Mutual viscosity and NMR spin-lattice relaxation time in some benzoic acids

Experimental values of the NMR spin-lattice relaxation time (T ₁) of o-aminobenzoic acid, p-aminobenzoic acid, o-chlorobenzoic acid, p-chlorobenzoic acid and 2,4-dinitrobenzoic acid and mutual viscosity (η₁₂) of o-chlorobenzoic acid, m-chlorobenzoic acid and p-chlorobenzoic acid have been reported. The experimental values of T ₁ have been correlated with the calculated value of T ₁ obtained using different equations of dielectric relaxation time (τ). It is concluded from this comparative study that Murty's equation is a better representation of the dielectric relaxation phenomenon. It is also concluded that the mutual viscosity (η₁₂) is a better substitute for the resistance to the rotation of the individual solute molecule.     

Layered structure of room-temperature ionic liquids in microemulsions by multinuclear NMR spectroscopic studies

Microemulsions form in mixtures of polar, nonpolar, and amphiphilic molecules. Typical microemulsions employ water as the polar phase. However, microemulsions can form with a polar phase other than water, which hold promise to diversify the range of properties, and hence utility, of microemulsions. Here microemulsions formed by using a room‐temperature ionic liquid (RTIL) as the polar phase were created and characterized by using multinuclear NMR spectroscopy. ¹H, ¹¹B, and ¹⁹F NMR spectroscopy was applied to explore differences between microemulsions formed by using 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([bmim][BF₄]) as the polar phase with a cationic surfactant, benzylhexadecyldimethylammonium chloride (BHDC), and a nonionic surfactant, Triton X‐100 (TX‐100). NMR spectroscopy showed distinct differences in the behavior of the RTIL as the charge of the surfactant head group varies in the different microemulsion environments. Minor changes in the chemical shifts were observed for [bmim]⁺ and [BF₄]^? in the presence of TX‐100 suggesting that the surfactant and the ionic liquid are separated in the microemulsion. The large changes in spectroscopic parameters observed are consistent with microstructure formation with layering of [bmim]⁺ and [BF₄]^? and migration of Cl^? within the BHDC microemulsions. Comparisons with NMR results for related ionic compounds in organic and aqueous environments as well as literature studies assisted the development of a simple organizational model for these microstructures.     

Polymerized ionic liquids: Effects of counter‐anions on ion conduction and polymerization kinetics

A novel imidazolium‐containing monomer, 1‐[ω‐methacryloyloxydecyl]‐3‐(n‐butyl)‐imidazolium (1BDIMA), was synthesized and polymerized using free radical and controlled free radical polymerization followed by post‐polymerization ion exchange with bromide (Br), tetrafluoroborate (BF₄), hexafluorophosphate (PF₆), or bis(trifluoromethylsulfonyl)imide (Tf₂N). The thermal properties and ionic conductivity of the polymers showed a strong dependence on the counter‐ions and had glass transition temperatures (T_g) and ion conductivities at room temperature ranging from 10 °C to −42 °C and 2.09 × 10⁻⁷ S cm⁻¹ to 2.45 × 10⁻⁵ S cm⁻¹. In particular, PILs with Tf₂N counter‐ions showed excellent ion conductivity of 2.45 × 10⁻⁵ S cm⁻¹ at room temperature without additional ionic liquids (ILs) being added to the system, making them suitable for further study as electro‐responsive materials. In addition to the counter‐ions, solvent was found to have a significant effect on the reversible addition‐fragmentation chain‐transfer polymerization (RAFT) for 1BDIMA with different counter‐ions. For example, 1BDIMATf₂N would not polymerize in acetonitrile (MeCN) at 65 °C and only achieved low monomer conversion (< 5%) at 75 °C. However, 1BDIMA‐Tf₂N proceeded to high conversion in dimethylformamide (DMF) at 65 °C and 1BDIMABr polymerized significantly faster in DMF compared to MeCN. NMR diffusometry was used to investigate the kinetic differences by probing the diffusion coefficients for each monomer and counter‐ion in MeCN and DMF. These results indicate that the reaction rates are not diffusion limited, and point to a need for deeper understanding of the role electrostatics plays in the kinetics of free radical polymerizations. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1346–1357     

