二茂铁及其衍生物的合成与应用研究进展

近年来二茂铁及其衍生物的合成与应用研究是金属有机化学研究的热点.本文不仅对二茂铁及其衍生物的性质、合成及其应用研究现状作了归纳和评述,而且简要概括了二茂铁及其衍生物的未来研究方向.     

开环聚合制备高分子量聚二茂铁衍生物及其性能的研究

综述了近年来国内外高分子量聚二茂铁衍生物的研究进展。对热引发、阴离子引发、过渡金属催化等开环聚合方法及机理以及聚合物结构、性能及潜在应用作了介绍。     

二茂铁及其衍生物作为电化学传感器的研究进展

本文对近二十年来国内外对二茂铁及其衍生物作为电化学传感器的研究进展做了较全面的综述。主要讨论了二茂铁及其衍生物修饰电极的制备、表征,介绍了二茂铁及其衍生物作为电化学传感器的应用情况,并探讨了今后的研究方向。     

可溶性聚3-[(二茂铁甲酸乙酯)三乙氧基]氧基噻吩的合成与性质表征

采用化学聚合方法合成了一种含二茂铁电活性基团的新型导电聚噻吩衍生物聚3-[(二茂铁甲酸乙酯)三乙氧基]氧基噻吩, 用1H NMR和红外光谱等方法对其结构进行了表征. 实验结果表明, 该聚合物可溶于三氯甲烷、四氢呋喃和丙酮等有机溶剂, 并且二茂铁在聚合物中依然保持良好的氧化还原活性, 对钠离子具有良好的选择性络合作用.     

二茂铁酰基衍生物的研究进展

综述了近年来二茂铁酰基衍生物如二茂铁甲醛、二茂铁酮和二茂铁甲酸的合成及反应的研究进展，简要介绍了它在生物学、医学和电化学等领域的应用。参考文献７３篇。     

一类二茂铁衍生物的合成及其对铬离子和铜离子的特异性识别研究

以二茂铁甲醛、1,1'-二茂铁二甲醛、2,6-二氨基吡啶、2-氨基-7-甲基-1,8-萘啶等为原料合成了二茂铁单臂和双臂衍生物Fe L1~Fe L4,并通过核磁共振氢谱、碳谱、质谱和元素分析等对衍生物的结构进行了表征和鉴定,同时用循环伏安法研究了四种衍生物的电化学性质.通过紫外可见分光光度法和核磁滴定,研究了四种衍生物与金属离子的相互作用.结果表明,二茂铁吡啶衍生物Fe L1和Fe L2能够在15种混合金属离子中特异性识别铜离子和铬离子,二茂铁萘啶衍生物Fe L3和Fe L4能够在15种混合金属离子中特异性识别铬离子,这种方法在体外环境污染监测和体内金属离子超标检测中都具有潜在的应用.     

1，1’-二茂铁二甲醛的合成研究

半个世纪以来，由于二茂铁及其衍生物表现出特有的芳香性、稳定性、氧化还原性及生物活性等，使得它们在材料、航天、医疗等领域得到了广泛的应用。醛基取代二茂铁衍生物是其中的重要一种，除了具有二茂铁的特性外，还具有醛基的还原性以及羰基和Cp环的共轭特征，使其成为重要的中间体或起始原料，例如：Wright课题组首次合成了主链含二茂铁的二阶非线形金属有机聚合物，     

N-(酰基二茂铁)苯并咪唑类化合物的合成和表征

将二茂铁磺酰氯或二茂铁甲酰氯和1H-苯并咪唑衍生物反应,合成了12个未见文献报道的N-(酰基二茂铁)苯并咪唑类化合物,用IR、1HNMR、元素分析和MS对其结构进行了表征。结果表明,含有活泼氢的苯并咪唑衍生物能与二茂铁酰氯生成相应的N-(酰基二茂铁)苯并咪唑衍生物,并有较好的收率。     

由季铵盐合成有机胂二茂铁衍生物

由季铵盐合成有机胂二茂铁衍生物杜洪光,师树简（北京化工大学应用化学系,北京,１０００２９）关键词有机胂,二茂铁衍生物,铵甲碘化物,亲核取代关于二茂铁季铵盐的亲核取代反应已有较多报道［１～４］,但对于含胂二茂铁季铵盐的这类反应还未见诸文献,由碘化［２－...     

胺烷基二茂铁衍生物的合成方法

胺烷基二茂铁衍生物由于在有机合成中的特殊用途而受到化学家们的重视，成为二茂铁衍生物中的一个重要研究领域。本文介绍从不同起始原料出发，合成胺烷基二茂铁衍生物的方法。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.