Formation and structural refinements of tunneled intergrowth phases in the Ga2O3-In2O3-SnO2-TiO2 system

Over 100 samples were prepared as (Ga,In)₄(Sn,Ti)_n−4O_2n−2, n=6, 7, and 9 by solid-state reaction at 1400 °C and characterized by X-ray diffraction. Nominally phase-pure beta-gallia-rutile intergrowths were observed in samples prepared with n=9 (0.17?x?0.35 and 0?y?0.4) as well as in a few samples prepared with n=6 and 7. Rietveld analysis of neutron time-of-flight powder diffraction data were conducted for three phase-pure samples. The n=6 phase Ga_3.24In_0.76Sn_1.6Ti_0.4O₁₀ is monoclinic, P2/m, with Z=2 and a=11.5934(3) Å, b=3.12529(9) Å, c=10.6549(3) Å, β=99.146(1)°. The n=7 phase Ga_3.24In_0.76Sn_2.4Ti_0.6O₁₂ is monoclinic, C2/m, with Z=2 and a=14.2644(1) Å, b=3.12751(2) Å, c=10.6251(8) Å, β=108.405(1)°. The n=9 phase Ga_3.16In_0.84Sn₄TiO₁₆ is monoclinic, C2/m, with Z=2 a=18.1754(2) Å, b=3.13388(3) Å, c=10.60671(9) Å, β=102.657(1)°. All of the structures are similar in that they possess distorted hexagonal tunnels parallel to the [010] vector.     

Crystal structure, thermal expansion and conductivity of anisotropic La1−xSrxGa1−2xMg2xO3−y (x=0.05, 0.1) single crystals

Crystal structure and anisotropy of the thermal expansion of single crystals of La_1−xSr_xGa_1−2xMg_2xO_3−y (x=0.05 and 0.1) were measured in the temperature range 300-1270 K. High-resolution X-ray powder diffraction data obtained by synchrotron experiments have been used to determine the crystal structure and thermal expansion. The room temperature structure of the crystal with x=0.05 was found to be orthorhombic (Imma, Z=4, a=7.79423(3) Å, b=5.49896(2) Å, c=5.53806(2) Å), whereas the symmetry of the x=0.1 crystal is monoclinic (I2/a, Z=4, a=7.82129(5) Å, b=5.54361(3) Å, c=5.51654(4) Å, β=90.040(1)°). The conductivity in two orthogonal directions of the crystals has been studied. Both, the conductivity and the structural data indicate three phase transitions in La_0.95Sr_0.05Ga_0.9Mg_0.1O_2.92 at 520-570 K (Imma-I2/a), 770 K (I2/a-R3c) and at 870 K (R3c-R-3c), respectively. Two transitions at 770 K (I2/a-R3c) and in the range 870-970 K (R3c-R-3c) occur in La_0.9Sr_0.1Ga_0.8Mg_0.2O_2.85.     

Building three-dimensional metal phosphites from the corner-shared four-membered rings chain

Three new compounds, a one-dimensional (1D) zinc phosphite, (C₄H₈N₂H₄)[Zn(HPO₃)₂] (I), two three-dimensional (3D) metal phosphites (C₄H₈N₂H₄)[Zn₃(HPO₃)₄] (II) and (C₄H₈N₂H₄)[Zn_(3−x)Co_x(HPO₃)₄(H₂O)₂] (x≈0.83) (III) have been synthesized under hydrothermal conditions templated by piperazine and characterized by single-crystal X-ray diffraction, XRD, IR, UV-vis spectra and SQUID magnetometer. Compound I displays 1D chain-like structure, containing corner-shared (cs) four-membered rings. Interestingly, the structures of II and III show 1D chains similar to those observed in I. It is noteworthy that III represents the first cobalt-substituted zinc-phosphite. Crystal data: I, monoclinic, C2/c, a=17.748(2) Å, b=7.428(9) Å, c=8.8071(11) Å, β=105.345(3)°, V=1091.9 Å³, Z=4. II, Monoclinic P2₁/c, a=9.9435(4) Å, b=10.1438(3) Å, c=17.8164(5) Å, β=95.665(2)°, V=1788.27 Å³, Z=4, and III, Monoclinic P2₁/c, a=7.2338(2) Å, b=15.0238(5) Å, c=9.2153(3) Å, β=107.741(2)°, V=953.88(5) Å³, Z=2.     