Investigation of the Anodic Behavior of Al in Room Temperature Ionic Liquid Electrolytes: BMI‐BF4, PP14‐BF4 and BMI‐BF4·PC

The anodic polarization behavior of Al, Ta and Nb foil was investigated in 1‐butyl‐3‐methylimidazolium tetrafluoroborate ionic liquid (BMI‐BF₄). Compared with that of Ta and Nb foil, it showed that a better passive film was formed on Al foil surface after the anodic polarization in BMI‐BF₄, which could resist the potential up to 94.58 V vs. Ag⁺/Ag. Besides, similar anodic behavior of Al foil was observed in N‐methyl‐N‐butylpiperidinium tetrafluoroborate ionic liquid (PP14‐BF₄), which indicated that the anodic polarization behavior of Al foil was independent of the cations of RTIL. In addition, the investigation of anodic polarization behavior of Al foil was carried out in the mixture electrolytes composed of BMI‐BF₄·PC. Differently, two breakdown potential processes of Al foil were presented compared to pure BMI‐BF₄. Further research showed that the passive film on Al foil was mainly composed of AlF₃ and Al₂O₃ after the first breakdown potential process, while the fluoride film increased with continual anodic polarization, which improved the anodic stability of Al foil and resisted higher breakdown potential. The high breakdown potential properties of Al foil in BMI‐BF₄, PP14‐BF₄ and the mixture of BMI‐BF₄·PC during the anodic polarization can be favored for R&D of the high performance electrochemical devices.     

Nuclear magnetic relaxation and diffusion study of the ionic liquids 1-ethyl- and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide confined in porous glass

The molecular dynamics of the room-temperature ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (Bmim Tf2N) confined in porous glass is studied by nuclear magnetic resonance (NMR) relaxometry and diffusometry and is compared with the bulk dynamics over a wide temperature range. The molecular reorientation processes for anions and cations alike are found to be significantly affected by the presence of the glass interface at high temperatures. In this respect, the ionic liquid behaves similarly to polar liquids where proton NMR relaxation is governed by reorientations mediated by translational displacements (RMTDs). This process becomes less significant towards lower temperatures when the characteristic translational correlation times of the ions approach a timescale comparable with those of the RMTD process, and the relaxation dispersions in bulk and in confinement become similar below a temperature corresponding to about 1.2T_g, a value where the onset of dynamic heterogeneity has been observed before. The self-diffusion coefficient, on the other hand, is found to be strongly reduced than the bulk within the accessible temperature range of 248 K and above and is significantly slower than expected from the tortuosity effect, suggesting that ion–surface interactions affect the macroscopic properties.     

Characterization of the molecular reorientational dynamics of the neat ionic liquid 1-butyl-3-methylimidazolium bromide in the super cooled state using 1H and 13C NMR spectroscopy

The (13)C spectra and (13)C longitudinal relaxation times (T(1)) were measured to investigate the segmental motion of the neat ionic liquid 1-butyl-3-methylimidazolium bromide ([bmim]Br) in the super cooled state. The (13)C signals of the imidazole ring significantly broadened at 283 K, whereas many other signals were unchanged. In the process of lowering temperature, the [bmim]Br changed to the solid state at ca 273 K without showing the rapid phase transition. Only the (13)C signal of the terminal methyl group in the butyl chain was still observed at 263 K, indicating that the motion of the imidazole ring was extremely restricted, whereas the methyl group in the butyl chain was active even in the solid state. The (13)C-T(1) values measured as a function of temperature also supported the discrete segmental motions of the [bmim](+) cation.     

Evidence for spin diffusion in a H,H-NOESY study of imidazolium tetrafluoroborate ionic liquids

The ionic liquids 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF4]) and 1-methyl-3-propylimidazolium tetrafluoroborate ([PMIM][BF4]) were studied by H,H-NOESY NMR using a cross-relaxation matrix analysis. Cross-peak intensities are seen to increase with increasing mixing time. Experimental and theoretical hydrogen-hydrogen distances are in agreement at short mixing times (50 ms). Mixing times longer than 50 ms result in an increasing contribution of spin diffusion that produces unrealistically short hydrogen-hydrogen distances. Gas-phase ab initio molecular structures are obtained using Hartree-Fock (HF) and density functional theory (B3LYP) methods at the 6311 + G(2d,p) basis set level. The hydrogen-hydrogen distances obtained from the theoretical structures are in reasonable agreement with those calculated from the cross-relaxation matrices.     

