-based melt-cast explosives were also evaluated by the non-isothermal differential thermal analysis method.     

Synthesis and thermal study of polyamides and polyaspartimides

Copolymers were synthesized by polyaddition reactions of aromatic diamine (4,4′-sulphonyl dianiline) and aliphatic diamines (1,2-diaminoethane and 1,3-diaminopropane) with N,N′-arylenebismaleimides (N,N′-m-phenylene-N,N′-p-phenylene-, and N,N′-benzidine-). They were characterized by elemental analysis, i.r. spectra and viscosity. The thermal behaviour of copolymers was studied using Thermogravimetric Analysis (TGA). All the copolymers are stable up to 270°. Polyamides are less stable than polyaspartimides.     

Synthesis,characterization of new bisphenol-based benzoxazines and the thermal properties of their polymers

Journal of Thermal Analysis and Calorimetry - New bisphenol-based benzoxazines (BBA-a and BBA-bra) were synthesized from bisphenol containing trityl group, paraformaldehyde, aniline and...     

Ferrocene polymers. Synthesis and thermal polymerization of α-chloro-β-formyl-p-ferrocenylstyrene

The synthesis and thermal polymerization of a new chloroformylated vinyl derivative containing a ferrocenyl residue are reported.The reactivity of α-chloro-β-formyl-p-ferrocenylstyrene in the polymerization reaction is discussed in the light of the experiment results and data obtained from molecular orbital calculations using the Hückel approximation.     

Synthesis, characterization and thermal properties of novel PMDA-PAPD/silica hybrid network polymers

Novel PMDA-PAPD/silica hybrid polymers were synthesized by the sol-gel process. Fourier transform infrared spectroscopy and ²⁹Si nuclear magnetic resonance spectroscopy were used to characterize the structure of the hybrids, (condensed siloxane bonds designated as Q¹, Q², Q³, Q⁴, wth 3-aminopropyltriethoxysilane having mono-, di-, tri-, tetra-substituted siloxane bonds is designated as T¹, T² and T³). The results revealed that Q³, Q⁴ and T³ are the major microstructure elements in forming a network structure. The surface morphology, particle size, crystallinity and the thermal stability of the hybrids were investigated using Scanning electron microscopy (SEM), Transmission Electron Microscopy (TEM), X-ray diffraction (XRD), Thermogravimetric analysis (TGA) and Differential Scanning Calorimetry (DSC). SEM and TEM revealed that the hybrids were nanocomposites. The XRD indicated that covalent bonding (Si-O-Si) between the organic and inorganic components enhanced miscibility. DSC and TGA results showed that these hybrid materials had excellent thermal stability. The heat capacities of some materials were reported for the temperature range 273 K and 363 K as no thermal anomaly was found in this temperature range.     

Synthesis,spectral and thermal studies on pyrazolatebridged palladium(II) coordination polymers

Synthesis, spectroscopic characterization and thermal behavior of pyrazolate-bridged palladium complexes [Pd(μ-Pz)₂]_n (1), [Pd(μ-mPz)₂]_n (2), [Pd(μ-dmPz)₂]_n (3), [Pd(μ-IPz)₂]_n (4) {pyrazolate (Pz^–), 4-methylpyrazolate (mPz^–), 3,5-dimethylpyrazolate (dmPz^–), 4-iodopyrazolate (IPz^–)} have been described in this work. The exobidentate coordination mode of pyrazolato ligands in 1–4 was inferred on basis of IR spectroscopic evidences. TG investigations indicated that the introduction of substituents at the 4 position in the pyrazolyl moiety into coordination polymers do not affect significantly their thermal stability, whereas at the 3 and 5 position reduced the stability of the main chain. Metal palladium was the final product of the thermal decompositions, which was identified by X-ray powder diffraction.     

Synthesis, characterization and thermal degradation of functional benzoxazine monomers and polymers containing phenylphosphine oxide

Three phosphorus-containing bisphenol compounds, bis(4-hydroxyphenyl)phenylphosphine oxide (BHPPO), bis(4-hydroxyphenoxyphenyl)phenylphosphine oxide (BPPPO), and bis(4-hydroxyphenoxy)phenylphosphine oxide (BPHPPO) have been synthesized as starting materials for the synthesis of benzoxazine monomers. Benzoxazine monomers containing phenylphosphine oxide have been prepared and subsequently characterized by FT-IR and ¹H NMR. The monomers are thermally initiated and polymerized via ring-opening polymerization. Thermogravimetric analysis indicates that phosphorylation can have a profound effect on increasing char yield and on thermal degradation temperatures.     

Unsaturated polyoxalates: Synthesis and mass spectral study of their thermal behavior

The thermal decomposition of a series of four saturated and unsaturated C₄ polyoxalates shows competing modes of depolymerization, fragmentation to polyenes and CO₂, and crosslinking. These decompositions, which were studied by DSC and TGA, and intensively by EI- and CI-MS, could be rationalized in terms of the structure of the alcohol portions of the polyesters. The polymers were synthesized by ester interchange, which gave materials with DP values of 5–32.