Neutron diffraction study of phase transitions in perovskite-type strontium molybdate SrMoO3

The structure of a polycrystalline sample of SrMoO₃ has been investigated using powder neutron diffraction from 5 to 300 K, to reveal two structural phase transitions, the first from the cubic structure with a=3.97629(3) Å to a tetragonal structure in I4/mcm near 266 K and the second to an orthorhombic Imma phase below 125 K. The average Mo-O distance is essentially independent of temperature. The temperature dependence of the octahedral tilting appears typical of a tricritical phase transition.     

Crystal structures and phase transitions of Sr2CrSbO6

Sr₂CrSbO₆ was synthesized by the conventional solid-state reaction process. X-ray powder diffraction (XRPD) and neutron powder diffraction (NPD) has been used to reinvestigate the structure at room temperature and to study the phase transitions at high- and low-temperature. Rietveld analysis revealed that Sr₂CrSbO₆ crystallizes at room temperature in a monoclinic system having a space group I2/m, with a=5.5574(1) Å; b=5.5782(1) Å; c=7.8506(2) Å and β=90.06(2), no P2₁/n space group as was previously reported. The high-temperature study (300-870 K) has shown that the compound presents the following temperature induced phase-transition sequence: I2/m-I4/m-Fm-3m. The low-temperature study (100-300 K) demonstrated that the room-temperature I2/m monoclinic symmetry seems to be stable down to 100 K.     

The first indium-organic two-dimensional layer network with rhombus grids

The indium(III)-organic compound [In(HBtc)₂(4,4′-bpy)](4,4′-Hbpy)(H₂O)_0.5 (Btc=1,3,5-benzenetricarboxylate, 4,4′-bpy=4,4′-bipyridine) has been synthesized under hydrothermal condition and characterized by IR, fluorescent spectroscopy, TGA and single-crystal X-ray diffraction analyses. The compound crystallizes in monoclinic, space group P2(1)/c, a=17.0884(2) Å, b=12.28390(10) Å, c=17.9456(4) Å, β=104.1920(10)°, V=3652.03(10) Å³, Z=4, R₁=0.0572 and wR₂=0.1116 [I>2σ(I)]. All the indium atoms in the compound are hepta-coordinated and link 1,3,5-benzenetricarboxylate forming a 2-D layer structure with rhombus grids.     

Crystal structure and phase transitions in perovskite-like C(NH2)3SnCl3

X-ray single-crystal diffraction, high-temperature powder diffraction and differential thermal analysis at ambient and high pressure have been employed to study the crystal structure and phase transitions of guanidinium trichlorostannate, C(NH₂)₃SnCl₃. At 295 K the crystal structure is orthorhombic, space group Pbca, Z=8, a=7.7506(2) Å, b=12.0958(4) Å and c=17.8049(6) Å, solved from single-crystal data. It is perovskite-like with distorted corner-linked SnCl₆ octahedra and with ordered guanidinium cations in the distorted cuboctahedral voids. At 400 K the structure shows a first-order order-disorder phase transition. The space group is changed to Pnma with Z=4, a=12.1552(2) Å, b=8.8590(2) Å and c=8.0175(1) Å, solved from powder diffraction data and showing disordering of the guanidinium cations. At 419 K, the structure shows yet another first-order order-disorder transformation with disordering of the SnCl₃⁻ part. The space group symmetry is maintained as Pnma, with a=12.1786(2) Å, b=8.8642(2) Å and c=8.0821(2) Å. The thermodynamic parameters of these transitions and the p-T phase diagram have been determined and described.     

