Influence of various thickness metallic interlayers on opto-electric and mechanical properties of AZO thin films on PET substrates

Various thickness metallic interlayers to improve the opto-electric and mechanical properties of aluminum-doped zinc oxide (AZO) thin films deposited on flexible polyethylene terephtalate (PET) substrates are studied. The effects of the interlayers on the resistance and transmittance of the AZO thin films are discussed. The result shows that the metallic interlayers effectively improve the electric resistance but reduce the optical transmittance of the AZO thin films. These phenomena become more obvious as the interlayer thickness increases. However, the AZO with an aluminum interlayer still behaves an acceptable transmittance. Moreover, mechanical tests indicate that the aluminum interlayer increases the hardness and modulus, and reduce the residual stress of the AZO thin films. In contrast, the silver and copper interlayers decrease the AZO's mechanical properties. Comparing to those without any interlayer, the results show that the best interlayer is the 6 nm thick aluminum film.     

Optical and electrical properties of aluminum zinc oxide (AZO) nanostructured thin film deposited on polycarbonate substrate

Transparent polymer materials, due to their unique properties, such as light weight, optical transparency, and electrical and mechanical properties, have become very attractive as a replacement for inorganic glass substrates in a wide range of optoelectronic applications. In this research, aluminum zinc oxide nanostructured thin film was deposited on polycarbonate polymer substrates using a magnetron sputtering technique. The structure, morphology, and surface composition of the thin film were investigated by X-ray diffraction and field emission scanning electron microscopy. The optical and electrical properties of the thin film were investigated by UV–VIS-NIR spectrophotometer, ellipsometer, and four point probe method. The X-ray diffraction pattern showed that the aluminum zinc oxide thin film had a polycrystalline structure. The optical and electrical results indicated that the refractive index, band gap, and sheet resistance of the aluminum zinc oxide thin film were 1.8, 3.2 eV, and 265 Ω/sq, respectively.     

Effects of annealing on structural,optical and electrical properties of Al-doped ZnO thin films

Transparent conducting oxide (TCO) thin films such as SnO2, In2O3, and Cd2SnO4, have been used extensively as sensor devices, surface acoustic wave devices, coating to heat glass windows and transparent electrodes for solid state display devices, solar cells[1,2] because of their high optical transparency in the visible range, infrared reflec-tance and low d.c. resistivity. Although SnO2 film was developed early, nowadays Sn-doped In2O3 (ITO) films are the predominant TCO thin film in …     

Influence of iodine on the electrical properties of magnesium phthalocyanines thin film devices

The influence of iodine on the electrical properties of sandwich structures of magnesium phthalocyanine (Mg Pc) thin films with gold and aluminium electrodes has been investigated. The various electrical properties and different electrical parameters of the iodine-doped Mg Pc thin film devices have been estimated and compared with the values of normal Mg Pc devices from the analysis of the current-voltage characteristics. Generally samples showed an asymmetric conductivity both under forward and reverse bias. From our study we found that iodine doped Mg Pc films showed an enhanced electrical conductivity of nearly ten times that of typical Mg Pc. At low voltages the films showed an ohmic conduction with a hole concentration of P₀ = 6.34 × 10¹⁸ m⁻³ and hole mobility μ = 9.16 × 10⁻⁵ m ² V⁻¹ s⁻¹, whereas at higher voltage levels the conduction is dominated by space charged limited conduction (SCLC) with a discrete trapping level of 1.33 × 10²² m⁻³ at 0.63 eV above the valance band edge. The ratio of the free charges to trapped charges (trapping factor) for the doped samples was found to be 1.07 × 10⁻⁷. Furthermore the reverse conduction mechanisms have also been investigated. From the current limitations in the reverse condition a strong rectifying behaviour was evident which was attributed to Poole-Frankel emission with a field-lowering coefficient of value 2.24 × 10⁻⁵ eV m^1/2 V^−1/2.     

