Warm white light from Y4MgSi3O13:Bi, Eu nanophosphor for white light-emitting diodes

Y₄MgSi₃O₁₃:Bi³⁺, Eu³⁺ nanophosphors have been prepared by a facile sol–gel method. The products have been characterized by X-ray diffraction, field-emission scanning electron microscopy and fluorescence measurements. The results show that the nanophosphors are of single phase hexagonal Y₄MgSi₃O₁₃ with size-distribution of 50–90 nm in diameter. White-light emission has been obtained from Bi³⁺ and Eu³⁺ co-doped Y₄MgSi₃O₁₃ nanophosphors upon excitation of 350 nm ultraviolet light. It is noted that Bi³⁺ ions can occupy two different Y³⁺ sites and generate different emissions from the ³p₁ → ¹s₀ transition. Warm white light has been obtained from Y₄MgSi₃O₁₃:Bi³⁺, Eu³⁺ nanophosphors according to Commission International de I’Eclairage (CIE) chromaticity coordinates and color temperature (T_c) with appropriately adjusted contents of Bi³⁺ and Eu³⁺. The results indicate that Y₄MgSi₃O₁₃:0.08Bi³⁺, 0.04Eu³⁺ (x = 0.31, y = 0.31, T_c = 6907 K) are potential nanophosphors for white light-emitting diodes (LEDs) applications.     

Thermo-Raman spectroscopy in situ monitoring study of solid-state synthesis of NiO-Al2O3 nanoparticles and its characterization

Hyphenation of thermogravimetric analyzer (TGA) and thermo-Raman spectrophotometer for in situ monitoring of solid-state reaction in oxygen atmosphere forming NiO-Al₂O₃ catalyst nanoparticles is investigated. In situ thermo-Raman spectra in the range from 200 to 1400 cm⁻¹ were recorded at every degree interval from 25 to 800 °C. Thermo-Raman spectroscopic studies reveal that, although the onset of formation is around 600 °C, the bulk NiAl₂O₄ forms at temperatures above 800 °C. The X-ray diffraction (XRD) spectra and the scanning electron microscopy (SEM) images of the reaction mixtures were recorded at regular temperature intervals of 100 °C, in the temperature range from 400 to 1000 °C, which could provide information on structural and morphological evolution of NiO-Al₂O₃. Slow controlled heating of the sample enabled better control over morphology and particle size distribution (∼20-30 nm diameter). The observed results were supported by complementary characterizations using TGA, XRD, SEM, transmission electron microscopy, and energy dispersive X-ray analysis.     

Y2O3:Eu (5 mol%) with Ag nanoparticles prepared by citrate precursor

Y₂O₃:Eu³⁺ (5 mol% Eu³⁺) and Y₂O₃:Eu³⁺ (5 mol% Eu³⁺) containing 1 mol% of Ag nanoparticles were prepared by heat treatment of a viscous resin obtained via citrate precursor. TEM and EDS analyses showed that Y₂O₃:Eu³⁺ (5 mol% Eu³⁺) is formed by nanoparticles with an average size of 12 nm, which increases to 30 nm when Ag is present because the effect of metal induced crystallization occurs. Ag nanoparticles with a size of 9 nm dispersed in Y₂O₃:Eu³⁺ (5 mol% Eu³⁺) were obtained and the surface plasmon effect on Ag nanoparticles was observed. The emission around 612 nm assigned to the Eu³⁺ (⁵D₀→⁷F₂) transition enhanced when the Ag nanoparticles were present in the Y₂O₃:Eu³⁺ luminescent material.     