Synthesis and characterization of two aluminophosphates templated by N-methyl-1,3-diaminopropane

Two crystalline aluminophosphates have been synthesized under hydrothermal conditions using N-methyl-1,3-diaminopropane (MeDAP) as structure-directing molecule. The first one, denoted MDAP-1 is observed as an intermediate phase during the crystallization of the final product MDAP-2. The structure of MDAP-1, a 2D-layered compound with the empirical formula (C₄H₁₄N₂)_1.5[Al₃P₄O₁₆] was refined using powder X-ray diffraction data. It crystallizes in the monoclinic space group P2₁/c (No. 14) with a=14.080(10) Å, b=8.4763(1) Å, c=18.9954(1) Å, β=100.95(5)° and Z=4. Inorganic sheets contain a novel 4×6 net, constructed from capped 6-membered rings. The sheets are held together by partially disordered, doubly protonated MeDAP molecules. Single crystal analysis showed that MDAP-2 is isostructural with AlPO₄-21 and crystallizes in the monoclinic space group P2₁/n (No. 14) with a=8.488(6) Å, b=17.72(2) Å, c=9.024(6) Å, β=106.96(5)° and Z=4. MDAP-2 differs from AlPO₄-21 by the presence of an octahedrally coordinated aluminum in the framework.     

Stereoselective synthesis of (E)-N,N-diethyl-3-(imidazo[1,2-a]pyrid-2-yl)-2-(phenylsulfonyl)propenamide

The title compound, gem-amidovinylsulfone 3, was synthesized stereoselectively by aldolic condensation of N,N-diethylphenylsulfonylacetamide 1 on imidazo[1,2-a]pyridine-2-carbaldehyde 2 adding Et₃N at the end. The X-ray crystal structure of 3 [C₂₀H₂₁N₃O₃S: M_r=383.5, monoclinic, P2₁, a=8.191(4) Å, b=21.132(2) Å, c=11.752(1) Å, β=96.40(2)°, V=2022(1) Å³, Z=4 (two molecules per asymmetric unit), D_calc=1.260 g cm⁻³, λ(Mo Kα)=0.71073 Å, μ=0.184 mm⁻¹, F(000)=808, T=293(2)K, R=0.059 for 5105 observed reflections with I≥2σ(I)] was determined, and confirmed the (E) configuration.     

K2Mo4O13 phases prepared by hydrothermal synthesis

Hydrothermal synthesis in the K-Mo oxide system was investigated as a function of the pH of the reaction medium. Four compounds were formed, including two K₂Mo₄O₁₃ phases. One is a new low-temperature polymorph, which crystallizes in the orthorhombic, space group Pbca, with Z=8 and unit cell dimensions a=7.544(1) Å, b=15.394(2) Å, c=18.568(3) Å. The other is the known triclinic K₂Mo₄O₁₃, whose structure was re-determined from single crystal data; its cell parameters were determined as a=7.976(2) Å, b=8.345(2) Å, c=10.017(2) Å, α=107.104(3)°, β=102.885(3)°, γ=109.760(3)°, which are the standard settings of the crystal lattice. The orthorhombic phase converts endothermically into triclinic phase at ca. 730 K with a heat of transition of 8.31 kJ/mol.     

Polymorphism of new rubidium magnesium monophosphate

Novel phase RbMgPO₄, synthesized by solid state reaction, sustains phase transitions at 169 and 184 °C. The medium (β)- and high- (γ) temperature forms (orthorhombic, respectively Pna2₁ and Pnma, Z=4) are typical stuffed tridymites but the ambient form (α) exhibits an unusual three-fold Pna2₁ superstructure that results from the change of coordination of one third of the Mg atoms. Cell parameters are as follows: for α: a=26.535(1) Å, b=9.2926(3) Å, c=5.3368(2) Å; for β: a=8.7938(3) Å, b=9.3698(3) Å, c=5.3956(1) Å; for γ: a=8.7907(3) Å, b=5.4059(1) Å, c=9.3949(3) Å.     

