Solvothermal synthesis and luminescent properties of monodisperse LaPO4:Ln (Ln=Eu, Ce, Tb) particles

Monodisperse rare-earth ion (Eu³⁺, Ce³⁺, Tb³⁺) doped LaPO₄ particles with oval morphology were successfully prepared through a facile solvothermal process without further heat treatment. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) spectra and the kinetic decays were performed to characterize these samples. The XRD results reveal that all the doped samples are well crystalline at 180 °C and assigned to the monoclinic monazite-type structure of the LaPO₄ phase. It has been shown that all the as-synthesized samples show perfectly oval morphology with narrow size distribution. The possible growth mechanism of the LaPO₄:Ln has been investigated as well. Upon excitation by ultraviolet radiation, the LaPO₄:Eu³⁺ phosphors show the characteristic ⁵D₀−⁷F_1-4 emission lines of Eu³⁺, while the LaPO₄:Ce³⁺, Tb³⁺ phosphors demonstrate the characteristic ⁵D₄−⁷F_3-6 emission lines of Tb³⁺.     

La7O6(BO3)(PO4)2:Eu3+/Tb3+荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La₇O₆（BO₃）（PO₄）₂：Eu³⁺材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为⁵D₀→⁷F₂特征能级跃迁,Eu³⁺的最优掺杂浓度为0.08,对应的CIE坐标为（0.610 2,0.382 3）;La₇O₆（BO₃）（PO₄）₂：Tb³⁺材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb³⁺的⁵D₄→⁷F₅能级跃迁,Tb³⁺离子的最优掺杂浓度为0.15,对应的CIE坐标为（0.317 7,0.535 2）。此外,对2种材料的变温光谱分析发现Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂荧光材料均具有良好的热稳定性。     

Preparation and luminescence properties of Ce and/or Tb doped LaPO4 nanofibers and microbelts by electrospinning

Ce³⁺ and/or Tb³⁺ doped LaPO₄ nanofibers and microbelts have been prepared by a combination method of sol-gel process and electrospinning. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL), low voltage cathodoluminescence (CL) and time-resolved emission spectra as well as kinetic decays were used to characterize the resulting samples. SEM and TEM results indicate the as-formed precursor fibers and belts are smooth, and the as-prepared nanofibers and microbelts consist of nanoparticles. The doped rare-earth ions show their characteristic emission under ultraviolet excitation, i.e. Ce³⁺ 5d-4f and Tb³⁺⁵D₄-⁷F_J (J=6-3) transitions, respectively. The energy transfer process from Ce³⁺ to Tb³⁺ in LaPO₄:Ce³⁺, Tb³⁺ nanofibers was further studied by the time-resolved emission spectra. Under low-voltage electron beam excitation, LaPO₄:Ce³⁺, Tb³⁺ microbelt phosphors have a higher intensity than that of nanofiber phosphors.     

Synthesis, vacuum ultraviolet and near ultraviolet-excited luminescent properties of GdCaAl3O7: RE (RE=Eu, Tb)

Vacuum ultraviolet (VUV) excitation and photoluminescent (PL) properties of Eu³⁺ and Tb³⁺ ion-doped aluminate phosphors, GdCaAl₃O₇:Eu³⁺ and GdCaAl₃O₇:Tb³⁺ have been investigated. X-ray diffraction (XRD) patterns indicate that the phosphor GdCaAl₃O₇ forms without impurity phase at 900 °C. Field emission scanning electron microscopy (FE-SEM) images show that the particle size of the phosphor is less than 3 μm. Upon excitation with VUV irradiation, the phosphors show a strong emission at around 619 nm corresponding to the forced electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺, and at around 545 nm corresponding to the ⁵D₄→⁷F₅ transition of Tb³⁺. The results reveal that both GdCaAl₃O₇:RE³⁺ (RE=Eu, Tb) are potential candidates as red and green phosphors, respectively, for use in plasma display panel (PDP).     