Visible and infrared luminescence properties of Er-doped Y2Ti2O7 nanocrystals

Er³⁺-doped Y₂Ti₂O₇ nanocrystals were fabricated by the sol-gel method. While the annealing temperature exceeds 757 °C, amorphous pyrochlore phase Er_xY_2−xTi₂O₇ transfers to well-crystallized nanocrystals, and the average crystal size increases from ∼70 to ∼180 nm under 800-1000 °C/1 h annealing. Er_xY_2−xTi₂O₇ nanocrystals absorbing 980 nm photons can produce the upconversion (526, 547, and 660 nm; ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2, and ⁴F_9/2→⁴I_15/2, respectively) and Stokes (1528 nm; ⁴I_13/2→⁴I_15/2) photoluminescence (PL). The infrared PL decay curve is single-exponential for Er³⁺ (5 mol%)-doped Y₂Ti₂O₇ nanocrystals but slightly nonexponential for Er³⁺ (10 mol%)-doped Y₂Ti₂O₇ nanocrystals. For 5 and 10 mol% doping concentrations, the mechanism of up-converted green light is the two-photon excited-state absorption. Much stronger intensity of red light relative to green light was observed for the sample with 10 mol% dopant. This phenomenon can be attributed to the reduced distance between Er³⁺-Er³⁺ ions, resulting in the enhancement of the energy-transfer upconversion and cross-relaxation mechanisms.     

Synthesis of nano-sized crystalline oxide ion conducting fluorite-type Y2O3-doped CeO2 using perovskite-like BaCe0.9Y0.1O2.95 (BCY) and study of CO2 capture properties of BCY

Formation of nano-sized Y₂O₃-doped CeO₂ (YCO) was observed in the chemical reaction between proton conducting Y₂O₃-doped BaCeO₃ (BCY) and CO₂ in the temperature range 700-1000 °C, which is generally prepared by wet-chemical methods that include sol-gel, hydrothermal, polymerization, combustion, and precipitation reactions. BCY can capture CO₂ of 0.13 g per ceramic gram at 700 °C, which is comparable to that of the well-known Li₂ZrO₃ (0.15 g per ceramic gram at 600 °C). Powder X-ray diffraction (PXRD), energy dispersive X-ray analysis (EDX), laser particle size analysis (LPSA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and ac impedance spectroscopy were employed to characterize the reaction product obtained from reaction between BCY and CO₂ and subsequent acid washing. PXRD study reveals presence of fluorite-like CeO₂ (a=5.410 (1) Å) structure and BaCO₃ in reaction products. TEM investigation of the acid washed product showed the formation of nano-sized material with particle sizes of about 50 nm. The electrical conductivity of acid washed product (YCO) in air was found to be about an order higher than the undoped CeO₂ reported in the literature.     

Synthesis of SiO2/Y2O3:Eu core-shell materials and hollow spheres

The SiO₂/Y₂O₃:Eu core-shell materials and hollow spheres were first synthesized by a template-mediated method. X-ray diffraction patterns indicated that the broadened diffraction peaks result from nanocrystals of Y₂O₃:Eu shells and hollow spheres. X-ray photoelectron spectra showed that the Y₂O₃:Eu shells are linked with silica cores by Si-O-Y chemical bond. SEM and TEM observations showed that the size of SiO₂/Y₂O₃:Eu core-shell structure is in the range of 140-180 nm, and the thickness of Y₂O₃:Eu hollow spherical shell is about 20-40 nm. The photoluminescence spectra of SiO₂/Y₂O₃:Eu core-shell materials and Y₂O₃:Eu hollow spheres have better red luminescent properties, and the broadened emission bands came from the size effects of nanocrystals composed of Y₂O₃:Eu shell.     