Li[B(OCH2CF3)4]: Synthesis,Characterization and Electrochemical Application as a Conducting Salt for LiSB Batteries

A new Li salt with views to success in electrolytes is synthesized in excellent yields from lithium borohydride with excess 2,2,2‐trifluorethanol (HOTfe) in toluene and at least two equivalents of 1,2‐dimethoxyethane (DME). The salt Li[B(OTfe)₄] is obtained in multigram scale without impurities, as long as DME is present during the reaction. It is characterized by heteronuclear magnetic resonance and vibrational spectroscopy (IR and Raman), has high thermal stability (T_{decomposition}>271 °C, DSC) and shows long‐term stability in water. The concentration‐dependent electrical conductivity of Li[B(OTfe)₄] is measured in water, acetone, EC/DMC, EC/DMC/DME, ethyl acetate and THF at RT In DME (0.8 mol L ^?1) it is 3.9 mS cm^?1, which is satisfactory for the use in lithium‐sulfur batteries (LiSB). Cyclic voltammetry confirms the electrochemical stability of Li[B(OTfe)₄] in a potential range of 0 to 4.8 V vs. Li/Li⁺. The performance of Li[B(OTfe)₄] as conducting salt in a 0.2 mol L ^?1 solution in 1:1 wt % DME/DOL is investigated in LiSB test cells. After the 40th cycle, 86 % of the capacity remains, with a coulombic efficiency of around 97 % for each cycle. This indicates a considerable performance improvement for LiSB, if compared to the standard Li[NTf₂]/DOL/DME electrolyte system.     

Temperature dependence of the 1J(11B19F) spin–spin coupling in BF3 molecule

The ¹J(¹¹B¹⁹F) spin–spin coupling of gaseous BF₃ was observed in ¹¹B NMR spectra as a function of density in a wide range of temperatures. Following the extrapolation of the measured values to the zero‐density limit, the coupling constant free from intermolecular effects ¹J₀(¹¹B¹⁹F) was obtained for each temperature. In contrast to previous investigations, the final results indicate a nonlinear dependence of ¹J₀(¹¹B¹⁹F) on temperature. In the corresponding ab initio calculations of spin–spin coupling constants performed at the coupled cluster singles and doubles (CCSD) level to obtain a reliable result for this coupling constant we had to take into account large vibrational corrections. Copyright © 2009 John Wiley & Sons, Ltd.     

Linear free energy relationship correlations for the solubilising characterisation of room temperature ionic liquids containing 1-hexyloxymethyl-3-methylimidazolium and 1,3-dihexyloxymethylimidazolium cations

Gas-to-room temperature ionic liquid (RTIL) partition coefficients have been compiled from the published literature for solutes dissolved in 1-hexyloxymethyl-3-methylimidazolium bis(trifluoromethylsulphonyl)imide, {[HxomMIm]⁺[(Tf)₂N]^?}, and in 1,3-dihexyloxymethylimidazolium bis(trifluoromethylsulphonyl)imide, {[(Hxom)₂Im]⁺[(Tf)₂N]^?}. These partition coefficients are converted into water-to-RTIL partition coefficients using the corresponding gas-to-water partition coefficients. Both sets of partition coefficients are analysed using the Abraham model with cation-specific and anion-specific equation coefficients. The equation coefficients are reported for the 1-hexyloxymethyl-3-methylimidazolium and 1,3-dihexyloxymethylimidazolium cations. The calculated cation coefficients can be combined with our previously determined nine sets of anion-specific equation coefficients to yield expressions capable of predicting the partition coefficients of solutes in 18 different RTILs.     