Synthesis, crystal structure, phase transition and thermal behaviour of a new dabcodiium hexaaquanickel(II) bis(sulphate), (C6H14N2)[Ni(H2O)6](SO4)2

A new dabcodiium-templated nickel sulphate, (C₆H₁₄N₂)[Ni(H₂O)₆](SO₄)₂, has been synthesised and characterised by single-crystal X-ray diffraction at 20 and −173 °C, differential scanning calorimetry (DSC), thermogravimetry (TG) and temperature-dependent X-ray powder diffraction (TDXD). The high temperature phase crystallises in the monoclinic space group P2₁/n with the unit-cell parameters: a = 7.0000(1), b = 12.3342(2), c = 9.9940(2) Å; β = 90.661(1)°, V = 862.82(3) Å³ and Z = 2. The low temperature phase crystallises in the monoclinic space group P2₁/a with the unit-cell parameters: a = 12.0216(1), b = 12.3559(1), c = 12.2193(1) Å; β = 109.989(1)°, V = 1705.69(2) Å³ and Z = 4. The crystal structure of the HT-phase consists of Ni²⁺ cations octahedrally coordinated by six water molecules, sulphate tetrahedra and disordered dabcodiium cations linked together by hydrogen bonds. It undergoes a reversible phase transition (PT) of the second order at −53.7/−54.6 °C on heating-cooling runs. Below the PT temperature, the structure is fully ordered. The thermal decomposition of the precursor proceeds through three stages giving rise to the nickel oxide.     

The novel Cs4Nb6F8.5I3.5I6 octahedral niobium cluster fluoro-iodide: a step towards the Nb6F12 cluster core excision

The solid state synthesis of Cs₄Nb₆Fⁱ_8.5Iⁱ_3.5I^a₆ starting from Nb₆F₁₅ binary fluoride, as well as its crystal structure determined by X-ray single crystal diffraction, are presented in this work. This novel cluster compound is based on a Nb₆Iⁱ₃Fⁱ₆Lⁱ₃I^a₆ (L=F, I) discrete unit and crystallizes in the monoclinic system (space group C2/m; Z=4 ; a=10.4363(4) Å, b=18.1227(7) Å, c=19.5102(9) Å β=101.223(1)°, V=3619.5(3) Å³, R₁=0.057; wR₂=0.159). This halide is the first octahedral niobium cluster compound containing unshared terminal I^a ligands together with ordered μ₂-Iⁱ and μ₂-Fⁱ ligands on nine inner positions whilst the three last ones (Lⁱ) are slightly affected by a I/F random occupancy. The structural findings are discussed and compared with those of Nb₆F₁₅, Nb₆I₁₁, CsNb₆I₁₁ and the fluorochlorides and fluorobromides recently reported.     

High-pressure high-temperature synthesis and crystal structure of the isotypic rare earth (RE)-thioborate-sulfides RE9[BS3]2[BS4]3S3, (RE=Dy-Lu)

Application of high-pressure high-temperature conditions (3.5 GPa at 1673 K for 5 h) to mixtures of the elements (RE:B:S=1:3:6) yielded crystalline samples of the isotypic rare earth-thioborate-sulfides RE₉[BS₃]₂[BS₄]₃S₃, (RE=Dy-Lu), which crystallize in space group P6₃ (Z=2/3) and adopt the Ce₆Al_3.33S₁₄ structure type. The crystal structures were refined from X-ray powder diffraction data by applying the Rietveld method. Dy: a=9.4044(2) Å, c=5.8855(3) Å; Ho: a=9.3703(1) Å, c=5.8826(1) Å; Er: a=9.3279(12) Å, c=5.8793(8) Å; Tm: a=9.2869(3) Å, c=5.8781(3) Å; Yb: a=9.2514(5) Å, c=5.8805(6) Å; Lu: a=9.2162(3) Å, c=5.8911(3) Å. The crystal structure is characterized by the presence of two isolated complex ions [BS₃]^3- and [BS₄]^5- as well as [□(S^2-)₃] units.     