Optical properties of (Y1−xTmx)3GaO6 and subsolidus phase relation of Y2O3-Ga2O3-Tm2O3

A serial of samples in Y₂O₃-Ga₂O₃-Tm₂O₃ pseudo-ternary system are prepared by solid-state chemical reaction method. The range of solid solution in (Y_1−xTm_x)₃GaO₆ is 0<x<0.384. Powder X-ray diffraction shows that the compounds crystallize in Gd₃GaO₆ (Cmc2₁)-type structure. The solid solubilities of Y_3+xGa_5−xO₁₂ (x=0-0.77) and Tm_3+xGa_5−xO₁₂ (x=0-0.62) are 37.5-47.11 at% Y₂O₃, and 37.5-45.26 at% Tm₂O₃, respectively. PL spectra of Tm-doped Y₃GaO₆ show that there is a sharp blue emission at ∼456 nm from the ¹D₂→³F₄ transition at room temperatures with two lifetimes (∼5 and ∼15 μs) and a narrow saturation range of PL intensity for the Tm³⁺ content from x=0.005 to 0.03. The sharp emission and long lifetime of (Y_1−xTm_x)₃GaO₆ indicate that Y₃GaO₆ is a potential phosphor and laser crystal host material.     

Synthesis and characteristic of the Fe3O4@SiO2@Eu(DBM)3·2H2O/SiO2 luminomagnetic microspheres with core-shell structure

The core-shell structured luminomagnetic microsphere composed of a Fe₃O₄ magnetic core and a continuous SiO₂ nanoshell doped with Eu(DBM)₃·2H₂O fluorescent molecules was fabricated by a modified Stöber method combined with a layer-by-layer assembly technique. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), confocal microscopy, photoluminescence (PL), and superconducting quantum interface device (SQUID) were employed to characterize the Fe₃O₄@SiO₂@Eu(DBM)₃·2H₂O/SiO₂ microspheres. The experimental results show that the microshpere has a typical diameter of ca. 500 nm consisting of the magnetic core with about 340 nm in diameter and silica shell doped with europium complex with an average thickness of about 80 nm. It possesses magnetism with a saturation magnetization of 25.84 emu/g and negligible coercivity and remanence at room temperature and exhibits strong red emission peak originating from electric-dipole transition ⁵D₀ → ⁷F₂ (611 nm) of Eu³⁺ ions. The luminomagnetic microspheres can be uptaken by HeLa cells and there is no adverse cell reaction. These results suggest that the luminomagnetic microspheres with magnetic resonance response and fluorescence probe property may be useful in biomedical imaging and diagnostic applications.     

Enhanced ultraviolet up-conversion emissions of Tm/Yb codoped YF3 nanocrystals

Tm³⁺/Yb³⁺ codoped rod-like YF₃ nanocrystals were synthesized through a facile hydrothermal method. After annealing in an argon atmosphere, the nanocrystals emitted bright blue and intense ultraviolet (UV) light under a 980-nm continuous wave diode laser excitation. Up-conversion emissions centered at ∼291 nm (¹I₆ → ³H₆), ∼347 nm (¹I₆ → ³F₄), ∼362 nm (¹D₂ → ³H₆), ∼452 nm (¹D₂ → ³F₄), ∼476 nm (¹G₄ → ³H₆), ∼642 nm (¹G₄ → ³F₄), and ∼805 nm (³H₄ → ³H₆) were recorded using a fluorescence spectrophotometer. Especially, enhanced UV emissions were studied by changing Yb³⁺/Tm³⁺ doping concentrations, the annealing temperatures, and the excitation power densities. A possible mechanism, energy transfer-cross relaxation-energy transfer (ET-CR-ET), was proposed based on a simple rate-equation model to elucidate the process of the enhanced UV emissions.     

Synthesis and photoluminescence of Eu-doped Y2Sn2O7 nanocrystals

A facile CTAB-assisted sol-gel route has been successfully established to synthesize Y₂Sn₂O₇ nanocrystals with pyrochlore structure. The route involves first the formation of CTAB-inorganics mesostructures as precursors and then their thermal decomposition to yield the final product. Well-crystallized and phase-pure Y₂Sn₂O₇ particles of ∼40 nm in size can be readily obtained at 600°C, a temperature much lower than that of the conventional solid-state method. Furthermore, photoluminescence characterization of the Y₂Sn₂O₇ nanocrystals doped with 5 mol% Eu³⁺ was carried out and the results show that the as-synthesized material display intense and prevailing emission at 589 nm belonging to the magnetic dipole transition.     

