Use of water in aiding olefin/paraffin (liquid + liquid) extraction via complexation with a silver bis(trifluoromethylsulfonyl)imide salt

This paper describes the extraction of C₅–C₈ linear α-olefins from olefin/paraffin mixtures of the same carbon number via a reversible complexation with a silver salt (silver bis(trifluoromethylsulfonyl)imide, Ag[Tf₂N]) to form room temperature ionic liquids [Ag(olefin)_x][Tf₂N]. From the experimental (liquid + liquid) equilibrium data for the olefin/paraffin mixtures and Ag[Tf₂N], 1-pentene showed the best separation performance while C₇ and C₈ olefins could only be separated from the corresponding mixtures on addition of water which also improves the selectivity at lower carbon numbers like the C₅ and C₆, for example. Using infrared and Raman spectroscopy of the complex and Ag[Tf₂N] saturated by olefin, the mechanism of the extraction was found to be based on both chemical complexation and the physical solubility of the olefin in the ionic liquid ([Ag(olefin)_x][Tf₂N]). These experiments further support the use of such extraction techniques for the separation of olefins from paraffins.     

Ternary Ag/Polyaniline/Au nanocomposites: Preparation,characterization and electrochemical properties

Ternary Ag/Polyaniline/Au nanocomposites were synthesized successfully by immobilizing of Au nanoparticles (NPs) on the surface of Ag/Polyaniline (PANI) nanocomposites. Ag/PANI nanocomposites were prepared via in situ chemical polymerization of aniline in the presence of 4-aminothiophenol (4-ATP) capped silver colloidal NPs. Then, uniform gold (Au) NPs were assembled on the surface of resulted Ag/PANI nanocomposites through electrostatic interaction to get Ag/Polyaniline/Au nanocomposites. The nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), ultraviolet visible spectroscopy (UV-Vis), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). Moreover, Ag/PANI/Au nanocomposites were immobilized on the surface of a glassy carbon electrode and showed enhanced electrocatalytic activity for the reduction of H₂O₂ compared with Ag/PANI.     

Synthesis of Ag Nanoparticle Doped MnO2/GO Nanocomposites at a Gas/Liquid Interface and its Application in H2O2 Detection

Ag/MnO₂/GO nanocomposites were synthesized via the method of gas/liquid interface based on silver mirror reaction, and a non‐enzymatic H₂O₂ sensor was fabricated through immobilizing Ag/MnO₂/GO nanocomposites on GCE. The composition and morphology of the nanocomposites were studied by energy‐dispersive X‐ray spectroscopy (EDS), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). Electrochemical investigation indicated that it exhibited a favorable performance for the H₂O₂ detection. Its linear detection range was from 3 μM to 7 mM with a correlation coefficient of 0.9960; the sensitivity was 105.40 μA mM^?1 cm^?2 and the detection limit was estimated to be 0.7 μM at a signal‐to‐noise ratio of 3.     

Ceric ammonium nitrate (CAN) as oxidizing or nitrating reagent for organic reactions in ionic liquids

The reaction of ceric ammonium nitrate, (NH₄)₂[Ce(NO₃)₆] or CAN, with naphthalene and 2-methylnaphthalene in the ionic liquid 1-ethyl-3-methylimidazolium triflate showed that the reaction products are strongly dependent on the water content of the ionic liquid and that cerium(IV) in the ionic liquid can electrochemically be regenerated.     

Synthesis of Silver Selenide Bicomponent Nanoparticles by a Novel Technique: Laser–Solid–Liquid Ablation

A novel laser–solid–liquid ablation technique has been developed to synthesize Ag₂Se nanoparticles from silver nitrate and selenium powder in a mixed solvent of 2-propanol and ethylenediamine. The products were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). The XRD indicated that the products were the single phase of silver selenide. The TEM images revealed that the as-prepared Ag₂Se grains were homogeneous and spherical, and their average size was about 30 nm. This novel technique can be extended to prepare other nanoparticles of various compositions.     