A new promising phosphor, Na3La2(BO3)3:Ln (Ln=Eu, Tb)

We present an efficient way to search a host for ultraviolet (UV) phosphor from UV nonlinear optical (NLO) materials. With the guidance, Na₃La₂(BO₃)₃ (NLBO), as a promising NLO material with a broad transparency range and high damage threshold, was adopted as a host material for the first time. The lanthanide ions (Tb³⁺ and Eu³⁺)-doped NLBO phosphors have been synthesized by solid-state reaction. Luminescent properties of the Ln-doped (Ln=Tb³⁺, Eu³⁺) sodium lanthanum borate were investigated under UV ray excitation. The emission spectrum was employed to probe the local environments of Eu³⁺ ions in NLBO crystal. For red phosphor, NLBO:Eu, the measured dominating emission peak was at 613 nm, which is attributed to ⁵D₀-⁷F₂ transition of Eu³⁺. The luminescence indicates that the local symmetry of Eu³⁺ in NLBO crystal lattice has no inversion center. Optimum Eu³⁺ concentration of NLBO:Eu³⁺ under UV excitation with 395 nm wavelength is about 30 mol%. The green phosphor, NLBO:Tb, showed bright green emission at 543 with 252 nm excited light. The measured concentration quenching curve demonstrated that the maximum concentration of Tb³⁺ in NLBO was about 20%. The luminescence mechanism of Ln-doped NLBO (Tb³⁺ and Eu³⁺) was analyzed. The relative high quenching concentration was also discussed.     

Uniform AMoO4:Ln (A=Sr, Ba; Ln=Eu, Tb) submicron particles: Solvothermal synthesis and luminescent properties

Rare-earth ions (Eu³⁺, Tb³⁺) doped AMoO₄ (A=Sr, Ba) particles with uniform morphologies were successfully prepared through a facile solvothermal process using ethylene glycol (EG) as protecting agent. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) spectra and the kinetic decays were performed to characterize these samples. The XRD results reveal that all the doped samples are of high purity and crystallinity and assigned to the tetragonal scheelite-type structure of the AMoO₄ phase. It has been shown that the as-synthesized SrMoO₄:Ln and BaMoO₄:Ln samples show respective uniform peanut-like and oval morphologies with narrow size distribution. The possible growth process of the AMoO₄:Ln has been investigated in detail. The EG/H₂O volume ratio, reaction temperature and time have obvious effect on the morphologies and sizes of the as-synthesized products. Upon excitation by ultraviolet radiation, the AMoO₄:Eu³⁺ phosphors show the characteristic ⁵D₀–⁷F_1–4 emission lines of Eu³⁺, while the AMoO₄:Tb³⁺ phosphors exhibit the characteristic ⁵D₄–⁷F_3–6 emission lines of Tb³⁺. These phosphors exhibit potential applications in the fields of fluorescent lamps and light emitting diodes (LEDs).     

Fabrication and optical properties of core-shell structured spherical SiO2@GdVO4:Eu phosphors via sol-gel process

Europium-doped nanocrystalline GdVO₄ phosphor layers were coated on the surface of preformed submicron silica spheres by sol-gel method. The resulted SiO₂@Gd_0.95Eu_0.05VO₄ core-shell particles were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (FESEM), energy-dispersive X-ray spectra (EDS), transmission electron microscopy (TEM), photoluminescence (PL) spectra, low voltage cathodoluminescence (CL), time resolved PL spectra and kinetic decays. The XRD results demonstrate that the Gd_0.95Eu_0.05VO₄ layers begin to crystallize on the SiO₂ spheres after annealing at 600 ^°C and the crystallinity increases with raising the annealing temperature. The obtained core-shell phosphors have spherical shape, narrow size distribution (average size ca. 600 nm), non-agglomeration. The thickness of the Gd_0.95Eu_0.05VO₄ shells on the SiO₂ cores could be easily tailored by varying the number of deposition cycles (50 nm for four deposition cycles). PL and CL show that the emissions are dominated by ⁵D₀-⁷F₂ transition of Eu³⁺ (618 nm, red). The PL and CL intensities of Eu³⁺ increase with increasing the annealing temperature and the number of coating cycles. The optimum concentration for Eu³⁺ was determined to be 5 mol% of Gd³⁺ in GdVO₄ host.     