(Zr,V)N复合膜的结构、力学性能及摩擦性能研究

通过非平衡磁控溅射的方法制备了不同V含量的(Zr,V)N复合薄膜, 采用EDS, XRD, XPS, 纳米压痕仪和摩擦磨损仪等对薄膜的化学成分、微结构、力学性能及摩擦性能进行了研究. 结果表明, V的加入虽未改变ZrN的fcc晶体结构, 但使薄膜的择优取向由ZrN的(200)面转变为(Zr,V)N的(111)面. 随着V含量增加, (Zr,V)N复合膜的硬度略有升高后缓慢降低, 并在含25.8 at.%V后迅速降低. 与此同时, 薄膜的常温摩擦系数亦有小幅降低. 高温摩擦研究表明, (Zr,V)N薄膜在300 ℃时出现V₂O₃, V₂O₅ 在500 ℃后形成, 其含量也随温度的提高而增加. 薄膜的摩擦系数因V₂O₅ 的形成而得到显著降低. 关键词： (Zr,V)N 薄膜 微结构 力学性能 摩擦性能     

Laser radiation effects on optical and structural properties of nanostructure CdSe thin film

Cadmium selenide (CdSe) thin films were deposited on a glass substrate using the thermal evaporation method at room temperature. The changes in the optical properties (optical band gap and absorption coefficient) after irradiation by TEA N₂ laser at different energies were measured in the wavelength range 190–800 nm using a spectrophotometer. It was found that the optical band gap is decreased after irradiating the thin films. The samples were characterized using X-ray diffraction (XRD), and the grain size of the CdSe thin film was calculated from XRD data, which was found to be 41.47 nm as-deposited. It was also found that grain size increases with laser exposure. The samples were characterized using a scanning electron microscope and it was found that big clusters were formed after irradiation by TEA N₂ laser.     

Effects of rapid thermal annealing on structural, magnetic and optical properties of Ni-doped ZnO thin films

XPS depth profiles were used to investigate the effects of rapid thermal annealing under varying conditions on the structural, magnetic and optical properties of Ni-doped ZnO thin films. Oxidization of metallic Ni from its metallic state to two-valence oxidation state occurred in the film annealed in air at 600 °C, while reduction of Ni²⁺ from its two-valence oxidation state to metallic state occurred in the film annealed in Ar at 600 and 800 °C. In addition, there appeared to be significant diffusion of Ni from the bottom to the top surface of the film during annealing in Ar at 800 °C. Both as-deposited and annealed thin films displayed obvious room temperature ferromagnetism (RTFM) which was from metallic Ni, Ni²⁺ or both with two distinct mechanisms. Furthermore, a significant improvement in saturation magnetization (M_s) in the films was observed after annealing in air (M_s = 0.036 μ_B/Ni) or Ar (M_s = 0.033 μ_B/Ni) at 600 °C compared to that in as-deposited film (M_s = 0.017 μ_B/Ni). An even higher M_s value was observed in the film annealed in Ar at 800 °C (M_s = 0.055 μ_B/Ni) compared to that at 600 °C mainly due to the diffusion of Ni. The ultraviolet emission of the Ni-doped ZnO thin film was restored during annealing in Ar at 800 °C, which was also attributed to the diffusion of Ni.     

Influence of Al doping on microstructure,morphology, optical and photoluminescence properties of pyrolytic ZnO thin films prepared in an ambient atmosphere

Zinc oxide (ZnO) and aluminium (Al) doped zinc oxide (AZO) thin films have been fabricated by spray pyrolysis technique in normal atmospheric condition. Samples of different Al-concentrations (0–5% Al) were deposited at 350 °C onto glass substrate to study the structural, morphological, optical and photoluminescence properties. X-ray diffraction study confirms that the films are polycrystalline having hexagonal structure. SEM images show that the films have rope and tube like morphology. Optical properties, such as transmittance, optical band gap, extinction coefficient, refractive index, optical conductivity, dielectric constants and electron energy loss functions were analyzed and discussed. Results show that the optical parameters have been changed significantly with Al-doping concentration. The photoluminescence spectra indicate that the PL peaks originated from deep level emissions (DLE) with different intensities for ZnO and Al-doped ZnO films.     