Synthesis and Crystal Structure of a New Silver(I) Complex

The reaction of 4-amino-6-methyl-1,2,4-triazine-3(2 H)-thione-5-one (AMTTO) with silver(I) nitrate in methanol gives the complex [Ag(AMTTO)₂]NO₃ ( 1 ). 1 was characterized by IR and ¹³C NMR spectroscopy and by an X-ray structure analysis [space group C2/c, Z = 4, lattice dimensions at –80 °C: a = 1306.7(2), b = 1139.0(2), c = 1089.2(1) pm, β = 94.54(1)°, R₁ = 0.0294]. The cation possesses a highly distorted linear coordination sphere in the solid state.     

酸功能化-温控型三元杂多酸离子液体的合成、表征及其酯催化性能

采用酸化-乙醚萃取法制备了不同钒取代数目的 Keggin结构的磷钨钒杂多酸,并进一步通过离子交换法合成了磺酸功能化的杂多酸离子液体催化剂,采用核磁、元素分析、红外、紫外、X射线衍射、热重-差示扫描、电位滴定等分析手段对所得样品进行了表征,考察了所得样品对氯乙酸和正戊醇的酯化反应性能和重复使用性能。结果表明,所制备的杂多酸离子液体是一种具有温度响应特性的无定型结构化合物,仍保留Keggin结构和较高的酸强度,该催化剂在反应温度下与反应物形成一相,而反应结束温度降低后,催化剂和产物又形成两相,通过简单的倾倒法就可以快速分离催化剂和反应产物。与杂多酸以及未磺酸化的杂多酸离子液体相比,磺酸功能化的杂多酸离子液体具有更高的酯催化活性。在优化的反应条件下,[PyPS]4PW11VO40(PyPS为1-(3-磺酸基)丙基吡啶)对氯乙酸的转化率可达到97.6%,重复使用4次后转化率为91.9%,而催化剂的结构未有明显变化。     

A Coordination Polymer from HAMTTO with Silver(I) (HAMTTO = 4‐Amino‐6‐methyl‐1,2,4‐triazine‐3‐thione‐5‐one)

The reaction of 4‐amino‐6‐methyl‐1,2,4‐triazine‐3‐thione‐5‐one, HAMTTO, with silver (I) nitrate in methanol led under deprotonation to the polymeric compound [(AMTTO)Ag]_n. The coordination polymer {[Ag(HAMTTO)]ClO₄}_n ( 1 ) is synthesized from the reaction of the latter polymeric compound with perchloric acid. Both compounds were characterized by elemental analysis and IR spectroscopy. Single‐crystal X‐ray diffraction studies on compound 1 showed that HAMTTO acts as a bidentate ligand and chelates the silver atom via its hydrazine nitrogen atom and its sulfur atom. Crystal data for 1 at ?90 °C: space group P2₁, Z = 2, a = 629.3(1), b = 748.7(1), c = 1071.7(1) pm, β = 98.28(1)°, R₁ = 0.0533.     

Silver-coated TiO2 nanostructured anode materials for lithium ion batteries

Anatase TiO₂ nanoribbons/nanotubes (TiO₂-NRTs) have been synthesised successfully via a reflux method followed by drying in a vacuum oven, and then, silver-coated TiO₂ NRTs (Ag/TiO₂-NRTs) were prepared by coating silver particles onto the TiO₂-NRTs surface by the traditional silver mirror reaction. The physical properties of the synthesised products were examined in detail using X-ray diffraction, field emission gun scanning electron microscopy, energy-dispersive X-ray spectroscopy, and transmission electron microscopy, respectively. The results indicated that the Ag nanoparticles were uniformly deposited on the surface of the TiO₂ nanoribbons/nanotubes. The electrochemical properties were investigated by a variety of techniques. The rate capability and cycle durability for the Ag/TiO₂-NRTs were improved compared with TiO₂-NRTs. It is speculated that the Ag-coated TiO₂ nanoribbons/nanotubes are an effective anode candidate for lithium ion batteries.     