Enhanced photoluminescence of Ba2GdNbO6: Eu/Dy phosphors by Li doping

The Ba₂GdNbO₆: Eu³⁺/Dy³⁺ and Li⁺-doped Ba₂GdNbO₆: Eu³⁺/Dy³⁺ phosphors were prepared by solid-state reaction process. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and photoluminescence (PL) as well as lifetimes, was utilized to characterize the resulting phosphors. Under the excitation of ultraviolet light, the Ba₂GdNbO₆: Eu³⁺/Dy³⁺ and Li⁺-doped Ba₂GdNbO₆: Eu³⁺/Dy³⁺ show the characteristic emissions of Eu³⁺ (⁵D₀-⁷F_1,2,3 transitions dominated by ⁵D₀-⁷F₁ at 593 nm) and Dy³⁺ (⁴F_9/2-⁶H_15/2,_13/2 transitions dominated by ⁴F_9/2-⁶H_15/2 at 494 nm), respectively. The incorporation of Li⁺ ions into the Ba₂GdNbO₆: Eu³⁺/Dy³⁺ phosphors has enhanced the PL intensities depending on the doping concentration of Li⁺, and the highest emission was obtained in Ba₂Gd_0.9NbO₆: 0.10Eu³⁺, 0.01Li⁺ and Ba₂Gd_0.95NbO₆: 0.05Dy³⁺, 0.07Li⁺, respectively. An energy level diagram was proposed to explain the luminescence process in the phosphors.     

La_7O_6(BO_3)(PO_4)_2∶Eu~(3+)/Tb~(3+)荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu~(3+)和Tb~(3+)掺杂的La_7O_6(BO_3)(PO_4)_2系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La_7O_6(BO_3)(PO_4)_2∶Eu~(3+)材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为5D0→7F2特征能级跃迁,Eu~(3+)的最优掺杂浓度为0.08,对应的CIE坐标为(0.610 2,0.382 3);La_7O_6(BO_3)(PO_4)_2∶Tb~(3+)材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb~(3+)的5D4→7F5能级跃迁,Tb~(3+)离子的最优掺杂浓度为0.15,对应的CIE坐标为(0.317 7,0.535 2)。此外,对2种材料的变温光谱分析发现Eu~(3+)和Tb~(3+)掺杂的La_7O_6(BO_3)(PO_4)_2荧光材料均具有良好的热稳定性。     

Sonochemical synthesis and luminescence properties of single-crystalline BaF2:Eu nanospheres

BaF₂ nanocrystals doped with 5.0 mol% Eu³⁺ has been successfully synthesized via a facile, quick and efficient ultrasonic solution route employing the reactions between Ba(NO₃)₂, Eu(NO₃)₃ and KBF₄ under ambient conditions. The product was characterized via X-ray powder diffraction (XRD), scanning electron micrographs (SEM), transmission electron microscopy (TEM), high-resolution transmission electron micrographs (HRTEM), selected area electron diffraction (SAED) and photoluminescence (PL) spectra. The ultrasonic irradiation has a strong effect on the morphology of the BaF₂:Eu³⁺ particles. The caddice-sphere-like particles with an average diameter of 250 nm could be obtained with ultrasonic irradiation, whereas only olive-like particles were produced without ultrasonic irradiation. The results of XRD indicate that the obtained BaF₂:Eu³⁺ nanospheres crystallized well with a cubic structure. The PL spectrum shows that the BaF₂:Eu³⁺ nanospheres has the characteristic emission of Eu^{3+ 5}D₀-⁷F_J (J=1-4) transitions, with the magnetic dipole ⁵D₀-⁷F₁ allowed transition (590 nm) being the most prominent emission line.     