Chemical and thermal stability of N‐heterocyclic ionic liquids in catalytic C–H activation reactions

¹H‐NMR spectrum analyses are applied to study the chemical and thermal stability of selected N‐heterocyclic ionic liquids within the reaction system that can highly efficiently activate a C–H bond of methane and convert it into the C–O bond in methanol. Our results indicate that under such reaction conditions involving using a powerful Pt‐based catalyst and strong acidic solvent, the aromatic ring of an imidazolium cation becomes unstable generating an ammonium ion (NH₄⁺). Our results also suggest that the instability of the imidazolium ring is more chemically (participation in reactions) than thermally based. Modifications of the aromatic ring structure such as pyrazolium and triazolium cations can increase the chemical/thermal stability of ionic liquids under these reaction conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

A kinetic study of the reaction between N,N-dimethyl-p-toluidine and its electrogenerated radical cation in a room temperature ionic liquid.

The reaction between N,N-dimethyl-p-toluidine (DMT) and the radical cation generated through its one-electron oxidation has been studied electrochemically in the room temperature ionic liquid N-methyl-N-butylpyrrolidinium bis(trifluoromethylsulfonyl)imide, [Py14][NTf2]. Kinetic information obtained as linear sweep and cyclic voltammetry collected at 5 microm, 10 microm and 0.3 mm diameter platinum disk electrodes over a range of initial substrate concentrations and scan rates spanning five orders of magnitude was complemented by chronoamperometric measurements designed to probe the rate of diffusion. At the fastest scan rates the homogeneous reactions following the initial electron transfer were effectively out-run, facilitating an assessment of the electrode kinetics using DIGISIM and a validated Nicholson's method. Through digital simulation the voltammetry was then shown to be consistent with a mechanism established for the same reaction in acetonitrile, involving dimerisation of the DMT radicals following an initial and rate-determining proton transfer step. After careful consideration of all parameters, a bimolecular rate constant of (3.4 +/- 1.1) x 10(2) dm3 mol(-1) s(-1) was deduced by fitting the data. This was compared to the equivalent value for acetonitrile and, in light of this, the implications on the viability of ionic liquids for use as alternative mainstream solvents briefly assessed.     

Synthesis of room-temperature ionic liquids with the weakly coordinating [Al(ORF)4]- anion (RF=C(H)(CF3)2) and the determination of their principal physical properties

A large series of ionic liquids (ILs) based on the weakly coordinating alkoxyaluminate [Al(hfip)(4)](-) (hfip: hexafluoroisopropoxy) with classical as well as functionalized cations were prepared, and their principal physical properties determined. Melting points are between 0 ([C(4)MMIM][Al(hfip)(4)]) and 69 °C ([C(3)MPip][Al(hfip)(4)]); three qualify as room-temperature ILs (RTILs). Crystal structures for six ILs were determined; their structural parameters and anion-cation contacts are compared here with known ILs, with a special focus on their influence on physical properties. Moreover, the biodegradability of the compounds was investigated by using the closed-bottle and the manometric respirometry test. Temperature-dependent viscosities and conductivities were measured between 0 and 80 °C, and described by either the Vogel-Fulcher-Tammann (VFT) or the Arrhenius equations. Moreover, conductivities and viscosities were investigated in the context of the molecular volume, V(m). Physical property-V(m) correlations were carried out for various temperatures, and the temperature dependence of the molecular volume was analyzed by using crystal structure data and DFT calculations. The IL ionicity was investigated by Walden plots; according to this analysis, [Al(hfip)(4)](-) ILs may be classified as "very good to good ILs"; while [C(2)MIM][Al(hfip)(4)] is a better IL than [C(2)MIM][NTf(2)]. The dielectric constants of ten [Al(hfip)(4)](-) ILs were determined, and are unexpectedly high (ε(r)=11.5 to 16.8). This could be rationalized by considering additional calculated dipole moments of the structures frozen in the solid state by DFT. The determination of hydrogen gas solubility in [Al(hfip)(4)](-) RTILs by high-pressure NMR spectroscopy revealed very high hydrogen solubilities at 25 °C and 1 atm. These results indicate the significant potential of this class of ILs in manifold applications.     