Seed‐Mediated Growth of Silver Nanocubes in Aqueous Solution with Tunable Size and Their Conversion to Au Nanocages with Efficient Photothermal Property

Two seed‐mediated approaches for the growth of silver nanocubes in aqueous solution have been developed. Addition of a silver‐seed solution to a mixture of cetyltrimethylammonium chloride (CTAC), silver trifluoroacetate, and ascorbic acid and heating the solution at 60 °C for 1.5 h produces uniform Ag nanocubes with tunable sizes from 23 to 60 nm by simply adjusting the volume of silver‐seed solution introduced. Alternatively, the silver‐seed solution can be injected into a mixture of cetyltrimethylammonium bromide (CTAB), silver nitrate, copper sulfate, and ascorbic acid and heated to 80 °C for 2 h to generate 46 nm silver nanocubes. Plate‐like Ag nanocrystals exposing {111} surfaces can be synthesized by reducing Ag(NH₃)₂⁺ with ascorbic acid in a CTAC solution. Relatively large Ag nanocubes were converted to cuboctahedral Au/Ag and Au nanocages and nanoframes with empty {111} faces through a galvanic replacement reaction. The nanocages showed a progressive plasmonic band red‐shift with increasing Au content. The nanocages exhibited high and stable photothermal efficiency with solution temperatures quickly reaching beyond 100 °C when irradiated with an 808 nm laser for large heat and water vapor generation.     

Effect of the polarity of silver nanoparticles induced by ionic liquids on facilitated transport for the separation of propylene/propane mixtures

The effect of ionic liquids on the formation of a partial positive charge on the surface of silver nanoparticle and its subsequent effect on facilitated olefin transport were investigated. Three different ionic liquids of 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM⁺BF₄⁻), 1-butyl-3-methylimidazolium triflate (BMIM⁺Tf⁻), and 1-butyl-3-methylimidazolium nitrate (BMIM⁺NO₃⁻) were employed to control the positive charge density of the surface of silver nanoparticles. The positive charge density of the silver nanoparticles, as characterized by the binding energy of the silver atom, was in the following order: BMIM⁺BF₄⁻/Ag ? BMIM⁺Tf⁻/Ag > BMIM⁺NO₃⁻/Ag. This order was consistent with the tendency of ionic liquids to form free ions. The best separation performance for the propylene/propane mixtures was a mixed gas selectivity of 17 and a permeance of 7 GPU through a composite membrane consisting of BMIM⁺BF₄⁻/Ag. A better separation performance for olefin/paraffin mixtures was observed with a higher positive charge density of the silver nanoparticles. It was therefore concluded that facilitated olefin transport was a direct consequence of the surface positive charge of the silver nanoparticles induced by ionic liquids.     

Polymerized ionic liquid-wrapped carbon nanotubes: The promising composites for direct electrochemistry and biosensing of redox protein

Polymerized ionic liquid-wrapped carbon nanotubes (PIL-CNTs) were firstly designed for direct electrochemistry and biosensing of redox proteins. The CNTs were coated successfully with polymerized ionic liquid (PIL) layer, as verified by transmission electron microscopy (TEM), thermogravimetric analysis (TGA) and Fourier transform infrared (FT-IR) spectroscopy. The PIL-CNTs were dispersed better in water and showed superior electrocatalysis toward O₂ and H₂O₂ comparing to pristine CNTs and the mixture of IL monomer and CNTs. With glucose oxidase (GOD) as a protein model, the direct electrochemistry of the redox protein was investigated on the PIL-CNTs modified glassy carbon (GC) electrode and excellent direct electrochemical performance of GOD molecules was observed. The proposed biosensor (GOD/PIL-CNTs/GC electrode) displayed good analytical performance for glucose with linear response up to 6 mM, response sensitivity of 0.853 μA mM⁻¹, good stability and selectivity.     

Preparation and characterization of Ag‐deposited aminosilane‐modified silicate by chemical reduction method

Nanocomposites based on silver (Ag) and organically modified silicate (Ormosil) were prepared by an in situ reduction method, in which silver nitrate, tetraethoxysilane and N‐[3‐(trimethoxysilyl)propyl]diethylenetriamine (ATS) acted as precursor, linker, and colloidal suspension stabilizer, respectively. The objective of the study was to produce silver nanoparticles through AgNO₃ chemical reduction in a continuous media, in which aminosilanes act as superficial modifiers of Ag nanoparticles, inhibiting their growth and preventing aggregation. The physical properties of the Ormosil/Ag composites were examined using NMR, electron spin resonance, scanning electron microscope, transmission electron microscope, and thermal gravimetric analysis spectroscopy, the results of which indicated that Ag was incorporated in the Ormosil matrix after impregnation. The Ag content and surface morphology of the Ormosil/Ag composites depended on the initial concentration of AgNO₃. The antibacterial effects of the Ormosil/Ag composites were assessed by the zone of inhibition and plate‐counting methods, and an excellent antibacterial performance was discovered. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Electroless deposition of metallic silver from a choline chloride-based ionic liquid: a study using acoustic impedance spectroscopy, SEM and atomic force microscopy