Hydrothermal synthesis and luminescent properties of LuBO3:Tb microflowers

Hexagonal vaterite-type LuBO₃:Tb³⁺ microflower-like phosphors have been successfully prepared by an efficient surfactant- and template-free hydrothermal process directly without further sintering treatment. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectrometry, transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL) and cathodoluminescence (CL) spectra as well as kinetic decays were used to characterize the samples. The as-obtained phosphor samples present flowerlike agglomerates composed of nanoflakes with thickness of 40 nm and high crystallinity in spite of the moderate reaction temperature of 200 °C. The reaction mechanism has been considered as a dissolution/precipitation mechanism; the self-assembly evolution process has been proposed on homocentric layer-by-layer growth style. Under ultraviolet excitation into the 4f⁸→4f⁷5d transition of Tb³⁺ at 248 nm (or 288 nm) and low-voltage electron beam excitation, LuBO₃:Tb³⁺ samples show the characteristic green emission of Tb³⁺ corresponding to ⁵D₄→⁷F_{6, 5, 4, 3} transitions with the ⁵D₄→⁷F₅ transition (542 nm) being the most prominent group, which have potential applications in fluorescent lamps and field emission displays.     

Synthesis and characterization of poly(3-thiophene acetic acid)/Fe3O4 nanocomposite

Poly(3-thiophene acetic acid)/Fe₃O₄ nanocomposite is synthesized by the precipitation of Fe₃O₄ in the presence of poly(3-thiophene acetic acid) (P3TAA). Structural, surface, morphological, thermal properties and conductivity characterization/evaluation of the nanocomposite were performed by XRD, FT-IR, TEM, TGA, and conductivity measurements, respectively. The capping of P3TAA around Fe₃O₄ nanoparticles was confirmed by FT-IR spectroscopy, the interaction being via bridging oxygens of the carboxylate and the nanoparticle surface through bidentate binding. The crystallite and particle size were obtained as 9 ± 2 nm and 11 ± 1 nm from XRD line profile fitting and TEM image analysis, respectively, which reveal nearly single crystalline nature of Fe₃O₄ nanoparticles. Magnetization measurements reveal that P3TAA coated magnetite particles do not saturate at higher fields. There is no coercivity and remanence revealing superparamagnetic character. Magnetic particle size calculated from the theoretical fitting as 9.1 nm which coincides the values determined from TEM micrographs and XRD line profile fitting. The comparison to the TEM particle size reveals slightly modified magnetically dead nanoparticle surface.     

A simple route to synthesize nanocrystalline nickel ferrite (NiFe2O4) in the presence of octanoic acid as a surfactant

Nanocrystalline nickel ferrite (NiFe₂O₄) powder was prepared by a co-precipitation method from Ni and Fe chlorides. The as-prepared samples were characterized by powder X-ray diffractometry (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and vibrating sample magnetometry (VSM). SEM and TEM indicated that the particles were spherical with particle sizes in the range 25 ± 5 nm. The magnetic properties of the sample were measured by using a vibrating sample magnetometer, which showed that the sample exhibited typical ferromagnetic behavior at room temperature, while a finite coercivity of 245.5 Oe was present at 300 K. The saturation magnetization of the sample (23.13 emu/g) was significantly lower than that for the reported multidomain bulk particles (55 emu/g), reflecting the ultrafine nature of the sample.     