Photoluminescence properties of a novel phosphor, Na3La9O3(BO3)8:RE(RE=Eu,Tb)

The new oxyborate phosphors, Na₃La₉O₃(BO₃)₈:Eu³⁺ (NLBO:Eu) and Na₃La₉O₃(BO₃)₈:Tb³⁺ (NLBO:Tb) were prepared by solid-state reactions. The photoluminescence characteristics under UV excitation were investigated. The dominated emission of Eu³⁺ corresponding to the electric dipole transition ⁵D₀→⁷F₂ is located at 613 nm and bright green luminescence of NLBO:Tb attributed to the transition ⁵D₄→⁷F₅ is centered at 544 nm. The concentration dependence of the emission intensity showed that the optimum doping concentration of Eu and Tb is 30% and 10%, respectively.     

Host-sensitized luminescence of Dy, Pr, Tb in polycrystalline CaIn2O4 for field emission displays

CaIn₂O₄:Dy³⁺/Pr³⁺/Tb³⁺ blue-white/green/green phosphors were prepared by the Pechini sol-gel process. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), diffuse reflectance, photoluminescence (PL) and cathodoluminescence (CL) spectra as well as lifetimes were utilized to characterize the samples. The XRD results reveal that the samples begin to crystallize at 800 °C and pure CaIn₂O₄ phase can be obtained after annealing at 900 °C. The FE-SEM images indicate that the CaIn₂O₄:Dy³⁺, CaIn₂O₄:Pr³⁺ and CaIn₂O₄:Tb³⁺ samples consist of spherical grains with size around 200-400 nm. Under the excitation of ultraviolet light and low-voltage electron beams (1-5 kV), the CaIn₂O₄:Dy³⁺, CaIn₂O₄:Pr³⁺ and CaIn₂O₄:Tb³⁺ phosphors show the characteristic emissions of Dy³⁺ (⁴F_9/2-⁶H_15/2 and ⁴F_9/2-⁶H_13/2 transitions, blue-white), Pr³⁺ (³P₀-³H₄, ¹D₂-³H₄ and ³P₁-³H₅ transitions, green) and Tb³⁺ (⁵D₄-⁷F_6,5,4,3 transitions, green), respectively. All the luminescence is resulted from an efficient energy transfer from the CaIn₂O₄ host lattice to the doped Dy³⁺, Pr³⁺ and Tb³⁺ ions, and the corresponding luminescence mechanisms have been proposed.     

Polyol-mediated solvothermal synthesis and luminescence properties of CeF3, and CeF3:Tb nanocrystals

CeF₃ and CeF₃:Tb³⁺ nanocrystals were successfully synthesized through a facile and effective polyol-mediated route with ethylene glycol (EG) as solvent. Various experimental techniques including X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and photoluminescence (PL) spectra as well as decay dynamics were used to characterize the samples. The results indicated that the content of NH₄F and reactant concentrations were key factors in the product shape and size. Excessive NH₄F was necessary for the formation of hexagonal nanoplates. The specific morphology of product can be controlled by changing the NH₄F content and reactant concentrations. In addition, Tb³⁺ doped-CeF₃ sample shows strong green emission centered at 544 nm corresponding to the ⁵D₄-⁷F₅ transition of Tb³⁺. Due to the decrease of nonradiative decay rate, the lifetime of ⁵D₄ level of Tb³⁺ become longer gradually upon increasing the size of product.     

Hydrothermal synthesis and luminescent properties of LuBO3:Tb microflowers

Hexagonal vaterite-type LuBO₃:Tb³⁺ microflower-like phosphors have been successfully prepared by an efficient surfactant- and template-free hydrothermal process directly without further sintering treatment. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectrometry, transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL) and cathodoluminescence (CL) spectra as well as kinetic decays were used to characterize the samples. The as-obtained phosphor samples present flowerlike agglomerates composed of nanoflakes with thickness of 40 nm and high crystallinity in spite of the moderate reaction temperature of 200 °C. The reaction mechanism has been considered as a dissolution/precipitation mechanism; the self-assembly evolution process has been proposed on homocentric layer-by-layer growth style. Under ultraviolet excitation into the 4f⁸→4f⁷5d transition of Tb³⁺ at 248 nm (or 288 nm) and low-voltage electron beam excitation, LuBO₃:Tb³⁺ samples show the characteristic green emission of Tb³⁺ corresponding to ⁵D₄→⁷F_{6, 5, 4, 3} transitions with the ⁵D₄→⁷F₅ transition (542 nm) being the most prominent group, which have potential applications in fluorescent lamps and field emission displays.     