Effect of K-doping on structural and optical properties of ZnO thin films

In this work, K-doped ZnO thin films were prepared by a sol–gel method on Si(111) and glass substrates. The effect of different K-doping concentrations on structural and optical properties of the ZnO thin films was studied. The results showed that the 1 at.% K-doped ZnO thin film had the best crystallization quality and the strongest ultraviolet emission ability. When the concentration of K was above 1 at.%, the crystallization quality and ultraviolet emission ability dropped. For the K-doped ZnO thin films, there was not only ultraviolet emission, but also a blue emission signal in their photoluminescent spectra. The blue emission might be connected with K impurity or/and the intrinsic defects (Zn interstitial and Zn vacancy) of the ZnO thin films.     

Properties of ZnO thin films deposited on (glass,ITO and ZnO:Al) substrates

ZnO thin films were deposited on glass, ITO (In₂O₃; Sn) and on ZnO:Al coated glass by spray pyrolysis. The substrates were heated at 350 °C. Structural characterization by X-ray diffraction (XRD) measurements shows that films crystallize in hexagonal structure with a preferential orientation along (0 0 2) direction. XRD peak-shift analysis revealed that films deposited on glass substrate (−0.173) were compressive, however, films deposited onto ITO (0.691) and on ZnO:Al (0.345) were tensile. Scanning electron microscopies (SEM) show that the morphologies of surface are porous in the form of nanopillars. The transmittance spectra indicated that the films of ZnO/ITO/glass and ZnO/ZnO:Al/glass exhibit a transmittance around 80% in the visible region. An empirical relationship modeled by theoretical numerical models has been presented for estimating refractive indices (n) relative to energy gap. All models indicate that the refractive index deceases with increasing energy band gap (E_g).     

Influence of thickness and crystalline structure on thermal and optical properties of ZnO thin films

Measurements of the temperature dependence of refractive index of ZnO thin films and thermal diffusivity using photothermal deflection technique are presented. Thin film thickness and surface homogeneity were found to be the effective parameters on optical and thermal properties of the thin films. High refractive index gradient with temperature was found for films of a nonuniform distribution and gathered in clusters, and a high predicted value for thermal diffusivity. Optical properties of the thin films revealed that films with disorder in the deposition and gathered clusters showed poor transmittance in visible region with a pronounced peak in the near IR, and also a reduction in the band gap. A detailed parametric analysis using analytical solution of one-dimensional heat equation had been performed. A discontinuity in the temperature elevation at the ZnO-glass interface was found.     

Influence of glucose on the structural and optical properties of ZnO thin films prepared by sol-gel method

In this work, ZnO thin films were prepared by sol-gel method on glass substrates followed by calcinations at 500 °C for an hour. The effect of glucose on the structure and optical properties of the films was studied. The structural characteristics of the samples were analyzed by X-ray diffractometer (XRD) and atomic force microscope (AFM). The optical properties were studied by a UV-visible spectrophotometer. The results show that some of the prepared ZnO thin films have a high preferential oriented c-axis orientation with compact hexagonal wurtzite structure due to a proper amount of glucose introducing. After introducing the glucose additive in ZnO colloids, the intensity of (002) peak, the transmittance, and the optical band gap of the ZnO thin films increases because of the enhanced ZnO crystallization. On the contrary, the absorbance, the film thickness, and the surface root-mean-square (RMS) roughness of the ZnO thin films decreases. The glucose additive could not only improve the surface RMS roughness and microstructure of ZnO thin films, but also enhance the transmittance and the energy band gap more easily.     