Synthesis, structure of [H3dien]·(MF6)·H2O (M=Cr, Fe) and Fe Mössbauer study of [H3dien]·(FeF6)·H2O

Single crystals of [H₃dien]·(FeF₆)·H₂O (I) and [H₃dien]·(CrF₆)·H₂O (II) are obtained by solvothermal synthesis under microwave heating. I is orthorhombic (Pna2₁) with a=11.530(2) Å, b=6.6446(8) Å, c=13.787(3) Å, V=1056.3(2) Å³ and Z=4. II is monoclinic (P2₁/c) with a=13.706(1) Å, b=6.7606(6) Å, c=11.3181(9) Å, β=99.38(1)°, V=1034.7(1) Å³ and Z=4. The structure determinations, performed from single crystal X-ray diffraction data, lead to the R₁/wR₂ reliability factors 0.028/0.066 for I and 0.035/0.102 for II. The structures of I and II are built up from isolated FeF₆ or CrF₆ octahedra, water molecules and triprotonated amines. In both structures, each octahedron is connected by hydrogen bonds to six organic cations and two water molecules. The iron-based compound is also characterized by ⁵⁷Fe Mössbauer spectrometry: the hyperfine structure confirms the presence of Fe³⁺ in octahedral coordination and reveals the existence of paramagnetic spin fluctuations.     

High-pressure structure of Li2CO3

The high-pressure behavior of Li₂CO₃ is studied up to 25 GPa with synchrotron angle-dispersive powder X-ray diffraction in diamond anvil cells and synthesis using a multi-anvil apparatus. A new non-quenchable hexagonal polymorph (P6₃/mcm, Z=2) occurs above 10 GPa with carbonate groups in a staggered configuration along the c-axis—a=4.4568(2) Å and c=5.1254(6) Å at 10 GPa. Two columns of face-shared distorted octahedra around the Li atoms are linked through octahedral edges. The oxygen atoms are coordinated to one carbon atom and four lithium atoms to form a distorted square pyramid. Splittings of X-ray reflections for the new polymorph observed above about 22 GPa under non-hydrostatic conditions arise from orthorhombic or monoclinic distortions of the hexagonal lattice. The results of this study are discussed in relation to the structural features found in other Me₂CO₃ carbonates (Me: Na, K, Rb, Cs) at atmospheric conditions.     

Subsolidus phase relations and crystal structures of the mixed-oxide phases in the In2O3-WO3 system

Subsolidus phase relationships in the In₂O₃-WO₃ system at 800-1400°C were investigated using X-ray diffraction. Two binary-oxide phases—In₆WO₁₂ and In₂(WO₄)₃—were found to be stable over the range 800-1200°C. Heating the binary-oxide phases above 1200°C resulted in the preferential volatilization of WO₃. Rietveld refinement was performed on three structures using X-ray diffraction data from nominally phase-pure In₆WO₁₂ at room temperature and from nominally phase-pure In₂(WO₄)₃ at 225°C and 310°C. The indium-rich phase, In₆WO₁₂, is rhombohedral, space group (rhombohedral), with Z=1, a=6.22390(4) Å, α=99.0338(2)° [hexagonal axes: a_H=9.48298(6) Å, c=8.94276(6) Å, a_H/c=0.9430(9)]. In₆WO₁₂ can be viewed as an anion-deficient fluorite structure in which 1/7 of the fluorite anion sites are vacant. Indium tungstate, In₂(WO₄)₃, undergoes a monoclinic-orthorhombic transition around 250°C. The high-temperature polymorph is orthorhombic, space group Pnca, with a=9.7126(5) Å, b=13.3824(7) Å, c=9.6141(5) Å, and Z=4. The low-temperature polymorph is monoclinic, space group P2₁/a, with a=16.406(2) Å, b=9.9663(1) Å, c=19.099(2) Å, β=125.411(2)°, and Z=8. The structures of the two In₂(WO₄)₃ polymorphs are similar, consisting of a network of corner sharing InO₆ octahedra and WO₄ tetrahedra.     