Hydrothermal synthesis of core-shell structured PS@GdPO<Subscript>4</Subscript>:Tb<Superscript>3+</Superscript>/Ce<Superscript>3+</Superscript> spherical particles and their luminescence properties

Non-aggregated spherical polystyrene (PS) particles were coated with GdPO₄:Tb³⁺/Ce³⁺ phosphor layers by a conventional hydrothermal synthesis using poly(vinylpyrrolidone) (PVP) as an additive without further annealing treatment. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), photoluminescence (PL), as well as luminescence decay experiments were used to characterise the resulting core-shell structured PS@GdPO₄:Tb³⁺/Ce³⁺ samples. The results of XRD indicated that the PS particles were successfully coated with the GdPO₄:Tb³⁺/Ce³⁺ phosphor layers, which could be further verified by the images of FESEM. Under ultraviolet excitation, the PS@GdPO₄:Tb³⁺/Ce³⁺ phosphors show Tb³⁺ characteristic emission, i.e. ⁵D₄-⁷F_J (J = {6, 5, 4, 3}) emission lines with green emission ⁵D₄-⁷F₅ (543 nm) as the most prominent group. The core-shell phosphors so obtained have potential applications in field emission display (FED) and plasma display panels (PDP).     

Homogeneous one-dimensional structured Tb(OH)3:Eu nanorods: Hydrothermal synthesis, energy transfer, and tunable luminescence properties

Nearly monodisperse, homogeneous and well-defined one-dimensional Tb_(1−x)(OH)₃:xEu³⁺ (x=0-3 mol%) nanorods have been prepared through hydrothermal method. The size of the Tb(OH)₃:Eu³⁺ rods could be modulated from nano- to micro-scale by using different amount of ammonia solution. They present highly crystallinity in spite of the moderate reaction temperature. Under ultraviolet excitation into the f→f transition of Tb³⁺ at 382 nm, Tb(OH)₃ samples show the characteristic emission of Tb³⁺ corresponding to ⁵D₄→⁷F_{6, 5, 4, 3} transitions; whereas Tb(OH)₃:Eu³⁺ samples mainly exhibit the characteristic emission of Eu³⁺ corresponding to ⁵D₀→⁷F_{1, 2, 4} transitions due to an efficient energy transfer occurs from Tb³⁺ to Eu³⁺. The increase of Eu³⁺ concentration leads to the increase of the energy transfer efficiency from Tb³⁺ to Eu³⁺. The PL colors of Tb(OH)₃:xEu³⁺ phosphors can be easily tuned from green, yellow, orange, to red by changing the doping concentration (x) of Eu³⁺.     

Sol-gel deposition and luminescent properties of LaMgAl11O19:Ce/Tb phosphor films

Rare earth ions (Ce³⁺, Tb³⁺)-doped LaMgAl₁₁O₁₉ phosphor films were deposited on quartz glass substrates by Pechini sol-gel and dip coating method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric and differential thermal analysis (TG-DTA), atomic force microscopy (AFM), field emission scanning electronic microscopy (FESEM), photoluminescence (PL) spectra, and lifetimes were used to characterize the resulting films. The results of XRD indicated that the magnetoplumbite structure LaMgAl₁₁O₁₉ phase can be obtained at 1200 °C on quartz glass substrates. This was further verified by the results of FT-IR and TG-DTA. AFM study showed that uniform films have an average grain size of 150 nm and a root mean square (RMS) roughness of 4 nm. The thickness of the films characterized by FESEM is about 340 nm. LaMgAl₁₁O₁₉:Ce³⁺ film showed the parity and spin allowed 5d-4f band emission of Ce³⁺ with a maximum at 350 nm. Ce³⁺, Tb³⁺-codoped LaMgAl₁₁O₁₉ films showed the band emission of Ce³⁺ and characteristic emission of Tb³⁺, namely, ⁵D_3,4-⁷F_J (J=6, 5, 4, 3) due to an efficient energy transfer from Ce³⁺ to Tb³⁺ in the host.     