Hydrothermal synthesis of cobalt carbonates using different counter ions: An efficient precursor to nano-sized cobalt oxide (Co3O4)

Synthesis of submicrometer crystalline particles of cobalt carbonate was achieved hydrothermally using different cobalt salts and urea with a molar ratio from 1:3 to 1:20 (cobalt salt:urea) in aqueous solutions at 160 °C for 24-36 h, in the presence of cetyltrimethylammonium bromide (CTAB) as a surfactant. Nanoparticles of Co₃O₄, with an average size from 30 to 39 nm, were obtained by thermal decomposition of CoCO₃ samples at 500 °C for 3 h in an electrical furnace. The as-synthesized products were characterized by powder X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), UV-Vis spectra and thermal analysis. Studying the optical properties of the as-prepared cobalt oxide nanoparticles showed the presence of two band gaps, the values of which confirmed the semiconducting properties of the prepared Co₃O₄.     

Synthesis and spectral properties of Eu-doped YF3 nanobundles

YF₃:Eu³⁺ nanobundles were synthesized by a facile microemulsion method. Analysis of X-ray diffraction, scanning electron microscope, and transmission electron microscopy reveals that each nanobundle consists of numerous nanowhiskers with a mean length of ∼500 nm and a mean diameter of ∼2 nm. Under 393-nm excitation, the luminescence was dominated by ⁵D₀ → ⁷F₁ transition, indicating the inversion symmetry of Eu³⁺ site. The luminescence intensity increased with increasing Eu³⁺ concentration, up to about 30 mol%, and then decreased abruptly. The peak positions and spectral shapes of emissions were independent of Eu³⁺ concentration. Finally, the critical distance of energy transfer was calculated.     

Synthesis and characterization of Zn1−xNixFe2O4 spinels prepared by a citrate precursor

Nanocrystalline single-phase samples of Zn_1−xNi_xFe₂O₄ ferrites (0<x<1) have been obtained via a soft-chemistry method based on citrate-ethylene glycol precursors, at a relatively low temperature (650 °C). The influence of the nickel and zinc contents as well as that of heat treatments were investigated by means of X-ray powder diffraction, Brunauer-Emmett-Teller (BET) surface area, scanning electron microscopy (SEM) and Fourier Transform Infrared (FTIR) Spectroscopy. Higher Ni content increases the surface areas, the largest one (∼20 m²/g) being obtained for NiFe₂O₄ annealed at 650 °C for 15 h. For all compositions, the surface area decreases for prolonged annealing at 650 °C and for higher annealing temperatures. Those results were correlated to the particle size evolution; the smallest particles (∼50 nm) observed in the NiFe₂O₄ sample (650 °C, 15 h) steadily increase as Ni ions were replaced by Zn, reaching ∼100 nm in the ZnFe₂O₄ sample (650 °C, 15 h). For all the Zn_1−xNi_xFe₂O₄ samples and, whatever the heat treatments was, the FTIR spectra show two fundamental absorption bands in the range 650-400 cm⁻¹, characteristics of metal vibrations, without any superstructure stating for cation ordering. The highest ν₁-tetrahedral stretching, observed at ∼615 cm⁻¹ in NiFe₂O₄, shifts towards lower values with increasing Zn, whereas the ν₂-octahedral vibration, observed at 408 cm⁻¹ in NiFe₂O₄, moves towards higher wavenumbers, reaching 453 cm⁻¹ in ZnFe₂O₄.     

One-dimensional GdVO4:Ln (Ln=Eu, Dy, Sm) nanofibers: Electrospinning preparation and luminescence properties

One-dimensional GdVO₄:Ln³⁺ (Ln=Eu, Dy, Sm) nanofibers have been prepared by a combination method of sol-gel process and electrospinning technology. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric and differential thermal analysis (TG-DTA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), photoluminescence (PL), quantum efficiency (QE), and cathodoluminescence (CL) spectra as well as kinetic decays were used to characterize the samples. The XRD, FT-IR, and TG-DTA results show that GdVO₄:Ln³⁺ nanofibers samples crystallize at 700 °C. SEM images indicate that the as prepared precursor fibers are smooth. After being calcined at 700 °C for 4 h, the fibers still maintain their fiberlike morphology with rough surface. TEM image further manifests that the GdVO₄:Ln³⁺ nanofibers consist of nanoparticles. Under ultraviolet excitation and low-voltage electron beam excitation, GdVO₄:Ln³⁺ phosphors showed their strong characteristic emission due to an efficient energy transfer from vanadate groups to dopants. The optimum doping concentration of Ln³⁺ in the GdVO₄ nanofibers also has been investigated.     