In this paper, we describe the first example of a sustained galvanic coating deposited on a surface from a non-aqueous liquid. We present the surface characterization of electroless silver deposits on copper substrates from a solution of Ag(+) ions in an ionic liquid based on a choline chloride (ChCl) eutectic. Through a study of these deposits and the mechanism of formation using acoustic impedance spectroscopy (QCM), probe microscopy (AFM) and electron microscopy (SEM/EDX), we demonstrate that sustained growth of the silver deposit is facilitated by the porous nature of the silver. This is in contrast to the dip-coating reaction of silver ions in aqueous media, where the reaction stops when surface coverage is reached. Electroless silver deposits of up to several microns have been obtained by dip coating in ionic liquids without the use of catalysts of strong inorganic acids.     

Electrochemical properties of the system of Ag—1-butyl-3-methylimidazolium bromide low-temperature ionic liquid—silver bromide

The methods of potentiometry, electrochemical impedance spectroscopy, cyclic voltammetry, and gravimetry were used to study the electrochemical behavior of a silver electrode in low-temperature ionic liquids of BMImBr and BMImBr—AgBr, and also the process of cathodic reduction of Ag(I) compounds out of a BMImBr—AgBr melt. It is shown that an AgBr film is formed on the silver surface and its properties are determined by the ionic liquid composition. It is found that the process of silver electrodeposition from a BMImBr—AgBr binary alloy occurs irreversibly, at a high current efficiency (up to 100%) and a good quality of the deposit at low current densities. At 70°C, the transfer coefficients of the cathodic process (α = 0.56 and 0.16) and diffusion coefficients (D _Ag(I) = 0.48 × 10⁻⁷ cm²/s and 3.3 × 10⁻⁷ cm²/s) of silver-containing ions are determined in ionic liquids with the AgBr concentration of 0.81 and 1.53 mol/kg BMImBr, accordingly.     

Novel method for the preparation of core-shell nanoparticles with movable Ag core and polystyrene loop shell

Core/shell nanoparticles with movable silver (Ag) core and polystyrene (PSt) shell (Ag@PSt nanoparticle) were successfully synthesized at room temperature and under ambient pressure via two steps: γ-irradiation and interfacial-initiated polymerization. Firstly, mono-dispersed Ag nanoparticles with diameters 20 nm were synthesized in inversed microemulsion by reducing silver nitrate under γ-irradiation. Then, Ag nanoparticles were coated with PSt via interfacial-initiated polymerization with cumene hydroperoxide/ferrous sulfate/disodium ethylenediaminetetraacetate/sodium formaldehyde sulfoxylate (CHPO-Fe²⁺-EDTA-SFS) as the redox initiation pair. The resulted Ag@PSt nanoparticles were identified by transmission electron microscopy (TEM), dynamic light scattering (DLS), X-ray powder diffraction (XRD) and X-ray photoelectron spectroscopy (XPS).     

Synthesis,characterization and catalytic properties of cationic N-heterocyclic carbene silver complexes

Three new dibenzimidazolium salts bridged by 2-methylenepropane-1,3-diyl group were synthesized. Their dinuclear N-heterocyclic carbene Ag(I) complexes were prepared by the reactions of these salts with Ag₂O. The structures of the synthesized compounds were defined by nuclear magnetic resonance (NMR), Fourier-transform infrared spectroscopy (FT-IR), elemental analysis, and LC-MSMS (for complexes) techniques. Stability of the silver complexes was confirmed by ¹H NMR spectroscopy. Catalytic activities of Ag(I) compounds were tested for three-component coupling reaction of some aldehydes, amines, and phenylacetylene.     