A novel red emitting phosphor Ca2SnO4: Eu

A novel red emitting phosphor, Eu³⁺-doped Ca₂SnO₄, was prepared by the solid-state reaction. X-ray powder diffraction (XRD) analysis confirmed the formation of Ca₂SnO₄: Eu³⁺. Field-emission scanning electron-microscopy (FE-SEM) observation indicated a narrow size-distribution of about 500 nm for the particles with spherical shape. Photoluminescence measurements indicated that the phosphor exhibits bright red emission at about 615 nm under UV excitation. The excellent luminescence properties make it possible as a good candidate for plasma display panels (PDP) application. Splitting of the ⁵D₀-⁷F_J transitions of Ca₂SnO₄: Eu³⁺ suggests that the Eu³⁺ ions occupied two nonequivalent sites in the crystallite. The luminescence lifetime measurement showed a bi-exponential decay, providing other evidence for the existence of two different environments for Eu³⁺ ions.     

Morphology control and luminescence properties of BaMgAl10O17:Eu phosphors prepared by spray pyrolysis

Starting from the aqueous solutions of metal nitrates with citric acid and polyethylene glycol (PEG) as additives, BaMgAl₁₀O₁₇:Eu²⁺ (BAM:Eu²⁺) phosphors were prepared by a two-step spray pyrolysis (SP) method. X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence spectra were used to characterize the resulted BAM:Eu²⁺ phosphors. The obtained BAM:Eu²⁺ phosphor particles have spherical shape, submicron size (0.5-3 μm). The effects of process conditions of the spray pyrolysis, such as molecular weight and concentration of PEG, on the morphology and luminescence properties of phosphor particles were investigated. Adequate amount of PEG was necessary for obtaining spherical particles, and the optimum emission intensity could be obtained when the concentration of PEG was 0.03 g/ml in the precursor solution. Moreover, the emission intensity of the phosphors increased with increasing of metal ion concentration in the solution. Compared with the BAM:Eu²⁺ phosphor prepared by citrate-gel method, spherical BAM:Eu²⁺ phosphor particles showed a higher emission intensity.     

空气中合成固溶体荧光粉Ba2(Zn, Mg)Si2O7:Ce3+,Eu2+,Eu3+及其发光特性

采用高温固相法在空气中合成了Ba_1.97-yZn_1-xMg_xSi₂O₇:0.03Eu,yCe³⁺系列荧光粉。分别采用X-射线衍射和荧光光谱对所合成荧光粉的物相和发光性质进行了表征。在紫外光330~360 nm激发下,固溶体荧光粉Ba_1.97-yZn_1-xMg_xSi₂O₇:0.03Eu的发射光谱在350~725 nm范围内呈现多谱峰发射,360和500 nm处有强的宽带发射属于Eu²⁺离子的4f⁶5d¹-4f⁷跃迁,590~725 nm红光区窄带谱源于Eu³⁺的⁵D₀-⁷F_J (J=1,2,3,4)跃迁,这表明,在空气气氛中,部分Eu³⁺在Ba_1.97-yZn_1-xMg_xSi₂O₇基质中被还原成了Eu²⁺;当x=0.1时,荧光粉Ba_1.97Zn_0.9Mg_0.1Si₂O₇:0.03Eu的绿色发光最强,表明Eu³⁺被还原成Eu²⁺离子的程度最大。当共掺入Ce³⁺离子后,形成Ba_1.97-yZn_0.9Mg_0.1Si₂O₇:0.03Eu,yCe³⁺荧光粉体系,其发光随着Ce³⁺离子浓度的增大由蓝绿区经白光区到达橙红区;发现名义组成为Ba_1.96Zn_0.9Mg_0.1Si₂O₇:0.01Ce³⁺,0.03Eu的荧光粉的色坐标为(0.323,0.311),接近理想白光,是一种有潜在应用价值的白光荧光粉。讨论了稀土离子在Ba₂Zn_0.9Mg_0.1Si₂O₇基质中的能量传递与发光机理。