Microstructure and electrical transport in nano-grain sized Ce0.9Gd0.1O2−δ ceramics

An enhancement of the electrical conductivity has been found in nano-grain sized Ce_0.9Gd_0.1O_2−δ ceramics when measured in N₂ (p_O2=3.5×10⁻⁶ atm) in comparison with the most commonly accepted values of bulk ionic conductivity. We first present the synthesis and characterisation of the nanoparticles later used for the preparation of dense nanoceramics of Gd-doped CeO₂. The nanoparticles were characterised by X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy (TEM). The good sintering properties of these nanopowders allowed us to obtain very dense ceramics (>90% theoretical density) while keeping the grain size close to 100 nm. The microstructure of these nanoceramics was analysed by AFM and scanning electron microscopy (SEM) while the electrical characterisation was performed by the 4-point dc technique between 500 and 950 °C in air or N₂ and ac impedance between 150 and 400 °C in air and or argon. We briefly discuss the possibilities of electron vs. oxygen ion conduction and grain boundary vs. bulk conductivity. The features exhibited by these ceramics represent an increased potential to process solid electroceramics materials with specific levels of electronic and/or ionic conductivities for a variety of electrochemical devices.     

Synthesis and characterization of poly(3-thiophenyl acetic acid) (P3TAA)-BaFe12O19 nanocomposite

We have presented a method for the fabrication of poly(3-thiophenyl acetic acid) (P3TAA)-BaFe₁₂O₁₉ nanocomposites by the in situ polymerization of P3TAA in the presence of synthesized BaFe₁₂O₁₉ nanoparticles. The nanoparticles and the nanocomposite were analyzed by XRD, FTIR, TGA, TEM, VSM and conductivity techniques for structural and physicochemical characteristics. Crystallographic analysis revealed the phase as hexaferrite and X-ray line profile fitting yielded a crystallite size of 32 nm. The particles, observed by TEM, exhibit irregular shapes and sizes between 100 and 500 nm, revealing polycrystalline character when compared with the crystallite size from XRD. FTIR and TGA analysis results show that P3TAA is conjugated to the particle surface via a carboxylate group and that the composite has a polymer content of ∼10%. Magnetic hysteresis curves do not saturate at high fields, which is a characteristic feature of fine particle systems with grain sizes smaller than 1 μm. Conductivity measurements showed a semiconductor character of the nanocomposite.     

Synthesis, vacuum ultraviolet and near ultraviolet-excited luminescent properties of GdCaAl3O7: RE (RE=Eu, Tb)

Vacuum ultraviolet (VUV) excitation and photoluminescent (PL) properties of Eu³⁺ and Tb³⁺ ion-doped aluminate phosphors, GdCaAl₃O₇:Eu³⁺ and GdCaAl₃O₇:Tb³⁺ have been investigated. X-ray diffraction (XRD) patterns indicate that the phosphor GdCaAl₃O₇ forms without impurity phase at 900 °C. Field emission scanning electron microscopy (FE-SEM) images show that the particle size of the phosphor is less than 3 μm. Upon excitation with VUV irradiation, the phosphors show a strong emission at around 619 nm corresponding to the forced electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺, and at around 545 nm corresponding to the ⁵D₄→⁷F₅ transition of Tb³⁺. The results reveal that both GdCaAl₃O₇:RE³⁺ (RE=Eu, Tb) are potential candidates as red and green phosphors, respectively, for use in plasma display panel (PDP).