Guanine/Ionic Liquid Derived Ordered Mesoporous Carbon Decorated with AuNPs as Efficient NADH Biosensor and Suitable Platform for Enzymes Immobilization and Biofuel Cell Design

Guanine‐ionic liquid derived ordered mesoporous carbon (GIOMC) decorated with gold nanoparticles was used as electrocatalyste for NADH oxidation and electrochemical platform for immobilization of glucose dehydrogenase (GDH) enzyme. The resulting GIOMC/AuNPs on the glassy carbon electrode can be used as novel redox‐mediator free for NADH sensing and this integrated system (GIOMC/AuNPs/GDH) shows excellent electrocatalytic activity toward glucose oxidation. Furthermore, the ionic liquid derived ordered mesoporous carbon derivate with Ph‐SO₃H (IOMC‐PhSO₃H) decorated with AuNPs has been developed to bilirubin oxidase enzyme (BOD) immobilization and the GC/IOMC‐PhSO₃H/BOD integrated system shows excellent bioelectrocatalytic activity toward oxygen reduction reaction. The proposed mesostructured platforms decorated by AuNPs have been developed to enhance mass transfer and charge transfer from biocatalyst to electrode, leading these bioanode and biocathode used for biofuel cell assembly. Integration designed bioanode and biocathode yielding a membrane‐less glucose/O₂ biofuel cell with power density of 33 (mW.cm⁻²) at 257 mV. The open circuit voltage of this biofuel cell and maximum produced current density were 508 mV and 0.252 (mA.cm⁻²) respectively.     

Synthese,Schwingungsspektren und Kristallstrukturen der Nitratoargentate (Ph4P)[Ag(NO3)2(CH3CN)]·CH3CN und (Ph4P)[Ag2(NO3)3]

Synthesis, Vibrational Spectra, and Crystal Structures of the Nitrato Argentates (Ph₄P)[Ag(NO₃)₂(CH₃CN)]·CH₃CN and (Ph₄P)[Ag₂(NO₃)₃] Tetraphenylphosphonium bromide reacts in acetonitril suspension with excess silver nitrate to give (Ph₄P)[Ag(NO₃)₂(CH₃CN)]·CH₃CN ( 1 ), whereas (Ph₄P)[Ag₂(NO₃)₃] ( 2 ) is obtained in a long‐time reaction from (Ph₄P)Br and excess AgNO₃ in dichloromethane suspension. Both complexes were characterized by vibrational spectroscopy (IR, Raman) and by single crystal structure determinations. 1 : Space group P2₁/c, Z = 4, lattice dimensions at 193 K: a = 1781.5(3), b = 724.8(1), c = 2224.2(3) pm, β = 96.83(1)°, R₁ = 0.0348. 1 contains isolated complex units [Ag(NO₃)₂(CH₃CN)]^?, in which the silver atom is coordinated by the chelating nitrate groups and by the nitrogen atom of the solvated CH₃CN molecule with a short Ag—N distance of 220.7(4) pm. 2 : Space group I2, Z = 4, lattice dimensions at 193 K: a = 1753.4(4), b = 701.7(1), c = 2105.5(4) pm, R₁ = 0.072. In the polymeric anions [Ag₂(NO₃)₃]^? each silver atom is coordinated in a chelating manner by one nitrate group and by two oxygen atoms of two bridging nitrate ions. In addition, each silver atom forms a weak π‐bonding contact with a phenyl group of the (Ph₄P)⁺ ions with shortest Ag···C separations of 266 and 299 pm, respectively, indicating a (4+1) coordination of silver atoms.     

“On line” mass spectrometric detection of ammonia oxidation products generated by polypyrrole based amperometric sensors

Polypyrrole (PPy) is the conducting polymer most widely employed in electrochemical sensors for ammonia detection in the last decade. Although sensors have been described in depth in the literature, the mechanism of ammonia detection by polypyrrole is still a matter of controversy. The differential electrochemical mass spectrometry (DEMS) technique, together with UV-Vis spectroscopy, gives direct and conclusive evidence with respect to the ammonia oxidation products formed in NaOH solution (pH=10) at polyrrole or N-methyl polypyrrole film sensors polarized at 0.35 V (Ag/AgCl). Monitoring of the different possible ammonia oxidation products by on-line DEMS measurements indicates that only NO is formed and that other species such as N₂ or N₂O are absent. UV-Vis absorption spectroscopy also showed that ionic products such as nitrate or nitrite are not formed.