Effects of post-annealing on the structural and nanomechanical properties of Ga-doped ZnO thin films deposited on glass substrate by rf-magnetron sputtering

In this study, the effects of post-annealing on the structure, surface morphology and nanomechanical properties of ZnO thin films doped with a nominal concentration of 3 at.% Ga (ZnO:Ga) are investigated using X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM) and nanoindentation techniques. The ZnO:Ga thin films were deposited on the glass substrates at room temperature by radio frequency magnetron sputtering. Results revealed that the as-deposited ZnO:Ga thin films were polycrystalline albeit the low deposition temperature. Post-annealing carried out at 300, 400 and 500 °C, respectively, has resulted in progressive increase in both the average grain size and the surface roughness of the ZnO:Ga thin film, in addition to the improved thin films crystallinity. Moreover, the hardness and Young's modulus of ZnO:Ga thin films are measured by a Berkovich nanoindenter operated with the continuous contact stiffness measurements (CSM) option. The hardness and Young's modulus of ZnO:Ga thin films increased as the annealing temperature increased from 300 to 500 °C, with the best results being obtained at 500 °C.     

Influence of thickness on the optical properties of amorphous GeSe2 thin films: analysis using Raman spectra,Urbach energy and Tauc parameter

An analysis is reported of thickness-induced defects in amorphous GeSe₂ thin films deposited by the vacuum evaporation technique. X-ray diffraction studies confirmed the amorphous nature of the thin films. Optical absorption measurements revealed an indirect transition with an energy gap that increases with film thickness. A blue shift in optical transmittance edges was observed in annealed GeSe₂ thin films. The obtained lower values of Urbach energy (E _U) indicate that as thickness increases more ordered films can be produced. Raman spectra suggest that annealing promotes corner-sharing GeSe_4/2 tetrahedra and edge-sharing Ge₂Se_8/2 bi-tetrahedra bonding and leads to the reduction in disorder in bonding network, which is amply supported by the way of increase in band gap, increase in Tauc parameter (B ^1/2) and reduction in E _U from the analysis of transmittance spectra. Increasing the thickness promotes tetrahedral and bi-tetrahedral bonding through the reduction in bonding defects.     

Influence of Ge addition on the optical properties of As40Se50Ge10 thin film probed by spectroscopy techniques

The thin films of As₄₀Se₆₀ and As₄₀Se₅₀Ge₁₀ were prepared on glass substrates by thermal evaporation method with thickness 1000 nm. The prepared films were amorphous in nature which was confirmed through X-ray diffraction. The chemical composition and the surface picture were obtained from energy dispersive X-ray analysis and Scanning Electron Microscopy analysis. The transmission data of the two films were collected in the wavelength range 400–1000 nm. The transmission percentage is found to be decreased whereas the absorption coefficient is increased with the Ge addition. The addition of Ge into As₄₀Se₆₀ is found to increase the refractive index and the extinction coefficient of As₄₀Se₅₀Ge₁₀ thin film. The decrease in optical band gap is explained on the basis of increase in density of states and disorderness due to Ge addition. The optical absorption in the film is due to allowed indirect transition, and the homopolar bond density is increased with Ge addition. The Raman shift observed in the two films clearly supports the optical changes due to Ge addition.     

Influence of annealing temperature on the structural, optical and mechanical properties of ALD-derived ZnO thin films

ZnO thin films grown on Si(1 1 1) substrates by using atomic layer deposition (ALD) were annealed at the temperatures ranging from 300 to 500 °C. The X-ray diffraction (XRD) results show that the annealed ZnO thin films are highly (0 0 2)-oriented, indicating a well ordered microstructure. The film surface examined by the atomic force microscopy (AFM), however, indicated that the roughness increases with increasing annealing temperature. The photoluminescence (PL) spectrum showed that the intensity of UV emission was strongest for films annealed at 500 °C. The mechanical properties of the resultant ZnO thin films investigated by nanoindentation reveal that the hardness decreases from 9.2 GPa to 7.2 GPa for films annealed at 300 °C and 500 °C, respectively. On the other hand, the Young's modulus for the former is 168.6 GPa as compared to a value of 139.5 GPa for the latter. Moreover, the relationship between the hardness and film grain size appear to follow closely with the Hall-Petch equation.     