Fe3O4 Nanorods-RGO-ionic Liquid Nanocomposite Based Electrochemical Sensor for Aflatoxin B1 in Ground Paprika

A novel and sensitive method for the determination of aflatoxin B1 (AFA−B1) in ground paprika using a methyltrioctylammonium chloride ionic liquid (IL), iron oxide nanorods (Fe₃O₄ nanorods) and reduced graphene oxide (RGO) fabricated glassy carbon electrode (GCE) was developed. The synthesized nanoparticles, nanocomposites and modified electrode surfaces were characterized by Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), thermogravimetric analysis (TGA/DSC) and x-ray diffraction (XRD) analyses. Moreover, the electrochemical performance of the developed sensor was determined by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The obtained results demonstrate that the sensitivity of AFA−B1 is significantly enhanced on RGO-Fe₃O₄ nanorods-IL-GCE in comparison with bare GCE, RGO-GCE and RGO-Fe₃O₄ nanorods-GCE. The redox peak currents of AFA−B1 exhibited good linear relationship with its concentration in the range from 0.02 to 0.33 ng mL⁻¹ with detection limit of (LOD) 0.03 ng mL⁻¹ and limit of quantification (LOQ) 0.36 ng mL⁻¹ respectively (S/N=3). In addition, the fabricated electrode showed good stability and reproducibility. The proposed technique was effectively applied to identify the AFA−B1 in real ground paprika samples with acceptable results.     

酸性离子液体催化合成三吲哚甲烷化合物

在酸性离子液体催化下,通过吲哚及其衍生物和吲哚甲醛反应合成了一系列三吲哚甲烷化合物。[hmim]HSO₄/EtOH 对于该反应来说,是一个高效、绿色的催化体系。     

N(nPr)4[B5O6(OH)4][B(OH)3]2 and N(nBu)4[B5O6(OH)4][B(OH)3]2: Clathrates with a diamondoid arrangement of hydrogen-bonded pentaborate anions

Single-crystal X-ray structure analyses of N(nPr)₄[B₅O₆(OH)₄][B(OH)₃]₂,1, and N(nBu)₄ [B₅O₆(OH)₄][B(OH)₃]₂,2, reveal that these materials are novel clathrates, the isotypic host structures of which are three-dimensional assemblies of hydrogen-bonded [B₅O₆(OH)₄]^– ionsand B(OH)₃ molecules. The assembly of only the pentaborate anions is a distorted (i.e., along [102] elongated) fourconnected diamond-related network. The N(nPr) ₄ ⁺ and N(nBu) ₄ ⁺ ions are trapped within the complex three-dimensional channel systems of the host frameworks. Both1 and2 crystallize monoclinically with space groupP2₁/c andZ=4. The cell constants are:1:a=13.592(5),b=12.082(2),c=17.355(6) Å, =106.60(2)° (298K);2:a=13.874(3),b=12.585(1),c=17.588(4) Å, =107.04(1)° (238 K). The results obtained by both¹¹B and¹³C MAS NMR spectroscopy are discussed. Thermogravimetric studies under a flowing inert-gas atmosphere suggest that water, stemming from polycondensation of the hydrous borate species, is released from the clathrates at ca. 443 K (1) and 398 K (2) before the decomposition of the organic cations starts at ca. 603 K (1) and 603 K (2).Author for correspondence. Supplementary Data relating to this article are deposited with the British Library as supplementary publication No. SUP 82172 (82 pages).     

Cu(I)@Fe3O4 nanoparticles supported on imidazolium‐based ionic liquid‐grafted cellulose: Green and efficient nanocatalyst for multicomponent synthesis of N‐sulfonylamidines and N‐sulfonylacrylamidines

A novel heterogeneous nanocatalyst was fabricated by depositing copper iodide and Fe₃O₄ nanoparticles on imidazolium‐based ionic liquid‐grafted cellulose and successfully characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, powder X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry and flame atomic absorption spectrometry. It was employed to catalyse the reaction of terminal acetylenes with sulfonyl azides to afford highly reactive sulfonyl ketenimine intermediates which were subsequently trapped by secondary amines to give N ‐sulfonylamidines and N ‐sulfonylacrylamidines under solvent‐free conditions at room temperature. Good to excellent yields, very short reaction times, eco‐friendly processing, easy separation and reusability without significant loss of catalytic activity were found to be the notable features of this synthetic protocol.