Hydrothermal syntheses and structures of two novel vanadium selenites, {[VO(OH)(H2O)](SeO3)}4·2H2O and (H3NCH2CH2NH3)[(VO)(SeO3)2]

Two novel vanadium selenites {[VO(OH)(H₂O)](SeO₃)}₄·2H₂O 1 and (H₃NCH₂CH₂NH₃)[(VO)(SeO₃)₂] 2 were synthesized by hydrothermal method and their crystal structures were determined by single-crystal X-ray diffraction. It is characterized by inductively coupled plasma (ICP), thermogravimetric (TG) and elemental analyses. Compound 1 crystallizes in the monoclinic system, space group C2/c, a=21.2250(11) Å, b=12.6309(6) Å, c=17.0249(10) Å, β=96.830(3)°, V=4531.8(4) Å³ and Z=8, R₁ [I>2σ(I)]=0.0344, wR₂ [I>2σ(I)]=0.119; Compound 2 crystallizes in the monoclinic system, space group P2₁/c, a=9.6389(4) Å, b=6.9922(3) Å, c=15.0324(5) Å, β=102.297(2)°, V=989.90(7) Å³ and Z=4, R₁ [I>2σ(I)]=0.0452, wR₂ [I>2σ(I)]=0.117. {[VO(OH)(H₂O)](SeO₃)}₄·2H₂O has a 1D structure constructed from the {[VO(OH)(H₂O)](SeO₃)}_∞ chains. (H₃NCH₂CH₂NH₃)[(VO)(SeO₃)₂] has a layered structure composed of alternating VO₅ and SeO₃ units with protonated ethylenediamine as interlayer guest.     

Hydroxylammonium fluorometalates: Synthesis and characterisation of a new fluorocuprate and fluorocobaltate

The first layered hydroxylammonium fluorometalates, (NH₃OH)₂CuF₄ and (NH₃OH)₂CoF₄, were prepared by the reaction of solid NH₃OHF and the aqueous solution of copper or cobalt in HF. Both compounds crystallize in monoclinic, P2₁/c, unit cell with parameters: a = 7.9617(2) Å, b = 5.9527(2) Å, c = 5.8060(2) Å, β = 95.226(2)° for (NH₃OH)₂CuF₄ and a = 8.1764(3) Å, b = 5.8571(2) Å, c = 5.6662(2) Å, β = 94.675(3)° for (NH₃OH)₂CoF₄, respectively. Magnetic susceptibility was measured between 2 K and 300 K giving the effective Bohr magneton number of 2.1 for Cu and 5.2 BM for Co. At low temperatures both complexes undergo a transition to magnetically ordered phase. The thermal decomposition of both compounds was studied by TG, DSC and X-ray powder diffraction. The thermal decomposition of (NH₃OH)₂CuF₄ is a complex process, yielding NH₄CuF₃ as an intermediate product and impure Cu₂O as the final residue, while (NH₃OH)₂CoF₄ decomposes in two steps, obtaining CoF₂ after the first step and CoO as the final product.     

Monoclinic phase of the misfit-layered cobalt oxide (Ca0.85OH)1.16CoO2

A monoclinic phase of the misfit-layered cobalt oxide (Ca_0.85OH)_1.16CoO₂ was successfully synthesized and characterized. It was found that this new material is a poly-type phase of the orthorhombic form of (CaOH)_1.14CoO₂, recently discovered by the present authors. Both the compounds consist of two interpenetrating subsystems: CdI₂-type CoO₂ layers and rock-salt-type double-atomic-layer CaOH blocks. However, these two phases exhibit a different stacking structure. By powder X-ray and electron diffraction (ED) studies, it was found that the two subsystems of (Ca_0.85OH)_1.16CoO₂ have c-centered monoclinic Bravais lattices with common a=4.898 Å, c=8.810 Å and β=95.8° lattice parameters, and different b parameters: b₁=2.820 Å and b₂=4.870 Å. Chemical analyses revealed that the monoclinic phase has a cobalt valence of +3.1-3.2. Resistivity of the monoclinic phase is approximately 10¹-10⁵ times lower than that of the orthorhombic phase. This suggests that the monoclinic phase is a hole-doped phase of the insulating orthorhombic phase. Furthermore, large positive Seebeck coefficients (∼100 μV/K) were observed near room temperature.