Influence of Al concentration on electrical, structural and optical properties of Al-As codoped p-ZnO thin films

We report the influence of Al concentration on electrical, structural, optical and morphological properties of Al-As codoped p-ZnO thin films using RF magnetron sputtering. Al-As codoped p-ZnO films with different Al concentrations were fabricated using As back diffusion from the GaAs substrate and sputtering Al₂O₃ mixed ZnO targets (1, 2 and 4 at%). The grown films were investigated by Hall effect measurement, X-ray diffraction (XRD), electron probe microanalysis (EPMA), energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL) and atomic force microscopy (AFM) to study the electrical, structural, optical and morphological properties of the films. From the XRD, it was observed that both full-width at half-maximum (FWHM) and c-axis lattice constant have similar trends with respect to Al concentration. Hall measurements showed that the hole concentration increases as the Al concentration increases from 10¹⁵ to 10²⁰ cm⁻³. The increase in hole concentration upon codoping was supported by the red shift in the near-band-edge (NBE) emission observed from room temperature PL spectra. The proposed p-type mechanism due to As_Zn-2V_Zn complex was confirmed by low temperature PL and XPS analysis. The low FWHM, resistivity and peak-to-valley roughness observed by XRD, Hall measurement and AFM, respectively, suggest that 1 at% Al-doped ZnO:As film is the best codoped film.     

Effect of crystallinity of ZnO buffer layer on the properties of epitaxial (ZnO:Al)/(ZnO:Ga) bi-layer films deposited on c-sapphire substrate

Bi-layer ZnO films with 2 wt.% Al (AZO; ZnO:Al) and 4 wt.% Ga-doped (GZO; ZnO:Ga) were deposited on the ZnO buffered and annealed ZnO buffered c(0 0 0 1)-sapphire(Al₂O₃) substrates respectively by Pulsed Laser Deposition (PLD). The effect of crystallinity of ZnO buffer layer on the crystallinity and electrical properties of the AZO/GZO bi-layer thin films was investigated. It was seen that the crystallinity of ZnO buffer layer had a great influence on the orientation and defect density of AZO/GZO bi-layer thin films from X-ray Diffraction (XRD) peaks and High Resolution Transmission Electron Microscopy (HRTEM) images. In a word, it was found in the films that more preferred c-axis orientation texture and reduction of the defects such as stacking faults and dislocations, with increasing of the crystallinity of ZnO buffer layer.     

退火对Mn和N共掺杂的Zn0.88Mn0.12O:N薄膜特性的影响

以NH₃为掺N源,采用电子束反应蒸发技术生长了Mn和N共掺杂的Zn_1-xMn_xO:N薄膜,生长温度为300℃,然后在O₂气氛中400℃退火0.5 h.X射线衍射测量表明,Zn_0.88Mn_0.12O(Mn掺杂)薄膜或Zn_0.88Mn_0.12O:N(Mn和N共掺杂)薄膜仍具有单一晶相纤锌矿结构,未检测到杂质相 关键词： ZnO薄膜 Mn和N共掺杂 电学特性 磁特性     

Effects of different annealing atmospheres on the surface and microstructural properties of ZnO thin films grown on p-Si (1 0 0) substrates

Effects of different annealing atmospheres on the surface and microstructural properties of ZnO thin films grown on Si (1 0 0) substrates were investigated. X-ray diffraction results showed that the crystallinity of the ZnO thin film annealed in an oxygen atmosphere was better than that annealed in a nitrogen atmosphere. Atomic force microscopy and transmission electron microscopy (TEM) images showed that the surfaces of the ZnO thin films annealed in a nitrogen atmosphere became very rough in contrast to those annealed in an oxygen atmosphere. High-resolution TEM images showed that many stacking faults and tilted grains could be observed in the ZnO thin films annealed in a nitrogen atmosphere in contrast to those annealed in an oxygen atmosphere. Surface morphology and microstructural property variations due to different annealing atmospheres in ZnO thin films are also described on the basis of the experimental results.